Can anyone please advise on setting my Himalaya as a pager(through SMS)??? Can't seem to find any posts on this specific topic. Thanks in advance for the help
Interesting.. how do you suppose to do that? Disable your ability to receive phone call? But still able to receive SMS?
Hmmm.. interesting.. maybe you can do
(1) Make your ring tone silent (e.g. use a silent WAV as ring tone) but put a loud and long WAV for your SMS.
(2) Use the divert call feature, Setting -> Phone -> Services -> Call forwarding. Check "Forward all incoming phone call to", and put in a fake number. So, when anyone tries to call you, they will be diverted into the fake number. (e.g. for girls whom are getting irritating calls, you can use this method). However, you still have your SMS working.
Another option (not every phone has this, but WM5 seems to have) would be Setting -> Phone -> Services -> Call Barring -> Block Incoming calls.
Better test your thing before really using it (e.g. try SMS it). Haven't try these technique yet.
Anyway, pity that this phone is being used as a pager though. It is like buying a refrigerator use it as a cupboard.
pager
I probably phrased my question poorly. I wanted to be able to receive a page as an SMS message . I meant to do that in addition to the phone/email connections. Didn't mean to suggest to disable the phone at all. Thanks
You'll be needing an app on this page http://sharewareconnection.com/titles/alpha-paging.htm
SNPP protocol is available on the GSM band naturally, but you will need special session/application software for compiling data for use on the protocol.
I doubt you can do that. Firstly, you will need a station/provider to have a paging service, so you will have a page station for people to call to, you also need them (provider) to send you the signal. And, I'm pretty sure that you can't just accept any pager signal easily with a standard consumer devices and some cool software (esp that you still want the phone feature) as there are security features built into the page signal for better data transfer efficiency and privacy.
I think you will be carryign a pager for a while
Hey guys, I put this over in the regular titan forums, but I wasn't sure where it belonged.
I am wondering if there is any way to send all incoming calls to voicemail when I am using PDAnet to get online. I know there is a PDAnet setting to "allow calls when connected" but even if I uncheck this, calls still come through and discconect my internet.
The reason I'm posting this here is because if something specific to PDAnet isn't available, or possible, is there anything that I can do to the phone to not have incoming calls disconnect my internet connection? I had a Motorola Q for a little while, and there is a "bug" that actually does this automatically (sends call to voicemail while on EVDO). It was a setting in the DEBUG menu, in the field test option, called DDTM, and it was by default on (I think), and so people had to change that to off (could be switched) to allow incoming calls. It was perfect for me though. Now, I think I tried looking for a DDTM setting in the mogul and I had found it a while back, but I dont think it did anything with regard to my situation. So my questions are:
Is there anything with PDAnet that I can do besides the setting I talked about? Registry or something...?
If nothing with PDAnet, then does anyone know how to change the DDTM setting on a mogul? I got into the DEBUG menu (##33284#) and I didnt find any DDTM setting there.
Besides the DDTM setting (since it hasn't worked for me in the past) is there any other method you guys can think of that will do what I want?
Thanks!!
Call Filter
Yes there is There is a program called, Call Filter. you should be able to google it an find it.
SPB Phone Suite can also filter calls.
My understanding of call filter programs is that they screen the calls once they come to the phone and then prevent the phone from ringing. I would imagine this would still disconnect my internet services. I messed around a little with SPB phone suite, and I have nexvisions rom, which comes with Call SMS blocker (it has a call filter option). With SPB phone suite with the filter enabled, I couldn't even connect via PDAnet, it gave me an error 619 or something. With the Call SMS blocker, the program didn't block my incoming call at all, so that's more the program's fault. But am I mistaken in thinking that a call filter program would not work for my needs?
You don't need those programs to do it. Go to phone setting > Mode of Operation > change to EVDO only. This will automatically block all incoming/outgoing calls.
PS you might have to edit your registry if Mode of operation doesnt show.
