Please guide me to upgrade my Siemens SX-56 from Pocket PC 2002 Versions ROM Version 3.17.03
Is it ok to upgrade it to Windows Mobile 2003 Second Edition ROM Version 3.04.00
I have downloaded Windows Mobile 2003 Second Edition ROM Version 3.04.00 from the following site:
http://wiki.xda-developers.com/index.php?pagename=ROMVersions&version=5
Its an EXE file. Do I copy it in my SD card and run it from there or Directly from Computer.
If Windows Mobile 2003 Second Edition ROM Version 3.04.00 is not a good option please suggest which version will be the best.
Thanks
Aamer Sheikh
I would suggest you use the 4.01.12 ROM since the WM2003 SE has some "little problems". I think this is the most functional (English) ROM for teh XDA.
Just download the exe file. connect your device to your PC via ActiveSync and run the exe file on your PC. Then just follow the instructions...
HTH
Stefan
Well, i do suggest wm2003se...for me it is faster than wm2003, it has screen rotation, and it does not wipes out your SD-card.
Thank You LumpiStefan & KTamas
I have upgraded my Rom to wm2003se (3.04.00_ENG) so far it seems to be working fine
and yes KTamas you are right it seems to be more faster than the previous version.
I have a quick question.
Am trying to load all my previous softwares but am getting the message that the software may not display properly. Do i need to download all the softwares again for WM2003.
Another Q i dont seem to find MMS Composer on this WM2003SE. Do I need to install that seperately?
Thanks to Both of you for Helping me out
Regards
Aamer Sheikh
aamer said:
I have a quick question.
Am trying to load all my previous softwares but am getting the message that the software may not display properly. Do i need to download all the softwares again for WM2003.
Click to expand...
Click to collapse
You don't have to worry about this message. It says that the software MAYBE not works well in landscape mode.
aamer said:
Another Q i dont seem to find MMS Composer on this WM2003SE. Do I need to install that seperately?
Click to expand...
Click to collapse
Yes, you have to install it seperatelly.
After Update to WM2003SE the only problem I have is that Infra Transfer is not working.
Neither I can send or Receive any file via Infra Beam.
Tried once to Downgrade it to the orignaly installed version but still no use. it still dont work.
is there any driver or software which can resolve this issue.
please do note it does detect any phone i try to send file via infra beam. but it says FAILED.
Await your Reply
Aamer
Infrared worked for me fine. Tried it just in the moment between to XDA´s. Ohne have WM2003SE and the other one PPC2002.
Transfer worked in bothe directions without any problem....
Stefan
Mine is not working at all
is there any software u can suggest that i should install
which cud solve the problemo
you did renember to turn on recieve all beam files in connection right ?
LumpiStefan said:
Infrared worked for me fine. Tried it just in the moment between to XDA´s. Ohne have WM2003SE and the other one PPC2002.
Transfer worked in bothe directions without any problem....
Stefan
Click to expand...
Click to collapse
I had no probs either.
yes i did turn it on.
is it possible that the bootloader is messed-up?
aamer
aamer said:
yes i did turn it on.
is it possible that the bootloader is messed-up?
Click to expand...
Click to collapse
Nomrally infrared has nothing to do with the bootlaoder, so i don't believe it. And you said, that the infrared is working and just the transfer failed....
But i've got no solution how to fix that problem...
Stefan
Related
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
mmbmvc said:
hi alls
who can tel me how the way that i can resetup WM2003SE from WM2005
because WM2005 not Hard reset and any programsnot work on it
thank you
Click to expand...
Click to collapse
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
In your screen you can see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No -------- should remain NO
3 Storage = No ------------- change this to YES
then press the big round button(nav pad between the call and call end buttons)
the device reboots.
you go to bootloader by press Power + round big button + soft reset, then downgrade
no need to hard reset
ActiveSync doesn't work
I can't downgrade to WM SE because ActiveSync does not work
I could downgrade using bootloader mode nevertheless ActiveSync did not connect my device.
