tomtom is the only thing stopping me for to go to magneto
i tried it for a while its nice but i need my tomtom
if you know a way for using it ?
please no other soft sugestions because for the moment
my budget is to low for buying something new
TomTom 4.40 is working perfect under WM 5
TomTom3 + Magneto
Hi,
when i try to install TT4.4 the installer crashes!
What can i do about that?
best regards!
Re: TomTom3 + Magneto
Dodger said:
Hi,
when i try to install TT4.4 the installer crashes!
What can i do about that?
best regards!
Click to expand...
Click to collapse
I was also having the same trouble with the installer. Setup.exe kept on crashing. So I resorted to installing the program off the pda.
What you need to do is copy the following files to the pda:
wzd.cab
voice.cab
ttn.cab
gps.cab
Then run each one off the pda and the program should then be installed.
To install the maps just go through the setup to install it onto the storage card.
Oh and if you encounter the backlight problem whilst running Tomtom then you will need to press the "Red Disconnect Call Button" so it can be minimized, you will then need to go into the backlight settings and readjust them accordingly.
Good Luck!
when instal 4.40 i wont take my key
any suggestions ?
yeah, you could buy it instead.
any solution for backlight problem with tomtom 4.40 ?
Problem of backlight
Explore Cd Tomtom 4.40 to go in the folder voice then to take the files voice04.cab and voice05.cab (are the English voices UK) Initially to put it to Program Files for example then to launch the cab since to this folder (Program Files) in your pocket PC
Voice11 and Voices12 (are the french voices)
This procedure corrects the problem of backlight
what do you mean ?
if you install a voice the backlight problem is gone ?
In my case that corrected the problem
I had this problem of backlight
During installation of files wzd.cab ttn.cab gps.cab
and for my part after to have installed the file voice 11 and Voice 12 .cab (women and men french voices) the backlight error disappeared
That was the good solution in my case
The backlight is automatically returned and work good after voice.cab installation
So I suppose that the 4 cab files describes above must be all present so that tomtom 4.40 run correctly
But it's not the same problem for everyone
Dutch Voice Cab files
Hi everone,
Does anybody knows the numbers of the dutch voice.cabs.
:?:
Greeting from holland
Re: Dutch Voice Cab files
[email protected] said:
Hi everone,
Does anybody knows the numbers of the dutch voice.cabs.
:?:
Click to expand...
Click to collapse
can someone upload one ? or a download link :roll:
TomTom 4.4 filestructure
Hi,
First: thanks Nightspider and Dherrero for your tips!
it's hard working, but thanks to your tips TomTom 4.4 is beginning to work
on my XDAII.
I had to put the Benelux.CAB on the Storagecard. Only then it would install.
But I've ran into another problem, it says now "no maps found"
I suspect this have to do with the name and/or the place where you put
the directory with the maps. Can anyone who has a working TomTom 4.4
tell me the exact names of the directory, where the are and what files are in them?
TIA
Re: Dutch Voice Cab files
Hi Everyone,
When you want Dutch language you need to install the following cabs
voice14.cab = "Bram" a male voice
voice15.cab = "Eva" a female voice
voice16.cab = "Nora" i think (not tested)
Now the problem is where to put the Benelux map.
Greetings [email protected]
TomTom 4 Benelux map
I've found it!
Put the Beneluxmap in \Storage Card\.
During executing Beneluc.cab it was stored on
\Storage Card\My Documents\Benelux.
So you have to put the Benelux map in the root of Storage card!
TomTom 4 activation
Damn, now the bloody thing is asking for the activationcode.
Anyone?
TomTom 4 activation
Thanks for the solution.
I installed the map with a cardreader.
Works as wel
But i get the same activation problem
TomTom 4.40
Sorry,but 4.40 tom tom italian language with wm2005 blacklight doesn't work anyway
I have the same problem like Venom...
We need same help!!
TomTom 4.40
Same problem with the Dutch Language.
Pressing the hangup button and then go to the power settings to chance the backlight, solves the problem for the time being.
But i prefer a solution that works ever time.
