Where can i find a Ethernet card for my qtek 9090...
I just looked around for one sd card with ethernet adapter, but no luck...
Is there any solution?
Related
I have a microsd card and a microsd adapter however when i insert the adapter with microsd inside into the transformer prime dock, its not recognized. Is the tablet incapable of recognizing a card that's within an adapter? Does it have to be a straight SD card for it to be recognized? Thanks!
czerdrill said:
I have a microsd card and a microsd adapter however when i insert the adapter with microsd inside into the transformer prime dock, its not recognized. Is the tablet incapable of recognizing a card that's within an adapter? Does it have to be a straight SD card for it to be recognized? Thanks!
Click to expand...
Click to collapse
Worked just fine for me....just tested it.
Just plug n play? Weird, tried two different adapters and two different microsds and none worked. Is there a way to force it to search for the card?
EDIT Nevermind worked fine after a restart.
Maybe its wrong format? I now have a 64gb prime because of 2 16gb cards i had lieing around
The adapter is transparent to a computer, both types of cards have the same pinouts. No device out there needs special support for those adapters.
Aye, maybe the adapter is just faulty or has a damaged pin that pisses off the driver.
I've had no problems with any MicroSD, SD, or MicoSD+SD adapter I've tried.
Sent from my Transformer Prime TF201 using Tapatalk
I have searched all over the outside of this tablet to find the microsd card slot.
Do I have to open it up to get to it?
250 GB version does not have microSD slot.
oh no that's some bad news, thanks for the information zando2712
Your storage expansion possibilities are endless with your new device.
There is the USB 3G port to the back and the micro USB host port where a host cable can be connected.
Both of these ports will work with a microSD adapter.
The rear port outputs enough power to work with external drives.
I'm assuming that you wanted a microSD slot to quickly transfer files to your tablet?
Just use an adapter if that's the case.
If I root my flyer to say cyanogen , will I be able to fix the Gps issue and will I finally
Be able to connect a external hard drive or at least a thumb drive?
I have the micro sd to usb female adapter already and tried to connect a fat 32 thumb drive but
Would not work
I'm pretty sure Nokia 7+ supports OTG.
I have an Aukey USB 3.0 A to C adapter into which I've plugged an Anker USB 3. 0 card reader. The phone does not recognise this as storage. Should it and, if so, what am I doing wrong, please?
maybe your reader don't support OTG mode? i have https://www.kingston.com/en/flash/readers/fcr-ml3c and working fine without any settings or 3rd apps...
after put is USB, in status bar i see usb icon, in notification i see "USB Drive" with buttons Explore and Eject, after click on Explore a see files on microSD in USB reader and mp3 from it is played ok...
Card Reader
k3dar7 said:
maybe your reader don't support OTG mode? i have kingston.com/en/flash/readers/fcr-ml3c and working fine without any settings or 3rd apps...
after put is USB, in status bar i see usb icon, in notification i see "USB Drive" with buttons Explore and Eject, after click on Explore a see files on microSD in USB reader and mp3 from it is played ok...
Click to expand...
Click to collapse
Thanks. That's very helpful. How does one establish if a reader supports OTG? I need an SD card reader so can I assume the fcr-mlg4 will also work?
now i noticed, then you write about separate USB-A->C adapter and USB-A card reader... then i think not be problem with card reader (this not need support OTG if used with (right/working) OTG cable/adapter), but with your USB-A->C adapter, maybe not support OTG or is broken... can you try in this adapter put another USB Flash? and put in N7+ (after USB Flash putted to adapter)
k3dar7 said:
now i noticed, then you write about separate USB-A->C adapter and USB-A card reader... then i think not be problem with card reader (this not need support OTG if used with (right/working) OTG cable/adapter), but with your USB-A->C adapter, maybe not support OTG or is broken... can you try in this adapter put another USB Flash? and put in N7+ (after USB Flash putted to adapter)
Click to expand...
Click to collapse
Thanks.
I've tried a different card reader with a micro SD card and a USB memory stick in the Aukey adapter and i am still not getting a response.
andy_48 said:
Thanks.
I've tried a different card reader with a micro SD card and a USB memory stick in the Aukey adapter and i am still not getting a response.
Click to expand...
Click to collapse
then i think aukey adapter not suport OTG and is only for use with PC/Apple with USB-C conector... try buy another adapter, i don't post link to ebay because i don't know if adapter for $1 from china with OTG in description really have OTG support or is mistake/lying... try buy some from your local/country_eshop store with verifing with on vendor site or with shop support that is really with OTG... i see on me country eshop for example "Akasa AK-CBUB25-15BK" and vendor say is have OTG support, but sure you find also another...
edit: sorry i write akasa model with microUSB, this is with USB-C "Akasa AK-CBUB30-15BK"
http://www.akasa.com.tw/search.php?seed=AK-CBUB30-15BK
for this vendor not say OTG support, but have photo with phone/tablet, then i think OTG supported (and in description in me country eshop in description is OTG support)
OTG
Thanks k3dar7.
It had never occurred to me that a USB-C to USB-A adapter wouldn't have OTG support. I've ordered one from Amazon that, hopefully, will do the trick.
Many thanks for your help.
Andy
andy_48 said:
I've ordered one from Amazon that, hopefully, will do the trick.
Click to expand...
Click to collapse
Just received AUKEY USB C Adapter to USB A ( 2 Pack ) with OTG USB Type C Converter https://www.amazon.co.uk/gp/product/B074K38QC7/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 from Amazon and it works perfectly with OTG. I'm now very happy, thanks!
Hi
I want to get my 6T to read SD Cards from a trail cam. I purchased one from UGreen and it has almost no instructions. I can't get it to work. I did put the phone in OTG mode. I had to use an adapter from Micro USB to USB Type C. There is no indication that it is connecting. Any ideas?
If anyone has been able to do this on the 6T, even if it means buying a new adapter, let me know how.
Thanks
John
Do you have OTG storage enabled in system settings?
"OTG storage" is enabled. Are there any other OTG settings that also need to be set?
You need an OTG cable. That should work since that's how I transferred all of my photos from my micro SD card (in a card reader) to my 6T. I doubt directly plugging the card reader via adapter would work.
1. Buy a OTG microSDHC card reader.
2.Check the tipe of the files on card.
The unit is OTG but it has an micro USB fitting and I am using a micro USB to USB Type C adapter. Could that be the problem? I don't see how, the adapter should be straight through. I don't think it is a file issue, the 6T does not even see card. I might just try another reader.
use the app WiFi explorer, and you can transfer anything and everything wirelessly, via wifi..those files on your sd card need to be on another computer or somewhere they can be "seen"..
This one has been working great for me. I've used an older otg micro to A adapter with no problems before though. Could just be a faulty adapter on your end.
Yaotl, I can't figure out anything else but the reader. I think I will give the Anker reader you suggested a try.
Thanks for the help,
John
I purchased another reader. Works perfectly. Thanks for all the help. Especially, Yaotl.