I have uninstalled AS 4.0 and installed AS 3.8, but it doesn't work! I can connect my XDA II. Could you tell me what is the reason?
Yazzon,
I have downgraded without any issues. A matter of fact, I kept Active Sync 4.0 instead of going back to 3.8
What is the issue with Active Sync, have you tried uninstall and reinstall? Which version of Active Sync are you using?
I've reinstalled AS versions: 3.7, 3.8, 3.8 - Polish. After reinstallation, when I cradle my device, AS connect XDA II but I can't explore device and I can't synchronize. I reinstalled AS many times but no results.
In order to return from wm2005 to wm2003se I used himaupgradeut_197.exe in bootloader mode and the original file nk.nbf of wm2003. To me he worked to me.
I used activesync 4.0.0.
Also it is possible to install wm2005 again using himaupgradeut_197.exe.
Please Help me! Can't downgrade!!!!
I tried: himaupgradeut_197.exe in Serial Mode
I tried: hard reset. Didn't really do anything
What did I do wrong. Always get a connection error... 101
Please Help!
In order to upgrade to 2005, you have used himaupgradeut_197.exe?
ive downgraded by puting it 2 boot loader mode and then put it in the cradle (with AC 4.0) and then run the HimaUpgradeUt.exe from my rom.
and it was 2003se again
Downgraded from WM2005 to 2.20
:arrow: I downgraded from WM2005 to 2.20 without any problems .
Extended ROM sill working .
And I am keeping ActivSync 4 becouse giving me no problems .
By the way ... My ActiveSync 4 Build 4328 .
Is it the latest one ?
I think the key to a sucessful downgrade from WM2005 is to keep AS 4.0 on the machine while you have WM2005 on your PPC. After the downgrade you can go back to AS 3.8. In my case I decided to keep it .
However I ran into one issue with AS 4.0 after the downgrade. After installing MS Voice Command 1.01, I tried to upgrade to MS Voice Command 1.5 and it keeps complaining about not being able to find previous versions. I went to another machine with AS 3.8 and tried the same thing with the same files and I had no issues.
Nonetheless I am keeping AS 4.0 until I run into something I don't have a workaround.
I got AS 4.0. I did not upgrade with..._197.exe. I did it with some other.
Maybee someone can give me a link to a clean 2003se without any nicknack? Maybee that works. Used the aussie version. To downgrade.
Thanks in advance.
Upgrade WM2005 with bootloader v. 1.06
Hi all!
Has there anyone upgrading to wm2005 with bootloader version 1.06? Thought of trying it too, just that afraid can't downgrade to wm 2003 SE. Coz I'm aware of dcs threads, with bootloader version 1.06 it isn't likely to downgrade from wm 2003 se to a normal ppc 2003(of which is of the original rom). Hope to hear inputs. thanks.
ferioz
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
From which Rom version are you trying to downgrade? What is your bootloader version?
Downgrade to WM 2003 SE
To those having problems in downgrading, this might help...
I was just trying out of the thrill for the new wm 2005. Before that my previous Rom version was WM2003 SE. Flashing to wm 2005 was rather smooth sailing; there isn't any hindrances like country id error code and so forth.
Thanks for those threads from the geekz here like softworkz, xda2jojo, dewild1(who's been reincarnate into a new creature at xda-developers ), and other geekz who's involved in this so called immature(by MS) project. I was literally read their threads and get the ideas from it.
Was initially excited on the new OS, but when I start to touch on it, oh well, it's too good to be true... Nah not to critize much of this... The bottom line, it's a total new looks and new sounds, especially on the click at the start menu, I kinda like that new sound... Good interface but it has lots of buts...; camera button wasn't bound, so when click on camera button is just like a dummy button...
While I'm typing this, my downgrade process is still working at the background, so I pretty much believe that it gona work as it still does the process, so confidently would want to contribute what I did to downgrade.
1) Sit back relax, don't panick = it doesn't/will never bring to solution. Take a deep breath and always feel with hope
2) All you need is to be able to get the device into bootloader mode, my bootloader version is 1.06, so wouldn't be sure if it works on other version, hopefully yes.
