Related
Not sure what I did but I updated the the new ROM 3.12...
In the LOCK option in settings, I have the ability the set the battery timeout to 12 hours. Now it have gone back to default and not sure if it was due to me loading Pocket Toolman and Tweak2k.net after the update. I cannot find the manual reg setting to change the time. Can anyone give me that reg tweak?
Thx
Sorry...I titled it wrong but I meant the "lock" option
I looked through the threads and didn't see any like this so I hope this will help those of us who need it
I have researched a number of different threads on different forums and was hoping that all registry tweaks could be posted in one spot.
So if you know of any that would help please post them here. If I missed another thread like this please let me know.
Thanks in advance for everyones input!!
Registry Edits
Disable start-up sound / change it -
[HKEY_LOCAL_MACHINE\Software\HTC\HTCAnimation] Rename both 'StartupGif' and 'StartupWav' to new values, or leave blank to disable.
Increase your screen's sensitivity.
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel] change PressureThreshold. Default is 37 Decimal, it is reported 240 decimal is a good new value for this.
You can disable auto-wakeup when keyboard is opened.
[HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Keybd] Create new dword "SlideWakeup" with value of 0 and soft reset. To revert, delete the key or set it's data to 1.
Change the soft keys on the home screen.
[HKEY_LOCAL_MACHINE\Software\HTC\Manila], change HomeLSKPath and HomeRSKPath. HomeLSKText/HomeRSKText = the text.
Increase TouchFlo's sensitivity, so you don't have to push as hard to scroll.
[HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings] increase FingerPressure. Default is 16. I am having good luck on 128, I may raise it higher. Higher = more sensitive, lower = less sensitive.
**Only confirmed for Sprint (From me, I'm sure other carriers are different)**
Hack Internet Sharing to work:
[HKEY_LOCAL_MACHINE\Comm\InternetSharing] Delete Extension key, set/create MaxCMCon=0 (decimal). [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings] Set ForceCellConnection="Sprint"
You can make your phone stop making noise when you enable/disable the radio.
[HKEY_CURRENT_USER\ControlPanel\PhoneExtendFunction \CDMA\FlightModeOnOff] and change Sound_on and Sound_off to desired sound, or blank for no sound.
Enable/Disable mute call when phone is flipped over -
[HKEY_LOCAL_MACHINE\Software\HTC\PHONE] Set FaceDownMuteRing=1 to enable, or =0 to disable.
Disable SMS Sent Notification:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settin gs] Set SMSNoSentMsg to 1
I just copied a few things that I have used frequently. Here are the links to two threads that have the info posted above. Please click the "Thanks" button for both Baffles and iTouch24. They took lots of time making these useful threads.
http://forum.ppcgeeks.com/showthread.php?t=42730
http://forum.ppcgeeks.com/showthread.php?t=42141&highlight=change+windows+boot
HAVE FUN!
Come on everyone, post your registry edits. This will help everyone.
Thanks!!
Great posts so far. Unfortuneately I have nothing to offer ;c(
This thread didn't get much attention -lol.
How about this: Post any Reg Edit that is not already in Adv. Cfg, DTweak, or TF3D Cfg. Most if not all of these are already in those programs.
How about this.....post everything in one spot so people do not have to search through 10 different threads.
I'm calling for the assistance of anyone knowledgeable in registry hacks. I was looking through the entire registry and came across a key that I thought may prove rather useful to a reg hacker. [HKLM->System->State->Phone] and the DWORD to look for is Signal Strength and Signal Strength Raw. I tried changing the value of Signal Strength from 10 to 500 and didn't notice a change. I own the XV6850, verizon's touch pro, and was wondering if it would maybe have an effect if I changed the values and then dialed *228 opt.2 to update roaming list? would someone look into this and see if this might be useful?
mnasr87 said:
I'm calling for the assistance of anyone knowledgeable in registry hacks. I was looking through the entire registry and came across a key that I thought may prove rather useful to a reg hacker. [HKLM->System->State->Phone] and the DWORD to look for is Signal Strength and Signal Strength Raw. I tried changing the value of Signal Strength from 10 to 500 and didn't notice a change. I own the XV6850, verizon's touch pro, and was wondering if it would maybe have an effect if I changed the values and then dialed *228 opt.2 to update roaming list? would someone look into this and see if this might be useful?
Click to expand...
Click to collapse
Id like to know about this too. Itd be nice if we could boost the signal strength a little bit because I have noticed a drop since I switched over to the touch pro. If its not possible by registry then what could we do to increase the signal strength?
Has anyone found out the reg edit for internet sharing on the VZW TP?
deviantirish said:
Has anyone found out the reg edit for internet sharing on the VZW TP?
