Help anyone....
I boought this imate pda2k about 4 months ago and i dropped it and pretty badly scratched it up... my screeen section is loose now and slides down when i slide it up. and as aresult has also scraped the sides of the keypad...
if there is any way to get a new faceplat pleas let me know
anyone ?
please
help
I just dropped mine this morning and I would like a new case as well. The supplied siemens case sucks! It was in it's case when it fell, and managed to dent the corner pretty bad. That case has no corner protection.
if you contact the Clubimate.com service center in your area they will replace the casing, with a battery for roughly US$83.00 I called because my keyboard is a little loose, as alot of users get and they said they could replace the outside casing, and a new battery for that amount.
Related
My xda's aerial came off in my hand the other day, while I was removing the stylus. I thought I'd fixed it back on, but I can't get a phone signal now (I live in a good reception area).
Anybody know how to fix these? There only seems to be one loose part inside (a small spring).
Thanks in advance
Ian.
I managed to break mine also, can you send me a picture of what you found under the black plastic cap? the address is [email protected].
Thanks
Hi !
Please send me foto also.
[email protected]
THX
You should have a small conical spring attached to the circular brass post under the plastic aerial/stylus appatuture cover (thin end up!)
Rick,
Thanks, that's what I have - I was worried that something else had popped out. I'm now led to believe that the spring is the aerial? Hi-tech components....
A secondary question. As the black plastic cover has worked loose, I plan to super-glue it to the body. Anyone think this is a bad idea?
Ian.
I had the same problem with mine and also lost the spring. A cut down spring from a biro worked quite well till I had a chance to get it repaired on warranty
Antenna super glue
SuperGlue seems the only way to
make sure it doesn't come off again.
Best regards,
Murk
Hi,
anyone has battery & back plastic case for Siemens SX66 model?
thanks.
yes i do, quite a few other parts too, camera speaker screen etc
scousemartin
Would you have a d-pad as it seems that they get worn on the inside.
Taking it apart and removing the dust has not helped.
However if I look at the back ruber part of the d-pad I notice that it has a raised button were each of the contacts are. My down one is now close to being flat. A dab of glue did not stick to the ruber as it fell of when I was putting it back together again.
To make it worse for me is the fact I was given a replacement BA as it was no longer needed and that too has the same problem (which would esplain why I got it for free in the first place.
I dropped my phone today and I lost the little black "dot" on upper left of the back door (see picture).
Does anybody know if this piece protects the phone.Should I buy a new cover or can I just leave it that way?
Thanks
It's the cover for the connector that will connect to a car antenna. I don't think it's a big deal.
Cool, no worried then. Thanks a lot.
mine didn't have that cover when i got it wow i can hook this up to a car, learn something new every day i love this site
no this really doesnt matter but if u want and new one u can buy a new back piece on ebay for about 4 dollars
nice
lol...lol.nice
somebody get rid of this guy's post
I've just bought an OEM battery cover off eBay recently to replace mine that has the Telstra logo on it. The battery cover seemed fine and solid, and it looked and felt alot like the original one.
But the only problem is that it has no grill/metal netting on the hole for the speaker. Any idea how I can come about this? Or how I can remove the grill from the original cover and glue it back on the replacement?
Thanks in advance.!
I just bought a new back cover too, it is impossible to tell the difference! $24 US delivered, HTC want US$100 delivered
The speaker mesh can be very easily pushed out from the opposite side, only lite adhesive holds it in place.
It is the volume key that proves a slight challange but even that is no big deal, just a very fine flat head screw driver to pry out plastic welds by inserting the fine screw driver as close to each weld as possible so as not to break the delicate plastic.
where dit u order them??
I got mine form ebay
However someone needs to design one with these features:
Piano black style (same as phone)
Alternate colours
Perfectly aligned reset hole
Small closable door to remove SD Card
Tighter fit to prevent the horrible crackling noises (especially around the volume keys)
This would sell like hot cakes!
I just received mine from MSG Distributors NY and it did cost around $30 delivered but what a huge difference over the Telus stock cover. This one does include the mesh grill. I ordered this due to the camera bezel being scratched on my used Telus 8285.
It does NOT have the squeaks the original cover had, it's much tighter fit and sturdier too.
RAP5 said:
I just received mine from MSG Distributors NY and it did cost around $30 delivered but what a huge difference over the Telus stock cover. This one does include the mesh grill. I ordered this due to the camera bezel being scratched on my used Telus 8285.
It does NOT have the squeaks the original cover had, it's much tighter fit and sturdier too.