3) During the bootloader mode, dock your xda 2 onto the cradle, and get ready of your previous Rom files, double click on HimaUpgradeUt.exe and just wait for it to start doing the magicX...
I hope I didn't misss any step here, even if I did, please excuse me, coz i'm just a newbie hehe....
Ok hopes of getting back your xda 2 alive is yet to process, just fireaway
ferioz
maniak said:
When i want to downgrade i always get a connection error and then my active sync is not working anymore until restart of my pc. Any suggestions? Using as 4
Click to expand...
Click to collapse
go to bootloader b/4 you put your device into cradle
Weeeeeell -
i have no clue why! but I managed to get it running.
I just inserted into the cradle and it worked!
Sometimes you just have to go to bed and try it the next morning
Only thing I did was to pull out the Battery over night... Maybee that did something.
Just for Info:
Bootloader V1.02
ROM : Can't See is just upgrading @ moment.
Btw: The good thing about Wm2005 it is working even if you have no energy anymore... No data will be lost. The Bad thing you lose 128 megs of Ram...
i suggest 2 read this:
http://forum.xda-developers.com/viewtopic.php?t=18122
it discribes how to flash ur phone
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
Hi all.
I tried to update to WM6 on my Dopod 818 Pro with ProphetTouchIXbeta2. It displayed and error and after hard resetting I can only get the splash screen. So I roamed the forum the whole day downloaded a couple of other WM6 packages (I could not get the WM5 files from the WM6 upgrade guide, link is dead). So I downloaded the ROM updates from the HTC websites for the 818 Pro. I can start the 818 Pro into Bootloader, but whatever ROM file I use will tell me Update Error 260 Cannot connect!!
The Bootloader tells me the following: IPL 2.15.0001 / SPL 2.15.0001 and USB connected. Active Sync will not connect.
Sorry, I am a newbie and should have waited for the official upgrade. But I had to try
Thank you in advance for any help!
Cheers,
Markus
Hi,
i had the same trouble some time ago. The false was, that I connect my NEO on an USB Hub, take a direct connection between your PC and your XDA. Also, if it's possible, try another PC. HTH
Put your Prophet in bootloadermode: press Camm button and soft reset at the same time.
In ActiveSync on your PC: DISable connectionsetting "Allow USB connection"
Conect your Prophet to a USBport directly with a cable.
Run a NVID-RUU, perhaps the official VID-RUU doesn't recognize your device anymore.
This should do it.
i can confirm this process
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
starkus said:
Thanks guys, but the main issue is:
1. I can get into Bootloader
2. BUT ActiveSync does not make a connection with my DEvice in Bootloader and the ROMs I tried cannot connect to my device then.
I tried it on 2 machines (Vista and XP)
Cheers,
Markus
Click to expand...
Click to collapse
Activesync is not supose to conect to phone in bootloder
just run the wm5
Thanks,
but if I run the WM5 by HTC its only goes to the Verify information screen and after that. it says Error [260]: Connection. The Update utility cannot connect to your PDA Phone.
And in the beginning of the process it displays a couple of steps, like check that your battery is at least 50% charged and other ssteps, of which one is, that I have to make sure that ActiveSyc is connected.
Cheers,
Markus
Solved
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
starkus said:
Ok, the issue was that only this file from HTC would do the update: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
Alle the others I downloaded would not work, also not the files I got from here. One was by the way full of Viruses !
Thanks for your help guys! Will try to get to WM6 again now
Click to expand...
Click to collapse
which one was "full of viruses" and how you checked it ?
Sorry should have mentioned it before:
It was Prophet"s_2.20.7.34_2.20.7114_02.69.21
Virus or unwanted program 'W32/Sality.L [W32/Sality.L]'
All .exes were infected in that package.
Cheers,
Markus
dial panel still have some problem
cann't install the third panel,for explam,htc dial
ha,all people can report this rom bug in this Thread
thanx
good job
mun_rus
3rd party Touch Dialer acts the same as it did in WM5,but I installed most of the WM6 HTC apps and they work fine. No PocketMSN,though. Send/receive through activesync is slow and problematic.