Click to expand...
Click to collapse
Install Internet connection sharing...
I seen an edit to extend the keyboard blacklight timeout, but when i changed it, it did nothing. I dont want my keyboard light to shut off so quick, or at all really when my phone is open. Anyone know how to get that working?
cforster said:
Disable SMS Sent Notification:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settin gs] Set SMSNoSentMsg to 1
Click to expand...
Click to collapse
If you want to customize the notification rather then disable altogether.
[\HKCU\ControlPanel\Notifications\Default] set Options to one of the values below (Default on Sprint was 13)
Changes take effect immediately
0 - Icon
1 - Icon and Audio
2 - Icon and Vibrate (SSS)
3 - Icon, Audio and Vibrate (L)
4 - Same as 0
5 - Same as 1
6 - Same as 2
7 - Same as 3
8 - Icon and Bubble
9 - Icon, Bubble and Audio
10 - Icon, Bubble and Vibrate (LLS)
11 - Icon, Bubble, Audio and Vibrate (L)
12 - Bubble
13 - Bubble and Audio
14 - Bubble and Vibrate (SSL)
15 - Bubble, Audio and Vibrate (L)
The following do not reset the keyboard after sending message. What that means is that as you type and the software is doing the word complete, after sending, the word complete dialog still shows on the screen for the last word typed.
16 - Icon and No KB Reset
17 - Icon, Audio and No KB Reset
18 - Icon, Vibrate (SSS) and No KB Reset
19 - Icon, Audio, Vibrate (L) and No KB Reset
20 - Same as 16
I stopped trying values when I got to 20 since from 16 on they appeared to be the same as 0-15 but with the KB issue I mention above. Also, all the S's and L's represent quantity and length of the vibrations. I tried each setting about 10 times and 3 of the 10, the last vib was opposite of what I show. In most cases though, it did as I show above.
After I found these, I did a search and found that a few others had found and posted the above as well. So I wasn't the first, but I did find it on my own.
Enable Roaming Only option
Some networks may already have this enabled already, but Sprint didn't by default.
[HKLM\Software\OEM\InitProv\PhoneSetting] change ItemCount
Change from 2 to 3, save and soft reset. After it reboots, simply goto,
This will add a third option called Automatic-B which is Roaming Only in disguise. To switch from Sprint Only (or your network only) to Roaming Only, goto the following,
Start > Settings > Personal > Phone > Services > Roaming
Again, the location is on my phone which is a Sprint Touch Pro, so the exact location under the Start button may be different for your network.
Also be aware that some networks frown upon more roaming minutes then standard minutes so be aware of which setting you are currently running.
I found this over at PPCGeeks.com
smotrs said:
Enable Roaming Only option
Some networks may already have this enabled already, but Sprint didn't by default.
[HKLM\Software\OEM\InitProv\PhoneSetting] change ItemCount
Change from 2 to 3, save and soft reset. After it reboots, simply goto,
This will add a third option called Automatic-B which is Roaming Only in disguise. To switch from Sprint Only (or your network only) to Roaming Only, goto the following,
Start > Settings > Personal > Phone > Services > Roaming
Again, the location is on my phone which is a Sprint Touch Pro, so the exact location under the Start button may be different for your network.
Also be aware that some networks frown upon more roaming minutes then standard minutes so be aware of which setting you are currently running.
I found this over at PPCGeeks.com
Click to expand...
Click to collapse
I've heard of horror stories of Sprint dropping customers for roaming over half the time. I guess their reasoning is, if they are roaming that much, they'd be better off with a different carrier.
Yeah, I switch mine quite a bit, but no way near half the usage. But it's definitely something to be aware of if you use the function. The sad thing is, allot of Sprint phones have it available by default. I was at a Sprint store the other day and just walked down the line checking each phone they had. The majority of them add the function available.
smotrs said:
Enable Roaming Only option
Some networks may already have this enabled already, but Sprint didn't by default.
[HKLM\Software\OEM\InitProv\PhoneSetting] change ItemCount
Change from 2 to 3, save and soft reset. After it reboots, simply goto,
This will add a third option called Automatic-B which is Roaming Only in disguise. To switch from Sprint Only (or your network only) to Roaming Only, goto the following,
Start > Settings > Personal > Phone > Services > Roaming
Again, the location is on my phone which is a Sprint Touch Pro, so the exact location under the Start button may be different for your network.
Also be aware that some networks frown upon more roaming minutes then standard minutes so be aware of which setting you are currently running.
I found this over at PPCGeeks.com
Click to expand...
Click to collapse
i was wondering if anyone knew how to get the xv6850, verizon's htc touch pro, to force roaming because i tried this hack and it didn't work. this would be really nice to do if i could switch networks while at home cause i get barely any signal in my apt.
