I've dropped my Qtek 2020 / XDA II several times, and last time some of the plastic on the back broke.
So........ where can I get a new housing / case for my XDA?
I'd like to know too. As well as a couple of cracks in the housing, I've also gradually lost the chrome on the edges of the direction pad. As I originally bought my XDA2 second hand, I can't take it to O2 for repairs.
I've kept an eye open on eBay, but apart from one auction a long time ago I've never seen any replacement housings up for sale.
I think O2 service centre will carry out repairs if you pay.
yep - but that will cost me around 150 euro
Anyone :shock:
have you try http://www.siansmobiles.co.uk/
Thanks!!!!!
malkekoen said:
I've dropped my Qtek 2020 / XDA II several times, and last time some of the plastic on the back broke.
So........ where can I get a new housing / case for my XDA?
Click to expand...
Click to collapse
Evening,
I purchased a dummy Xda 2 from eBay for 20 euros inc p&p from Germany. Simply needed a torx 6 and a very small phillips and it took about 5-10mins to change housing, now mine looks like new even included a new stylus, the only problem is the barcode sticker containing IMEI found behind the battery cannot be swapped over.
If you want to try this mail me if you need help
Regards
Liam
mila81 pl help me man.......
i dropped my i-mate 2-3 times , loosing its colour .
can u tell me where can i get i-mate housing .
thanks dude.
Re: mila81 pl help me man.......
isk2005 said:
i dropped my i-mate 2-3 times , loosing its colour .
can u tell me where can i get i-mate housing .
thanks dude.
Click to expand...
Click to collapse
Not sure about i-mate, I would just keep checking eBay for i-mate dummy, there is an Xda II dummy
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=80478&item=6411671474&rd=1&ssPageName=WDVW
XDA casing cost a lot becouse it has a 4 layer.. one at the front one at the center and one is the cover for battery and the last one is the black on the upper back of the xda..
Hello to all.
I'm looking for housing for my xdaII. I search on the net for housing for qtek 2020,spv M1000,o2 xdaII but I can't find anyone,not even on www.siansmobiles.co.uk. anybody know where I can find what I'm looking for?
many thanks.
Hello, you can make a question at www.buy-online.ro or www.q-tek.ro , if you find one let me know.
from q-tek.ro I receive answer but no hope for me.they say that never happened,and this product is not for sell,maybe if I send xda they can try to send to producer for repair,but this will cost to much I think.
still looking for housing or dummy,maybe I'll find somewhere.
gabiz_ro i advice you to try again because one of my friends had a broken display and they were able to provide a new one for him, and i know that this was't possible about 2 moths ago. Maybe now they can help you.
thanks for info
Related
does n e body know why i can buy a new xda ii motherboard from or even a second hand on that hasnt been iemi bared pm me plz
Hi,
How much you looking to spend? I've got an XDA II that I can part. It works perfectly and has the newest version of ROM.
13hours on the Call Timer
not sure how much they are worth there in nothing wrong with the one i have but i got ripped of good style i paid somert like 300 pounds for it in the box but found out it had been reported lost so they bard the imei number making the phone part usless over here in the uk my board would work over there no problems at all tell me how much you are looking for the new board and i could possable even send you this one i have back to you
Hi,
I bought mine used on eBay... It works fine here in Canada, not sure whether it was barred in UK or not.
According to the Seller, it wasn't barred anything. Not looking for a new motherboard. I am selling the phone in parts or in whole soon.
not sure how much they are worth there in nothing wrong with the one i have but i got ripped of good style i paid somert like 300 pounds for it in the box but found out it had been reported lost so they bard the imei number making the phone part usless over here in the uk my board would work over there no problems at all tell me how much you are looking for the new board and i could possable even send you this one i have back to you
Hi,
PM me with an offer and we can work something out.
You'll need to use the retainer (for LCD connector) from the motherboard you have; My retainer broke when I tried to remove the cable. I'm holding it on with a piece of film negative right now.
I have a uk blocked motherboard, pefect order but barred in uk because of insurance claim. £50 wanted. will work in rest of world.
lol i wont a motherboard than isnt blocked in the uk money waiting for the right part : help to ease the pain of been ripper of if i can get one
ill give up to 70 pouns for a fuklly working unlocked motherboard pm me if you have one for the xda ii
XDA2 Mboard
Ive got a damaged XDA2 that I have driven over with a go-kart. I am just waiting for my insurers to send me a cheque for a new one before I release this one. It still can receive incomine calls and make all the beeps and tones. The screen and case is knackered. As soon as its avail I will post it here!!
I am sorry but the insurance company have kept it.
