Hi,
How do I install Alpine Extended Rom: 1.11.112 WWE? Mine currently has 1.10.124 WWE...
Very simple, kill the "wcescomm.exe" process, and start installing.
Hi,
I have ended wcescomm.exe process. What should I do next? I believe the AutoRun.exe must run to execute the rest but I do not know how...
Don't waste your time, 1.11.112 is not an update, I have gone through this already and it is just the 1.10.124
Wait for the official one by 02, rumoured to be the new Magneto OS
S
I know that it is not big deal. I just want to learn how it is done. Can you please explain it -and how you did this- to me in detail please?
CANADABAT said:
Don't waste your time, 1.11.112 is not an update, I have gone through this already and it is just the 1.10.124
Wait for the official one by 02, rumoured to be the new Magneto OS
Click to expand...
Click to collapse
Where did you hear this? I'd be VERY surprised if it was Magneto that all we 2i owners are waiting for. Delightfully so, but still shocked to within an inch of my life!!
Ant
i'm still stuck on the original one. Does anyone have any tips for flashing to the latest rom. The files that are on the xda-developers ftp site i don't know how to use.
Thanks in advance!
Don't waste your time, 1.11.112 is not an update, I have gone through this already and it is just the 1.10.124
Guys- The files that are listed on WIKI IS NOT AN UPDATE!!!! Even though the file appears to be different!!!!!!!!!!
WAIT FOR THE NEW RELEASE BY 02
All of you are running 1.10.124, there is nothing newer
GET IT!!!!!!!
why does it have a different version then? I don't mean to question your authority or anything, but the version number is significantly different, which usually implies that things have changed.
No problem!!
Try running the so called update, I DID
When it was done, nothing had changed and it was still at 1.10.124
CB
CANADABAT said:
No problem!!
Try running the so called update, I DID
When it was done, nothing had changed and it was still at 1.10.124
CB
Click to expand...
Click to collapse
How did you -not- update it?
Give it up already!
Related
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Re: Official i-mate rom won't install after installing t-mob
jonburge said:
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Click to expand...
Click to collapse
I think you better try it using bootloader way, because t-mobile protect it's update, it happen in XDAI if you update your XDA to 4.16 and you want to go back to 4.11 then you have to update it using bootloader to be able to go back from the previous one 4.11 8) hope this help you...opps correction please there is no bootloader on XDA II, there is bootloader but in different way, I think if you copy your old nbf to sd using xdatools and go to bootloader by using power+anydirection+ reset it will ask to download the nbf to you device... hmmm if this doesn't work you have to look for another way.
T-Mobile 1.60 BUGGY Rom - Want to go back to iMate ROM
Folks,
I'm in the same position - Can someone please outline the success they've had going back from the T-Mobile 1.60 ROM to Imate ROM 1.5283??
Any thoughts would be great... (I'm guessing the boot loader using an SD card may work but would love to hear of any new tricks that people have learned on this
Cheers
Andy
I'll try to help.
Where can the ROM be downloaded, so I can have a look at it.
Jos
T-Mobile Back to iMate ROM
Thanks
I've uploaded the new iMate ROM image to:
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
The somewhat flakey T-Mobile 1.6.006 ROM (which I'm trying to get away from is at
http://www.c1au.com/iMatePDAROMS/TMobile160.zip
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
The new iMate ROM is meant to be the best bet around at the moment and my device is an iMate in the first place. The only reason why I installed the T-Mobile one was to get the Bluetooth GPS fix (which works well) - BUT so many other things aren't as stable!!
The new iMate ROM is meant to have the BT GPS fix as well.
Any help, much appreciated!
Cheers
Andy
Re: T-Mobile Back to iMate ROM
acurtis007 said:
Thanks
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
Click to expand...
Click to collapse
That's correct, you need to mod it.
I'll make a procedure for it.
Jos
THANKS!
You're a champion!
Thanks very much..
It sounds like there's a few people that'll thank you!
The other posts on the subject aren't too clear at this point - So it'll be great to clear up the issue for the iMate / XDA II.
All the best - Have a great weekend.
