number of rings before answering - MDA, XDA, 1010 General

Can any one help the phone only rings 3 times before going to answer machine is ther any way of increasing this ,i have tried setting the auto answer but this doesnt do anything

It's not that the phone only rings three times, it's that the ringer type, only rings 3 times while the network sends 8 or 9 rings.
Call your phone and count the rings on your phone, and the rings on the network (on the phone you are calling from).
If that makes sense.
BB

bbourke said:
It's not that the phone only rings three times, it's that the ringer type, only rings 3 times while the network sends 8 or 9 rings.
Call your phone and count the rings on your phone, and the rings on the network (on the phone you are calling from).
If that makes sense.
BB
Click to expand...
Click to collapse
Hi,
This is not necessarily true.
Try this, as it is a Network Operator Default;
Dial;
**61*YourVoiceMailNumber**N#@
Where YourVoiceMail Number is specific to your actual Number not "121" (your service provider will be able to give it to you). N = number of seconds until it is routed to voice mail. This can be up to 30.
See http://www.cellular.co.za/gsm_hash_code.htm for full details.
This worked on my UK Vodafone account.
Hope it helps!

Related

Problems receiveing calls

Several times when I have received a phone call, I try to answer it, and the ringing stops, and the caller is sent to voicemail.
I don't think I'm doing it wrong, slide down bar to answer call etc. A friend said it was ringing at his end for about 40 seconds, but i only heard it for about 5?! There have been times where I see my phone light up as a call is coming in, but it doesn't ring, and I can't answer the call. I'm expecting some important calls, and don't want to not answer them.
Could it be that the processor is being overwhelmed, and not allowing me to answer/phone not ring. Or is it a fault with the phone, or me?!
1) I have had similar problems.
2) If you do hear or see it ringing, swiping down on the lower 1/4 of the screen seems to work for me. That is, if I swipe down like I normally do to unlock the screen, it won't answer the call. If I swipe down only on the bottom portion of the screen it works ok.
similar problem here. I wonder if you swipe too big, does it pull the lock screen down, and bump the ignore/send to vmail button somehow. not sure why, but its happening to me and it sucks! missed the last 3 calls today bc of it. makes it hard to run a business thats for sure!
I use a phone service that diverts calls simultaneously to my landline and mobile and my landline often gets 2 or 3 rings in before the Hero's trackball starts to flash (although once yesterday they did both manage to ring at nearly the same time). Some of the delay is the mobile network finding the phone, but the phone does seem to take a long time to respond to the incoming call.
One option is to extend the length of time before calls are diverted to voicemail. At http://www.cellular.co.za/gsm_hash_code.htm is a list of GSM Network Codes, which includes, towards the bottom, one for extending the period before calls go to voicemail. It looks like the maximum is 30 seconds. I don't know if there is an equivalent for non-GSM networks.

