Related
I see WM2k5 1.60c at Buzzdev.net but I can't upgrade because I can't create ".nbf" file. Please help me
Hi, Can you post the link on buzznet as i can't find it??
cheers
Buzz removed the upload. He will post it later on :roll:
Victor
It see it is available on the site!
The dump of 1.60c on Buzz's site is only a dump of files from his device that were used for his testing...
The installer package will be released later on this week / early next week, please be patient...
it'll be worth the wait !
I confirmed it already reposted by buzz. You can download it now. I already upgrade it to 1.60cWWE, but I didn't see any different.
Quite a bit speedier, can't see much else different tho.
Thanks for your time and effort Buzz! We appreciate it.
Hi Buzz,
Thanks Wooooo Hooooo!!!
Everything works fine!!! The speed increase is wonderful!
I have no words to express my gratitude!! You are da man.
I think a lot of people have been spoilt and miss the big picture! Buzz you have done a great job. Just a small comparison to prove this:
Still Broken:
- The buttons (I would love for these to work, its no biggie)
- MMS (Which I have no need for realy)
Fixed huge problems by using WM2005 vs WM2003:
- Bluetooth works like a dream
- Headset reliably works
- Car kit reliably works
- BT GPS reliably works
- Persistant Memory!!!!
- No lockups
- Faster!!!!
- Battery lasts at least twice as long
- We now have WMP 10
- There are several other benefits that the os brings
Respect to the man with the plan.
Regards,
Duan
hi guys
i have dowloaded the update but how do u install it, and do rekkon it will fix the tomtom5 reseting problem
Cheers
Neel
HI all,
intalled 96c but now can't get the extra 32mb storage to appear, unhide then unlock then run Hima_DOC_Tool_1.0.exe, reboot when asked but this cause hard reset and i have no 32nb storage???
can't install voice command, says i have not go enough room?????
currently have
storage 30.53 and program 120.32
any ideas.???????
Also tomtom won't install. Installation just crashes right after agreeing to the licence AAAAHHH??????
I followed Buzz's instructions so can't see what i have done wrong???
Griffy wiffy- any chance you can tell me how u installed it as i dont understand the instructions that come with it
cheers
Neel
Hi Neel, not sure what you are asking. uninstalled what??
Hmmm... I can only see forum on Buzzdev. Where did main page go?
What about the STK (Sim Tool Kit)?
Is it working as well?
I've tried 1.60h.
I worked flawlessly.
However, I have to go back to WM2003SE coz I really need and use this STK feature everyday.
Can someone tell me where can I find the cure for STK to be used in WM5.0, please?
Thanks.
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
tukmol said:
I have a problem downloading WM 5 v 1.60C. Can somebody upload the ROM please!!!! :roll:
Click to expand...
Click to collapse
try this :
http://twosx.net/ppc/WM2k5_1.60c.00WWE_XDA2_HIMALAYA.rar
:wink: :wink:
WM 2005 v1.60C !!
hi all,
after upgrade to wm 2k5 v. 1.60C
y i cant install program to 128mb storage ??
only can install to 31mb storage
thz for ur ansss
hi
after upgrading to 1.60c.00WWE, has anyone lost there Ram disk thing
im totally confused when it comes to Ramdisk, what on earth is it? does it make the memory available on WM5 more? more than the 60 mb we get for storage??
Sorry i know it's a stupid noob question but i really wanted to know
Cheers
Ash
Hi,
I just wanted to get navigon running. But i just can use andorra map. I have a few map files in map folder where andorra is located too, but i cant use them.
Is that a problem caused by froyo?
Am i the only one with this problem?
Thank you
Sent from my HTC Desire using XDA App
Hello,
I have install Navigon 2.6.1 on android on my HD2 with map,
but when i launch it, it ask to me an update for the file, so i have all file needed !
I can see some post where people says that Navigon must be install on "/sd card/navigon", but on my phone, it is on "/sdcard/navigon" without space !
Can this cause a problem ?
Somebody have test with succes ?
Thanks for any response !
Is my english so bad ?
i think it is asking u for the update because it is not updated in the registry.
Hi guys,
I have a problem with .net framework 3.5. My TG01 couldnt accept to install this app. Have you any solutions?
When I try to download it, windows says like "ops..this software didnt match your device. Your device hasnt capability to use it. Anyway you can chuck out it"
But I manage to download it my device but at that time my device says something that means I couldnt manage install this software.
Pls help me.
What's your OS, 6.1?
Jonous said:
What's your OS, 6.1?
Click to expand...
Click to collapse
No, my OS is 6.5.
