the laterest trad. Chinese ROM is 1.66.06
I am using it now ~
cool!
simplified chinese rom
Hi, there:
I'm a newbie from china mainland, and I'm using a dopod696 which I think is an oemed xda II. the rom information about it like this:
ROM: 1.66.07CHS
ROM date: 02/23/04
Radio: 1.15.00
Protocol: 1337.25
ExtRom: 1.66.225
and its Pocket PC version is 4.20.0(build 13252)
I have these questions: is it running wm2k3 or wm2k3se and how can I tell? is there any newer CHS rom available?(dopod's technical support is very poor.) can I use XDATools to backup its rom? and who actually built these roms? Microsoft or the device manufacturer?
Thanks for your help.
Hi, Zhoudan.
AFAIK.
You have a newest XDAII (Chinese version isn.t ??) with OS Windows Mobile 2003 Service Pack 1.
WM2003SE is Pocket PC version 4.21.
ROM built by Device Manufacturer (Vendor like O2, I-Mate, Qtekk or T-Mobile), sorry i do not know you vendor (Dopod ???), may be they are sub vendor from O2.
Microsoft is support OS only.
Thank's
ajong [/quote]
Thanks a lot ajong,
I noticed some people here are talking about rom version 1.72 which seems to be wm2003se, is there a simplified chinese version available?
zhoudan said:
Thanks a lot ajong,
I noticed some people here are talking about rom version 1.72 which seems to be wm2003se, is there a simplified chinese version available?
Click to expand...
Click to collapse
That's wrong. Until now there is no WM2003 SE available for the XDA II.....
HTH
Stefan
Rom 1.72
WM2003SE is not come out yet, wait untill the end of the year !!.
update to 1.72 rom, you will get WM2003sp2 with benefit increase battery lifetime, bluetooth customization, .....
afaik, not chinese version in 1.72 rom.
i heard O2 will make 1.72 rom which WM2003SE included, but i am not sure :?: :?:
sawed said:
the laterest trad. Chinese ROM is 1.66.06
I am using it now ~
Click to expand...
Click to collapse
I really need this. Could you capture it out and upload for our downloading? Thanks.
Re: 1.66 CHT ROM
Sawed, please share with us la
negatong:
I have got the CHT ROM 1.66 but in SD Image,
in reply I need you to convert to nbf files. Can u
do that
Cheers
AL
alexlay said:
negatong:
I have got the CHT ROM 1.66 but in SD Image,
in reply I need you to convert to nbf files. Can u
do that
Cheers
AL
Click to expand...
Click to collapse
Alex,
Use the attached tool 'ntrw.exe' to extract the ROM image in SD card:
1. Insert the SD card containing the ROM into a card reader
2. If the card reader drive is 'X:\' under your Windows, then run:
ntrw.exe read xda2_166_cht_image.nb1 x:
(where the 'xda2_166_cht_image.nb1' will be filename of the captured ROM, it can be whatever you like)
Then, you can find an extracted ROM file under the working directory.
I have PM you with my email address. Could you please send me the ROM file, please? Or, you might upload it to ftp.xda-developers.com and inform me.
Thanks a lot!
sorry...I already upgraded to se..& didn't backup the old rom
negatong said:
alexlay said:
negatong:
I have got the CHT ROM 1.66 but in SD Image,
in reply I need you to convert to nbf files. Can u
do that
Cheers
AL
Click to expand...
Click to collapse
Alex,
Use the attached tool 'ntrw.exe' to extract the ROM image in SD card:
1. Insert the SD card containing the ROM into a card reader
2. If the card reader drive is 'X:\' under your Windows, then run:
ntrw.exe read xda2_166_cht_image.nb1 x:
(where the 'xda2_166_cht_image.nb1' will be filename of the captured ROM, it can be whatever you like)
Then, you can find an extracted ROM file under the working directory.
I have PM you with my email address. Could you please send me the ROM file, please? Or, you might upload it to ftp.xda-developers.com and inform me.