Andy
OK, made some time to create a batch file to upgrade.
Works only for upgrade from T-Mobile 1.60.06 NL to I-mate 1.53.82.
1. Download the ROM image ruu15283.zip from the site in this posting
2. Unzip the file with Winzip
3. You now get a file called ruu15283wwwe_cdl.exe
3. Extract this file with Winzip to a new folder
4. Extract the attached file to the same folder
5. Start the conversion and upgrade by double-clicking convert.bat
Since I'm out till Sunday, I can't check my mail to respond to problems.
Enjoy!
Can the first person brave enough to try this please confirm success.
IT WORKS!!
Jes - You're a scholar and a gentleman!!
And a *(&(&( good programmer
IT WORKED!
Thanks a million!
Let me know how to send you virtual beers or whatever
(or if you need a hand with anything - Please let me know!)
Cheers
Andy
Nah, I'm not a good programmer, I just know how to write bachfiles and how to combine things to get the disered result.
Thanks has to go to Isme. He knows a lot about the internal working of the XDA II, the ROMS and the bootloader process.
He wrote the great tool used to change the file headers, so you can update your machine with a ROM of a different brand.
He's a good programmer!
If somebody needs a mod to upgrade from another ROM version, please let me know.
And if you want to do something back, please donate to the people who keep this nice forum up and running.
It worked. For those who want to get back onto the official path from unofficial t-mobile this is an automated way to do it. Thanks...Jon
Backing Up XDA2 ROM+CE
I'm a new XDA2 iMate user, want to back up my ROM+CE before I screw things up. I did this on my XDA1 (power + software reset, then press contact button I think). Anyway, I always had my ROM+CE backed up to a 64M SD card ... just in case.
I've searched these forums for such a procedure for XDA2 ... no luck.
What is the process, if any, to backup the XDA2's ROM+CE image to SD card?
Appreciate any help,
Craig
I think it's possible with the xda2dmp tool, but you better ask Itsme, he wrote it.
You can find it on this site: http://www.xs4all.nl/~itsme/projects/xda/xda-ii.html
PHoto contacts wont work
I have an imate and i just upgraded it with the new rom, but now i have a problem that the photo contacts wont work... Is there a way i can downgrade to an older version of rom. I use to rely alot on the photo contacts.. anyone else have the same problem?? thank you
Installing i-mate ROM after T-Mobile's
Gentlemen ,
I did the same (install T-mobile ROM on an imate ) and I want to install the imate ROM update. I am not sure about the T-mobile ROM , but when I boot it displays the following :
R 1.06.01
G 1337.16
D 1.60.00WWE
Kindly advsie if the above mentioned patch work in my case .
Appreciate you kind advice !
Thanks!
Should work.
Just try it out. If it's not ok, you get country error when you try to upgrade.
Jos
Hi Jos ,
I tried it and it WORKS!!!!!!!!!! You are a brilliant guy !!!
I owe you one!!
My friend wants to install the T-Mobile Update because the windows CE version on the T-mobile ROM is newer than that of the imate. Any magic patches that can be done.
Note -> Please tell me of how can I be of any help to you in return for your support
All the best
If you want to do something back, please donate to this forum to keep it up and running without advertisements or banners (just click Donate Money on top of this page).
This is how to upgrade:
Works only for upgrade from i-mate to T-Mobile 1.60.06 NL.
1. Download the T-Mobile ROM image from http://www.xda-developers.com/incoming/rom160wwe/
2. Extract this file with Winzip to a new folder
3. Extract the attached file to the same folder
4. Start the conversion and upgrade by double-clicking convert.bat
Let me know if it works.
Grtz,
Jos
Difference between i-mate 1.52.00WWE ROM and i-mate 1.53.82
Can anybody outline the differences between the 1.52.00 and the 1.53.82 official i-mate ROMs?
I'm trying to ascertain whether I have sufficient incentive to upgrade (given the "If it ain't broke, don't fix it" mentality I subscribe to in my old age!).
Sufficient incentive might be;
:arrow: Faster GPRS
:arrow: Improved battery life
:arrow: Improved all-round performance.
Thanks guys.
