hey.. i have a problem when i'm reflashing the rom of my xda2..
when i run himaupgradeut or himaupgradeut_noid, i click next, then the dialog box shows "checking data from your device...".. then after a while, the program closes. why?
i have the phone connected to usb. i'm using windows mobile 2005.
thanks for your replies.
Related
Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...
I was upgrading from WM 6.1 to 6.5. During the installation of ROM, my phone felldown and disconnected from CRADLE. After that, i get multi-colored screen showing,
" RUUNBH
NIKI200 MFG
SPL-1.15.Hard
Serial"
When i try to connect with USB, it shows USB from Serial. But this mobile is not detected in my PC. When i try to update from ROMUpdate utility - any version, as this mobile is not detected, i can't do the upgrade.
I tried resetting -sfot reset, hard rest, switched off and restarted my mobile - no help - same scenario - mobile shows the multi colored screen.
anyone faced such scenario... please help me out?
dpideva said:
I was upgrading from WM 6.1 to 6.5. During the installation of ROM, my phone felldown and disconnected from CRADLE. After that, i get multi-colored screen showing,
" RUUNBH
NIKI200 MFG
SPL-1.15.Hard
Serial"
When i try to connect with USB, it shows USB from Serial. But this mobile is not detected in my PC. When i try to update from ROMUpdate utility - any version, as this mobile is not detected, i can't do the upgrade.
I tried resetting -sfot reset, hard rest, switched off and restarted my mobile - no help - same scenario - mobile shows the multi colored screen.
anyone faced such scenario... please help me out?
Click to expand...
Click to collapse
The only thing i know is that Activesync doesn't recognize your mobile when in rainbow screen. I have had the same problem you have last night. Was updating when the usb disconnected. When i attache thee Htc to my pc in rainbow mode i hear the connect sound in windows!!!that's when you do the rom update. (turn of the usb mode in Activesync to be sure).
This worked for me last night so i hope i helped you. And otherwise: there are a lot of guru's here that will help you out 4sure. That's why i love this place.
ps the reason for turning of the usb mode in Activesync is because sometimes (in my case) the plug and play usb app and activesync have a little bit of an compatibility problem when my touch dual is in rainbow modus.
You're correct.
Thanks you're correct. I found it was a issue with Activesync. Only once it connected with USB and i tried formatting with MTTY (commands from XDA).
After formatting the device, now it's not letting me to flash any ROM on it? First after rebooting the device, it takes me to ROM splash screen, later it's not getting detected in USB & in PC?
Without detecting device, i am not sure, how i can proceed further? Not sure, i bricked my device (i heard about XDA Kaizer Repair ROM's - flash it into SD cards and overcome this issue)?
Can anyone advise me?
Has anyone ever recieved the critical error 608? I cannot start communications with my device and the computer? Anyone have any ideas or ever seen this
Communications Error
Cannot start communications with desktop computer. Remote Networking could not start due to a critical error (Error 608).
Please reconnect your device. if the problem persists, restart your device using the instructions provided by the manufacturer.
Click to expand...
Click to collapse
I have been here all day trying to solve this... no answers...
Using Windows 7!
yes i use 7 to
i try all :S
I am using Radio 1.71.09.01 and ROM from Insomnia:360_2-21903-3G;
Also got this problem on XP.
Computer does detect my HTC, I have the latest and correct drivers.
Message that appears on my HTC is:
Communications Error
Cannot Communicate with the OC because of the following remote networking error: 608
Try to reconnect the device.
I already boot both PC, and HTC. Nothing!
me to, Radio 1.71.09.01 and ROM from Insomnia:360_2-21903-3G;
and i try other rom and radio but same error
i do downgrade to WM 6.1 with bootloader [when you turn up device press cam but + power + reset and then insert usb and you can install other rom & radio] .....
and try to reinstall Windows Mobile Device Center but no help
Solved it... set all your IP connections to auto (in the Nikki of course).
shadowEOS said:
Solved it... set all your IP connections to auto (in the Nikki of course).