I believe DCD's clean rom has it on his rom.
basian2001 said:
I believe DCD's clean rom has it on his rom.
Click to expand...
Click to collapse
Yes it does.
That does seem to work for my last option. But I cant receive any calls at all when in this mode, so I guess I would have to manually change this each time . Is there any way this entry can be automatically changed somehow with a script or a registry change? Also, this wouldn't work in areas without EVDO right? Since I'm disabling 1x, it would seem like it. So no software solution for this eh? Wierd how the glitch with the Q was perfect for me...
You are stuck with the manual fix tbh.
PortGo for Windows Mobile 6/6.5 V1.3
PortGo is the newest free softphone application from PortSIP, it's built base on PortSIP VoIP SDK, allowing users to enjoy multimedia communications in a dynamic way.
PortGo works seamlessly with your internet connection – you can chat away with free calls and never worry about cost, time or distance. It including great features to help you stay in touch with friends, family and co-workers, share your thoughts and views and find the information you need. You can use it on your PDA
PortGo is a VOIP softphone that running on Windows Mobile 6.0/6.5, allows you to speak with any other softphone , any stand-alone IP-phone, or using Internet Telephony Service Provider (ITSP) with any traditional wired or mobile phone. It supports SIP and is fully inter-operable with most major VOIP vendors and ITSPs.
Standard Features
Support platforms: Windows Mobile 6/6.5
Support Device Screen: QVGA(320*240),VGA(640*480),WVGA(800*480)
Support servers: Cisco CallManager, Open SER, SER, Asterisk, Portaone, Radvision, Nortel, Rainbow, Avaya and other SIP Platforms.
Switch between earpiece and load-speaker(Does no support some devices, likes Samsung I708)
Audio call: G.711 aLaw/uLaw, GSM
Call transfer: Blind transfer
Call hold, mute speaker, mute microphone.
Audio record: record audio as wave file.
DTMF support: Send DTMF tone(RFC2833 and SIP INFO method), detect DTMF tone(RFC2833 and SIP INFO method).
Silent Ringtone
Audio conference
Acoustic Echo Cancellation
Automatic gain control
Comfort Noise Generation
Voice Activity Detector
STUN support
Bluetooth headset support
Outbound proxy server support
Jitter buffer
Customization SKIN,Default support:CIF(240*320),HVGA(240*400),WVGA(480*800)
Multiple Language support.User can add new language support.
Freeware
Todo:
1.Audio conference.
2.IM Support: SIMPLE(Presence, Subscribe, Pager message).
3.Support video call.
4.Audio record: record audio as MP3 file.
5.Support TLS/SRTP.
6.Customization Ringtone
7.Multiple sip accounts
Attention!
Having PortSIP installed is not enough to talk except over your local network. You have to obtain an account with any ITSP like Vonage or SipIptel.org, or install your own VoIP server.
If you have any advice, please let us know, we are happy to listen to.
Change log:
AUG 22, 2010 Version 1.3.8.18
1: Added set ptime options.
2: Added Acoustic Echo Cancellation(AEC),Noise Suppressor(ANS) options.
3: Support 2 line, audio conference.
4: Added MessCall notify
5: Added auto connect to Internet.
6: Add HVGA(240*400) skin.
7: Optimized call to PSTN sound quality.
8: Fixed some BUG.
Jun 17,2010
1: Reduce the voice delay.
2: Customization SKIN,Default support:CIF(240*320),WVGA(480*800).
3: Multiple Language support.User can add new language support by self.
4: Added Display name Multiple Language support.
5: change soft name to PortGo.
6: Support receive incoming call on Power suspend state.
7: Remove audio codec G.729,G723.1(Because the G.729 and G.723.1 codec is not free)
8: Fixed dial prefix BUG.
9: Agent name change to :"PortGo for Mobile"
Jul 8, 2009
1:Optimized sound quality.
2:Update SIP protocol stack.
3:Add button to remove account.
4:The number on the contact list auto Remove ()-, and space.