Codenix
Just upgraded to i-mate from much-loved XDA!
English ROM
ROM: 20060426B1WWE
Radio: R060428N_MN1ARC_RS00049
ExtROM: EX0018
It looks like O2 were quicker that we thought! The new "official" ROM is available for download at www.seeo2.com
Good. D/L now!
Good news ??? Bad News ???? Any changes ???
Still D/L. Site is slow at only avg of 20 kbps!
damn! need to install everything all over again, any changes from test rom, need to know before install the new rom,
If there's not much difference i will stick to test rom.
damn! need to install everything all over again, any changes from test rom, need to know before install the new rom,
If there's not much difference i will stick to test rom.
Click to expand...
Click to collapse
try to backup first and after installation just restore it
NO! Do not restore over ROM upgrades. That is a sure way to ran into problems with your device. If you do not have time wait until you are free to upgrade. Otherwise you may ovewrite some new improvements with conflicting scripts.
NO! Do not restore over ROM upgrades. That is a sure way to ran into problems with your device. If you do not have time wait until you are free to upgrade. Otherwise you may ovewrite some new improvements with conflicting scripts.
Click to expand...
Click to collapse
Can you tell the difrent, restoring from spb backup you just restoring all you files and contacts
Restoring files and contacts is different from restoring programs. You can select pim data and documents to restore, but that is chicken feed. Even for a noob like me :lol: No offence please. Just stiring up some brightness here :roll:
oooohhh!!!! Just did an upgrade rom to "test only - not for sale".
Program memory is less than it was on the test ROM. Was a little over 30mb after soft reset, but now fresh flashed device shows only 26.83mb :evil:
downloaded and flashed the new rom.. and this sux! sam as the test rom.. all the probs i faced on it are still present.. :x :evil:
others are just the sam.. (camera, performance and stuff)
http://forum.xda-developers.com/viewtopic.php?p=280351#280351
and one extra thingy.. got a new "O2 AutoInstaller" which installs just a ringtone or two..
new rom 04 may
Home > My O2 Profile > Software Upgrade
Software Upgrade
The following software(s) are currently suitable for your registered device:
Xda Atom Xda Atom ROM upgrade (ENG) 20060426B1WWE
Latest Xda Atom system software upgrade encompasses improvements in overall performance, MMS application, camera application, GSM radio firmware and enhancements from Windows Mobile 5 AKU2. Released on 04 May 2006.
I gotta ask: Are you really in Norway? I thought I had the only Atom here... :wink: Also another posting of yours suggest otherwise.
i've got a solution for 2 of my probs.. waitin a little while before soft resetting after changin the volume n creating a new email accnt doesnt give me the probs i faced before.. guess the atom is slow in writin to the registry or something... :? but the autoconfig prob stil remains..
[incase u didnt kno the probs i faced on the test only rom aswel as this new rom frm O2, check my post below..]
Code:
http://forum.xda-developers.com/viewtopic.php?p=280351#280351
norway
i will come back norway 7 may, i am a norwgian live in vietnam 6 month in the year and i have used O2 the last 3 year
norway
i will come back norway 7 may, i am a norwgian live in vietnam 6 month in the year and i have used O2 the last 3 year
hELP
I get a country code error when i install this rom wat do i do please help
Re: hELP
dnetzone said:
I get a country code error when i install this rom wat do i do please help
Click to expand...
Click to collapse
1. remove the mini-SD card;
2. press "Camera"+"Reset" buttons at the same time, then run the rom update.
Re: hELP
storm99 said:
dnetzone said:
I get a country code error when i install this rom wat do i do please help
Click to expand...
Click to collapse
1. remove the mini-SD card;
2. press "Camera"+"Reset" buttons at the same time, then run the rom update.
Click to expand...
Click to collapse
dya mean putting the atom in bootloader mode?
wat r the changes of failure and how to get atom out of the bootloader(is it done by resetting ?) reply soon
This is probably a newbie question. When I flashed from the Cingular Rom 2.4.502.0 to both the QTEK 3.6.251.0 and then the 3.6.261.0 my Radio version changed from 4.1.13.22_02.45.30 to 4.1.13.28_02.67.30.
