Does the WM 2005 bluetooth work properly with handsfree profile or is it like 2003 and only work with head set profile :?:
Thanks
Jon
Works perfectly with my MR Handsfree headset. Until now I could not get it working in handsfree mode. With WM2005 it is working.
Own an AUDI with the factory installed Bluetooth handsfree kit and I have never been able to pair the XDAii with it so that it works properly - incredibly unstable and never could get to work completely... been lurking this forum and others and tried lots of solutions... upgraded the OS to WM5 today and first time paired and works perfectly - even displays caller ID on the Audi instrumentation!!! Most pleased - now if only I can get the o2 GPRS connection to work
Did notice the following problems with the Bluetooth
- Com ports not recognised - seemed to have something to do with the pairing... simple reset after pairing with Audi would then allow com port assigned to BT GPS (not fully tested yet)
- Multiple pairing - device seems to want to pair more than once not sure about this one but who cares it works now
916senna said:
Does the WM 2005 bluetooth work properly with handsfree profile or is it like 2003 and only work with head set profile :?:
Click to expand...
Click to collapse
I have Ericsson's HBH-65 and WM2005 uses it as Headset only. It doesn't even call-back when I press headset button :-(((((((
Motorola HS-850...
I have a Motorola HS-850 and it works perfectly with WM2005 in Handsfree mode.
Now if I can just get it to voicedial via bluetooth...
Jabra BT250 here and Handsfree works great!!!
WM2005 is the only OS that I have had where my Jabra does what i want it to do.
Craig.
The crux is can you activate your phone through your BT headset to call any number?
No good in a BMW
I loaded 2005 and tried to pair it with my BMW, although the pairing went well and the hands free profile was selected, its no better than Sins 2003 rom.
The microphone in the car doesnt work, the speakers do. The microphone on the phone is the active one. It wont connect a call unless you try twice and you have to answer call twice before they connect.
Bugger
Jon
In the devices list, tap and hold the car kit, and select handsfree, see if this helps.
Voice dialling
The thing I find most surprising with WM2005 (and the previous versions for PPC) is the lack of hands free/car kit voice dialling. That is one thing the P910 has over WM2005 phones that emphasises that full convergence has not happened in the mind of developers... the PPC is a PDA with phone connectivity, whereas the Symbian system has taken the approach that its a phone first and foremost. With the simple addition of hands free voice dialling, WM2005 could be the first really convergent OS.
(I'm kinda hoping someone will say they have a perfect voice-dialling system in place for the XDAII with WM2005, in which case I'll gladly eat my words)
I am still very grateful for ALL those here who have helped deliver three OS upgrades to my XDA in the space of 18 months!!!
Some people are using Microsoft Voice command with Magneto and they reported it to work well.
Cheers
Pat
List of working WM2005 programs:
http://forum.xda-developers.com/viewtopic.php?t=20727
scooter said:
Own an AUDI with the factory installed Bluetooth handsfree kit and I have never been able to pair the XDAii with it so that it works properly - incredibly unstable and never could get to work completely... been lurking this forum and others and tried lots of solutions... upgraded the OS to WM5 today and first time paired and works perfectly - even displays caller ID on the Audi instrumentation!!! Most pleased - now if only I can get the o2 GPRS connection to work
Did notice the following problems with the Bluetooth
- Com ports not recognised - seemed to have something to do with the pairing... simple reset after pairing with Audi would then allow com port assigned to BT GPS (not fully tested yet)
- Multiple pairing - device seems to want to pair more than once not sure about this one but who cares it works now
Click to expand...
Click to collapse
ditto with Merc 2003 E class.
same old problem with handsfree
i also have the Motorolla HS850 and though it did work for a while it seems to be back to mic and speaker working on the device and only speaker on the headset!
so though you can hear the call on the headset the mic dosn't work but the mic on the device is active as is the speaker
has anyone else had this with 2005?
have hard reset and re loaded 2005 but without success
hmm its working again.....
this is wierd!
headset battery was low yesterday so it may be to do with that. will keep checking and see if i can spot a pattern
Related
Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
paperuccio said:
Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
Click to expand...
Click to collapse
Why not email the author, he is most helpful.
Had the same issue with the Parrot. My Plantronics headset works a treat, but not the Parrot.