3rd dialer also has problem in mine. and the internet sharing also do not work,
it seems to have conflict with the activesync, the two can not work at the same time
Windows Live Messenger Won't Connect
after upgraded to WM6 Rom, my Windows Live 10.6.33.0600 (Fixed) (duttythroy) version just can't get connected....gprs,edge,wifi,activesync.....oh my GOD!!!
Any idea?
Mobem CE-Star Problem
another problem in Asia here, i manage to install mobem CE-Star (Chinese IME) on it, but after restart, the touch screen not responding, hardware button not working, but device not hang, still receive incoming call, but no way to answer it...
Could not install certificate
I am unable to install root certificate and leaf certificate on my Gene 100. Please tellme how to unlock WM6 or way to install certificate. Diplays error "The certificate was not seccessfully added. Please restart the device and try again". After restart it still does not add.
hiii actually i am very new to this flashing and stuff ... and i cant understand ... how to go on with the first step that rom update utility thing!!!
i run it and then at 2% i get the error 270
btw i dont have this 1.10 Olipro ... 4m where can i get it ..... though i did download the zip file which contains this ROM update utility and other stuff!!!
can u please guide me step by step thanks a lot!!!
thank u
and could u also tell me where can i get jumpspl
i did download --> "RUU_Gene_HSPL.zip "
please help
and can u also tell me wether root refers to my documents???
thx in advance
riddhwaj619 said:
hiii actually i am very new to this flashing and stuff ... and i cant understand ... how to go on with the first step that rom update utility thing!!!
i run it and then at 2% i get the error 270
btw i dont have this 1.10 Olipro ... 4m where can i get it ..... though i did download the zip file which contains this ROM update utility and other stuff!!!
can u please guide me step by step thanks a lot!!!
thank u
and could u also tell me where can i get jumpspl
i did download --> "RUU_Gene_HSPL.zip "
please help
and can u also tell me wether root refers to my documents???
thx in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=363226
See here all the steps are expained
Strangely I'm unable to install some programs [like Kaspersky, Pocket Mechanic, etc] that were earlier working with WM5 !
shahkh said:
I am unable to install root certificate and leaf certificate on my Gene 100. Please tellme how to unlock WM6 or way to install certificate. Diplays error "The certificate was not seccessfully added. Please restart the device and try again". After restart it still does not add.
Click to expand...
Click to collapse
Device has no root certificates installed & I cannot add any.
As such I cannot sync with my Company Exchange server which requires SSL.
transcriber
transcriber is missing
and often (most of the times) ... when i open anything where u have to type something (eg. sms) then the keyboard soes open automatically.
otherwise its justt perfect!!!
(any idea how do i get my smses in a thread>>>>
thx
Audio booster
The audio booster doesnt seem to make any difference to sound. let me know if that is a problem only in my set..
pankaj4u said:
The audio booster doesnt seem to make any difference to sound. let me know if that is a problem only in my set..
Click to expand...
Click to collapse
I used the booster with TCMP to play flv files. Worked fine.
Unable to use USB sync
Hi. I'm not able to use the USB sync to computer after updating the WM 6.0 ROM posted by mun_rus. Any help is appriciated !!!
Issue resolved
cooldnkid said:
Hi. I'm not able to use the USB sync to computer after updating the WM 6.0 ROM posted by mun_rus. Any help is appriciated !!!
Click to expand...
Click to collapse
Dont bother answering. Had to change the settings in activesync on my mobile device...
GPRS
Guys
Can anyone tell me if the GPRS is working on this ROM?
I want to know before i flash! Thanks
GPRS/EDGE Working in MUN_RUS WM6 Rom
^^rac said:
Guys
Can anyone tell me if the GPRS is working on this ROM?
I want to know before i flash! Thanks
Click to expand...
Click to collapse
Yes its work. I am using it now.