When you went to the registry location, you may or may not have seen several different ItemName options. For instance, on my phone there were the following,
ItemName1 = Spring Only
ItemName2 = Automatic
ItemName3 = Automatic-B
ItemName4 = StandardYours may differ by having more or less then what I show or they could be in a different order. Also, take a look at the following location and see what ItemName entries exist. It may be listed there but need to be added to the original location manually.
[HKLM\Software\OEM\PhoneSetting\NetworkService]
If you only have 2 ItemName entries listed, then you could add the third by doing the following,
Change the ItemCount from 2 to 3
ItemCount = 3add the following String and Dword to this second location if not already present,
ItemName3 = STRING(Automatic-B)
ItemValue3 = DWORD(3)Then change the ItemCount in the first location to 3
ItemCount = 3and add the following String and Dword to the first location,
ItemName3 = STRING(Automatic-B)
ItemValue3 = DWORD(3)
But let us know what values you currently show in both locations and we can probably figure it out.
Again, I got all this information from the PPCGeeks thread I mentioned previously.
smotrs said:
When you went to the registry location, you may or may not have seen several different ItemName options. For instance, on my phone there were the following,
ItemName1 = Spring Only
ItemName2 = Automatic
ItemName3 = Automatic-B
ItemName4 = StandardYours may differ by having more or less then what I show or they could be in a different order. Also, take a look at the following location and see what ItemName entries exist. It may be listed there but need to be added to the original location manually.
[HKLM\Software\OEM\PhoneSetting\NetworkService]
If you only have 2 ItemName entries listed, then you could add the third by doing the following,
Change the ItemCount from 2 to 3
ItemCount = 3add the following String and Dword to this second location if not already present,
ItemName3 = STRING(Automatic-B)
ItemValue3 = DWORD(3)Then change the ItemCount in the first location to 3
ItemCount = 3and add the following String and Dword to the first location,
ItemName3 = STRING(Automatic-B)
ItemValue3 = DWORD(3)
But let us know what values you currently show in both locations and we can probably figure it out.
Again, I got all this information from the PPCGeeks thread I mentioned previously.
Click to expand...
Click to collapse
i tried ur method for my phone and now i have a permanent unread email notification and every time i soft reset my phone the itemvalue2 is set to 4 and i have to change my network service to automatic manually. not only that but the changes that i added to the registry aren't even visible for me to alter or remove anymore after i did the soft reset. do you have a solution for this before i have to hard reset??
if you can post your registry backup to a post that i can download, i might be able to restore it but only if you have the verizon htc touch pro xv6850. if you don't have it please try to find it for me because it would be a huge pain for me to have to do a hard reset.
mnasr87 said:
if you can post your registry backup to a post that i can download, i might be able to restore it but only if you have the verizon htc touch pro xv6850. if you don't have it please try to find it for me because it would be a huge pain for me to have to do a hard reset.
Click to expand...
Click to collapse
Unfortunately, I have the Sprint Touch Pro, so my registry would not be compatible with yours. Were you able to delete the additions you made or did you simply change a value of one of the entries?
If it helps, these were the settings I had at the following locations;
[HKLM\Software\OEM\InitiProv\PhoneSetting]
ItemCount = DWORD(3) <-- Only thing I had to change on my phone, from 2 to 3)
ItemName1 = STRING(Sprint Only)
ItemName2 = STRING(Automatic)
ItemName3 = STRING(Automatic-B)
ItemName4 = STRING(Standard)
ItemValue1 = DWORD(1)
ItemValue2 = DWORD(4) <-- Yes 4 (don't know why)
ItemValue3 = DWORD(3)
ItemValue4 = DWORD(4)
ServiceName = STRING(Roaming)
ServiceTitle = STRING(Phone: Roaming)
[HKLM\Software\OEM\PhoneSetting\NetworkService]
ItemCount = DWORD(3)
ItemName1 = STRING(Sprint Only)
ItemName2 = STRING(Automatic)
ItemName3 = STRING(Automatic-B)
ItemValue1 = DWORD(1)
ItemValue2 = DWORD(4) <-- Yes 4 (Again, not sure why)
ItemValue3 = DWORD(3)
ServiceName = STRING(Roaming)
ServiceTitle = STRING(Phone: Roaming)
Hope this helps. If still a problem, I'm gonna edit the thread above and remove the edits and direct people to the PPCGeeks thread instead.
yeah the issue is that the additions i made disappeared and it won't let me change the settings back the way they were. i also have that annoying unread email notification on the tf3d that i'm not sure how that got there.
This project is no longer developed!