Go kart? what the sausage where u doing? I've 'ahem' had my xda stolen BUT I Hear from visions i have in my dreams that its NOT been barred :lol: ah well £220 in da bag :lol:
all reported stolen phones are blocked eventually, its just a matter of time usually.
Here's Hopin and will post news
Hello,
I ordered a new full set housing for my Cingular 8125 and it should come in the next week or two. When I get it, whats the best way to remove the original housing?
I have absoluteley no Idea how to change the housing, but don't forget to make pictures while you change.
Thanks,
Andre
Where did you get the new housing and is it different from the original one?
GSXR_6 said:
Where did you get the new housing and is it different from the original one?
Click to expand...
Click to collapse
The 8125 wizard casing is all over ebay but some sellers charge upto $90 for it! You should find dissassembly instructions in the service manual on the FTP site. I have the MDA vario wizard casing ( no stubby aeriel ) listed on ebay under id fluffcat1.
Richard
I too would like to change my 8125 housing. I dropped mine the day after I bought it. I think the stock case was my problem. I hate tucking it in and out of that thing. I have another one coming and want to get another housing.
GSXR_6:
Where can I locate the FTP site. Sorry, I'm new and this is my first post.
I also thought of reworking the color of the housing once the warranty is passed.
Here we go, 3rd attempt (having issues with attaching file.)
HTC Wizard WIZA200 housing with MDA T-MOBILE written on bottom left and right:
Ebay Item Number 130005148788
2 more housings (almost double the price of previous) with T-MOBILE written on bottom center:
Ebay Item Number 9733402561
Ebay Item Number 9141941613
And the attached service manual is the one from the FTP just renamed from Prodigy to Wiard so i could locate it easier on my pc.
Also when disassembling your device watch out for the clips, i've broken a total of like 4 or 5 on my device, although when all put back together it is good as new.
ok, stupid thing doesn't want to attach.go to the Wiki of this site and theres an ftp tutorial of how to get to it.
Can someone please link me to the ftp page where I can download the instructions on how to replace my wizard's housing? I can't find it on the ftp site.
fone_fanatic said:
Here we go, 3rd attempt (having issues with attaching file.)
HTC Wizard WIZA200 housing with MDA T-MOBILE written on bottom left and right:
Ebay Item Number 130005148788
Click to expand...
Click to collapse
That's my auction
They are both original BTW, mine are t-mobile UK 'MDA vario' cases and Che_sir's are US spec - the only difference being the placing of the logos.
I only have limited quantities ( 2 left for now) and che_sir seems to have loads of 'em.
Che_sir also has digitisers and other parts that I simply cannot get hold of :-(
But I'm cheaper
Richard
HAHA, I think i messaged you on ebay asking about other parts for the wizard. Well i might have to buy one of the cases, depending on the damaged wizard i just bought on ebay for parts. We'll see.
Cingular 8125 & T-Mobile MDA
Even though these 2 are the varient from Wizard, but is the housing interchangable? What I mean is buying a Cingular housing for T-Mobile MDA. Is there a good place to buy T-Mobile MDA housing other than ebay? Thanks!! 8)
Check the FTP.
jetfxr27 said:
PM me. I have the HTC Wizard service manual .pdf. Perfect details.
Click to expand...
Click to collapse
It's also in the FTP or at least was - thats where most people got it from :wink:
Richard
how to remove mda/8125 cover
Guys,
if you're still interested in "how to open the mda apart & change the cover" then tell me and I'll try my best to explain it.
it's a long story.
Tall_Man said:
Guys,
if you're still interested in "how to open the mda apart & change the cover" then tell me and I'll try my best to explain it.
it's a long story.
Click to expand...
Click to collapse
Im so interested to know how .. and if you do have pictures then you saved my life if not atleast you helped me and guided me (thanks in advance).
if you do have a pdf file or anything like other members said send it to my email address if you dont mind.
please reply me back as soon as possible
my email [email protected]
Disassembly of the 8125 (Dopod 838 case) is a little bit different from the Tmobile mda (Qtek 9100) casing. I still haven't found instructions for the 8125 but for the mda, its on the ftp site.
clemsyn said:
Disassembly of the 8125 (Dopod 838 case) is a little bit different from the Tmobile mda (Qtek 9100) casing. I still haven't found instructions for the 8125 but for the mda, its on the ftp site.
Click to expand...
Click to collapse
Sorry for bumping up an old thread but anybody ever find a manual or figure out how to do it? Debating whether or not to get a new housing or purchase a clear case and paint it...
look down
bbobeckyj said:
look down
Click to expand...