Click to expand...
Click to collapse
how? Can you explain in more details
Hey,
Updated my phone with the Nordic firmware when it came out and all was well.
today I tried to connect my phone to the laptop with the usb and the title error keeps coming up. I can't do anything pc related with the phone now. The phone LED comes on when plugged in but the menu doesn't show up on the phone.
I havn't changed anything vital... or at all. I factory reset the phone but that hasn't changed anything.
Any help on how to fix this will be greatly appreciated.
Thanks in advance
Z3X
Edit: Tried Reinstalling Update Service and PC Companion. No joy.
Edit: CMD Prompt information:
Code:
Please connect Xperia in flash mode.
Press any key to continue...
C:\Users\Z3X\Desktop\X10Flash_Unbrick>java -jar X10Flash.jar
08-Nov-2010 22:55:25 X10flash main
INFO: start
javo.io.I0Exception: Unable to open channel, GetLastError=0
at com.sonyericsson.cs.usbflasnative.impl.USBFlashNativeImpl.openChanne
l<Native Method>
at X10flash.main<X10Flash.java:410>
Exception in thread "main" java.lang.NullPointerException
at java.lang.String.<init><Unknown Source>
at X10flash.testPlugged<X10flash.java:103>
at X10flash.run<X10flash.java:375>
at X10flash.main<X10flash.java:417>
Press any key to continue...
Hoping the above can show the connection error
Edit again: Tried my phone on a different PC. Still get the error. Whilst my friends X10 runs normally and is recognised on both.
Z3X said:
Hey,
Updated my phone with the Nordic firmware when it came out and all was well.
today I tried to connect my phone to the laptop with the usb and the title error keeps coming up. I can't do anything pc related with the phone now. The phone LED comes on when plugged in but the menu doesn't show up on the phone.
I havn't changed anything vital... or at all. I factory reset the phone but that hasn't changed anything.
Any help on how to fix this will be greatly appreciated.
Thanks in advance
Z3X
Click to expand...
Click to collapse
Try to reinstall PCCompanion
Sent from my X10i using XDA App
rendeiro2005 said:
Try to reinstall PCCompanion
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Tried. Failed Still the same result.
Bump..............
If you can't untill now you have to reinstall again sorry.
Run seus and follow the onscreen info.
Sent from my X10i using XDA App
Did your friend use the same cable that you were using when connecting to the pc?
EDIT: Have you tried resetting the phone as well?
kindred7 said:
Did your friend use the same cable that you were using when connecting to the pc?
EDIT: Have you tried resetting the phone as well?
Click to expand...
Click to collapse
tried two different cables.. both of which work with other phone... yet the ony charge with mine... its doing my head in!!!!! i dont even get the USB not recognised error now... it just charges when connected to latptop
The connector on your phone may be damaged, is there anyway you can take a good look at it and compare it with your friends? Try to jiggle the connector when your connecting, or hold it firmly with an angle to ensure connection on the pins.
hi
i recently got hd2 t moble running kumar's leo premium rom v2.6 wwe.
problem is that i cant synchronise it with the laptop. message appers "usp device not recognised" but phone gets charged while connected to laptop.
i m having windows 7 and windows mobile device centre running in my computer.
pls somebody help me correct this issue.
thanks.
Update win mo dev center from the Microsoft wmdc webpage.
samsamuel said:
Update win mo dev center from the Microsoft wmdc webpage.
Click to expand...
Click to collapse
hi,
thanks for the response. i have already tried these,
1. changed the cable and tried different ports of the computer
2. hard resetting the phone
3. uninstalled and reinstalled the wmdc
4. restarted laptop while phone is connected and vice versa
5. connected phone in bootloader mode. it said "serial". no change after connecting
phone.
6. checked with different computers
nothing worked. still it says "usb device not recognised"
what else can i do?
would a new rom flash via the micro sd help? my hd2 already has the custom rom installed. so i guess no need to install hspl.