Profile Switch is a small program that stores up to 99 different settings for Phone, WiFi, Bluotooth, Data-Connections, vibrate, silent, eg. and create shortcuts to switch directly. Up from 1.3 you can switch automatically at certain times and days. The complete profile will be changed only with one click.
Every profile can:
switch phone, bluetooth, WiFi and data connections
auto run on two different times every day or only on selected days
check your appointments if there is a category to disable auto run
switch back to another profile in a given timespan
start up to 3 programs
close up to 5 processes
change the system and ringer volume
change the ringer script
change the backlight settings for batterie and ac power
add a shortcut in startmenu to itself
disable auto starts of profiles if one 'all day event' with selected categories is found, you can select up to 3 categories
start a profile if a appointment with selected categories will start or end, you can select up to 3 categories
Additional you can:
disable data in roaming
switch to a profile if the phone comes back to the home network
run a profile once after a given timespan
disable all autoruns up to a given day and time
start a profile if a pc-connection is detected or lost
start a profile if a headset is connected or disconnected
use seperate scripts to vibrate if new calls, emails or sms are incomming
use separate script to vibrate for reminder (appointments and tasks)
use categories from your contacts to mute (or not) incoming calls
The pictures are from version 1.14.0.0:
All screenshots small (0,6 MB) - All screenshots large (1,9 MB)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only tested this application on my HTC HD2, it works in portrait and landscape mode. If you use this on another device, please check the features carefully, especially the block of data when this option is used.
You will find two links in the startmenu folder:
- Profile Switch - the application
- Close Data - a little helper, shut down existing data connection without any visible window. It does not prevent new connections are established (the same funktion like "Close all connections" in the app.
You can edit the language files in the program folder and/or create an new one. For a new translation just copy the 'english.lng' to 'french.lng, spain.lng ...'. But edit/translate only everything after the '=', not on the left side of the '='! Save the file in unicode-format.
Please note:
Requirements: .NET CF 3.5.
For update only install the new version.
Enabled network connections in the settings menu ('Do not switch networks' ) prevent these connections for any switching.
Shortcuts are saved in startmenu\ProfileSwitch\Profile name.
Backups are stored in the progamm folder as 'Backup_YYYY_MM_DD_hh_mm_ss'.
Restore a backup will delete your shortcuts stored in startmenu, these must be set new.
If you stored a profile as shortcut, the profile name cannot be edited until the shortcut is removed.
If you uninstall the application, please delete first the saved shortcuts.
If you want to use automatically switching enable this funktion in settings - Autorun settings ('Activate switch on time').
Set time to '00:00' will disable automatically switching for this day.
Important: If you for example sitting in an airplane, you must disable this feature! Otherwise it can turn off the flight mode and your phone on!!
Using 'Profile switch once' will ignore any settings of 'Activate switch on time'.
If you set the autoswitch time in more as one profile at the same time, only the first profile will switch. The rule is: 1. Run once, 2. The other times up from profile 1 to 99.
Don't worry about a new entry in your autostart folder. CheckProfile is only used to set the next autoswitch after reboot or after turned on the device. It don't stay in memory.
If you use the settings for system and/or ringer volume: My device (HTC HD2) has the option 'Only use one volume'. If you select this, the device will not show this correctly, if different volumes for system an ringer are set in the profile. Hope this also works correctly on other devices.
Special icons for each shortcut are now separatly. Please download them for your operating system. Windows 6.5.X - store the files in the applications subfolder 'Icons', the files for Windows 6.1 must be stored directly in the progam folder.
If you change icons for profile and the shortcut already exists, any links to them and the shortcut itself must be deleted and be rebuilt, otherwiese there are no effects taken. In Windows 6.1 you can't edit/change them!
Special Icons are only shown for the first 10 profiles.
If you get an error while saving a shortcut to your start menu like this: 'Saving the file failed' - please remove all special characters from the profile name, it's used for the file name.
Please do not restore any registry settings manually, always use the backup and restore function. If you restore parts of older entrys - the key names and values can be changed automaticly by an update. In this case you must delete the complete section "ProfileSwitch" or restore an older backup created by ProfileSwitch before you manipulate the registry.
If you select any program or process for closing with a profile, this program must be running currently, otherwise it will not be displayed.
Please use the function "Close program" very carefully. Only select processes you know!
The timespan you set in "time to look back if the device was turned off while starting a profile automaticly" must be smaller then the smallest time between two autorun times.
What the program does not and probably never will do:
Switch the band between GSM and UMTS (auto): There are too many differents between several devices.
Profile switching based on location or GSM tower-ID's: To do this, the application (or a little bit of this) must constantly stay in memory and check the location.
Support for any PIN code protected unlocking the phone.