Can anyone tell me Why the difference, and does it matter? Will this harm my StarTrek?
It wont harm anything. It is just new version, probably some bug fixes etc...
where did u get the 61 from...
there is also a link to RUU_STAR100_4_1_.1.502.1_02.79.30_CWS_SHIP in the wiki
shogunmark said:
there is also a link to RUU_STAR100_4_1_.1.502.1_02.79.30_CWS_SHIP in the wiki
Click to expand...
Click to collapse
so is that the latest then... not actually have my phone yet as having to get it to replace my dead universal until the toshiba phones are released...
How can I downgrade the newSPL(3.50) to oldSPL(1.20) ?
jacoblu said:
How can I downgrade the newSPL(3.50) to oldSPL(1.20) ?
Click to expand...
Click to collapse
i already opened a thread about this and noone seems to be answering the question.. i am afraid my device is ruined already and most likely because of the new spl.. i am so upset.. the whole device is acting wierd, i even went back to ap3 and still having the same problems.. it seems to be the spl coz nothing else changed! i want to flash stock rom. any idea how to go back to normal???
Guess, all bros here prefer we have our device upgraded then otherwise.
I too encountered the bootloader loop after executing the AnthenaUpdater.
Best of all I cannot load AP4 and I cannot goto activesync mode.
Seeing the bootloader screen tell me there is hope, so next.
I flash AP3newspl by cmonex, http://htc-hackers.com/uploads/ap3newspl.zip
Not sure I re-flashed the AP3 rom, sorry, quite excited during the recovery process.
As soon as I get to see AP3, I continue instructions as prompted on screen until I have the
Activesync running. Once the sync is stable and established good connection with pc,
I immediately proceed and re-try flashing AnthenaUpdater.
It finally flashed the AP4 rom. The princess found the frog.
I hope my little experience may of help to you. Cheers.
I;ve also learn to leave the usb cable connected for a little longer to ensure all activities are completed.
hi, me too
I felt ap4.0 maybe is slow so i tried to go back to 7510(or 7501) original rom but stopped at loading..... scene
So i tried tried and flashed ap3.0 rom and t-mobile ...... but everytime rebooting device is starting as hardresetted.
Never come back to original rom never go to ap 4.0
so after rebooting ,as above posting, while activesync is active, I ran apupdater but the bootloader didn't come but hard restting_after scene so ap 3.0 or 7501 rom was starting....
desperatly, as soon as updater was finalized and before bootloader started, I pressed down volume_key+camera key +soft reset hole....
manually loading bootloader...
I succeeded in flashing ap 4.0
And felt good operating.
Everybody can experience this case .
This is from spl ver. I think.
^^
As far as you willingly go back to ap 4.0, your device will remain beatiful athena.
I think some explanations needed......
Is this my own world's case?
.......................................afraid.......
see the wiki
jacoblu said:
How can I downgrade the newSPL(3.50) to oldSPL(1.20) ?
Click to expand...
Click to collapse
This and other issues are in the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
Really everyone should read this and all the info available before you flash!
as you have found out, there is no way to revert to the old SPL yet!
I downgraded to AP3 Old SPL, It runs fine. However, I got the following error with other Roms downgrade:
"FOUND SPL V1.20
DOWNLOAD SPL BEFORE V3.03 IS NOT ALLOWED"
What does it mean?
It means, as has been said MANY times before, if you upgrade to AP4 you CANNOT downgrade to anything except the hacked AP3.
niceboyyy said:
I downgraded to AP3 Old SPL, It runs fine. However, I got the following error with other Roms downgrade:
"FOUND SPL V1.20
DOWNLOAD SPL BEFORE V3.03 IS NOT ALLOWED"
What does it mean?
Click to expand...
Click to collapse
I got the same message.
And first Scene after rebooting is crashed as like a gray darkness mess.
after ap 4.0 reupgrading, all worked fine.
lakeman said:
This and other issues are in the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
Really everyone should read this and all the info available before you flash!
as you have found out, there is no way to revert to the old SPL yet!
Click to expand...