I mailed the author who confirmed there are some problems and a new release will be needed.
As the author is doing this work unpaid and the functionality is so good, I can wait.
@ mrg2003
I send an e-mail some days ago but still had no response.
Anyway, I agree with IanF and I'll wait for the new release.
I wish I read this bulletin board more often.
Yes, I have exactly the same problem with the CK3000 (v3.13) and PBT. HBH-35 works a treat but CK3000 does not bond (XDA thinks it does but there is no handshaking and CK3000 repeats request to bond).
Back to basics again ...
Incidentally, does anyone know if Tobias plans to engineer a way to trigger Voice Command and take input from the car microphone for voice recognition? Would be the dogs and well worth a major donation ....
Cheers
I've had some problems with pocket bluetooth. I have emailed tobias as follows and am awaiting a reply. Was wondering if anyone has faced similar problems:
Tobias,
Thanks for all the hard work in getting these tools working. I have just bought an XDAII with the latest 1.60.00 ROM using the 1.10.00 radio version.
At the same time, I have a WIDCOMM bluetooth dongle on my PC which supports numerous profiles including the headset profile, which allows me to use the PC's speakers and mic as a 'headset' with the XDAII.
I set up the XDAII with the PC, using the built-in bluetooth bonding and pairing application and managed to get it all working fine with the PC using the speakers and the mic as the headset, with the phone automatically transferring the call to the PC when the 'Bluetooth Headset mode is enabled' shows on the today screen. Furthermore, activesync also seems to work fine too.
After installing Pocket Bluetooth Tools, the headset stops working. Before installing it, I unpaired the device by deleting it from the list of paired devices. After installation and going through the process of pairing the device again, it correctly gives me the option to choose the Serial Port, ActiveSync, Modem, and Headset profile. I select all of these and click on OK. Once this happens, my PC gives me a message saying that the XDAII has connected with the headset. However, this doesn’t happen once but goes into a continuous loop giving me notifications every 2-3 seconds that this is the case. Furthermore, when making a call to see if the voice has been transferred to the PC< this stops working and the XDAII's speaker and mic continue to be used. The only way to stop the constant loop of connections is to switch off the bluetooth radio on the XDAII. Furthermore, when deleting the pairing from the XDAII this constant loop continues.
Have you faced this issue previously, as I think it may be a bug. The only reason I installed pocket Bluetooth is that my current b.tooth headset is a Nokia HDW-30 that supports the handsfree profile and your documentation states that Pocket Bluetooth tools supports this profile.
Let me know if there is a fix for this.
pap[/quote]
Why not email the author, he is most helpful.[/quote]
maybe just because he doesn't answer
i wrote a very long report some days after the long awaited new version came out in april, but haven't got any reply. (maybe my email got lost - who knows ...)
i have exactly the same problems. i also have a parrot ck3000 (tried with firmware 3.11 and 3.13) and an mda2 with rom 1.6.00GER and extROM 1.60.07. the two devices pair, and sometime i can even select the "headphone profile" afterwards. i even managed to make it work ONCE, after several hours, of installing, reinstalling, pairing, reparing, ect, ect ...
what did work once was making calls. but after the first call came in, i could answer it, the caller could hear me, but i couldn't hear anything. this happened twice and then i just turned off bt and used the mobile as always.
as i'm using my mda in my car for work and not for fun this is no solution for me . i went back to the original bt stack that works quite well. i can make and take calls w/o any problems.
one thing i'd like to see changed (as soon as parrot and mda work together) is, that ALL calls are made via the handsfree, as, as long i'm in the car it HAVE TO use the handsfree by law (and it's much more comfortable anyway). it's not practicle to dial with the mobile, and then by pressing the green button on the parrot to move the call to the handsfree. but that's the only way you can do it when using speeddial.
another thing i desperately miss is a way to change the volume of the handsfree. i could do this using the volume slider of my nokia 6310, but volume stays all the same when using the mda. and it's just too low when doing higher speeds on the autobahn
of course voice dialing would be a great feature to have ... but it's not that necessary.
please don't get me wrong .. i'm don't want to be ungrateful as i'm not paying for this software - i just want to help ppl by saying that they are not alone with their problem and they should give up wasting their time and better wait for a new release....
and of course i'm very willing to PAY for that software as well as soon as it is any improvement over the original bt stack (for me of course. for most of you it already is)
maybe TOWA could say some words here. that would be really appreciated.
thanks anyway a lot to all ppl that spend their free time developing software and providing it to the comunity!!! thumbs up !
regards ize|man
Bluetooth tools and ROM 1.72
Does ROM version 1.72 require TOWA's bluetooth tools? In this ROM, there are options for COM port selection etc under Bluetooth settings and the clubimate site mentions bluetooth improvements. Anyone with this info?
other com settings then
Inbound COM port com4
outbound COM port com5
??
if so what are they?