5:Fixed call out has the early media,the ringing sound comes through speaker,Now change the ringing sound comes through earpiece.
Jun 24,2009
1.When callnum is null, click call button will open "Call History".
2.The number on the contact list auto Remove ()- and space.
3: Set default port to 5060.
4.Disable "Auto screen off " .
5.Fixed "The application exit,but ringing tone continues" BUG.
6.Order account by last of user access.
7.Multiple tone files for the DTMF key presses.
8.Added show call failure message.
Jun 15,2009
1.Add windows contact support.
2.Disable Suspend when call is active(quickly drain the batteries).
3.Auto screen off when call is active.
4.Dial prefix support.
5.Command line support.
6.Long press(more then 2sec) of "0" changing to "+", when call num is empty.
7.Check for update.
8.Agent name change to :"PortSIP CE for Mobile"
9.reconnect or auto reconnect
10.fix some bugs.
May 20,2009
1.Add support DisplayName.
2.Fix AuthName bug.
3.Smaller memory requirements
April 24,2009
PortSIP CE Beta1 release
Download:
PortGo for Windows Mobile (Freeware)
http://www.portsip.com/downloads/portgo/PortGo_m.cab
PortGo Pro for Windows Mobile(15 days trial )
http://www.portsip.com/downloads/portgo/PortGo_Pro_m.cab
Multiple Language FAQ:
http://forum.xda-developers.com/showpost.php?p=6866807&postcount=364
last updated: Jun 17,2010
Support Device List:
HTC Touch Diamond
HTC Touch Diamond2
HTC Touch HD
HTC Touch HD2
HTC Touch 3G
HTC TyTN II
HTC Touch Diamond 2(looks kinda fuzzy)
HTC sprint mogul/titan 6800
Samsung Omnia i900
If PortGo can support/nonsupport you device, please tell to me, Help create support list,thank you!
Report Type :
Device Name | OS version | Support | False Reasons
sample:
HTC Touch Diamond WM6.1 YES
O2 Atom Exec WM5 NO Earpiece false
Settings
Hi I'm trying to use this software...Could you please help me with the settings?
I've created an account with iptel.org but can i use this account to make calls for free?
how does it work??
which proxy server and port do i have to use on the settings?
With the iptel.org service only pure VoIP calls can be made; iptel.org does not sell minutes into PSTN.
Sleeping while working !
Dear MaxDan,
Thank you very much for the time that you spent to find this and sharing with us !
i have tested this on TyTN ii and it succeeded ! I think this softphone is nice than the AgePhone mobile2, it has more codecs including G729 in a freeware, which are not available in AgePhone mobile2 after ($35).
There are few small bugs, which could be taken care in next update:
*It forgets the toggle setting for Earpiece / Speaker (some times toggles by itself)
*It also have a sleeping habit, when the screen goes off or the phone goes into standby mode, you can't hear your call, but its working in background.
Rest i would like to say its great software till date...
Thanks & Best Regards
Kip
Dear kipciaan,
Thank you for the use of PortSIP CE.
Question 1:
*It forgets the toggle setting for Earpiece / Speaker (some times toggles by itself)
Did you mean when selected "Use Earpiece", the phone still play ring tone on speaker when the call is incoming? This is our design.
*It also have a sleeping habit, when the screen goes off or the phone goes into standby mode, you can't hear your call, but its working in background.
This is a trouble, Because i can't disable sleep(Power will shortage), and i don't know connect to internet use WIFI or 3G or EDGE, which device must be activating. We will choose a compromise solution to fix this BUG at last version.
Best Regards!
Advance Settings
Dear MaxDan,
thanks for your reply!
* it toggle by it self :
when i generate CALL selecting "USE EARPIECE" mostly the sound comes from the EARPIECE but sometimes from SPEAKER (at back) on TyTN ii.
i think may be the file used for audio routing delay to execute or something... ('m not a technical pro_ )
there must be solution for the backlight and to hold the softphone running without shut off.
in the Menu i see the "OPTIONS" are hidden, don't know why?
