Hello all,
I am just wondering if anyone knows of good cases for either the 2200/2400 extended batteries.. preferably one that includes pockets for credit card/cash too.. carrying a wallet around is kinda troublesome! thanks
Case?
I squeezed the 2s with a 2200amp battery into a book open type PDair leather case.
It's not completely fitted but better than others.
Cheers,
Sena and EB cases will fit
sena fits well just that it doesnt sit in the cradle too wel..
i actually did manage the squeeze teh 2400 into a brando hard case... can barely move the keyboard though... and the touch screen functionality is almost zero because of the tight fit.. haha not very practical at all.
the eb slipper case http://www.ebcases.com/Detail.bok?no=3301 looks quite good because it actually covers the bottom of the casing.
I used my XDA 1 with the issue O2 case and the thing I notice between that case and the likes of the nice brando rigid casing is that there are still quite a few bits of the unit that are exposed so if you drop it, bits of your PDA will still get damaged if it happens to fall wrong.
I know, it happened to me on more than one occasion.
from what I can see on the meagre picture on the EB case site, the bottom and sides are covered and the belt clip looks quite nice as well. no accidental clip releases there I think.
could someone tell me if the EB case has the camera button exposed for use, and is there a hole for the camera on this case? it's a bit ambiguous.
Related
Anyone have any leads on sources of cases to fit the Wizard? The one that comes with the K-Jam look decent of first view, but since I'll probably want something nicer I figured I would get this thread started.
Robert Harrold
Houston, TX (Ordered my K-Jam through MMB... hope to have it next Friday!)
Well, an update on this, I picked up a Targus Small Camera case Model DCCS00 and while it is a bit loose front to back it fits nicely side to side. A bit bulky but functional and It is easy to insert/remove the device. Also it securely attaches to my belt so I don't have to worry about scraping it off on my office chair. It'll do until someone releases a 'made for' case.
Robert Harrold
Houston, TX
any news with more cases to buy for the k-jam??
anyone?
I ordered and got this case for my wizard after it was recommended on another board. The guy said he found it at a mall in NY at a mobile phone accessory cart. I like it a lot. Fits perfect. The belt clip (although it isnt visible) has a built in swivel so you can wear it vertical / horizontal / or on an angle. I wear it at an angle and its so easy to place in pouch and pull out. I can also charge with the wizard in the case becuase it has a small opening in the bottom.
http://www.shopcell.com/cell-phones/cellular-accessories/HANDSPRING%20PALMONE/Treo$650/Leather-Case-Treo-650-600-Vertical-Pouch-Black-Leather/TREO650LP.html
I just ordered an OEM blackberry 71xx slip case belt clip and Tre 6xx slip case from ebay.
http://www.shopblackberry.com/_blac...gory=BlackBerry+7100t&pid=F2222WBW5TARNDHUC9F
I like to concept of slip case rather than attaching something on my belt.
I'll keep everyone posted here...
Review: PDair booktype leather case
I did a review of the PDair booktype leather case here:
http://www.onppc.com/forum/article_read.asp?id=12
Cheers, Sabesh.
I wonder if the flip type PDAir case uses the same technique to keep the k-jam in place.
I prefer the not so bulky cases. using the case that came with Treo 600 atm and it fits perfectly. slightly tight but it fits in my jacket pocket a lot better than any other cases that I've tried.
I have decided to give BB 71xx pouch a try. I had to stretch it a bit in order to get my qtek a nice fitting.
http://natt108.net/qtek/
I am also in a process of streching my treo 600 slip case with a pair of socks and will post some pictures tonight when I get home.
Does anyone have an IPOd 2/3rd Gen slip case? Can you please try and see if it'll fits nicely with your Wizard?
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
For those using the WIZA100 variant of the Wizard...
--
Got this case this AM. It is for the dopod 838 or VPA Compact II. So far so good my only gripe is that the case doesn't allow access to the messaging and ie buttons [when closed] and it is kinda slippery [maybe use it in tandem with a neck strap or handstrap]
--
They have one for the WIZA200 models as well
http://www.pdair.com/scripts/main/viewpda.php?pdaid=194&catid=9
Hi guys
Just received my ali PDair case - ordered Thurs night arrived this morning, outstanding service!! A great case too!!
Simon
I heard something about Aluminium cases and low gsm signal..
Are you having that kind of experience on your ppc ;
I currently have the Htc Wizard/ qtek 9100 and i am looking for a case.
Probably i'll go for the leather one.
no signal problems for me so far been using it for almost a week now... of course signal strength is also determined by your network coverage as well not only your device
Hi
Just checked on the signal stregth, one room in my house has a very weak GSM signal for Vodaphone and when using the PDair case it drops by 1 bar.
Must be shielding
Simon
Plastic screen cover
Does the aluminum case by PDair have a plastic screen cover to protect the screen like the Armor Case by Boxwave (www.boxwave.com)?
yep they have hard plastic screen
PDAir Case
Sabesh mentioned velcro in his review of the PDAir case. Does that mean there is some 'sticky pad attachment' to be done. The case says it closes with magnets, so I can't figure out where the velcro comes in unless it's to secure the handset. if that means sticking something on to the handset then I'm not so keen. i need to be able to get the handset out easily to fit in my car kit.
