I'm trying to use the Navigon 5 with my Emtac Crux II Bluetooth GPS, but everytime I start it, all is ok, but after 2 or 5 minutes I lose the GPS signal, but the GPS is working ok.
Anyone know how to fix this?
I'm using WM2003SE.
In TomTom 5 all works fine.
Thanks
Sorry I post in english, but this is an international site and we must communicate in comon language.
Did you chek at www.navigon.com the compability to your gps receiver?
I'm waiting for my software to try this program and after try it I can send you a feed back.
For now I can post hear the FAQ about GPS, in Navigon site:
"Can I still use my old GPS Receiver with MN|5?
Yes, all GPS receivers offered by NAVIGON so far (including those with TMC) can be used with MN|5 as well as all other GPS receivers that are NMEA compatibel and transmit VTG and GGA signals. This is expected to be a standard with almost any receiver available and can be checked at the producer's website."
I know that your gps, like mine because are the same, use all those protocols, so you must see if you have a bluetooth problem or if the protocols are recognized by the software.
Regards
Marcus
change the poi from the maps of tt3 and put it in the maps on the maps of tt5. it will fix the problem.
I already searched Navigon site for some answers and I got nothing, and yes my GPS is compatible, it's in the list.
I'm talking about Navigon 5, not TomTom 5.
I have different problem with Navigon|5 (maybe the same ? )
Here is my post:
http://forum.xda-developers.com/viewtopic.php?t=23612&highlight=
Did you install version for PPC2002 or WM2003? I've read, that version for PPC2002 works more stable i faster.
Did you switch your GPS into correct mode ? GGA=1 and VTG=1 ?
I think, that your any my problem are the same because my Navigon5 works correct as long as it doesn't fix gps signal.
Where did you install navigon software (RAM or SD card) ?
Did you try to communicate with navigon's support ? I tried many times and didn't get any answer.
I'm really disappointed, how this software works.
Regards
Darek
I think that I found the sorce of my problem.
My problem is that i'm using a cracked version of Navigon 5, and for what I read the crack don't work well and after some time of use the connection with my GPS falls.
I hope I can find a working crack somewere.
Related
Hello xda-users....
I've got a little problem with my xda using tomtom.
I've added the GPS part (V209) of Tomtom diretly to the Rom.
I'm using a WM2003 ROM.
I had opened GPS an got the error "COM1 does not exist".
So exiting GPS and disabled infrared.
Opened GPS and the problem still exists.
I did not get it working. Tried some Soft and Hardresets.
May this be a problem because:
a) GPS is in the ROM
b) No other TomTom Software installed
c) Only the files from V209 are used
d) No Activation of TomTom has done (Don't know how to activate GPS...)
e) ???????
Anyone could help me?
Stefan
Hmmm, turning off the infrared port worked fine for me. Is it an actual TomTom GPS receiver or a third party? Have you set the NMEA/Sirf parameters to match the module?
Moonstar said:
Hmmm, turning off the infrared port worked fine for me. Is it an actual TomTom GPS receiver or a third party? Have you set the NMEA/Sirf parameters to match the module?
Click to expand...
Click to collapse
It's a third party GPS Reciever (Haicom)
It already worked.....
The Problem is, that i couldn't set the settings to Serial cable atteched to COM 1.
I got the error:
Cannot open Com1:
Port does not exist
:?
Turning infrared off, worked for me in the other cases too.....
Stefan
Comm 9
Hi LumpiStefan
I had the same problem when I had the XDA, change the comm setting to Comm 9.
I was also using the Hiacom HI-203e. and this worked for me...
Hope it helps.
Sno...
do you suffer with disappearing check boxes?
i fixed mine after flashin rom 4.01.00 by the following
install navigator and voice prompts but not gps
upgraded to navigator 2.24
then installed gps 2.09
no checkbox problems or com1 errors.
Got another hint to disable folderable keyboard. Will test all given solutions today.....
Hope one will work.
Thx to all
Stefan
The folding keyboard driver will also snatch com1 for its own use.
Ok. Problem solved.
Com9 didn´t work for me. Problam was the Keyboard-driver...
Stefan
MDA-Vario (T-Mobile) Pocket Wind. 2005
All,
I tried to install a Bluetooth-GPS-Antenna (Mod. Xaiox -Skysurf V3) - this seemed to be partially successful. The GPS-device was identified - but with a ?-Mark - so I don't know the status as such. Just 2 references were given - incoming-port COM6 and outgoing COM7.
Second I tried to activate the GPS-Antenna with the Navigon 5.1-Software - this program normally identiefies the GPS-Antenna automatically - didn't work. Optionally the user may define ports being scanned ond the MDA. There were only the ports
COM1(ser), COM2(Xpanel), COM3(IrCom), COM4(Infrared), COM8(Serial USB) an COM9(QDATA).
The ports 5, 6 an 7 are not listet and shown.
Finally I have not been able to install the application with GPS-support.
I would like to find out who has similar experiences and possibly found solutions to it.