3.5: http://dl.dropbox.com/u/6112805/NETCFv35.wm.armv4i.cab
3.7: http://dl.dropbox.com/u/6112805/NETCFv37.cab
Hello,
First of all I should Thanks "sternas" for his great rom. It works like a charm
my first problem is about Jblend. in my original rom when I use jblend for running a program, there is a bar in bottom of screen that can be use as left & right softkeys. but in Artemis rom when running a program, the bar is disappearing, so I cant use soft keys. actualy should say that in artemis rom, Jblend runs programs in full screen mod.
the second problem is about stopwach program. before installing the arabizer program (MOBIDiv Arabware)for reading arabic's SMS, it worked great. but after installing the mentioned program, stoped watch stoped working and every time I want to run it, it give me an error that there isn't enough memmory to run the program.
I'll be thankfull if anybody can help me about these problems.
Why don't you ask directly on Artemis thread?
Are you shy?
Thanks for your attention, but the problem is that my posts are under 10 so I can't post in that threat. so I asked it here. but nobody answered me.
actually I found the problem with the Jblend. It is beacause of a registery change that force program to run in full screen mode. (HKEY_CURRENT_USER\Software\JBlend\Full_Screen_Mode).
For the second problem I couldn't find any solution till now.
farafr said:
Hello,
First of all I should Thanks "sternas" for his great rom. It works like a charm
the second problem is about stopwach program. before installing the arabizer program (MOBIDiv Arabware)for reading arabic's SMS, it worked great. but after installing the mentioned program, stoped watch stoped working and every time I want to run it, it give me an error that there isn't enough memmory to run the program.
I'll be thankfull if anybody can help me about these problems.
Click to expand...
Click to collapse
Hi farafr,
@mistieger pointed me to your problem and asked me kindly to see if I could be of any help to you!!
as far as I can see this, the problem is the arabizer program. Although Artemis is a multilanguage ROM, it does not support Arabic, thus there might be an incompatibility between the arabizer and the stopwatch program. The only way to find this out is to deinstall arabizer, perform a soft reset and see if stopwatch is working again. If it works, it's up to you to decide what's more important for you: the arabizer program or the stopwatch.
Is it possible for you now to answer in Artemis thread? Otherwise use PM to answer.
regards, Kuzibri
Hi Kuzibri,
First of all thanks for yor attention, it's yor kindness to help a noob.
as u said I uninstalled the arabizer program. U were right. the program started to work again. but I want to know is there a way for me find out what's happen when I install the arabizer? for exaple a registery change tracker that help me to find what is affecting the stopwatch program. and also I wanted to mention that the arabizer also affect the "Tip calculator" program. (I found it yesterday).
Thank you again,
FarAfr
farafr said:
Hi Kuzibri,
First of all thanks for yor attention, it's yor kindness to help a noob.
as u said I uninstalled the arabizer program. U were right. the program started to work again. but I want to know is there a way for me find out what's happen when I install the arabizer? for exaple a registery change tracker that help me to find what is affecting the stopwatch program. and also I wanted to mention that the arabizer also affect the "Tip calculator" program. (I found it yesterday).
Thank you again,
FarAfr
Click to expand...
Click to collapse
Hi farafr,
you're very welcome my friend!! Regarding Arabizer and Stopwatch/Tip Calculator, I'm afraid there is no solution AFAIK for. Although Artemis is a multilanguage ROM, it does not support Arabic language, therefore there will be some incompatibilities between Arabizer and Artemis.
So, again: it's up to you to decide what's more important for you: the arabizer program or the stopwatch/tip calculator.
BTW, to be absolutely sure that there is no or a possible solution for your problem: send Sir Sternas himself a PM with your problems. Maybe he knows a solution (or not).
best regards, Kuzibri
Stopwatch and Tip Calculator
Hi farafr,
when my memory serves me well, these two programs are two of the latest applications developed by Sir Sternas himself for his new ROM. I cannot recall if they were already present in V65 (simply because I do not use them), but certainly in V66. Maybe the problems of these two apps with Arabizer is caused by this fact.
best regards, Kuzibri
hi guys am newbie here but i want to ask if anyone of you have the phone.bin of i617 coz am having a problem on flahsing that part i was able to update my OS to 6.5 but wont able to use my phone coz of that missing file.
i tried cheking it and its really empty.
I am using BADA downloader to program my unit...need it badly pls.
TIA...
natzkid said:
hi guys am newbie here but i want to ask if anyone of you have the phone.bin of i617 coz am having a problem on flahsing that part i was able to update my OS to 6.5 but wont able to use my phone coz of that missing file.
i tried cheking it and its really empty.
I am using BADA downloader to program my unit...need it badly pls.
TIA...
Click to expand...
Click to collapse
are you talking about the i617 device??