*Please change the "History" button to "Contacts/PhoneBook" making others life simple!
#the "CALL History" can be viewed by going into menu.
waiting for the latest updates soon.
Best Regards.
Finally, a SIP tool. Thank you so much! Tow further enhacements:
-if possible in the future to allow configuration of a dial prefix, some VOIP providers require e.g 001 +phone number, if selected from Addressbook 001 is missing, so a possiblity to dial automatically 001+ addressbook number (or any other prefix) is welcome
-also multiple SIP accounts if possible, to switch between providers,
-how can I replace beep when a number is dialed with a DTMF tone
Thanks for the nice weekend present, and congrats for this very usefull tool
dear kipciaan,
* it toggle by it self
I will test this problem later.
there must be solution for the backlight and to hold the softphone running without shut off.
This BUG will fix shall precede all other.
the Menu "OPTIONS"
This is a reserved Menu. To implemented some specifically function.
"Contacts/PhoneBook"
We have to consider use windows mobile system contacts or PortSIP CE program self contacts. when implemented contacts,will change "History" button to "PhoneBook"
Best Regards.
Dear yo3gjc,
if possible in the future to allow configuration of a dial prefix, some VOIP providers require e.g 001 +phone number, if selected from Addressbook 001 is missing, so a possiblity to dial automatically 001+ addressbook number (or any other prefix) is welcome
We can add dial prefix future, setting at "Options" menu.
-also multiple SIP accounts if possible, to switch between providers
You can login out to change SIP accounts. We don't support use multiple SIP account at the same time.
how can I replace beep when a number is dialed with a DTMF tone
You can replace audio file at sound directory, 8000HZ mono 16bit wav.
i wasnt successful to get my VoIPBuster account registering
How can i use this software with voipBuster?
hello,
works fine with french freephonie sip provider.
Is it the same than pangolin ?
Can it be skinable?
thanks :.)
Using a VoIPBuster Account
Please try these settings!
Account name : your VoipBuster username
Password : your VoipBuster password
Proxy server : sip.voipbuster.com
SIP port : 5060
Under Advance tab:-
Domain
Auth Name:your VoipBuster username or voipnumber
User Domain: (leave it Blank)
Stun and Firewall OutBond Proxy:
Stunserver (option) : stun.voipbuster.com port 3478
Outbound proxy server : leave empty
You are requested to use G.711 codec for best results
Best Regsrds
Thanks a lot MaxDan, IMHO this is the biggest step ahead since X-pro, not to many apps around. Once again thanks for this initiative
MaxDan said:
Dear yo3gjc,
if possible in the future to allow configuration of a dial prefix, some VOIP providers require e.g 001 +phone number, if selected from Addressbook 001 is missing, so a possiblity to dial automatically 001+ addressbook number (or any other prefix) is welcome
We can add dial prefix future, setting at "Options" menu.
-also multiple SIP accounts if possible, to switch between providers
You can login out to change SIP accounts. We don't support use multiple SIP account at the same time.
how can I replace beep when a number is dialed with a DTMF tone
You can replace audio file at sound directory, 8000HZ mono 16bit wav.
Click to expand...
Click to collapse
so what else am I supposed to install on my IMate-8502 other than this software?
I have a SIP account from poivy.com.
Thanks
Handfree
This software works grate with my sip account .
Just 3 requests I have for next version if they are possible :
1) Use windows contacts to dial from the windows phonebook with our sip account.
2) Is it possible for this program to have an option to transfer the voice to bluetooth headset when there is a one connected to the phone ?
3) I also request for multiple sip accounts at the same time. The reason is my sip provider have a different proxy for incoming call and another one for outgoing with 2 different port numbers. Right now I can make calls no problem but I can't receive any calls because of the above reason .
If u can add several or at least 2 proxy at the same time, this software will be my Sipphone for ever.
Tnx
Thunder
hi Tempest69,
Is it the same than pangolin ?