Other languages:
Polish language from mobione.pl team: http://forum.mobione.pl/. You can get the latest version here: http://www.mobione.pl/dostep/Polish.zip.
Italien translation from safato: http://forum.xda-developers.com/showpost.php?p=8303246&postcount=238.
Spanish translation from tonybest: http://forum.xda-developers.com/showpost.php?p=8602795&postcount=299.
French translation from Albator V: http://forum.xda-developers.com/showpost.php?p=9396283&postcount=397.
Hungarian translation from zoliwr: http://forum.xda-developers.com/showpost.php?p=9311710&postcount=386.
Czech translation from Stevik: http://forum.xda-developers.com/showpost.php?p=15875977&postcount=689
Any Questions? Please don't ask me via PM about any problems. Please, please use this forum.
Change Log:
1.17.0.0
[+]The function 'Mute incoming call by category' from the beta version integrates. You can select this function in the vibrate settings and also in every profile. Please note: Don't forget to select the categories!
[+]One additional profile can run if roaming starts.
[+]New entry 'Do not switch' in the profile selection for end roaming.
[-]Using the exclusion function 'All day event' for autoswitch do not work correctly if more then one entry matches on two consecutive days.
[-]Sometimes the program hangs while exiting the vibrate settings.
1.16.0.0
[+]Using the vibrate functions no longer needs a program staying in memory.
[+]Added vibrate functions for missed calls.
[+]Added repetitions for all reminders.
[+]Added vibrate functions to set the sound and other settings for the reminders directly in Profile Switch.
[+]Settings to hide or show the main buttons on homepage.
[+/-]Settings menu now divided into several sub-menus.
Please note: If you enable the vibrate functions, Profile Switch will save your currently settings and lock these settings in windows. Disabling will restore your saved settings.
1.15.1.0
[-]Repetition of sequence (new emails and new sms) does not work.
1.15.0.0
[+]Added an option to use also vibrate settings for the reminder (appointments and tasks).
[+]Vibrate functions during calls now can set separately.
[+]Added a function to choose date and time for 'Switch profile once'.
[-]Function 'switch back to current profile' can crash.
1.14.6.0
[-]After a soft reset and also using the custom vibrate settings the program to watch incomming calls can crash.
1.14.5.0
[+]Now using the new Sense Interface SDK v1.50.
[-]After a soft reset and also using the custom vibrate settings the program to watch incomming calls etc. was not restarted.
[-]Using the custom vibrate settings for calls and a profile is used to set the sound profile to 'ring and vibrate' this profile was not correctly detected on the startpage.
1.14.4.0
[-]If vibrate notifications are used and two new messages appears exactly at the same time, profilevib.exe starts twice and can crash if logging is enabled.
1.14.3.0
[-]Ringtone settings are lost.
1.14.2.0
[-]Switching at end of an appointment doesn't work if it is a recurrence type.
1.14.1.0
[-]Switching at begin/end of an appointment doesn't work every time.
1.14.0.0
[+]You can run a profile if a headset is connected or disconnected.
[+]Added a toggle function for phone, wifi, bluetooth and data.
[+]Added an option to ignore categories for 'Check appointments'. Just leave the categories empty if you want to use this.
[+]Added a function to use separate scrips to vibrate for new incomming calls, emails and sms. You found these new vibrator settings in 'Settings' - 'Vibrator-Settings'.
To use this new functions, first you must find out the vibrator-adress of your device. Change the adress value and hit 'Test', your device must vibrate.
The script is: 1. value=timespan for vibrate, 2. value=timespan for silence, 3. value=vibrate, 4. value=silence, and so on, times in milliseconds, separator=','. The additional last value is the repeat value (0=without repeat), this value is always required. E.g.: 300,500,300,1000,3
To realise this, a part of Profile Switch must stay in memory to observe a few registry entrys of incomming calls and messages. Similarly it controls the sound settings for all these events. This only is needed if one of these functions is set to 'on', otherwise there is no program in memory.
[-]Error if you select a program to start with a profile and there are dots in the filename.
1.13.0.0
[+]Separately ringtone scripts for every profile.
You are able now to change the ringtone scripts with every profile. The integrated functions (like HTC HD2) are:
Ring and vibrate (Script "av0pw3r")
Vibrate then ring (Script "v3w3apw3r")
Ring only (Script "apw3r")
Ring only once (Script "p")
Ring ascending (Script "c50apw3c150r")
Please note that all these scripts only used by windows if the sound profile is set to "full on" (ring and vibrate).
Additional you can create up to two user defined scripts (please see "settings") for any other ringtone by using any combination of this commands for the script ("r" is only usefull at the end of script):
a = activate device
cN = set volume to N in percentage max volume
fN = flash notification LED for N seconds
p = play ringtone
r = repeat
vN = vibrate for N seconds
wN = wait for N seconds
1.12.2.0
[-]Corrected a few things to disable data in roaming continuously, I think this function is ok now.