Any can help us
Once installed bttols (for handfree profile) I lost connection between xda2 and gps (Dconnex DC-230); no problem between this bt gps and its sw on pda (gps viewer on com5, br 9600). Nothing happened when I tried to up/downgrade TT gps software(3.07; 2.07) nor with widcomm stack :idea: . I tried also to uninstall bttools without success. The only way to run properly ttn3 is hard reset and re-install ttn software alone; but when I restore (using spritebackup, including registry), ttn3 freeze on start and a message advice that it cannot laun :idea: ch gps control panel (to select the properly gps engine), so I need soft reset to restart. In the registry (I use PHM registry) the tt gps engine is set on com1 (by default, I think it's the wired model).How can I solve this trouble? I wouldn't manually re-install the several softwares I'm using for about 1 year.Thanks in advance to everyone, expecially developers, able to help me.
Cor
When you installed bttools did you remove any existing bluetooth devices from the bonding? You should remove the gps, reset then rebond gps. Try choosing tomtom wireless gps in top box and gps on bt in lower box if the com5 doesnt work. Are you sure about the 9600 setting, if not try 4800.
I've done all these steps I think properly. But now cannot access tt gps control panel (even starting from wizard) to select the gps device (two messages: "cannot launch gps control panel" or "no gps engine please reinstall", even if tomtomgps.exe and ttgpseng.exe are in windows directory. Work properly only after hard reset.
Should search for gps cabs in installation CD?
Something happened to my mda2 (rom ITA 1.72) installing some sw (bttools, pzp,etc).
Now TTN 3.01 freeze on start needing soft reset to restart pda.
I tried to upgrade to 3.07 without success. I can run navigator software (map planning) only if in registry (HKLM) tomtom gps folder is removed; obviousely this way there is no bond between pda and gps. A message appear trying to choose for the bt gps I owe: "GPS control panel can not be launch".
Someone can help me to manually install in right folder files to launch the panel (from installation CD or downloading from the web or creating working registry folder)?
You can see picture of ttgps control panel on http://support-uk.tomtom.com/cgibin...admin=&p_li=&p_faqid=104&p_created=1105411260
(I'm not able to add picture in this body message from pda; please someone add to this topic)
Useful help highly appreciated.
Cor
Something happened to my mda2 (rom ITA 1.72) installing some sw (bttools, pzp,etc).
Now TTN 3.01 freeze on start needing soft reset to restart pda.
I tried to upgrade to 3.07 without success. I can run navigator software (map planning) only if in registry (HKLM) tomtom gps folder is removed; obviousely this way there is no bond between pda and gps. A message appear trying to choose for the bt gps I owe: "GPS control panel can not be launch".
Someone can help me to manually install in right folder files to launch the panel (from installation CD or downloading from the web or creating working registry folder)?
You can see picture of ttgps control panel on http://support-uk.tomtom.com/cgibin...admin=&p_li=&p_faqid=104&p_created=1105411260
(I'm not able to add picture in this body message from pda; please someone add to this topic)
Useful help highly appreciated.
Cor
Is there a good Samaritan out there who can explain to me exactly how the program is installed and how does one go about editing the Registry of the TyTN. I have bought Nokia HS-12W BT stereo phones and have added in Sleuth's anti-skip modification. All works well except that I do not get stereo. I must modify the Registry according to Sleuth's working model, and need to do the Registry mods.
Please help!
I am sure there are other newbie's who are also keen to learn new tricks.
Which problem are you exactly having? Just install the cab file, run the program and browse the registry to the place you want to modify, add or delete a key. Tap on the key or screen to do this.
You have to copy the cab file to your Hermes first. When I install cabs, I either send them to myself as email attachments or I use activesync explorer mode. Alternatively, if you can find the site using Pocket Internet Explorer (PIE) then you can download the cab directly. Once the cab is on your Hermes, then tap to install.
There is an alternative way to install apps on WM and that's with a windows based installer. If the file isn't a cab, then you'll need to connect up your hermes with its USB cable, wait for activesync to connect then run the installer on your PC. The installer itself will send the cab file over for immediate installation.
If you're familiar with the Windows registry you'll have no problems understanding the WM registry. When you change a value, make sure you power off with the power button to reset & make the change active, otherwise your registry setting might not "stick". Some registry values take effect immediately but I always power cycle after making a change just to be sure.
Installing PHMRegEdit
Hi
Could you please attache the CAB file.
I have load the file and the file is PHMRegEdit.msi
Thanks
I was wondering "which" .cab to copy over for the AT&T Tilt 8925. I did try the Stngr_ARM and it did install. However, I can not expand the registery top folders or export the registery.
Thank you in advance
OK, figured it out.
regedit.Mrln_ARM
did the trick