Hi ppl, have external GPS for Wallaby which cable connects to the port on the bottom of the wallaby, since Im considering the buying of the Qtek S100 maybe someone know is the connector on the bottom compatible so I can use GPS on S100 too ?
Tnx !
Looks bad.
As much as i know, the S100 has just USB-Interface, and not serial as the Wallaby. Only Bluetooth GPS-Receivers will work....
Stefan
My hands was faster than brain, later I ve checked connectors and found same thing you told Stefan, sorry !
Anyway that S100 has gone before I layed my hands on it (already sold) so now I have offer for 2020. Checked pictures, connector looks the same as in 1010.
Same question, does anyone know are they compatible, intend to use GPS and travel charger from 1010 on 2020...
Thanks and sorry for bothering guys ! BR !
No problem.....
And yes, you´re right Wallaby and Himalaya has the same connector. So they are compatible and you can use your GPS with it.....
Stefan
Thank you Stefan, you are an (blue) angel
Best !
Hi All,
Just got an old xda form a friend,it it possible to modify it and add an internal usb port instead of cradle or the normal connections cable?
Best Regard
Already seen a photo here in the forum, where a user installed a common USB-Port. But why not using the original connecor?
Stefan
my son has a VPA V with usb port ,I would like to have one cable to use everywhere.
can you send me the link for the pic you saw?
http://forum.xda-developers.com/showthread.php?t=242772&highlight=connector
Hy Friends,
I have an "old" Wallaby (MDA1 T-Mobile Germany) and i want to use it as an GPRS Modem connected via serial Port or infrared Port. But my also "old" Laptop (Toshiba Tecra 500cdt, with Win98se) couldn´t find any Modem on those Ports. The Wallaby is connected but how do i get this cute little Toy to get recognized as an Modem?
Please Help me with all Kind of Ideas......
http://forum.xda-developers.com/showthread.php?t=264072&highlight=modem
http://forum.xda-developers.com/showthread.php?t=253189&highlight=modem
http://forum.xda-developers.com/showthread.php?t=240856&highlight=modem
http://forum.xda-developers.com/showthread.php?t=236602&highlight=modem
http://forum.xda-developers.com/showthread.php?t=236467&highlight=modem
Thanks so far for your very fast answer. I will try the instructions tomorrow. But i need to find the settings for t-mobile.
So long... very great and fast help.... like ever on this board!!!!!
THANK YOU
I will be back.....
i am new in this. i have a HTC S411 cell and i wanna to make a usb cable beacuse i just the device anything else. I was looking for the internet and i need what are pins eaxctly to connect to the usb cable. Can anybody help me? thks
aldo0203 said:
i am new in this. i have a HTC S411 cell and i wanna to make a usb cable beacuse i just the device anything else. I was looking for the internet and i need what are pins eaxctly to connect to the usb cable. Can anybody help me? thks
Click to expand...
Click to collapse
Buy a cable..they are not that expensive.
Hi All
We have re-lived a totally dead qtek 9100 via J-tag following the pda.ru turotal, however the configuration of H-JTAG (from PDA.RU) have a some errors.
I glad to recover my QTEK
The Procedure that i have follow is:
1. Make a Wiggler Jtag interface with this circuit that have a 1 dollar less cost to made.
2. Conect the proper Jtag Pins from de wiggler to the Qtek board
3. Power Up the Wiggler and the Qtek Board via USB Charger and proper connection of the battery.
3. Run H-jtag with the proper configuration
4. Run No-ICE acording to the PDA.RU tutorial
5. Reflash the IPL/SPl with a RUU
However i have troubles to upload the screenshots of my configuration, if anyone has interested, mi msn is [email protected]
Thats All, enjoy your QTEK
Configuration Screenshots For recover Wizard
At this point i attach the proper files to recover the wizard
Another Screen Shots
I upload directly the screenshots and ths sspl imageflie
Upload Another PICS
Ths Wiggler, and NOICE
Will try ASAP on my second deadwiz
GOD BLESS YOU
G4 rom
Please i need to know where to get the rom used for this solution. I was able to use jtag to boot to bootloader mode ..now i think i need a good rom to flash it with
justx24
Please, could you just show me what a Jtag wiggler for Qtek 9100 looks like?
I've seen many models on eBay, but I just can't figure out which one to buy...
For my solution, I make a Wiggler accordingto the scheme (see my attachements), I have electronic knowledge, and I make my own circuit. In your case I can't help you to chose a commercial circuit, because i don't have tested none.
Best regards
Hey!
My Wiz iss bricked, too, so I'm searching for a solution to recover it again.