[-]Error if you first set times for autorun a profile and then later disable this function in settings.
[+-]Some other small changes.
1.12.0.0 beta
[+]Disable data in roaming continuously. *) Beta!
[+]Switch to a profile if the phone changed back from roaming to your home network. *) Beta!
[+]Start a profile if appointments with selected categories will start or end.
[+]For Omnia 2 (i8000) users: You can reduce the programs in the selection list. May be it helps?
[+]You can reset a profile to it's default values (except the profile name).
[+]Added a setting for "BatteryTimeoutUnchecked". Please have a look into the description for this.
[+]Added a brief description.
[+][-]Changed the function to read the language.
[+][-]Some optical improvements.
[+][-]Setting 'Wait for Phone' removed, no longer needed.
Thanks rlmouse, lookes like something I can use. Gonna try this. Thanks for the effort and sharing.
Hi thanks for your work, I will also give it a try. I hope it will work with my dualsim ...
I will give feedback soon.
If you like also in German
Homer-S said:
I hope it will work with my dualsim ...
Click to expand...
Click to collapse
No idea. But it is only one device. I think, it should work, but there is currently no chance for me to test it.
I will give feedback soon.
Click to expand...
Click to collapse
Yes please.
OK
Installation without issues
adjusting the profiles is ok
switching between profiles seems to work probably
Question:
can you maybe add an volume adjustment for phone & sms ?
how can I use the "one click change"? can I make shortcuts to switch directly to "profile 1" or "profile2" etc
Thanks so far
Homer-S said:
can I make shortcuts to switch directly to "profile 1" or "profile2" etc
Click to expand...
Click to collapse
Please give me the next weekend for this options.
can you maybe add an volume adjustment for phone & sms
Click to expand...
Click to collapse
Hmmm. Vibrate or silent eg. are simply. I think volume adjustment is very difficult for me. First i must find a solutions for this, working properly on diffrent devices. (Eg.: Two slider for system and ringer or one slider for both)
Hi,
installed this on an i900 with custom 6.5.3 ROM. Installation and customizing the profiles works good. When i activate a profile with "WiFi on" the following error occurs:
Code:
Profile Switch.exe
FileNotFoundException
Message text unavailable. Resource file
'Microsoft.VisualBasic resources' not
found.
bei
Microsoft.VisualBasic.Interaction.Shell(Str
ing PathName, AppWinStyle Style,
Boolean Wait, Int32 Timeout)
bei
IGS_Verbindungen.Verbindungen.Switc
hAll(Int32 Bt, Int32 WiFi, Int32 Phone,
Int32 Data)
bei
IGS_Verbindungen.Verbindungen.Profil
eClick(ISenseListItem Sender)
bei
IGS_Verbindungen.Verbindungen._Lam
bda$__12(Object a0)
bei
StedySoft.SenseSDK.SensePanelItem._
notifyClick()
bei
StedySoft.SenseSDK.SensePanelItem.O
nMouseUp(Int32 x, Int32 y)
bei
StedySoft.SenseSDK.SenseListControl.
OnMouseUp(MouseEventArgs e)
bei
System.Windows.Forms.Control.WnPro
c(WM wm, Int32 wParam, Int32
lParam)
bei
System.Windows.Forms.Control._Intern
alWnProc(WM wm, Int32 wParam,
Int32 lParam)
bei
Microsoft.AGL.Forms.EVL.EnterMainLoo
p(IntPtr hwnMain)
bei
System.Windows.Forms.Application.Run
(Form fm)
bei
IGS_Verbindungen.Verbindungen.Main()
WiFi works, but the software doesnt show the current profile.
holybabel said:
Hi,
installed this on an i900 with custom 6.5.3 ROM. Installation and customizing the profiles works good. When i activate a profile with "WiFi on" the following error occurs ...
WiFi works, but the software doesnt show the current profile.
Click to expand...
Click to collapse
Sounds like your .net is missing something! Do you use .NET CF 3.5?
I tried to install .NETCFv35.wm.armv4i.cab but it says that a newer version is already installed, so i think the latest version is integrated in my ROM.
holybabel said:
I tried to install .NETCFv35.wm.armv4i.cab but it says that a newer version is already installed, so i think the latest version is integrated in my ROM.
Click to expand...
Click to collapse
Do you get the same error when you try: 'Connections' - 'Close all connections'? I think, there are a few little diffrent between the .Net versions.
holybabel said:
I tried to install .NETCFv35.wm.armv4i.cab but it says that a newer version is already installed, so i think the latest version is integrated in my ROM.
