Related
run the sim manager program.
I installed WM2005 version 1.60b96 on my XDA II. It runs fine but I just cant seem to move my contacts from my SIM card to the PPC.
I tried using SIM TOOL KIT in the programs window and it says
" your simcard has no application installed"
WHat does that means?
Then I tried SIM MANAGER in the Contacts section and it said " The file SIM MGR cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file"
Help!
here's what u have to do:
:arrow: -open "file explorer",navigate to windows/simupload.exe
:arrow: -copy this file and go to windows/start menu/programs and paste a shortcut(edit/paste shotcut),then rename it to whatever u want(simcontacts.exe is an example).
:arrow: -now close ur explorer,go to start/programs and u'll find the shortcut....click on it....
greetings...
RAGO :lol:
thats it!
Thanks a lot bro, I was about to go back to WM2003se.
How to copy SMS from SIM Card to PDA
i have sms in my SIM Card. On various mobile phones, there is a function to copy sms into the phone memory. however, in xda, i can't find this feature. anyone, pls enlighten.
thanks.
bot
no option to get sms's out of the sim that i know off
could even be that it's impossible to do it
I have been reading lots of posts on the forum and got so far but now I'm stuck.
I have an XDAII and have managed to unlock and unhide the extended rom. now I can access the extended rom while XDAII is in the cradle.
I understand how I can add cab files to it and will be using the configcreator tool to edit the config.txt file.
The problem I have is; all the pockekpc software I have, is on my computer and I have only ever installed it through activesync the normal or official way. When ever I have tried to put the files directly on my phone and click on them I always get the messeage this is not a valid pocket pc application..... or something like that.
So how do I convert the software files I have on my computer to cab files so I can include them in the extended rom? :shock: ? :?:
To most of you guys this must seem like a nuby question sorry :roll: , but I can't seem to find the answer on the forum.....
Is there a tool I can use or a program that I can use to make useable cab files?
Also just a though when I install programs via activesync does my computer convert the files to cabfiles and then automatically transfer them to my device? if so can I somehow copy the cabfiles from the temporary location on my computer :?:
A step by step guide would be helpfull but any help would be appreciated :?
Thanks in advance
Daz
Some 'high-end' software will leave a copy of their cab files on a specific directory (i.e. you have a choice of choosing). Those you can just go to the directory and copy it. If you do not know what I'm talking here, nevermind
Anyway, for normal simple software, they will most probably extract themselves to temporary directory. Example
C:\Documents and Settings\'yourWindowsUserName'\Local Settings\Temp\
where 'yourWindowsUserName' is your username for the PC. My guess would be, try to search for *.cab files in your temp directory (i.e. as the above dir) before you install your software. THEN, start your software installation, and do a search again on the 1st setup screen, see if you are lucky And try to do another search after you're done with the setup.
Hope this helps.
Thanks for that I'll have a go.
Daz
I managed to edit my extended rom! 8)
I was able to add the cab files from tom tom navigator 3 and it installs them perfectly after a hard reset!
The only issue I have, when I run Tom tom for the first time after a hard reset I have to keep entering the activation code. Not really a major issue more of a pain.
Wonder if anyone knows how to get it to enter the activation code automatically :?: Bat file or something :?:
This sites really helped me with my tinkering I think its about time to donate
Thanks for all the help guys
Daz
adobe reader
anyone know how to extract the cabfiles from the adobe reader pocketpc exe file?
I've tryed to get them from
my pc's temp file when installing via activesync but the files are not cab files?
any Ideas?
DAZ
adobe reader
anyone know how to extract the cabfiles from the adobe reader pocketpc exe file?
I've tryed to get them from
my pc's temp file when installing via activesync but the files are not cab files?
any Ideas?
DAZ
Re: adobe reader
doortodoorsalesman said:
anyone know how to extract the cabfiles from the adobe reader pocketpc exe file?
I've tryed to get them from
my pc's temp file when installing via activesync but the files are not cab files?
any Ideas?
DAZ
Click to expand...
Click to collapse
Hi :
Here after what I do with succes :
When installing the application from ActSync, you must select "Storage Card" instead deffault location to install.
Then, you have to cancel the installation process before the progress bar on your PPC's screen ends.
