Related
Good Evening First off i would like to say hello im new to this site (Virgin) and i have tried to search but to no avail, i have a Dopod 838Pro and i got it with a plan from my Mobile vendor in australia (3) now i want to clear there settings (.cab) and just use the standard factory settings and modify them but no matter what i do it keeps loading the (3) Software and etc any ideas on how to clear it and go back to factory
Cerwinvega said:
Good Evening First off i would like to say hello im new to this site (Virgin) and i have tried to search but to no avail, i have a Dopod 838Pro and i got it with a plan from my Mobile vendor in australia (3) now i want to clear there settings (.cab) and just use the standard factory settings and modify them but no matter what i do it keeps loading the (3) Software and etc any ideas on how to clear it and go back to factory
Click to expand...
Click to collapse
First do a hard reset. Then, when the phone boots do a soft reset before the customisations begin. This will put you back to the base rom without the carrier settiings. (This may not be completely correct because some carriers may embed their settings in the rom). Give it a try, but remember that the hard reset will clear all your data and loaded programs, so back up first.
incorrect... hard reset your PDA... make sure you remove your SIM card when you boot up... then uninstall the 3 Mobile Mail client by using the 'Remove Programs' and reboot... insert your SIM card again... but say no to the autocustomisation 'netwiz' that pops up...
and bingo!!!
Hello everyone here on XDA !!!
First i want to say sorry if there is another thread with this particular problem, searched the forums but i didn't find something related to my problem
Here's the thing:
A friend gave me an Atrix 4G for free, with no baseband and no IMEI number. All i know about the device is that he used OTA update and went wrong.
Here is what i know about the device
Stock 2.3.4 no ROOT and no Bootloader Unlocked
System version
45.31.0.MB860.Retail.en.GB
Build number
4.5.2A-74_OLE-31
(i think the phone was not on any UK Carrer because the system version, i saw that those who are branded have carrer name not retail, altough i don't know what "retail" comes from, maybe the phone is unlocked by factory)
What i tried to do to solve problem
Searched internet , found something about radio issue, flashed different radios via fastboot with no luck.
Found a stock image on internet with the same build nr. and system version. it's .sbf.gz file.
i used RSD even tough i read it can brick my device for good but i said wtf (turned off the phone and enter RSD mode with Power+Vol. Down button)
1 used the file as it is XXXXX.sbf.gz and rsd unpacked it and flashed it.RSD said "passed" the phone booted up with "insert SIM" message.Rebooted to insert sim but again no baseband and no imei number
2 i unpacked the archive with 7zip to get the XXXX.sbf file, RSD said passed the phone booted up with "insert sim" message, rebooted and again no baseband and imei...
in both cases my baseband number is N_01.100.00R ( i don't know if these are correct, i think this imei number is the one from witch device was .sbf extracted or something like that and after reboot the data from ROM is not the same as the data from NVRAM)
Mod Edit: Don't post your IMEI on a website full of hackers, silly
I also found something about NVRAM and it's data that could possibly be corrupted but nothing about how to restore it, and messing around with the NVRAM could lead to a dead device
This is not the first time in android world my friends have smartphones and ask me to root and instal custom roms on them and every time they have problems with their devices i help, but i do not own a smartphone because i can't afford one and that's why i want so bad to make this atrix work
Again i'm sorry if this is a duplicate thread but i searched around xda and google but didn't found the answer , maybe i'm too dumb....
EDIT: well guys i did it, if someone encounters this problem, here is how i fixed it:
1. RSD the apropiate .sbf for atrix, and let it boot for the first time
2. reboot or pull the battery out and start the phone.enter fastboot mode and flash a radio or the same radio as in your .sbf file
done! now the phone will have imei and baseband after reboots
edit 2: guys today my phone rebooted and i have no baseband and imei, the phone worked for a day and a half, rebooted twice, but today was the 3'rd reboot and went band, i flashed the radio but nothing, please help me
real cool guys....
you guys are great, a lot of views not one single reply, about anything, for other stupid questions around here is somebody to post an answer, for my question nothing, not a single tought...nice
junk33 said:
you guys are great, a lot of views not one single reply, about anything, for other stupid questions around here is somebody to post an answer, for my question nothing, not a single tought...nice
Click to expand...
Click to collapse
First, CALM DOWN.
Now that we are all cool, this is a forum, not a help desk. If no one has posted anything is either this has been answered before or that no one has an proper answer.
This has been in fact, discused a few days back and we reacghed the conclusion that there was nothing we can possibly do to fix it, other than take it back to motorola's rma
Console
well thank's for the answer, one more question, can i acces a debug console or whatever it's called, i mean there is an error after first reboot and it's keept somewhere in a tex file i guess, how can i access the "guts" of this device?, since i don';t have any idea where to take it in my country, and no GSM Service was unable to help me with an answer i want to mess around with it and learn more about android
junk33 said:
well thank's for the answer, one more question, can i acces a debug console or whatever it's called, i mean there is an error after first reboot and it's keept somewhere in a tex file i guess, how can i access the "guts" of this device?, since i don';t have any idea where to take it in my country, and no GSM Service was unable to help me with an answer i want to mess around with it and learn more about android
Click to expand...
