This is based on another thread at the Blue Angel Upgrading Section.
Supposedly, Increasing the Paging Pool value, allows for smoother speeds at wm5... at the cost of RAM in the Programs area.
Just thought I'd share it here...
Here’s how I did it…
1. Extract NK.nba
> xda2nbftool -x NK.nbf NK.nba 0×20040304
2. Open with a Hex Editor
3. Go To Address 0×00404650
It should look like
64 00 00 00 D8 FF 21 80 01 00 00 00 00 00 50 00
yung pagin pool size is
00 00 50 00 or reversed 00 50 00 00 w/c is 5,242,880 bytes
I changed it to
00 00 00 01 or reversed 01 00 00 00 w/c is 16,777,216 bytes
4. Update Image Check Sum
> xda2nbftool -c -u NK.nba
5. Repack as NK.nbf
> xda2nbftool -x NK.nba NK.nbf 0×20040304
6. Put in the same directory as HimaUpgradeUt.exe
7. Flash as you normally would.
married_jedi said:
Supposedly, Increasing the Paging Pool value, allows for smoother speeds at wm5... at the cost of RAM in the Programs area.
How you can estimate boost of speed after this change ?
Can you describe. It is worth of reflash and reinstall all progs ?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Supposedly, Increasing the Paging Pool value, allows for smoother speeds at wm5... at the cost of RAM in the Programs area.
How you can estimate boost of speed after this change ?
Can you describe. It is worth of reflash and reinstall all progs ?
Click to expand...
Click to collapse
I do not think that we will have to reinstall the progs.
2Jedy: Did you noticed any improvement in the speed? Which rom did you used? Is the method you described suitable for all roms?
Hello everyone.
With the development of the New ROM, I decided to describe this and that.
-How to Prepare files and packages.
-How to create stable SYS and OEM.
-XIP Porting (Kernel) - if it succeeds.
-Build/Mod. BLDR/BOOT Section
-Change PagePool
-Etc
Small introduction:
Subject shows the structure of folding and unfolding ROM.
Everything described here are doing at your own risk.
I do not answer with any damage to the device.
Please read carefully and proceed with caution.
Topic applies only Toshiba devices Tsunagi: TG01
Execute Image System:
This step tutorial will be further developed.
Once, I'll add this feature in my kitchen.
Add OEM Apps:
OEM - This package is derived from the *. cab file.
It must include:
- The *. dsm guid the value of the name,
- The *. RGU with the same value in the name, it must be in Unicode encoding.
It must also be free, the last line in the content of the text.
- Application *. exe, *. dll, or library
- A shortcut to the program / library - if it is needed. It is not mandatory.
- Content may be more developed (in the files / programs)
Such a package can be easily added to the root of the OEM.
If, of course, is properly filed
Dependence of the Application, the memory devices.:
How can you distinguish the memory which will hit your application / library?
This differs from the rule:
- Module - that is, a file that looks like a directory goes to RAM.
- File - normal-looking, *. exe or *. dll file, going to Storage memory
Porting XIP (Kernel) and insert this file to Image System:
[TUT][UTIL]Remote Porting XIP
Working good in my kitchen for Toshiba TG01
XPR to LZX Compression:
Open the file os.nb.payload in HEX Editor. Find this Lines:
Code:
F8 AC 2C 9D E3 D4 2B 4D BD 30 91 6E D8 4F 31 DC ř¬,ťăÔ+M˝0‘nŘO1Ü
01 00 00 00 01 00 00 00 01 00 00 00 34 00 00 00 ............4...
08 00 00 00 00 02 00 00 00 10 00 00 58 50 52 00 ............XPR.
And change to:
Code:
F8 AC 2C 9D E3 D4 2B 4D BD 30 91 6E D8 4F 31 DC ř¬,ťăÔ+M˝0‘nŘO1Ü
01 00 00 00 01 00 00 00 01 00 00 00 34 00 00 00 ............4...
08 00 00 00 00 02 00 00 00 10 00 00 58 50 52 00 ............LZX.
Save this file. Get this library -> cecompr_nt.dll, then insert to TOOLS folder from your Kitchen ROM.
Download cecompr.dll and overwrite it in your XIP. Build XIP, build ROM, see results. Now Image System takes less memory.
Small Support
Changes PagePool:
Use PagePool Changer
Porting/build BLDR/BOOT and insert this file to Image System:
[UTIL][UPG] buildbldr
Build Image System:
This function, have a my Kitchen.