Click to expand...
Click to collapse
Ok, maybe found. Can you please test this exe stored in the attached zip-file? Just extract and copy the exe into the program dir (overwrite the existing file).
WOW...now it works perfect for me....
Wishlist:
Volume adjustment (vibrate, silent, ring tone)
One Click Change (Shortcuts to switch to profileX)
I've upload the complete new version. Some translations are missing, if you use only the new exe.
holybabel said:
Volume adjustment (vibrate, silent, ring tone)
Click to expand...
Click to collapse
I must figure out that functions before.
One Click Change (Shortcuts to switch to profileX)
Click to expand...
Click to collapse
Currently working on it.
Volume adjustment is more important for me. One-Click-Change is unnecessary for me since application can start on "Change-Profil-Page".
Version 1.2.0.0 is online
Change Log:
1.2.0.0
[+] Profiles now with settings for vibrate, silent, both and also for no change
[+] Profiles can be saved as shortcut in startmenu
Looks like very good software.
The minimum is:
volume adjustment - separate for ringer and system
profile based on - appointment, time + bonus - location bases - GSM base stattion number
backlight adjustment -
switch for enabling & disabling wireless - data, wifi, BT, phone
just look at the ageye.de G-profile, that is the most powerful profile switcher at this time, but unfortunately it is paid application. But the best one.
miland said:
Looks like very good software.
The minimum is:
volume adjustment - separate for ringer and system
Click to expand...
Click to collapse
Coming soon.
profile based on - appointment, time + bonus - location bases - GSM base stattion number
Click to expand...
Click to collapse
I don't like software who stays always in memory. And, to get the current tower-id every time, you must run the device in unattached mode. That drains the batterie.
backlight adjustment -
switch for enabling & disabling wireless - data, wifi, BT, phone
Click to expand...
Click to collapse
switch for enabling & disabling wireless - data, wifi, BT, phone are included.
just look at the ageye.de G-profile, that is the most powerful profile switcher at this time, but unfortunately it is paid application. But the best one.
Click to expand...
Click to collapse
Yes, I know G-Profile. But it often goes online, that is nothing for me. So I've written this small program itself.
Looks good - am going to try this out.
Downloading now .................
How do i set the English language file. I just deleted the "Deutsch.lng" in the install folder. Still struggling if it still has a setting but it's all German.
EDIT:
Nevermind i found it! "Sprache" It's looks good. Thanks!
Keep updating this great app! A MUST HAVE.
rlmouse said:
Coming soon.
I don't like software who stays always in memory. And, to get the current tower-id every time, you must run the device in unattached mode. That drains the batterie.
switch for enabling & disabling wireless - data, wifi, BT, phone are included.
Yes, I know G-Profile. But it often goes online, that is nothing for me. So I've written this small program itself.
Click to expand...
Click to collapse
Well it is of course your decision, but my thought is, that profile software must have function is time based switching. I want to have 3 or 4 different profiles a day based on time and I can't imagine I am switching manually.
Anyway, the backlight and volume switching are truly basic functions.
And the last suggestion, please set the default language to English. I am from Czech rep. so German is not problem for me, but maybe for the rest of the world it is.
I thought I had tasker figured out, but can't seem to get Bluetooth to come on, or wifi to shut off, or screen brightness to switch to AUTO when I plug into my car dock.
I have the first part set right, I believe. I have the Profile turn green (activating) when "Docked" [car]. This seems to work. However none of my tasks work. I have it set to Auto Brightness [on], Bluetooth [on] and WiFi [off].
I also had exit tasks, which were the opposite of above (Auto Brightness [off], Bluetooth [off] and WiFi [on]).
These have no effect, but tasker does prevent my car panel from launching, which I like. Any advice?
Well, it seems that I can't launch apps via tasker widgets either. Seems like nothing I set for tasker to actually DO works. However, the conditions seem to be met (the profile names turn green). Can anyone assist?
Not sure whats going on with yours. You don't seem to be alone though. I would try to go to Apps > Tasker, clear all data/cache.
Then make a simple task. Like mute when you hit volume down button.
Here is a profile you can import to do everything you wanted:
hxxp://db.tt/CGT4WFI
State: Docked [Car]
Enter
1. Load App - Set: Car Panel
2. WiFi - Set: Off
3. Bluetooth - Set: On
4: Auto Brightness - Set: Off
Exit
1. Kill App - Set: Car Panel
2. WiFi - Set: On
3. Bluetooth - Set: Off
4: Auto Brightness - Set: On
vypurr said:
Not sure whats going on with yours. You don't seem to be alone though. I would try to go to Apps > Tasker, clear all data/cache.