Can somebody tell me, if it's possible to use this Wiggler to connect via J-Tag? I mean, of course I'd have to connect the pins to the Wizard with this one. But that would be it, right? Otherwise i'd try to build my own one.
Btw, are there adapters which work via USB? I don't have a parallel-port on my pc....
Thanks for help
Matzinger
I did a quick look on the datasheet you mentioned and cant find the pinout of the LPT side (Needed to connect to H-JTAG).
On the manual of the H-JTAG (http://www.hjtag.com/download/USER MANUAL (EN).pdf) are the compatible devices listed. The JTAG interface is a standard interface, I think all of them must work. If you can get the wires successfully on the wizard i'm shure you can make the circuit mentioned as attachment or on the manual (page 27).
btw. songokumanjimaru thanks for the tutorial, my wizard lives again. I was to lazy to go to a shop for the HC74244 and connected the wires with only some resistors, but its not recommended if you don't know what your doing. The LPT-port is very sensitive.
Hey,
sorry for answer so late.
Well, I made my own wiggler, even with the 74hc244, but j-tag won't connect to the Wiz. It always says that it cant find a device and i should connect it. I really don't know where i made a mistake...man...
Maybe i should try your version with only the resistors and no 74hc244....How does that work exactly? just switch 100 Ohm resistors between the LTP and the Wiz?
btw. how do i know that the wiz is on?
Greets
Matzinger
Hey,
ok, update:
now i get a connection to jtag, but it always says that it is an unknown target. and he shows me always different types of adresses. sonetimes it still tells me that it doesn't find a target anyway.
I've no idea....
Greets
Matzinger
Hi,
As you can see below in this datasheet the 74HC244 has 8 inputs and 8 output:
http://www.datasheetcatalog.com/datasheets_pdf/7/4/H/C/74HC244.shtml
ex:
This is another schema for Satellite STB :
http://xsat.rtfm.be/hard/jtag/jmixte.gif
You can compare both of them.
Hardware :
http://worldsat.rtfm.be/contenus.php?id=285
IMPORTANT : Some JTAG sofwares don't drive the JTAG interface to
the same pinout !It means that the pin A1 A2 A3 ...are driven by the software
and must fit the TDI, TDO ,RST ... signals.
Also Check the power supply : 3.3V.
the right software with the right hardware is required to flash the Qtek.
http://www.hjtag.com/
Bye.
Fanch56
Thanks for help.
I'm sure, i connected the pins right.
My problem could be that the Wiz doesn't turn on, when pressing the Power and Camera Button. I measured the current between the wiz and the battery and there is no change when holding the buttons. its around 0.01mA all the time. onyl when i press the small soft-reset button with a pen it goes down to zero. When I disengage it, it goes up to 0.01mA again.
So i think that's my problem and now the wiggler itself.
But how to turn the Wiz on???
Greets
Matzinger
Hi ,
Is the power supply on the 74HC244 correct ?
check the Vcc+Gnd pin with a digital voltmeter.
Are the grounds pin connected together ?
Which software do you use to drive the JTAG hardware ?
thanks
Fanch.
Hi again !
I'm sorry to tell you that my jtag chipset is a:
74HCT244 and not a 74HC244
the difference between HC and HCT is important.
HC is faster than HCT but
HCT = compatibility reason between signals for nmos & cmos or TTL and cmos
the threshold for 74HCTxxx is at 1.4v
power supply must be 5v.
the threshold for 74HCxxx is 2.5v
power supply must be 5v
It COULD be the reason of your problem.
If so buy a 74HCT244.
This small detail could be important , I met this kind of problem
on a frequency generator I build one year ago.I just replaced the 74HC by
a 74HCT and everything was ok.
Good luck.
Fanch
hi
i get a connection to jtag, but it always says that its unable to find target and show 0x00000000 and when i change the pin it show 0xffffffff
rascalmike said:
hi
i get a connection to jtag, but it always says that its unable to find target and show 0x00000000 and when i change the pin it show 0xffffffff
Click to expand...
Click to collapse
0x00000000 means you only read zeros (data line to GND) and 0xffffffff means ones (data line to Vcc). So I don´t think you have any JTAG readout. One of the problems I met, was the low battery of the wizzard, I charged it manual.
songokumanjimaru said:
3. Power Up the Wiggler and the Qtek Board via USB Charger and proper connection of the battery.
Click to expand...
Click to collapse
What exactly voltage you used to power wiggler 3.3 or 5 volts?
Hey.. I have some problems with flashing a ROM containing SPL.. Could anyone help me? I flashed all kinds of SPL's found on This forum, even on Google, but non of them seems to be working.. After flashing, I can't turn on my device, it only powers on with with JTag.. Any ideas? Thanx