[Q] No incoming calls

I've had the Galaxy S2 for about 2 months now without any problems.
As of last Friday, I can't receive incoming calls. People who try to call me hear one beep and then they get my voicemail.
Outgoing calls work just fine, as does SMS (incoming and outgoing).
I've put my T-Mobile SIM in another phone and then it is able to receive a call. Another SIM in my phone -> same problem: no incoming calls.
So I figured it must be the phone.
Customer support has started an investigation but that can take up to 1 week, so I thought let's ask XDA.
Can it be a simple setting that I've accidentally changed? Pretty often when I take my phone from my pocket, the screen is unlocked so that could be a cause.
If anyone has a clue or an identical situation, please let me know.
Zjoske said:
I've had the Galaxy S2 for about 2 months now without any problems.
As of last Friday, I can't receive incoming calls. People who try to call me hear one beep and then they get my voicemail.
Outgoing calls work just fine, as does SMS (incoming and outgoing).
I've put my T-Mobile SIM in another phone and then it is able to receive a call. Another SIM in my phone -> same problem: no incoming calls.
So I figured it must be the phone.
Customer support has started an investigation but that can take up to 1 week, so I thought let's ask XDA.
Can it be a simple setting that I've accidentally changed? Pretty often when I take my phone from my pocket, the screen is unlocked so that could be a cause.
If anyone has a clue or an identical situation, please let me know.
Click to expand...
Click to collapse
Does your phone ring when a call comes in and also does it go straight through to your voicemail?
daleski75 said:
Does your phone ring when a call comes in and also does it go straight through to your voicemail?
Click to expand...
Click to collapse
Straight to voicemail. But I've figured it out after 3 days
There's an option to automatically block all incoming calls in the settings. Must have accidentally been activated when the phone was in my pocket.
daleski75 said:
Does your phone ring when a call comes in and also does it go straight through to your voicemail?
Click to expand...
Click to collapse
In my case, the phone does not ring when I get a call at all. I have searched hi and low and I cant find a solution. I have rebooted, i have reflashed, I have changed my ringtone and nothing seems to work, please help!!
Hello my girlfriends SGS 2 has almost the same problem it cannot receive calls sometimes even though she can call everyone. The problem seems to fix by itself sometimes and it appears random.
I read that there was a problem with the samsung galaxy s when using 2G/EDGE connection with data activated and the problem was that the user could not receive calls randomly.
Can you confirm that you are using 2G/EDGE connection and Data activated? I am also trying to find the cause of this problem...
Hope my research helps good luck and waiting for your reply. (http://www.samsunggalaxysforum.com/...eive-incoming-calls-and-sms-while-using-edge/)
Later EDIT ---
She also has a vodafone provider but i have the same provider and never had this issue. Also no call filtering is done.
Make sure Call Forwarding is Disabled under Settings- Call- Call forwarding. And also try to delete the Voicemail number if you had set any.
Regards.
it's nothing Call Forwarding is Disabled related it is because of EDGE connection you can't have a sync or internet connection and while "dialing" data receive calls if you want to call anyone the network prioritizes and let's you dial whoever you want but it is not the same thing for incoming calls
^ Went over my head !
had the same problem in a bad 3g/data coverage area. solution was simply to turn data off and the calls started to come through.
turned data back on and now working ok.