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
faisal said:
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
Click to expand...
Click to collapse
These are the ports for BT beaming, as I understand! (not for BT GPS).
For BT GPS you do not specifically need BTHTools anymore (since 1.66) because WM can install a BT GPS com at first bonding.
Something is different however (vs BTHTools) since with 1 application (Alturion) I can not get the BT GPS working anymore, which can also not be solved by still installing BTHTools!! (while I have no problems with my other application TT. Figure that out?!)
Ronald
I now have the same problem, the parrot ck3000 was working until I insatlle dthe bluetooth tools, and now it doesn't.
Its a shame I did not see this thread before
Will the 1.72 rom work with both parrot and my emtac bluetooth gps?
Cheers
Justinp
justinp
have you tried uninstalling Bluetoothtools?
no not yet, I might give that a go, but then my gps wont work :?
justinp said:
no not yet, I might give that a go, but then my gps wont work :?
Click to expand...
Click to collapse
I think it will still work!
With my working application (TT3) I see the GPS on COM5 (installed by WM) + on COM7 (installed by BTHTools) + on the BT/SIRF interface!
If I uninstall BTHTools I only loose the selection for COM7. The other two selections still work!
Of course you must have acknowledged the WM com installation with first bonding (in any case for the serial operation)! My BT/SIRF connection always works in TT3 regardless of WM/BTHTools installation of serial ports.
Ronald
I'm also having that strange problem with the parrot CK3000. I did install the previous version of BT but I don't see any difference with or without BT. But when I de-install and want to go back to the original state, the same problem persist. Is there any way to download anyware the original Bluetooth stack without re-install everything (and loosing all my settings and software)?
Thanks for helping out.
Frank.
The Orange SPV M1000, same as a XDAii, does not allow 2 headset profile bluetooth devices to be connected
The phone works fine with my Motorla 810 bluetooth headset.
It will also work fine with the Parrot 3300 to take and make calls, run TomTom3 sat nav and Livewire Speedcare.
The problem is the software on Orange will not allow 2 devices to be paired and stored on the phone which have bluetooth headset profile recognised. When the second device is paired it stops recognisning the headset capabilities of the first device.
Orange do not have a care kit profile for the phone.
This brings significant problems in moving from car to foot as one has to repair the alternative device. All settings and voice commands are then lost for the previous device.
Can anyone direct me to somewhere I can have the O2 software installed or an alternative solution for allowing 2 Bluetooth headset profile devices being paired at one time. Only one device will be connected at a time.
Hi Guys,
I have encountered the following problem.
When I first add my Supertooth II (car kit) to the ATOM (normal Hands Free handshake), everything goes well and I can get and make phonecalls.
However, after stopping the bluetooth on the ATOM and restart it after a while there is no communication between the devices any more and I have to add the Supertooth again to work.
I did not have the problem with the previous cooked WM5 ROMs.
Any Ideas?
Thanks,
Yaniv
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
So A2dp does not work on assembling of Wm6 for Exec Aku0.7a.0, authors so can not correct this bag already during 2-5 months, explaining that for them a garniture absents with A2DP,AVRCP, very it is sorry...
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
hooliganboy214 said:
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
Click to expand...
Click to collapse
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
MSI Player is unholy bull**** crap. We need native BT stereo in any player/
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Does not work!!!
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Garmin said:
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Click to expand...
Click to collapse
/HKLM/Drivers/BuiltIn/BtA2dpSnd
remove any Priority256 value
HKLM/Drivers/BuiltIn/WaveDev,
Priority256=149
/HKLM/Software/Microsoft/Bluetooth/AudioGateway
Capability=37
/HKLM/Software/Microsoft/Bluetooth/A2DP/Settings
UseJointStereo=0
BitPool=58
MaxSupportedBitPool=80
Remove all other values from this key including SampleRate
Does not work!!!