Thanks a lot!
Click to expand...
Click to collapse
Hi.
I have uploaded into Uploads/CHT166, please help convert to
nbf files.
Cheers
Alex
Alex,
Thanks for your uploaded files VERY MUCH! I have upgraded my XDA II to 1.66 CHT successfully!
The zip file you uploaded is actually the ROM file (I used Hex Editor to open it). You can just rename it to any new name with extension 'nbf'. Then, you can flash it to any XDA II device. (Actually you can directly use that to flash)
For how to flash a XDA II, please refer to:
http://www.wda.com.cn/viewthread.php?tid=108440&extra=page=1&filter=digest
Once again, thank you very much!!
Tong
negatong said:
Alex,
Thanks for your uploaded files VERY MUCH! I have upgraded my XDA II to 1.66 CHT successfully!
The zip file you uploaded is actually the ROM file (I used Hex Editor to open it). You can just rename it to any new name with extension 'nbf'. Then, you can flash it to any XDA II device. (Actually you can directly use that to flash)
For how to flash a XDA II, please refer to:
http://www.wda.com.cn/viewthread.php?tid=108440&extra=page=1&filter=digest
Once again, thank you very much!!
Tong
Click to expand...
Click to collapse
Tong,
I understood, I just need to rename the CEROM to extension with nbf is that right. So what about ExtenRom. It is in zip format. How do I handle?
Cheers
AL
PS: I have tried your link but failure to register. Please advice
You can register the website as free, then you can see those upgrade steps. Actually, flashing with Ext ROM is much easier, and is also included in the thread.
Hope that may help.
i have been download the cht 1.66, can somebody tell me the simple way to flash it, i have already downgrade from 2.06www to 1.52cht, many thx!!
negatong said:
You can register the website as free, then you can see those upgrade steps. Actually, flashing with Ext ROM is much easier, and is also included in the thread.
Hope that may help.
Click to expand...
Click to collapse
Tong,
Please teach me how to flash Radio Rom separately, I know you are the expert on XDA. Have you try out the WM2003SE if so can you solve the problem on widcom issue with handsfree profit. Please teach me la.
Alex
Alex,
Can you view the thread I provided as above? At there, you can know all about how to upgrade ROM, flahs Ext ROM and Raio ROM.
I don't konw what is the widcom problem you encounter.
By the way, I am not 'expert' and just know a little. Thank you.
Tong
negatong said:
Alex,
Can you view the thread I provided as above? At there, you can know all about how to upgrade ROM, flahs Ext ROM and Raio ROM.
I don't konw what is the widcom problem you encounter.
By the way, I am not 'expert' and just know a little. Thank you.
Tong
Click to expand...
Click to collapse
Tong,
Help, I have follow the step from the article your mention to flash the ROM but each time I got the error of :
Section = 1
Not allow
update!....
Please help. BTW can you flash you CHT1.66 into a 128 or 256 SD Card so that I don't need to the CEROM file again.
Please help.
AL
I just uploaded Extended Rom files to FTP.
Also rar archive attached to this msg.
How did you unlock the extended rom. Could you please post the tool that you used to gain access.
Thank you,
Mike
I have been decrypted ms_.nbf and extrracted these files.
what is thwe password to decrypt ms_.nbf for XDA IIi ?
It's really amazing that you found it.
Thank a lot
The O2UK_connectionsettings cab is in config.txt but the cab is missing. Is this intentional?
Surprise !!!
Caller_ID_Alpine_Generic_WWE_RC16.CAB = Caller_ID_Magician_Generic_WWE_RC13.CAB at ExtROM Qtek 1.05.116.
(Caller_ID Ver. 1.20 build 18567)
also
SmartDialling ver. 1.0 build 18076
PhonePad ver. 1.0 build 18567
------
Encryption method is changed.... there is no password.