Click to collapse
You mean that it can't revert to old SPL? but after flashing this newSPL(v3.50.OliNex),my original rom can't be flash back! Because I'm a chinese,I need the chinese language rom.
How can I downgrade to chinese WM6 rom?
Confucious said:
It means, as has been said MANY times before, if you upgrade to AP4 you CANNOT downgrade to anything except the hacked AP3.
Click to expand...
Click to collapse
Except the hacked AP3(http://htc-hackers.com/uploads/ap3newspl.zip),
have any other chinese wm6 rom for the new SPL?
jacoblu said:
Except the hacked AP3(http://htc-hackers.com/uploads/ap3newspl.zip),
have any other chinese wm6 rom for the new SPL?
Click to expand...
Click to collapse
What the heck is that you've linked to?
Why didn't you read before upgrading? It was made quite clear that this was a now ROM that required a new SPL and could not be downgraded. Olinex has since made a version of AP3 that you can downgrade to and in future a full downgrade path will be available. It is not available yet.
jacoblu said:
Except the hacked AP3(http://htc-hackers.com/uploads/ap3newspl.zip),
have any other chinese wm6 rom for the new SPL?
Click to expand...
Click to collapse
只能装他的ap3。。这个ap3能运行在new spl下
其实ap4比ap3好，只要把那个划屏的选项关了在横屏下就好使了，也不卡。。不用划屏不就行了。。。
cqwww said:
只能装他的ap3。。这个ap3能运行在new spl下
其实ap4比ap3好，只要把那个划屏的选项关了在横屏下就好使了，也不卡。。不用划屏不就行了。。。
Click to expand...
Click to collapse
Many from different country had tried their best to express their thought here in English too. Some may not write good English but they still show respect to members here.
I do not understand why you cannot or do not wish to exercise a little basic courtesy of sharing your thought in simple English.
My first language is not English.
pdajoy said:
Many from different country had tried their best to express their thought here in English too. Some may not write good English but they still show respect to members here.
I do not understand why you cannot or do not wish to exercise a little basic courtesy of sharing your thought in simple English.
My first language is not English.
Click to expand...
Click to collapse
install input method ~
Needing Downgrade - Waiting Patiently
First off - the AP4 is an excellent Rom - Great work! Thanks!!!! I was an early adaptor and unfortunately my headphone jack shorted out my internal speakers and now of course trying to reflash to the original HTC wm6 shipped rom so I can submit it to warranty, I found the dreaded spl-v3.50 not acceptable warning. Yes, we were forewarned about this (though I confess I missed it). So I URGE any of you who are still under warranty NOT TO UPGRADE to AP4 until Olipro benovolently provides us a true downgrade path to the factory roms or you are absolutely positive you don't want to make a waranty claim. If you are not under warranty - I highly recommend AP4. If you are under warranty I highly recommend staying with AP3 as you can downgrade AP3 to the original factory roms.
My two cents worth as I wait patiently for Olipros downgrade path to the original roms - and I will be donating handsomely for this...
hello
any progress from the dev team ? it is a great rom but for sale our athena it is best to downgrade and to instal a shipped rom...
Regards
alyn99 said:
unfortunately my headphone jack shorted out my internal speakers
Click to expand...
Click to collapse
are yiu sure this isn't just the problem that has affected just about every HTC phone and is easily fixed by poking either the headphone jack in and out a few times or wigling a matchstick/paperclipin the hole?
No need for a waranty claim!
Confucious said:
are yiu sure this isn't just the problem that has affected just about every HTC phone and is easily fixed by poking either the headphone jack in and out a few times or wigling a matchstick/paperclipin the hole?
No need for a waranty claim!
Click to expand...
Click to collapse
Not only from HTC, I encountered it with Atom and HP6828 device as well.
Poking to correct the contact may help but do not apply too much force.