TIA, Davebo.
Hi I currently have the Krusell Cabriolet for my 8125, which makes using it like a phone very simple. However, pushing it out to use the keyboard without opening a bunch of progams because I pushed buttons in the process makes this a little suboptimal. I don't like the book cases or flip cases because I want my screen uncovered for my own convenience (I have screen protector film and I'm satisfied with that level of protection).
After doing some research, I like the simple styling of the crystal clear case for the 8125 (see links below). Because it snaps on individually on both sides, there is no obstruction to opening the keyboard, and there is no flap over the screen. It is not as elegant as a leather case and not as bulky or heavy as an aluminum case.
My only issue is that it doesn't appear that it is sold with a belt clip. From the photos, it appears that there is an opening to attach a belt clip. I checked the Boxwave site and though they sell clear cases with swivel belt clips on other models, they don't do with some, including this one.
So finally...my question is, does anyone know whether I would be able to purchase a belt clip separately or (1) does this particular case not support a belt clip, (2) it would not be advisable to use with a belt clip even if it was possible, due to design issues (e.g., snap on case not that durable or snug a fit and phone might pop off, etc.)?
http://cgi.ebay.com/Hard-clear-crys...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://www.boxwave.com/products/activecase/active-case-htc-wizard-cingular-8125_1160.htm
If you are still looking, Check this:
http://www.daydeal.com/home.php?cat=2262
fresh123breeze said:
If you are still looking, Check this:
http://www.daydeal.com/home.php?cat=2262
Click to expand...
Click to collapse
Do these plastic cases cover the screen? It seems they do not, but it is not obvious from the pictures.
They dont' protect the screen. I have one for my mda, and left it on there for like 5 mins. It makes an already bulky phone bulkier. Plus it just feels cheap, especially when you're sliding the keyboard open and shut. But I got it for $10 shipped, so whaddya gonna do? Check ebay for cheaper prices.
(This was with the MDA case...but maybe the 8125 is made with some true craftsmanship so as to avoid these problems )
Thanks just what I needed
Just wanted to say thanks I have been looking for a case like this.
Take care
Cases don't fit 8125
Regarding http://www.daydeal.com/home.php?cat=2262, those cases fit MDAs but will not fit on an 8125. Although both have basically the same form factor, there are enough differences in the edges of the phones and mail/IE button locations that the case will not fit. I learned from experience.
Hi all
I haven't found any topic about this case, so here it is:
I recently bought a Tuff-Luv Executive leather pouch for my HTC HD.
http://www.amazon.fr/Tuff-Luv-Execu...1?ie=UTF8&s=electronics&qid=1235746989&sr=8-1
It is quite good, the phone fits very well in it (the camera hole is a bit too low but it is ok anyway). the phone can still be easily to removed from the case.
And it is one of the few leather cases for that phone, that has a hatch that opens to the lower part of the phone (sorry, can't find the words in English, you can see picture) so this is appreciable.
everything is easy to access: stylus, usb port even when the case is closed , volume control, audio jack. Plus it is less expensive than Noreve and Proporta cases (probably not the same durability, but this I can only tell after a while, as it seems to carry on well for now)
So I would gladly recommend it. Anyone else has this case ?
Hope it works out for you. Looks like a pretty well made case.
I'm still trying a few different cases for my HD.
First was the PDA Air book style but it didn't take too long for me to get concerned the two plastic arms that holds the unit in the case are not that secure. The unit can slide and as it is also a belt clip case last thing I wanted was my new shiny HD sliding out and bouncing on the pavement. :-(
Currently have a two piece case of eBay described as "black rubber". Really more of a plastic than rubber and it will do for the short term as only a few dollars.
Today I ordered a Krusell Orbit case. Has the removable flap which covers the screen. I am hoping that with the main section of the case still on the unit it will still fit in the cradle I have. (My cradle has a bit of space around the unit which I hope will accommodate the case)
Your case look good too but the flap attached to the rest of the case at the base so wouldn't allow the unit to sit in the cradle.
Did anybody here buy the holster from the tmobile store that they have that the g1 supposedbly fits in?
its around 24$ i think.
It was closed by sort of 2 clip things.
i'm primarily looking for a horizntal belt holster...
any ideas?
i have the body glove, it is in that price range. love it if thats what your asking
Theres a magnetic one, that fits a sidekick, it's what i use.
Body Glove
I have the Body Glove also and it's great. Perfect for the person (like me) who is rough on phones. And it looks good too.
I purchased the crystal gel case from boxwave It covers the G1 completely and offers excellent protection for when you drop the phone. I also bought the niteize side belt case. It clips on your belt and the elastic allows it to expand enough for the phone with the gel case on it to fit.This case closes with velcro so there are no magnets to create problems.