Can't record phone call with notes or audio recorder
I've upgraded to wm6 and i've tried to record the phone call but the only voice i hear is mine. In the recording i can hear the other persons voice, but it is so low that i think it's the microphone picking up the sound from the earpiece.
I never tried it to record with wm5, so i don't know if this is specific to wm6 or not.
can anyone confirm?
rexypow said:
after upgraded to WM6 Rom, my Windows Live 10.6.33.0600 (Fixed) (duttythroy) version just can't get connected....gprs,edge,wifi,activesync.....oh my GOD!!!
Any idea?
Click to expand...
Click to collapse
Same problem here... any help?
best keyboard ever
For all the key board problems... here is the best key board which you can get in the windows environment..! works amazing with gene!
here is the link to down load
http://www.freewarepocketpc.net/s.php?querywords=touchpal
there are two versions, beginers try version 1.0 . It might find a little wierd at the begining but bileve me its amazing.! i am using it since 4 months..
Dont forget to watch the video in the link , it shows how to use it.
Enjoyyyyyyyyyyyyyyyyyy
I have tried and downloaded WM6.0 from the official dopod website and I found it to be slower and more complicated to use than the original WM5.0 which came with the system.
Would any of the ROM WM6.0 here be any faster and stable? My prioirty concern is Speed and Stability. Any advice which ROM I should try?
Thank you for any advice.
jlingo said:
I have tried and downloaded WM6.0 from the official dopod website and I found it to be slower and more complicated to use than the original WM5.0 which came with the system.
Would any of the ROM WM6.0 here be any faster and stable? My prioirty concern is Speed and Stability. Any advice which ROM I should try?
Thank you for any advice.
Click to expand...
Click to collapse
Get inline for PK 4.0. You can join the other addicts including myself that are eagerly awaiting the release of this ROM. Untill then I think you will find PK 3.0 to be the best thing since sliced bread for your wonderful PDA.
Uhm where I could download this PK 3.0?
http://athenaproject.logontek.com/AP...Dual 3.0.rar
Is it this one?
I'm having a trouble updating. It kept on going into The Image File is Corrupted ERROR after 1%.
ERROR 270 Update Error
I'm using Windows Vista, WMDC 6.1
jlingo said:
Uhm where I could download this PK 3.0?
http://athenaproject.logontek.com/AP...Dual 3.0.rar
Is it this one?
I'm having a trouble updating. It kept on going into The Image File is Corrupted ERROR after 1%.
ERROR 270 Update Error
I'm using Windows Vista, WMDC 6.1
Click to expand...
Click to collapse
Hi
You should be load the original rom first then unlock your device with Olipro's unlocker then load PK 3 rom. Without unlocking the CID you can't load just any other roms. Find the rom it came with it or the updated rom from HTC.
Olipros unlocker is available here http://forum.xda-developers.com/showthread.php?t=315831
Also read the unlocker thread before you update.
Thanks Great stuff.
I thought the unlocking was only for those who have Athena with Locked SIM card
Anyhow, I have flashed with PK 3.0 successfully.
Ok I am experiencing difficulty pairing syncing by Bluetooth. I already went to the registry to delete
hlkm/software/microsoft/bluetooth/activesync and still the problem not resolved.
Any solution?
Port not Available: Cannot communicate with PC because Port not available. Another program may be using the port.
jlingo said:
Ok I am experiencing difficulty pairing syncing by Bluetooth. I already went to the registry to delete
hlkm/software/microsoft/bluetooth/activesync and still the problem not resolved.
Any solution?
Port not Available: Cannot communicate with PC because Port not available. Another program may be using the port.
Click to expand...
Click to collapse
Hi again
See here how to activesync via bluetooth .(But remember not to use bluetooth for flashing the roms)
http://www.htcwiki.com/page/activesync+via+bluetooth?t=anon
Also remember to disconnect after your needs, otherwise your battery will be drined quickly.
Good luck
hi I have tried but the problem still persists. I still kept on getting the same error.
Now it works, I just hard-reset. the most painful way.
------------