Click to collapse
I guess it can be accesed somehow, but never researched enough. On hte developemnt subforum are a few post discussing somethin similar to this, perhaps their op can help you out
his phone has been flashed with unauthorized software and is locked
call your mobile operator for additional support
pleas note that repair/return for this issue may have addtional cost
what i need to do
tanks?
daniellamp said:
his phone has been flashed with unauthorized software and is locked
call your mobile operator for additional support
pleas note that repair/return for this issue may have addtional cost
what i need to do
tanks?
Click to expand...
Click to collapse
which procedure you followed?
daniellamp said:
his phone has been flashed with unauthorized software and is locked
Click to expand...
Click to collapse
The message means just what it says. The phone has detected that you installed or changed some system files that it doesn't like. And is exhorting you to go to a service center and let them return your phone to 100% stock.
We would know a lot more and could have given you a lot better advice had you provided basic and critical information such as which S5 model you have and exactly which files you tried to write to your phone. Since you didn't provide those crucial details, we have no idea what is really going on. Presumably you wrote the wrong firmware to the phone or botched a rooting process.
Without any details, all I could suggest is that you use the Odin software to write a 100% stock firmware file the phone, followed by a factory data reset. This will remove any user files or changes and should resolve the error message. Then you can redo whatever you were trying to do.. root, update, etc.
.
Flash a different kernel made for your device, that is also a kernel error. good luck.
Actually, you need to provide a little more info, like what base are you running and so on. Complete questions will yield complete results.
Could this also be an indication that somebody has injected wiretap/spyware software on your phone? Interestingly, I recently went through a separation and within a week following the separation, my phone began to lag (became very slow), would shut down spontaneously, had less memory space available (without any evident source for the cause of a memory reduction (and with a 64 gb SD card)), and on two occasions, producing this message with an exclamation point contained within a yellow triangle immediately after a spontaneous (not user initiated) reboot, and those reboots occurred with more than enough power to operate (one time at or around 50% and the other at 11%).
Also, soon after I noticed the issues with the phone, I received a T-Mobile "Emergency Security Update" notification. It was not mandatory. I proceeded with the update. Then, within a week thereafter, I received another, that not only stated that it was an Emergency Security Update, but was mandatory, and further provided notice that to ensure that my device had not been compromised, the security update was necessitated.
A question of interest on that note, is whether or not the breach (wiretap & spyware software - (vendors available on-line)), occurred only at the device level, or whether or not it modified the SIM. It would seem, if in any event, the above did occur, that a hard reset, probably three times over, and a new SIM would be in order, if for no other reason than diligence in trying to ensure the integrity of the device and SIM (privacy/protection).
My Phone: G Note 4 (32 GB Internal / 64 GB Ext.)
Any thoughts?
fffft said:
The message means just what it says. The phone has detected that you installed or changed some system files that it doesn't like. And is exhorting you to go to a service center and let them return your phone to 100% stock.
We would know a lot more and could have given you a lot better advice had you provided basic and critical information such as which S5 model you have and exactly which files you tried to write to your phone. Since you didn't provide those crucial details, we have no idea what is really going on. Presumably you wrote the wrong firmware to the phone or botched a rooting process.
Without any details, all I could suggest is that you use the Odin software to write a 100% stock firmware file the phone, followed by a factory data reset. This will remove any user files or changes and should resolve the error message. Then you can redo whatever you were trying to do.. root, update, etc.
.
Click to expand...
Click to collapse
i have the same error my phone is galaxy S6 Edge SM-g925T after actualization send for T-MOBILE i have that error.
Hello everyone,
Iam Claudio, iam new in this forum, and i need a looooot of help from the Android master.
In first place, I must apologize for my english, is bad, i know, but i try to explain the best i can.
Ok, here is the thing: I have my S5830, and i have problem with that, because the phone show me always "only emergency calls", and i cant make calls or send sms, etc. I inspect my SIM card, and in any other phone work very well, so the problem is in my device; so, reading a lot of information, i undertood that the CSC in my phone is incorrect. Well, maybe that is the problem, because recently back i flash the phone and "unbricked", following the next instrcutions:
http://forum.xda-developers.com/showthread.php?p=30731157#post30731157
So, the phone was unbkicked bery well, but i use the "Open Australia" firmware that quoted there. Everything looked good until the phone show me "only emergency calls". Ok, so only that i need is change the firmware for my FW country, and here is an another problem: i dont know if is the "i" version or another version, ¿why? because actually i have the "i" firmware version on my device, but iam from Chile, and the only firmwares for my country (according SamMobile) are "C" and "L" versions. I downloaded both versions, and i try to install that, but Odin(4.1X) doesn't recognize the phone, only is recognized when i use modified Odin for "i" devices. so ¿any suggestion for that? What I can do to fix this?
Now, i have other problem: When i try to install CWM Recovery 5.0.X.X, i can access to the recovery, but when i reboot the device, it come back to factory recovery, so ¿why the CWM Recovery is temporaly?