Click to collapse
That's the service manual for the Wiza200... we're looking for the service manual for the Wiza100...
Disassembling is different between the two models...
Tsuioku said:
That's the service Wimanual for the Wiza200... we're looking for the service manual for the za100...
Disassembling is different between the two models...
Click to expand...
Click to collapse
i didn't realize the that the 8125 was the wiza 100 (and it looks imo)
how different can it be, is it not just the shape of the housing, meaning the clips and principles must be same/similar
anyway here is another guide to disassembly (actually the stylus fix) still of the wiza200 but the pictures may be clearer if it may help
vlestat123 said:
Im so interested to know how .. and if you do have pictures then you saved my life if not atleast you helped me and guided me (thanks in advance).
if you do have a pdf file or anything like other members said send it to my email address if you dont mind.
please reply me back as soon as possible
my email [email protected]
Click to expand...
Click to collapse
X2 !
Can you send me?
my email: [email protected]
thanks!
In case anyone was wondering... the cost quoted to me by PocketPCTechs to replace the system board on a bricked JASJAM is $590 USD, plus $60 labor.
Yeah. So I'm having them send it back.
There is also a shortage of the JASJAM/TyTN/Hermes system boards. They've had it a month, and a lot has happened in these forums since then, including some stuff that looks like I'll be able to unbrick it myself... maybe. Hopefully they didn't mess it up any worse (when I sent it, I could still get into the OS).
Unfortunately, when I managed to screw mine up, none of these recent cool programs were out -- and I had to go on a business trip in a week, so I figured I'd send it to the warranty provider and hope they could figure out how to get the radio working again.
How did you brick it?? also what was it doing??
$590+$60 labor? You can get a brand new Softbank X01HT on EBay for less than that.
I had PocketPCTechs replace the LCD on my old XDA IIs. When it came back from PPCT, there was an annoying hum in the earpiece whenever I used the phone. Made the IIs pretty much useless.
IMEI CHECK fixed mine for $40 US. plus shipping....No GSM type brick
Fourgig said:
$590+$60 labor? You can get a brand new Softbank X01HT on EBay for less than that.
I had PocketPCTechs replace the LCD on my old XDA IIs. When it came back from PPCT, there was an annoying hum in the earpiece whenever I used the phone. Made the IIs pretty much useless.
Click to expand...
Click to collapse
Yeah, really. I got a TyTN on eBay from Expansys' open box deals they have there every once in a while for less than that.
My battery cover top edge broke off after just two months of use. Have been searching but can't find replacement. TMobile UK version is different from Original HTC. Any help please.
joe mboule said:
My battery cover top edge broke off after just two months of use. Have been searching but can't find replacement. TMobile UK version is different from Original HTC. Any help please.
Click to expand...
Click to collapse
Your model is a T-mobile MDA Compact V.
And it didn't take a lot of effort to google your answer!!!!!!!
http://cgi.ebay.co.uk/OEM-T-MOBILE-...emQQimsxq20091204?IMSfp=TL0912042310002r21789
Thanks for the effort.. I have seen that on ebay already. I need a battery cover not full housing.
joe mboule said:
Thanks for the effort.. I have seen that on ebay already. I need a battery cover not full housing.
Click to expand...
Click to collapse
Yes I knew that, but, service parts for case moldings come as a complete set so you might be stuck with having to purchase the lot.
If you did, I'm sure someone else would want the other pieces so you could defray the cost.
this time the gorilla glass survived but the lcd didnt so i would like to know where i can purchase a cheap replacement lcd , so i can replace it and finally get rid of this phone, looking back at it really has brought me nothing but trouble
expensive replacement parts , no / few updates , broken internal memory , ***** support from the manufacturer.
anybody that knows trusted ebay sellers with replacement screens , please let me know
still glowing
http://www.ebay.com/itm/New-LCD-Scr...ultDomain_0&hash=item1e6bff7a6c#ht_2222wt_952
I've installed this about a year ago and its still glowing..lol
I live in holland but nowhere in the ad does it state that they ship this product to my country let alone europe
I have a silicon defender on my streak, i have dropt it on the concrete 3 times and i lost it one time but i manage to get it back, and the screen is ok. Do you have a silicon defender? I thinc this is what saved the streak from broken screen.
simonbuschers said:
I live in holland but nowhere in the ad does it state that they ship this product to my country let alone europe
Click to expand...
Click to collapse
If you search around both here and at
http://android.modaco.com/forum/436-dell-streak-5-streakmodacocom/
I am sure you will find what you are looking for.
i have bought a samsung galaxy s2
so the the Dell Streak is now for sale if anybody is still interested
greetings