A dialog box will ask if you're sure to abort the process.
At this stage, you go to storage card throught your PC Explorer, and you'll find the cab file there.
You save it away.
This cab file on the storaqe card will be automatically removed when you confirm that you really want cancel the installation process on the PPC's screen.
Or...
Go to c:\Program Files\Microsoft ActiveSync folder in your desktop and you can find there more cabs. Or simply find all the *.cab files on your HDD and you'll be surprised.
Thanks for this I will check out both methods
Does anyone know what the best freeware tool for modifying the cabfile is? and where I can download it :?:
Thanks for the help
DAZ
...
I think,that everyone here knows only WinCE Cab Manager from OCP Software. But this is commercial,but...on internet is everything...
I install Claunch. im looking the exe file of memory and remove programs, so no need to tiring tapping using stylus. I cant find it in windows folder or other folder.
can someone help me
up up anyone...please
testing crying ;-( ;-(
I'm rather new to these kind of devices so please excuse the ignorance.
I have an XDA Atom Exec, I upgraded to WM6 with this site successfully.
I also would like to install HTC Home and Customizer as I like the big clock and icons, however I can't seem to find instructions on how to install them. I tried using the search function but nothing came up.
Can someone explain it to me please? Thank you.
Have you downloaded the cab files for HTC HOME and CUSTOMISER , if so just go copy them to your phone and then navigate from the file explorer of the phone to where you have pasted , and run (tap) Hope this helps.......
If you have not downloaded them ....find Ironeagles thread on this forum , to find the links
Or you can download the cab from http://www.pocketemu.com/download8.html
Regards,
Carty..
Hi, thank you for trying to help.
I think the problem is that I can't run the "setup". It opens in Internet explorer just like on my PC, I downloaded another copy from Carty's site and the same thing happens. Do I need a special program to open the setup XML file?
Thanks again..
Carty said:
Or you can download the cab from http://www.pocketemu.com/download8.html
Regards,
Carty..
Click to expand...
Click to collapse
Hey Carty, I would like to ask about your Ultimate Theft protection. If I flash a new ROM, will it still be there?
xda noob said:
Hi, thank you for trying to help.
I think the problem is that I can't run the "setup". It opens in Internet explorer just like on my PC, I downloaded another copy from Carty's site and the same thing happens. Do I need a special program to open the setup XML file?
Thanks again..
Click to expand...
Click to collapse
describe in steps how you did your installation. we don't usually deal with xml files for installation.
jiggs said:
describe in steps how you did your installation. we don't usually deal with xml files for installation.
Click to expand...
Click to collapse
Well after downloading the zip file to my PC, I unzipped it in a created folder.
Sync'd my atom exec with the PC.
Opened File Explorer from ActiveSync, opened Program files on Atom Exec and just moved created folder with unzipped file into Atom.
After opened the created file from within the device and click "setup" with the stylus.
It opens up Internet Explorer and I can only view it as a document of some sort.
Hope that makes sense
No mate , you dont have to ZIP it (you are actually zipping the cab file which runs directly on the ppc , copy the .cab file without zipping it to your PC and then run ..)
This is what you do wrong
xda noob said:
Well after downloading the zip file to my PC, I unzipped it in a created folder.
Sync'd my atom exec with the PC.
Opened File Explorer from ActiveSync, opened Program files on Atom Exec and just moved created folder with unzipped file into Atom.
After opened the created file from within the device and click "setup" with the stylus.
It opens up Internet Explorer and I can only view it as a document of some sort.
Hope that makes sense
Click to expand...
Click to collapse
if you will list the contents of your zip file, that would be helpful. we don't normally copy files to program files for installation.
Thank you everyone... the problem was exactly what udayrulz was describing. I merely had to just move the file over to the device and click it, instead of unzipping, create a folder etc.
Thanks again, this plugin is much easier on the eyes!
No Problem , glad it worked out
Hai!
So I just copied the Android Froyo files directly onto my SD card, and when I try to open them on my HTC HD2 I recieve an error that the file cant be opened and I should try to reinstall it.
Any help ?
Bai!
When you unzip the downloaded zipped file on your PC, you should end up with an android folder. It's that folder that you need in the root of your SD.