The jack cannot be replaced individually, whole main board have to go,
as I learned from the service centre.
hi.. i have an htc mozart Europe(401)... with Mango.. spl 5.10 now i wish to downgrade for flash Custom Rom ..i found many previous official Roms but i never can Downgrade.... at 1% it stop.... i think it depend by spl.. how can downgrade it?? i tryied with zune but bad results... help me plzzzz thank you
this is my phone:
OS version: 7.10.7720.68
firmware revision: 2250.21.51007.401
hardware revision: 0004
software radio version: 5.71.09.02a_22.51.50.21U
Hardware radio version: A.102.0.D4
bootloader version: 5.10.2250.7(133065)
proc. verion SOC: 2.2.5.0
Any Experience about that?? i think last Official upgrade have blocked something.. i feel my device still not mine
Read next posts.. i resolved it with y-cable and micro-usb adapter (i spend 9$)... hope its usefully also 4 you.
SEEYA Luca
Lukariello said:
hi.. i have an htc mozart Europe(401)... with Mango.. spl 5.10 now i wish to downgrade for flash Custom Rom ..i found many previous official Roms but i never can Downgrade.... at 1% it stop.... i think it depend by spl.. how can downgrade it?? i tryied with zune but bad results... help me plzzzz thank you
this is my phone:
OS version: 7.10.7720.68
firmware revision: 2250.21.51007.401
hardware revision: 0004
software radio version: 5.71.09.02a_22.51.50.21U
Hardware radio version: A.102.0.D4
bootloader version: 5.10.2250.7(133065)
proc. verion SOC: 2.2.5.0
Any Experience about that?? i think last Official upgrade have blocked something.. i feel my device still not mine
Click to expand...
Click to collapse
Welcome to the spl 5 club........Your solution: WAIT!!!!!
so sad for this Spl 5
Hope great devlopers on here can find something to made Flash Rom possible also after Update. ..anyway for now.. I think i have to wait and Hope.....
see ya all.
Lukariello ... newbie in Spl 5 Club.
Ok....we wait
Also got the same problem.Hahaha.....maybe will sell this phone within a month
oh.. i'm only have to wait..
I'm sorry you want sell your Phone. It's good Phone, fast, and not too expensive.. I think i wait any solution.. Also 'cause i cant sell it.. Was my b'day gift.
i was thinking.. If anyone have a Zune backup of NoDo or pre-nodo can i restore from that backup?
Lukariello.... Waiting solution for SPL 5.10
I've got the same problem after installing tmo-de 1.09 -> htc-europe 1.30 -> zune updates to 7720. I wanted to flash official ROM (which would be updateable by zune) with Polish language. Everything went fine, but I've got only DE, EN, ES, FR, IT languages.
Does anyone know if there's a possibility of adding a language pack (cab?) at this stage? I want Polish language so bad!
Unfortunately I cannot roll back to any sub-spl4 rom and thus cannot install hspl/rspl...
eave said:
I've got the same problem after installing tmo-de 1.09 -> htc-europe 1.30 -> zune updates to 7720. I wanted to flash official ROM (which would be updateable by zune) with Polish language. Everything went fine, but I've got only DE, EN, ES, FR, IT languages.
Does anyone know if there's a possibility of adding a language pack (cab?) at this stage? I want Polish language so bad!
Unfortunately I cannot roll back to any sub-spl4 rom and thus cannot install hspl/rspl...
Click to expand...
Click to collapse
CAB??? As in London or New York cab??? Just kidding !!!! Mine is sitting in the drawer now in the meantime i m keeping myself busy with an ACE.
Chin up everyone and hope our mango does'nt turn to LEMON
what a funny
ndmuni said:
CAB??? As in London or New York cab??? Just kidding !!!! Mine is sitting in the drawer now in the meantime i m keeping myself busy with an ACE.
Chin up everyone and hope our mango does'nt turn to LEMON
Click to expand...
Click to collapse
you're so funny...
anyway really hope anyone found a solution to permit me and other Mozart-Mango-Spl5.10 to flash one of that cool custom Roms...
well it's good that we are still taking this in a lighter mood..but on serious note i feel cheated...to view all possibilities of win7 cooked ROMs but not been able to experience it...i love my mozart and will do stick to it..but Microsoft is playing real tough games...do they really want to sell their OS or not
not sure about but if you flash a old nodo Rom , do the Bootloader also go back to an older version ?
im not sure too, but....