[Q] Forward all calls when out of range instead of unanswered

After a bunch of clicking and rebooting I got auto call forwarding working when Bluetooth disconnects, but it's not what I expected. It's only forwarding calls when unanswered.
I want to walk away from the phone and leave it behind and have calls forwarded immediately, all calls. I thought that was the point of this feature. I don't want them to have to ring for 20 seconds.
Is there some way to make this happen? I noticed it changes the network settings for unanswered, busy, and unreachable to forward, but all call forwarding is never enabled by auto forward.
Lucent said:
After a bunch of clicking and rebooting I got auto call forwarding working when Bluetooth disconnects, but it's not what I expected. It's only forwarding calls when unanswered.
I want to walk away from the phone and leave it behind and have calls forwarded immediately, all calls. I thought that was the point of this feature. I don't want them to have to ring for 20 seconds.
Is there some way to make this happen? I noticed it changes the network settings for unanswered, busy, and unreachable to forward, but all call forwarding is never enabled by auto forward.
Click to expand...
Click to collapse
Wild guess you have AT&T?
Uniquebarbee said:
Wild guess you have AT&T?
Click to expand...
Click to collapse
Nope, T-Mobile. Why? Are there ways around this on non-AT&T carriers?
Lucent said:
Nope, T-Mobile. Why? Are there ways around this on non-AT&T carriers?
Click to expand...
Click to collapse
You could try this
AT&T and T-Mobile both use the same method, which lets you change the number of rings right from your phone. To do it:
Dial *#61# from your phone. Tap Send.
You should see a new screen that displays a bunch of information about what's getting forwarded. You should see a line under "Voice Call Forwarding" that says "Forwards to +11234567890" (where 11234567890 is an eleven digit phone number, likely different from your phone number). Write down this number and tap Dismiss.
Now, dial **61*+11234567890*11*XX# and hit Send, where 11234567890 is the number that you found in step two and XX is the number of seconds you want to wait until voicemail picks up. You can set it in increments of 5, where 30 seconds is the maximum.
After you hang up that call, you can have someone call your phone and see if it worked. On some phones, you can dial *#61# again and see how long it's delaying your calls, but our test phone (the iPhone) did not show this information.
Alternatively, you should be able to call AT&T or T-Mobile customer service and have them change it from their end, if you're uncomfortable doing it yourself.
Another thing that may work for you is to get up a google voice number and just give people that number. Then you they call you, it will ring at both numbers and you wont have to use the call forwarding option.
If only I was not in an area were I cant port my current cell number over to google voice, i would have dont that years ago.
rfs830 said:
Another thing that may work for you is to get up a google voice number and just give people that number. Then you they call you, it will ring at both numbers and you wont have to use the call forwarding option.
If only I was not in an area were I cant port my current cell number over to google voice, i would have dont that years ago.
Click to expand...
Click to collapse
THIS is true I have google voice I haven't ported my number over but I get calls and text fine from both numbers
So while messing around with the settings for google voice and the gear s, I have found that if you activate google voicemail on your phone then the call forwarding option will not work when remotely connected to your gear. Calls forwarded TO the gear s work as they should. As soon as I deactivate google voicemail on my phone, and my phone & gear are connected remotely I have no issues with getting my calls from my main cell phone line forwarded to the gear. This is kind of a bummer cause I was hoping that i'd be able to use google voicemail and thier transcription service because tmo charges $3 per month for it. Womp comp. I rarely get voicemails so it's not the end of the world.
Lucent said:
I want to walk away from the phone and leave it behind and have calls forwarded immediately, all calls. I thought that was the point of this feature. I don't want them to have to ring for 20 seconds.
Is there some way to make this happen? I noticed it changes the network settings for unanswered, busy, and unreachable to forward, but all call forwarding is never enabled by auto forward.
Click to expand...
Click to collapse
I have a call forwarding widget on my Note 3 that I use all the time. It instantly forwards all calls to whatever number you wish. Works great as when I'm in my office at work, I have it forwarded to my land-line, same at home, etc. I do this now on my Gear S too as like you, I don't want to have people wait through long numbers of phones ringing before it reaches me.
pdqgp said:
I have a call forwarding widget on my Note 3 that I use all the time. It instantly forwards all calls to whatever number you wish. Works great as when I'm in my office at work, I have it forwarded to my land-line, same at home, etc. I do this now on my Gear S too as like you, I don't want to have people wait through long numbers of phones ringing before it reaches me.
Click to expand...
Click to collapse
which app/widget you speak of? i want to give it a try.
I just hate when people tell you something helpfull and dont provide a link to the help seriosly you come here tou tell about widget but didnt even mentioned wich widget you using to call forward .....dahhhh
idelgado782 said:
So while messing around with the settings for google voice and the gear s, I have found that if you activate google voicemail on your phone then the call forwarding option will not work when remotely connected to your gear. Calls forwarded TO the gear s work as they should. As soon as I deactivate google voicemail on my phone, and my phone & gear are connected remotely I have no issues with getting my calls from my main cell phone line forwarded to the gear. This is kind of a bummer cause I was hoping that i'd be able to use google voicemail and thier transcription service because tmo charges $3 per month for it. Womp comp. I rarely get voicemails so it's not the end of the world.
Click to expand...
Click to collapse
They both use the same conditional forward entry for your line. You can only have one. Not both. If you want to forward to Gear S, your own voice mail will never be reached. And vice versa.
billybkny said:
I just hate when people tell you something helpfull and dont provide a link to the help seriosly you come here tou tell about widget but didnt even mentioned wich widget you using to call forward .....dahhhh
Click to expand...
Click to collapse
I suppose, but honestly, it's not that hard to just get on the play store and look them up. They all function pretty much the same. The one I use is RedirectCall. All one word. Very simple and works great.
I couldn't get it to forward right away either. It's pretty simple to actually just forward the call to the Gear S manually. On T-Mobile devices dial **21*your ten digit number# then when you want to cancel it dial ##21# that's it works like a charm. I use tasker now to do it automatically and have had no hiccups. Although it would be nice if it just worked correctly through gear manager.

Is there an app that would answer a phone call and say 'press 1 to be connected'?

I am getting a couple of calls a day from the same insurance scam operation, with the same robo call. Do not call list doesn't help, block doesn't help, they change numbers every day.
To combat this, I thought, what if there was an app that would:
• Allow all calls from address book to go through.
• Any number not in the address book doesn't ring, but gets auto-answered with a message "Press 1 to be connected" or similar.
That way, if it's a robo call, your phone never rings. If they press 1, they are human, your phone rings.
*bump*
App can't do that. You can do this only (if even possible) by calling your carrier. But I do recommend trying Truecaller. Truecaller is all-in-one app that allows you to block calls and messages from number. It can also detect if the number or SMS is fraudulent.
It's awesome, I use it as my main phone and SMS app.

Rings one call gone

This is the strangest thing and I've got a feeling it's going to take a reset to fix it. 9 times out if 10 when I get a phonecall (dif contacts & carriers) I'll get a blip and maybe nothing but the call is gone and I have to call the person back. It shows the call in the call log with the reject symbol but I've checked all auto reject settings and it shows off per contact and all settings. Ideas?

Categories

Resources