Then make a simple task. Like mute when you hit volume down button.
Here is a profile you can import to do everything you wanted:
hxxp://db.tt/CGT4WFI
Click to expand...
Click to collapse
I'll try clearing data/cache on it and see if that helps. As for your profile, thank you. I'll give it a shot later today. If it works, I will tweak it though.. I actually prefer the car panel to stay off.
Would be cool if on "Docked", it could switch to a different Sense "Theme" I created just for being in the car. This theme could have links to whatever I wanted on the home screens, instead of the default car dock stuff. Know of a way to do that?
if tasker can change sense home screens after certain conditions i may have to reconsider my potential purchase haha, that would be awesome.
I haven't found a way to do that. Also, I can't get tasker to perform any actions anyway... Don't know what's going on.
---
Sent via Thunderbolt
The only way I know of to do that is to load multiple launchers. Set each one up for a new environment, then make a rule to open that one.
There are some interesting tips and tricks for this phone, and some observations I've made. This is definitely not a complete list, I just wanted to put some things that keep popping up in various threads into one central place.
TIPS:
Buy a screen protector and case! You will significantly increase the longevity of your phone.
When you're not using it, turn off Wi-Fi, 4G, and GPS. It will improve your battery life significantly.
If using the stock messaging app, you can improve load time and performance by limiting the number of messages saved in Messages -> Settings -> General -> Delete old messages.
Under Settings -> Developer options, there are several options which can improve performance on your phone, such as reducing transition time, enabling GPU rendering, and destroying background activities.
For those of you who came from Sense 1.0, you can now backup and restore your dictionary and messages to the SD card.
Messages: Messages -> 3 Dot -> Back up SMS
Dictionary: Settings -> Language and keyboard -> HTC Sense Input -> Personal dictionary -> Sync personal dictionary
TRICKS:
Disable bloatware while on stock: To disable any apps which you are forced to have on your phone but you don't use, go to Settings -> Apps, and go to each app you don't want, uninstall updates if it has any, then click Disable.
Safe mode: Restart your phone, hold volume down starting from when the screen first goes dark until the OS is loaded. If done successfully, you will see the words 'Safe mode' in the bottom of your screen.
EPST: Dial ##778 on your phone and edit developer options and programming codes. You can seriously screw up your phone if you don't know what you're doing, so proceed with caution.
Change number of home screens: Touch your home button twice. A display of all your home screens at the same time will appear.
To remove screens, long-press any screens you no longer want (you have to leave your primary screen with the small picture of the house on it), and drag it to the top to 'Remove'.
To add more panels when you have less than 7, which is the maximum, touch 'Add Panel' at the top. You can rearrange these to any order you wish.
HBOOT: To access HBOOT, turn off Fast boot in Settings -> Power, hold your power button, hit 'Restart', and when the capacitive buttons at the bottom turn off, hold the Volume Down button until it loads HBOOT.
Quickly change all sounds: You can quickly change all ringtones, notifications, and alarms by going to Settings -> Personalize -> Sound tab at the bottom.
Global phone: To enable Global phone mode, go to Settings -> Call, and change Preferred Network to Global.
OBSERVATIONS:
As with every phone model, every individual unit is not created equal. You will encounter a problem with your phone, most likely one easily rectified once we get root. You might have slow Wi-Fi, an imperfectly-fitting case, or any number of things. If it's a hardware issue, you will likely discover it before your 14 day exchange period is up. Don't be afraid to exchange it! If it's software-related, wait for root and we'll see what can be done.
Some things that were handled by the OS in previous iterations has to be done manually now, such as automatically deleting blank pictures from the Gallery app that were deleted with a file explorer or on the computer. It can be a nuisance, but without root, we can't change anything right now.
Suggestions to this list are welcome. Some things some of us take for granted are great additions to this list for the uninitiated.
Stupid question but how to turn off 4g?
Sent from my ADR6410LVW using Tapatalk 2
devinhfox said:
Stupid question but how to turn off 4g?
Sent from my ADR6410LVW using Tapatalk 2
Click to expand...
Click to collapse
There are multiple ways. I prefer adding the one-click Widget to my farthest right home screen (I reduced mine down to 3 screens, which I'm going to add to the main post how to do), accessed by long-pressing an empty location on a home screen, Widgets tab -> Settings (HTC) -> Mobile Network. You can also access the on/off switch via the pull-down tab (or via the app drawer) -> Settings -> Mobile Network on/off.
If you want to only turn off 4G and leave 3G on, you can download 4G Toggle and change the setting to 'CDMA only'. This still saves battery while allowing you access to the mobile network at slower speeds.
I updated the list again. How did these two posts get to page 4? Ridiculous.