Preyer11 said:
not sure about but if you flash a old nodo Rom , do the Bootloader also go back to an older version ?
Click to expand...
Click to collapse
As in Title.... im not so sure but i think 1st step is to downgrade to NoDo. or Pre-nodo is better with stock rom, then have to see if your bootloader not change, you have to get 1 official update by zune.. then u should receive SPL 3.xx, then u can install RSPL, etc etc..
Lukariello said:
As in Title.... im not so sure but i think 1st step is to downgrade to NoDo. or Pre-nodo is better with stock rom, then have to see if your bootloader not change, you have to get 1 official update by zune.. then u should receive SPL 3.xx, then u can install RSPL, etc etc..
Click to expand...
Click to collapse
buddy the downgrade to a NoDo or Pre nodo is not happening for SPL 5 and that is what we all, with mango update are stuck up with
Dissatisfied
After one year of struggling with an unfinnish product and when I finnaly started to really love my Windows Mobile again, I ended up in the same situation. Single most disappointing Microsoft experience ever for me, period.
I used Goldcard to flash old bootloader
verynuclear said:
I used Goldcard to flash old bootloader
Click to expand...
Click to collapse
What spl were u on? I ve used goldcard on my ex-wildfire, i thought it does'nt work on mango
ndmuni said:
What spl were u on? I ve used goldcard on my ex-wildfire, i thought it does'nt work on mango
Click to expand...
Click to collapse
I was on SPL 5
Here is what i did
First i used 2GB Transcend to generate goldcard using my wife HTC Wildfire S, then i removed the SD card from the wildfire and inserted it in a card reader.
I opened the SD card and deleted any folder generated by wildfire.
Then i used my handmade Y cable as instructed but flashing process started after aboult 3-4 mins, so you have to wait for flashing process to start, it will not start after inserting immediately.
Bye
verynuclear said:
I was on SPL 5
Here is what i did
First i used 2GB Transcend to generate goldcard using my wife HTC Wildfire S, then i removed the SD card from the wildfire and inserted it in a card reader.
I opened the SD card and deleted any folder generated by wildfire.
Then i used my handmade Y cable as instructed but flashing process started after aboult 3-4 mins, so you have to wait for flashing process to start, it will not start after inserting immediately.
Bye
Click to expand...
Click to collapse
After which you use RUU to flash lower spl rom, right?
So far when i tried to flash after 1% the phone reboots, so i will give it a try. Generating gold card is easy with the Y cable, i dun know, but i m going to try this weekend, fingers crossed.
ndmuni said:
After which you use RUU to flash lower spl rom, right?
So far when i tried to flash after 1% the phone reboots, so i will give it a try. Generating gold card is easy with the Y cable, i dun know, but i m going to try this weekend, fingers crossed.
Click to expand...
Click to collapse
Yes, Right
I renamed it and copied it to the SD card in the card reader.
Try and you will success.
What about the new way that was published here
http://forum.xda-developers.com/showthread.php?t=1271963
Try it on your SPL 5
verynuclear said:
Yes, Right
I renamed it and copied it to the SD card in the card reader.
Try and you will success.
What about the new way that was published here
http://forum.xda-developers.com/showthread.php?t=1271963
Try it on your SPL 5
Click to expand...
Click to collapse
I tried that with omnia 7 which i also updated to mango, alas it did not work for me, as my upgrade did not have internet sharing while others have, as i was selling the ph i did not bother again but i quite like the mozart so i will try both way now.
Cheers have a nice weekend
ndmuni said:
I tried that with omnia 7 which i also updated to mango, alas it did not work for me, as my upgrade did not have internet sharing while others have, as i was selling the ph i did not bother again but i quite like the mozart so i will try both way now.
Cheers have a nice weekend
Click to expand...
Click to collapse
Hi my friend
After the new way that published to Interop Unlock, i returned back to SPL 5.11 and applied the 7740 update, but unfortunately i still unable to deploy apps.
I am now using Goldcard again.
While applying Goldcard method your device will restart once to confirm bootloader change and then it will complete normally.