It's detailed very clearly how to install and run Android on every single build page that I've read. You should start where you downloaded it from.
johncmolyneux said:
When you unzip the downloaded zipped file on your PC, you should end up with an android folder. It's that folder that you need in the root of your SD.
It's detailed very clearly how to install and run Android on every single build page that I've read. You should start where you downloaded it from.
Click to expand...
Click to collapse
I did that, same error.
Anyonez ?
Please
We're not mind readers. What exactly did you do and what was the error?
ALright:
- I copied the folder to my SD Card on the HD2.
- I go to 'Start' -> File explorer -> And then I select the audio file thing and after that the file to start the Android itself.
When I do the last step, I get an error that says:
The file "CLRCAD/HARET" cannot be opened. Either it is not signed with a trusted certificate, or one of it's componets cannot be found. If the problem persists, try reinstalling or restoring this file.."
Search for sdkcerts and install that on your phone. That should fix your problem.
Sent from my iPhone 5 beta using the XDA App
Does it matter where I extract the file to ?
Do I have to put it on my SD card or on my HD2 program files ?
THANKS!
Tried both locations, getting an error while installing the .cab:
'Installation of SdkCerts.cab has failed.'
Hey guy sorry if I didn't post right, butvi have a problem I just put a new build of android on my phone its cell core version, everything works fine like emulators, internet, etc. the only thing that doesn't work is when I try to download androzip for I can urar files and unzipped 7z files. I really need this program cause my computer is down, and that way I can do everything own my phone until I get it back up and running. I just wanted to now am I the only one having this problem or is there a solution to this problem. sorry again if I posted wrong I'm a newbie to forums never really had to use them but this problem is beyond. me. also I tried other builds like Mattc 1.7 & 1.8 still get a installation unsuccessfull if info I relevant. thanks in advanced sorry again if post wrong and if its too long.
gballer2020 said:
Hey guy sorry if I didn't post right, butvi have a problem I just put a new build of android on my phone its cell core version, everything works fine like emulators, internet, etc. the only thing that doesn't work is when I try to download androzip for I can urar files and unzipped 7z files. I really need this program cause my computer is down, and that way I can do everything own my phone until I get it back up and running. I just wanted to now am I the only one having this problem or is there a solution to this problem. sorry again if I posted wrong I'm a newbie to forums never really had to use them but this problem is beyond. me. also I tried other builds like Mattc 1.7 & 1.8 still get a installation unsuccessfull if info I relevant. thanks in advanced sorry again if post wrong and if its too long.
Click to expand...
Click to collapse
Make your own topic please.
So what point I am at:
- I copied the Android folder to my SD Card on the HD2.
- I go to 'Start' -> File explorer -> And then I select the audio file thing and after that the file to start the Android itself.
When I do the last step, I get an error that says:
The file "CLRCAD/HARET" cannot be opened. Either it is not signed with a trusted certificate, or one of it's componets cannot be found. If the problem persists, try reinstalling or restoring this file.."
-------------------
Then this person told me to download a .cab that would fix all the problems, and when I wanted to install it I got the error:
'Installation of SdkCerts.cab has failed.'
--------------------
And now I dont have a CLUE what to do! Lol
I am guessing you are running a stock windows mobile rom? You need to either run a custom rom or find "Advanced Configuration Tool" and install it so you can enable the rom to run all unsigned applications. Then you can run the android apps to boot it.
It is in the misc. section. More info: http://www.touchxperience.com/en/applications/advanced-configuration-tool.html
Uhm, where can I find a custom ROM :$?
I tried that Advanced Config, but when I try to run it on my phone it just gives me the error:
The file "AdvancedConfig" cannot be opened. Either it is not signed with a trusted certificate, or one of it's componets cannot be found. If the problem persists, try reinstalling or restoring this file.."
**** it, I will just peform a hard reset
Making a back-up of my contacts at this moment.
Peformed a Hard-Reset and the Android and all other files are working FKING GREAT!
Love you guys!
If you get that problem again, you should install an app called "bsb tweaks" (or a similar app) and set it to "allow unsigned"
this should allow you to install things that you couldnt before...........
Glad you got it sorted.
Thanks, John, for helping me out!