Click to expand...
Click to collapse
Thanks all. I peeled the speaker mesh with a pocket knife.
The replacement ones look and feel better, so definitely not worth a 100 bucks on an original one. Too bad the replacement one doesn't come with volume rockers as well. So again, I had to carefully take the original one off.
P/S - Bought mine from eBay..
Hi everbody!
Is your back battery cover getting ugly by putting your HD2 in your pocket?
I get a lots of spots on the metal plate.. more than ever on an other phone... I was wondering who has the same experiences....
addie said:
Hi everbody!
Is your back battery cover getting ugly by putting your HD2 in your pocket?
I get a lots of spots on the metal plate.. more than ever on an other phone... I was wondering who has the same experiences....
Click to expand...
Click to collapse
hey waarom gebruik je het hoesje niet?? zo'n dure telefoon zet je niet gewoon los in je zak.. als je het kwijt bent zoek dan naar een vervanger..
translation:
hey why don't you use the pouch? you don't put such an expensive device in your pocket like that.. if you lost it just search for a replacement..
I still dont have any scratches on my HD2 bought it back in December..
young blade said:
hey why don't you use the pouch? you don't put such an expensive device in your pocket like that..
Click to expand...
Click to collapse
Just as much as you don't put a device you use so much in a pouch... I'd get mad if I had to take it out of and put it back in a pouch every 2 minutes, not mentioning the extra thickness...
It's meant to be used, I like to keep my device neat but still favor useability. No pouch, no screen protector, I'm jsut careful when I use it, then it's just normal wear to me. I wouldn't want to be annoyed EVERY time I use it just to avoid a little scratch or 2. The back cover is the least of my worries, screen is the important bit.
Or you can leave your HD2 in its original box and at home, so that it never gets flawed
And yes, the back cover getting ugly is common.
Get yourself a case
I got myself a rubber case of ebay, very cheap - 3£ -from Hong Kong this should sort everything out. Even when you drop it there is more chances your HD2 will survive. I wouldn't worry bout the screen it quite scratch resistant
I use my pouch all the time, never put it straight into my pocket, yet I have small blotches on it, on one the protective coating has even come off. Can't think of anything I have done to cause it...
Cleaning your phone
addie said:
Hi everbody!
Is your back battery cover getting ugly by putting your HD2 in your pocket?
I get a lots of spots on the metal plate.. more than ever on an other phone... I was wondering who has the same experiences....
Click to expand...
Click to collapse
Why don't you give it a wipe with what we here in Scotland call a magic sponge.
a Mr Muscle product I think. I usally buy them unbranded at a local discount store.
I have exactly the same problem, I hate fumbling around with a case every time I want to skip a track and because of this my battery cover has the paint chipped off. I recently bought a rubber case in a kit from mobilefun.
I have the cover issues and this is what i am going to do:
polish the cover as done in one of the threads here and get another cover off eBay and switch between the two.
buy a silicon rubber back cover and you will have pleasure using and protecting your HD2
Sorry people nothings going to cure the damage on my cover. Anybody see what HTC charge for a new battery cover. Like reaching for the soap in prison!
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=195872
Ive had mine since november and ive never used a case, my battery cover is almost flawless there are a few tiny scratches that are barely noticeable.....
compared to my old N95 this thing is invincible.....
I've had mine since march (US Tmobile release), and I've used no cover or screen protector and there's not a scratch anywhere on the phone, including screen and battery plate cover.
I have bought a transparent cover for all the parts of the phone..called if i remember well "Clear Armor" and ever since i have no problem/fear of scratches. There are no issues regarding the touchscreen sensitivity or so, besides on the box is NOT written made in China!!
ungureanuc said:
I have bought a transparent cover for all the parts of the phone..called if i remember well "Clear Armor" and ever since i have no problem/fear of scratches. There are no issues regarding the touchscreen sensitivity or so, besides on the box is NOT written made in China!!
Click to expand...
Click to collapse
I still want to get that "Clear Armor".
Tho for now I dont have any damages on my phone. I just use the poutch which was included.
Skipping numbers from music player? The shipped earphones had a remote control part which works very well, tho I bought a plugin earphone remote so I can use my Synhaiser earphone and skip numbers while its in the poutch.. expensive but the sound quality is so good.
Photo?!
Hey addie, show us a photo of your ugly battery cover
Here's the picture http://twitpic.com/2so8jd
Cheeeeze OP the cover looks like you busted a nut over it, then dropped it in the toilet at the end