Coarls said:
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
Click to expand...
Click to collapse
you did not check the option for bluetooth settings -> make this device visible to other devices.
I have been using bluetooth to activesync with pc and interchange with other pda phone, but the atom can easily be found
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
Click to expand...
Click to collapse
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
NEW bluetooth audio gateway
Ultimate Chicken said:
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
Click to expand...
Click to collapse
thanks for clearing that out Ulti. I was wondering if you could try one more time with wm6 ms bluetooth stack? In the headset profile, I have tried to integrate a new set of bluetooth audio gateway. Unfortunately, this requires flashing a new ROM as the modules need to stay modules to work.
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
yanivw said:
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
Click to expand...
Click to collapse
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
jiggs said:
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
Click to expand...
Click to collapse
I did not.
How do I get and install it ?
Yaniv
yanivw said:
I did not.
How do I get and install it ?
Yaniv
Click to expand...
Click to collapse
Post#13 above
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Click to expand...
Click to collapse
Thanks, Jiggs, but the A2DP's still NG to my headset with this test ROM. Replacing the keyboard with the black one I liked back during O2 Mini BigStorage is a nice touch, tho.
Anyone else with a BT Stereo Headset, especially a 2.0 standard one, go ahead and help test. You may have better luck than me (the SR200 is just BT1.2 standard, and I'm now pushing SonicGear for a firmware update).
Sorry, I have Pulsar 590E and its 1.2 Bluetooth.
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Yeah , I just try it , and it works verywell . But my Bluetooth Handset isn't MSI 's device , so i only run it in 31s . Do u have other method ???????
I have searched across all the forums and have noted that the Hermes does not pair with a Cars built in blue-tooth radio allowing sound through the built-in speakers.
Does anyone have an update to this issue or is it just a case that WM6/Hermes and integral vehicle bluetooth simply do not work.
I have tried upteen ROM updates to no avail. Any advice would be greatly appreciated. BTW I have paired the brand new car (Fiat) successfully with a Nokia 5300, XDA Exec (WM6.1) and XDA IIi (WM2003)
Thank you all in anticipation.
291 said:
I have searched across all the forums and have noted that the Hermes does not pair with a Cars built in blue-tooth radio allowing sound through the built-in speakers.
Does anyone have an update to this issue or is it just a case that WM6/Hermes and integral vehicle bluetooth simply do not work.
I have tried upteen ROM updates to no avail. Any advice would be greatly appreciated. BTW I have paired the brand new car (Fiat) successfully with a Nokia 5300, XDA Exec (WM6.1) and XDA IIi (WM2003)
Thank you all in anticipation.
Click to expand...
Click to collapse
Pairing a Hermes with a Bluetooth Car Kit is certainly possible, and indeed routine. I have successfully paired with my two Ford cars, with a variety of WM5, WM6 and WM6.1 ROMs.
I merely followed the usual steps to set up a partnership, and ensured that the partnership was set as 'Hands Free' on the final page of the setup process.
So my experience is - no dramas, and I can't see why you are having problems. The car is, after all, just acting as a Bluetooth headset.
Transfer of contacts to your Car Kit is a bit more problamatical, as you have to set up Bluetooth Sim Access Protocol (BT SAP), to give the car, as it says, access to your sim card.
Hi and thanks for the response.
I have no problem pairing the hermes and it reads all my contact information and does everything I would expect save for the sound; I don't get any sound from the cars speakers and yet it all works perfectly with other makes/models of phone/pda.
I suppose the problem would be easier to solve if none of it worked but it does. I watch the car screen as it tells me I am making a phone call from my address book and I can see calls coming in but I cannot use the microphone on the PDA nor hear anything via the pda or the car's speakers. The XDA Exec (WM6) Nokia 5300 and XDAIIi (WM2003) work flawlessly (I borrowed those from my friends).
Thanks once again.
291 said:
I have searched across all the forums and have noted that the Hermes does not pair with a Cars built in blue-tooth radio allowing sound through the built-in speakers.