I got the one from the T-Mobile store last week but it's not the up and down one. But I have to admit was worth the money (even though I didn't end up paying for it love the gf) The one I got sits sideways but very nice and fits the phone well. Was a little snug at first but about 2 days later the phone just slides in to the case very nice.
Chedderknight said:
Theres a magnetic one, that fits a sidekick, it's what i use.
Click to expand...
Click to collapse
I talked to a TMO rep at the store and said no accessories for G1 should have any magnets due to the compass feature. He advised that if you are going to use an aftermarket case, to make sure it doesn't have any magnets. The case TMO sells are magnet free for the G1.
As for the holster, I have it and though it fits the phone snug, be careful as the screen is facing out so make sure you have a screen protector.
I just bought my G1 last 2 weekends ago with a tmobile store belt clip, fits perfectly, sturdy rotating clip for horizontal or vertical placement, gets annoying having to take it out to text or open keyboard but otherwise perfect...24$
the pleather tmo horizontal case with attached clip. it's soft but not screen friendly soft on the inside so the screen protector is a must. great product though.
One warning. If you have a tendency to forget to snap the buttons, make sure you're using a hard or jelly shell to make the phone fit snugly. the basic stretchy straps on the sides are just barely too long to make the phone 100% secure IMHO without it.
i personally like this one.
http://www.fommy.com/view-full-page.asp?divid=T-Mobile&model=T-Mobile+G1&cat=Cases&skuno=82922
you can use it with the screen either facing out for in for screen protection.
I bought this one by Seidio. I had one just like it for my Blackberry 8820 and loved it. I love this one too.
http://www.g1depot.com/seidio-spring-holster/4A24A4902.htm
Buy a bodyglove that has a belt clip for your g1 phone. You won't need to buy a suction cup or dash holder for your g1.
I clip it to my rear view mirror after pushing back the rear view mirror tab. Then I close the tab. Stays in place and very sturdy. It's even easier to see since it is under the rear view mirror and safer too!
I also can use the belt clip to hang the phone off my laptop. I don't clip it, just use the space between the glove and clip to hang it.
Also, the rubbery glove protects your phone if you drop it.
Getting my TP2 tomorrow, but really wondering about this...
Seeing pictures of the leather 'case' that comes with the TP2 elsewhere than in the US, is it the same case without belt clip in the T-Mo US TP2?
If it is, I want to be ready when I pick up my phone to get a belt clip equipped case as well.
Yeah man... the US tp2 comes with a gay looking leather case that has no belt clip. It looks like you have a man purse imo
yeah a man purse that slides into your pocket
You guys weren't lying -- that thing is pathetic. I don't know what the heck HTC was thinking when they packaged that.
The T-Mobile guy was also full of crap when he said they had one with a belt clip. Looks like I'll be doing some shopping online.
Thanks for the heads up on that one!
yes the cases htc give are always junk. i like the bodyguardz skin cases simply because the phone is already kinda thick and it does protect the phone. kinda of a pain to put on but after my 4th attempt throughout the years i think i did my best on the touch pro 2.
nko, does the screen protector part feel rubbery and make the touch screen a little less sensitive? I know it is like that with the Zagg on my friend's iPhone.
Got this hard thick rubberized case at the tmo store. It comes with a snap in/out belt clip if wanted. Seems to fit tp2 very well, and leaves accessible all need openings.
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
i am still using the case my dash came with for my tp2, it fits.
I just bought me a $5 case with belt clip. I just have to cut a hole for the ear jack. I'm not spending $10+ for a case
freakingwilly said:
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
Click to expand...
Click to collapse
Yeah, I think I'm just gonna use the belt clip case that came with my Hermes. It's just a little longer but it fits for now.
Has anyone installed a full body screen protector like the bodyguardz ones? I saw this one on ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370244520409&ssPageName=STRK:MEWAX:IT
But I bought this for the time being: http://cgi.ebay.com/for-HTC-TOUCH-P...ries?hash=item4399b91c94&_trksid=p3286.c0.m14 (from what I've heard, these pop off easily)
This is a very delicate process for me. It's a balance between too bulky and too little protection. I want it to be able to survive it's first dreaded drop without cracking the case. I may just try to use both of them at the same time. When I'm doing physical work, I'll put the rubber case on, and when I'm at the desk, just have it out with the clear protector. I just wonder if you can clip on the rubber housing over the clear protector. The perfect thing for me would be to just have a rubber skin that slides over the whole body of the phone because I don't slide the keyboard out much anyway. That way it could be protected when I'm on the move and I can easily take it off when not.
I also bought one of those generic belt clip holders for $5: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310161485996&ssPageName=STRK:MEWAX:IT I had one before and their alright. The loops on the back will secure the phone to you if you're moving around but the clip may sag overtime though. I know I'll be replacing it eventually. The HTC OEM cases are much better, but no loops. There's never a perfect solution.
BTW: Does anyone know if the rubber case from the Touch HD will fit?
^^Just ordered one of those this afternoon. Looks similar to one I had before but can't beat $5 and then about $.50 in cashback haha