I can only decrypt these files.... i can not encrypt them back.
many thanks
many thanks ... genious
thanks a lot really nice one specially:
SmartDialling ver. 1.0 build 18076
PhonePad ver. 1.0 build 18567
dont use the patch.cab file it is specifically meant for XDA IIi else you will have to hard reset your device.
tupisdin said:
I just uploaded Extended Rom files to FTP.
Also rar archive attached to this msg.
Click to expand...
Click to collapse
Can we install these extend rom, particularly the bt3900 to xdaII.
I am using xdaII, rom version 1.66.00 WWE
Man this Network lock sucks
Hi there all. I just got an XDAIIi from my sis in the UK. How ever after hours and hours of going through the forum I realised that the only way to unlock my PDA is through imei check. I hope that there is a program on the way to unlock them same as the XDA 2. Cheers
Anybody knows where to find a cab file for the intellidialer used by
Asian Version of WM2003 SE? Thanks brothers! :wink:
genesis said:
Anybody knows where to find a cab file for the intellidialer used by
Asian Version of WM2003 SE? Thanks brothers! :wink:
Click to expand...
Click to collapse
here it is for other intellidialer skin look for this thread
http://forum.xda-developers.com/viewtopic.php?t=13334
heres the intellipad and its skin ..
run first the intellipad before running the intellipad_skin.cab to prevent from overwriting .. the skin ..
Someone can tell me how can i install WM5 for Qtek 2020
Qtek2020
Version ROM 1.66.02FRA
Date ROM 02/23/04
Version radio 1.10.00
Version proto... 1337.18
Version ExtROM 1.66.142
Now my Qtek use WM2003 FR version 4.20.0 (Build 13252)
I don't hack anything...
I'm noob...
Plz help step by sept... thx so much....
Nobody can help me?????????
Plz....!!!
belle_lune said:
Nobody can help me?????????
Plz....!!!
Click to expand...
Click to collapse
When you download a rom upgrade, you will find a text file read_this_first.
Well read it first!
Then ask questions for parts you didn't understand well.
And read this too:
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,26,6594,page=1
Thx! But i can't to find the mode bootloader. Can u help me . If it need download, plz give me the link... i searched but not found.
thx u so much!
he knows
http://forum.xda-developers.com/showthread.php?t=280119
ok, it donne right now... thx so much
But i cant connect by ActiveSync. It need drive. I have the CD install original but i cant find drive in this. Someone can give me the drive for Qtek 2020, WM5.
Thx!!!
it dont need the pda cd if it needs a cd it would be windows
But i can't find on the Internet... Can i help me... Plz
belle_lune said:
But i can't find on the Internet... Can i help me... Plz
Click to expand...
Click to collapse
Can you tell us what happens when you put the pda in its craddle?
Do you see any error message about an unknown device ?
Be more specific about the problems...
Cheers,
.Fred
I get it ... thx so much everybody......
Hi. Am new here. I got given a o2 XDA for free from my mate. The PDA is in German. Can any one please tell me how I can change it to English? What do I need to do it (hardware etc). Also if I download a program for it, how do I install it, do I put on the memory card?
Details:
Rom Version 3.19.01 GER
ROM Date 05/27/03
Radio Version 4.21.00
Protokoll Version 32S54
Thanks , any help to Appreciated.
You have to flash a new ROM on it.
Programs are normaly installed via ActiveSync.
Stefan
LumpiStefan said:
You have to flash a new ROM on it.
Programs are normaly installed via ActiveSync.
Stefan
Click to expand...
Click to collapse
Thanks. Where do I get the Rom, how do I flash and what is ActiveSync? Sorry that I might sound stupid but I'm new to PDA's..
http://www.romkitchen.de/ <--- roms
http://wiki.xda-developers.com/index.php?pagename=HTC_Wallaby <-- how you flash
http://www.google.dk/search?hl=da&q=activesync&btnG=Søg&meta=lr=lang_da|lang_en <-- what activesync is