Yes,It's same than pangolin. But pangolin is run at windows 2000/xp/vista, Pangolin is freeware too.
Can it be skinable?
We only support Customization Softphone for company current.
Freeware isn't support skinable.
hi thunder6290.
1.Use windows contact
we will add it at next version(Beta2).
2.bluetooth headset
3.multiple sip accounts
I has add it to todo, but it will add to PortSIP CE latter. maybe Beta3 or Beta4.
I has update todo, you can find it at Page1.
Anyone tried this with gizmo5? If so what settings did you use?
finally a newish voip software for WM6 and it's free.
Will try it out tonight after I get home from work.
Hey guys,
I'm with Vodafone (Australia) and lately I've been working in my garage a fair bit where I don't have reception. During this time numerous people have called me, however I don't receive any notifications of missed calls at all. And when I go into phone log it doesn't show any call logs.
Is this a setting on the phone or should I contact Vodafone to get this sorted?
Cheers
Good question Jonno. I'm also with Voda & honestly couldn't remember if this feature was working properly or not as I haven't missed a call for ages (people know not to call me at unsociable hours when I have the phone switched off ).
Soooo...I plonked my mobile broadband sim into my Nokia backup phone, turned my SGS2 to flight mode (to mimic not having coverage), called it from the Nokia & let it ring half a doz times then hung up.
Switched the SGS2's radio back on & haven't received a missed call notification (it's been almost 5 minutes). I've searched high & low thru my call settings & can't find anything that would turn such a feature on/off so I'm betting it's a network related thing. I'll update this post if the missed call notification comes thru at any stage tonight.
Yeah I've never got any missed call notifications with the phone. I have people trying to get on to me regarding some recent job applications so it's not very useful if I miss their calls and don't know who to call back!
Might try calling Voda tomorrow to see if they know anything about it...
Jonno...The thick plottens
I was ferreting around in the dialer/call settings & had a look at the call forwarding settings. Basically, forward when busy/unanswered/unreachable is set to that Voda number people who try to call you get when you don't answer & it asks whether you want Voda's "call catcher" to txt the person you're try to call to let them know they missed your call (with the number to call back on).
When I try to disable this feature on any of busy/unanswered/unreachable it tells me the network doesn't allow the feature to be turned off. So it seems Voda thinks their way of people being able to notify you by txt when you miss their call is the best way (only way by the looks of it) for this situation to be handled.
So I'd say people obviously haven't been choosing the option to send you a notification txt (via Voda's call catcher) and have simply been hanging up when they've been unable to reach you.
I guess the only way to get around this is to tell people to use the send notification txt option or to simply send you a txt themselves to say they tried to call & couldn't get you.
Unless you want to have fun calling Voda's uber helpful support ?
I have nexus s with stock android 4.0. when i make a call, i always get a popup where i have to choose mobil or internet calling. se picture below. how can i remove this ??
set it to default .....
what and where can i set to default ?
IF you can select a default action it will be in settings (don't know exactly where) but if this bother you try deleting the internet calling service? This can simply be removed from the settings menu.
hope this helps a bit.
I'm not sure if that popup was asking you to choose a particular internet calling account or if it was asking if you want to dial over the phone network/with internet dialing. I'll try to explain both though...
The default way to call should be under the settings for the phone app, under the Internet Calling section (near the bottom). There you can control whether the phone asks you if you want to do internet dialing or not.
As for making it automatically choose a certain Internet Dialing account, see if checking Set As Primary Account under the Internet Calling/Account part of the Phone Settings does anything to improve things.
If it doesn't work to your liking, I strongly recommend abandoning the built in SIP support and using cSipSimple. With cSipSimple, you can set filters that trigger when a dialed number matches a certain pattern. For example, you could have Internet Dialing with Sip-Provider-1 kick in automatically if you dial a number with a long distance area code.
If you decide to go this route and need a hand, let me know.
- chris
YESSSS!! its gone. thanks for all your help and tips