Finally, i trying to expand my "phone memory" using my card, for LINK2SD application, but i can't, because the device can not be mounted. I used EXT2, EXT3, EXT4 (always 512MB) primary partition and FAT32 primary partition, but doens't work; What I can do to fix this?
I hope you can help me . I dont know what else to do to resolve this. Stay tuned to your comments. Of course, thank you very much .
Regards
[email protected] , Just reported your post to be removed to help section for proper troubleshooting process ( General section is dedicated to walk through/Tutorials/Mods/etc etc ) .
Topic will be transferred there in 2 days by mods , so don't be surprised mate .
Before I start troubleshooting , remove your battery and see your model number registered there .
Study this topic i assisted while ago for more information regarding 3g and similar situation , before i continue with rest of your concerns ,, lets focus on fixing your call for now mate .
For permanent CWM recovery console , you need to flash custom kernel comes with CWM embedded ( do not do such thing for your stock , just flash temp CWM every time from your stock e3 for technical reasons for now ).
I will address all of your concerns eventually,,,,,,,
Now, No 3G in the phone
ehsanotaku said:
[email protected] , Just reported your post to be removed to help section for proper troubleshooting process ( General section is dedicated to walk through/Tutorials/Mods/etc etc ) .
Topic will be transferred there in 2 days by mods , so don't be surprised mate .
Before I start troubleshooting , remove your battery and see your model number registered there .
Study this topic i assisted while ago for more information regarding 3g and similar situation , before i continue with rest of your concerns ,, lets focus on fixing your call for now mate .
For permanent CWM recovery console , you need to flash custom kernel comes with CWM embedded ( do not do such thing for your stock , just flash temp CWM every time from your stock e3 for technical reasons for now ).
I will address all of your concerns eventually,,,,,,,
Click to expand...
Click to collapse
Thanks @ehsanotaku for your help and thnaks for answer so fast!
Ok, i followed your instructions, and now i can see my net!!!!!! yuuupiiiii!!! But, Not everything is so perfect, because i dont have 3G network. I removed the battery and i see the model number registered there, and that is "M" model, but i have installed the "i" version on the device, so, maybe, that could be the problem (i saw in SamMobile, and M version is just for Chile).
I dont know if i change the FW version, could be lost the IMEI, Baseband, or another kind of data, so, in first place, i need to backup the nandroid, efs and all the important data, but i don't know how to do that in this cellphone.
Could you guide me a little more, and help me on this , please?
I will be attentive to your comments. Of course, thank you very much .
Regards
@skullsleep; before we proceed with more instructions , tell me which part did you act on it and what do you mean you can see your net ? what do you see when you dial "*#06#" without quote into your dialer ( 15 digits IMEI number box is appeared or it was wiped out ) ?
what is your SIM card carrier/operator of M model from Chile ?
i variation from Open Australia Un- bricked your device , but your CSC ( your APN settings of your carrier ) and Modem ( base band ) was altered . Therefore you lost the ability of making contact/call / SMS/3g through your operator so far .
Right, i've seen a lot of people have trouble with their phones not identifying their SIM cards, and i myself faced this problem awhile back, i upgraded to Android 6.0 on my Honor 7 PLK-01, after i wasn't happy with it i decided to downgrade back to 5.0.2, running B130, and after the downgrade my H7 no longer identified my SIM card. The only thread related to this was someone asking how to CHANGE the IMEI of the H7, and apparently asking that was against XDA rules, but i read through the rules and saw nothing against it, unless i missed something, but i hope this isnt against the rules.
First i'll try to explain what an IMEI is based on my little knowledge, the IMEI is needed for your network operator to contact with your phone (or sim, im not exactly too sure on that), and if your IMEI is missing, your sim will not work.
Basically, here's how to fix/get back your IMEI 1 & IMEI 2.
ATTENTION, IF YOUR PHONE IS ROOTED AND HAS A CUSTOM RECOVERY, YOU NEED TO UNROOT YOUR PHONE AND GET RID OF THE CUSTOM RECOVERY
STEP 1
Check what your phones build number is, you can do this by going to Settings > About Phone, you should have your Build ID listed in here
STEP 2
Go to NeedRom.com on your H7 and download your corresponding OS update, for example my phone was B130, so i downloaded the B130 > B140 update, i would post the link but apparently i can't post outside links since im a new user
STEP 3
After you've downloaded your update, you don't need to move it to any dload folder or anything, just go to Setting > Updater, click on the menu button on the bottom of your screen, choose local update and it should show your downloaded update there, click on it and you'll be granted and option to restart your phone, click on restart and it should take you to the install screen.
after it's installed, your phone will restart and your IMEI should now be restored, and your SIM should be working again.. You should notice it instantly from your SIM working again, but you can also check it by typing *#06# into your dialer
i personally didnt find any other way to fix the IMEI on H7, this was the only way i got my IMEI back.
If this worked for you, please leave a thanks on this post :angel:
My other threads
http://forum.xda-developers.com/hon...deleted-os-t3455505/post68542964#post68542964
So, you got back both the IMEI's successfully after this?
DigiGoon said:
So, you got back both the IMEI's successfully after this?
Click to expand...
Click to collapse
yup, fixed both IMEI's successfully :angel:
Then its awesome..!!