Thanks in advance.
Prima
bluetoouth GPs antenna issue
hi,
I add a similar trouble with my niki100.
I just boot a niki100, with orange provider in france. I'm tryng to use a bluetouth gps antena.
both equipement (phone & antenna) are copled but when I'm launching the navigor software then the gps peripheric is shown. that it good but this is only during approximatively 10 seconds.
I checked all configurable possible, including the verification of the saving alimentation rule.
withou success, all is working well but onlyfor a very short period.
I tried the antenna with another pda, it is working well. all tests were done with success. I don't understand whynot with the niki.
I did a complementary test, I tried the niki with another gps antenna and it is working well too.
I conclud about a compability issue between my antenna and the niki. maybdo to the bluetooth version.
is it existing a .cab to update the bluetooth driver?
thank you.
after to have tried many rom and radio without success I finaly booth a new antenna buetooth v2.0
I will sale my old antenna to someone having a older phone.
Orbit2-- GPS cannot be detected with IGO PLS HELP?!?!?
I have a HUGE problem with getting my GPS running on my Orbit2. It came from O2 with CoPilot7 preinstalled with the maps of UK and Ireland, which I dont use, because I am not located inthere, nevertheless Copilot detects GPS signal and shows positioning, but i dint have the maps for the area that i am in.
I tried to install IGO6 and then IGO8 but I have the same problem-- it cannot detect GPS device, no matter what which COMM Port and BAUD Rate I select.
How come CoPilot detects, and IGO does not? I read that Orbit2 is not locked?!?
Should I boot the whole device using some other ROM.
Please do not double Post
I suggested an answer for you over in the Athena post. In the future, please do not double post as this only clutters the forum.
I've connected bluetooth GPS to 3125, seemed to be OK (it asked about pin and after that info about equipment beeing connected).
Unfortunatelly GPS software doesn't communicate with GPS equipment. It is searching for bluetooth GPS but doesn't find it. I tried to set connection (port, baud rate) manually but I don't know which COM port is assigned to bluetooth
Is there any way to check this on ?
P.S. I've installed WM6.1 standard by Erofich
try 6.1 pro
I found that bluetooth is using COM6.
The biggest problem was in finding properly working GPS software
hi bchrubas,
Which GPS software are you actually using on WM6.1 standard?
I tried WM6.1 pro for a while but found WM6.1 standard more handsome since I manly want to use my phone simply as a phone
Anyway I'm still missing a good GPS program for navigation which is not intended for touch screen devices.
For now I stucked with Sygic McGuider (http://www.sygic.com/)
It doesn't need touch screen and StarTrek (or At&T 3125) is on the list of compatibile devices. MCGuider runs on STK quite fairly, I didn't noticed any major errors, maybe if it was little faster? (I know that it is possible to overclock this phone but i'm not quite sure about it
Anyhow, I'm stiil searching for some simple GPS track loging software
I looked around a bit and on smartphone-freeware.com I found these two programs:
gpsVP
chtiGPS
both seem to be able to do the loging. And the first one might even be worth trying as a navigation software for me.
not bad, especially this gpsVP
if it really support Garmin format maps it could be very useful
I have a Toshiba TG01 touch phone with gps. I loaded mm successfully including maps. However after a variable amount of time from 10 seconds to 5 minutes the mm software automatically closes and the phone returns to its home page. It always finds a gps signal so it's not even that. I've tried changing power settings on the phone. Reloading the software but nothing seems to help. Please help anyone who's had a similar problem on any device. Thank you
thtc62 said:
I have a Toshiba TG01 touch phone with gps. I loaded mm successfully including maps. However after a variable amount of time from 10 seconds to 5 minutes the mm software automatically closes and the phone returns to its home page. It always finds a gps signal so it's not even that. I've tried changing power settings on the phone. Reloading the software but nothing seems to help. Please help anyone who's had a similar problem on any device. Thank you
Click to expand...
Click to collapse
I never used the Memory map, but Garmin Mobile XT and IGO 8 work perfectly on my TG01.
+1 garmin the best
high detail maps and acuracy
Errmm, this is Memory Map, not car navigation like Garmin or iGo.
All I can say is that MM on my TG01 has never closed down on its own. What version are you using?
Thank you for your replies. I have recently updated the mm to version 5.4.2 I hadn't loaded the previous one onto the tg01 so i dont know if that would make a difference. If I turn the satellite off by just altering the com port then mm stays on, could it be something to to do with the gps?
My version is 5.1.3 build 716, I haven't had a previous version loaded. I'm running it through GPS Gate as I need to use that for Tomtom anyway.
You could try using a different ROM and Radio stack.
nueloc said:
+1 garmin the best
high detail maps and acuracy
Click to expand...
Click to collapse
Hello nueloc,
I have garmin xt but I can not get it to work. Would you be able to tell me installation instructions. Garmin will not recognise key. I have tomtom working but i wanted to try another sat nav as it seems garmin could be the preferred choice.
thanks,
Rick