Does anyone have an update to this issue or is it just a case that WM6/Hermes and integral vehicle bluetooth simply do not work.
I have tried upteen ROM updates to no avail. Any advice would be greatly appreciated. BTW I have paired the brand new car (Fiat) successfully with a Nokia 5300, XDA Exec (WM6.1) and XDA IIi (WM2003)
Thank you all in anticipation.
Click to expand...
Click to collapse
291,
I've had the same problem...
But found this program... From JetWare Mobile - Its not free but there's a trial period to at least see if this fixes your problem...
http://www.jetwaremobile.com
Now My bluetooth on phone and car works flawlessly, including: Music connection (can play Mp3's from phone and contacts loaded to the car stereo) I was even able to get Voice Commander to work through the car stereo but could not get announcements to work (a known issue with VC 1.6)
Look at this post, may help...
http://forum.xda-developers.com/showthread.php?t=290871&highlight=75BT
Hermes with RT4 system
I have got th esame problems with my hermes and my Jumpy with RT4 and bluetooth connection. I can drive my hermes, make a call by the way of the RT4 but speakers and mic are out. The only solutions to make them working is to make call by my hermes ans after RT4 working good and for and incoming call, accept it by the way of my Hermes. With this solution, I can ear ans speak unsing bluetooth system. If some one can help me, thank a lot...
Hi!
I've got a Jabra BT3030 headset which works great with the phone and media player in my opinion. It's just that I have problems connecting.
First connection went fine, but when the device already is paired with the phone and I attempt to connect again it fails. I get to input a pin code then (standard should be 0000 according to manual), but it just says failed to connect.
If I unpair and pair them again it works (it doesn't ask for pin then).
Saw a fix on the Sony Ericsson forum where someone had this problem for Xperia, and they posted some cab file (Cyberon_Voice_Speed_Dial_v1.2___BT_Fix.cab), but I'm doubting it's possible to use on my Hero, and if it is, I have no idea how to do that.
Any thoughts?
Thanks.
You can't use any .cab's in android. and i think that fix is a registry fix and android doensn't have a fix.
i also noticed that bluetooth doesn't work without errors i hope that it will be fixed with android 2.0 we have to wait. but i didn't had any problems with my BT headset it also pairs automaticly.
Yeah I thought it wouldn't work... Well hoping for a fix.
Same problem here.
Yes I got the same problem with it not reconnecing. You can get it to work evensually by turn you bluetooth off and on afew time but i find it quicker just to unpair then repair each time. But apart for that, it works and sounds great.
Isn't 1234 the correct standard code ?
Problems with Bluetouth Headset Jabra BT3030
I have the same probleme, for me Jabra BT3030 Headset works wery well with WM 5,and 6 but doesn't works with WM6,1 or WM6,5
Is anyone has a solution or tips.
HTC Touch Cruise (P3650)
WM6,5
Manila 2D v2.0 build 19191432.04
Thanks.
Jabra BT3030 Headset with HTC
Yes, good news for me .
I did finaly fix my bluetouth Jabra BT 3030 with WM6.5 when I upgraded my HTC Touch Cruise from this (Hotfix to enhance the security mechanism of Bluetooth service)
http://www.htc.com/europe/supportdownloadlist.aspx?p_id=59&act=sd&cat=0
Now it works very well., I was a good hotfix for bluetouth
HTC Touch Cruise (P3650)
WM6,5
Manila 2D v2.0 build 19191432.04
Had the same problem with the BT3030 but suddenly it's not doing it anymore!
Just works great!
i bought the same one ... guys how many hours it should take for charge ? also i am very confused with the lights red. yellow n etc etc is there anyone using the same one ?& can give me bit manual how to use it .? would be very grateful..
http://www.jabra.co.uk/sites/Jabra/.../BT3030/Documents/UM/BT3030_UM_UK_EN_3124.pdf
sadape said:
http://www.jabra.co.uk/sites/Jabra/.../BT3030/Documents/UM/BT3030_UM_UK_EN_3124.pdf
Click to expand...
Click to collapse
Thanks Manual is really awesome .. that works
I've also had some strange problems pairing. Try holding the call button in for 6-7 seconds(instead of the 2-3 seconds) till the device shine solid blue and then pair from other device. This is the method I used to pair to the PC. Goodluck