Ultra Kitchen Edition - ROM Builder for Toshiba TG01
Modyfications SYS Directory
Remove TimeBomb:
Open file *.rgu from location ->SYS/Shell/, and remove two keys from this registry:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\DeviceBeta]
"Today"="Beta"
"Expiry"="Expires: %02d/%02d/%04d"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\DeviceBeta]
"About"="- BETA"
Now, Go to location -> SYS/Shell/, open file form module shell32.exe/S000 in HexEditor.
Search string 02 EB 7D 3E, and in both instances 7D change to BB.
from:
Code:
02 EB 7D 3E
to:
Code:
02 EB BB 3E
Remember, this sequence occurs twice
Thanks for Camelio
good idea, may be i'll try to understand something and build an italian version too, even if we are quit lucky with our tg01 'cause it's no brand at all.
Thanks for your great job with developement
Hey Nokser do you create wm6.1 rom for tg01?
Nokserze can you writa Polish version too?
here or in pdaclub forum, but I wont to understand anything, so it's more simple in our's language
Thanks for your job
Yes, of course
When you will to make this tourial? or you can write the tourial for stabil oem's now I want to make a rom but i can't create a stabil oem or a oem that's works... or you can tell me how i must put the oem.
Greats ALcAtRas
I give all my work in this, but first I must port WM6.5.5
Nokser, could we use the information you have gained about our device to port android?
Wm first, then we'll see Android
Nokser said:
Wm first, then we'll see Android
Click to expand...
Click to collapse
You think that is posible?There are a lot of people ho want that.
Everything is possible, but we shall see
Is this guide close to completion or has this been forgotten about?
I not forget.... I must gen. all options build structure ROM
Nokser said:
I not forget.... I must gen. all options build structure ROM
Click to expand...
Click to collapse
MAny of us are waiting for your light...
I know My friend
Small Update Thread
Nokser said:
Small Update Thread
Click to expand...
Click to collapse
Very good: I'm waiting for the next update impatiently. Do you know a good general tutorial, not device specific?
super_sonic said:
Very good: I'm waiting for the next update impatiently. Do you know a good general tutorial, not device specific?
Click to expand...
Click to collapse
You'll see ... if i end this tutorial
@Nokser:Can you help us to unlock t01a .It likes tg01 but it don't have code for unlocking .
Please...
Yesterday i brick my phone when try flash this beta TSS ROM in my X02T
http://forum.xda-developers.com/showthread.php?t=657694&page=3
Soo after fail i try with anothers ROMS too, like Mod-TG01TSS01.7z, Mod-TG01TSS02.7z (flash error, say invalid file), TG01TSS01.7z, TG01TSS02.7z (flash error, say invalid file), T01A_to_SP50_wm65.tsd, T01A_to_SP50_wm65-theduyet.enc and TG01WP-WM6.5-Orange-UK (flash error, say invalid file).
I still can use the SD downloader, i can flash "any" ROM whith pin method,
Before i brick my phone i make a RAW file of my phone and there is here:
http://cid-5bf4bd469b8aef18.skydrive.live.com/browse.aspx/X02T
txt is here:
------------------------------------------------------------------------------------
9.63M (0x9a0000) DSK1:
| 9.62M (0x99f000) Part00
423.00M (0x1a700000) DSK2:
| 1.62M (0x19f000) Part00
| 3.75M (0x3c0000) Part01
| 159.88M (0x9fe0000) Part02
| 257.75M (0x101c0000) Part03
7.42G (0x1daf80000) DSK3:
| 7.42G (0x1dab80000) Part00
STRG handles:
handle#0 8dda3d4a 7.42G (0x1dab80000)
handle#1 6e1e7b2e 257.75M (0x101c0000)
handle#2 ee1ed89e 159.88M (0x9fe0000)
handle#3 4e1ed87a 3.75M (0x3c0000)
handle#4 4e1ed832 1.62M (0x19f000)
handle#5 ee4ac72e 9.62M (0x99f000)
disk 8dda3d4a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 6e1e7b2e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk ee1ed89e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4e1ed87a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4e1ed832
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk ee4ac72e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
------------------------------------------------------------------------------------
Please someone could help me Revive my phone !!!
Thanks alot
Toshiba make a new update for X02T, a small update i think with SMS, this file is X02T_from_SP00_to_01_000.tis, soo is TIS file, maybe this file have the key for revive my phone.
link is here:
http://toshibamobile.com/cgi-bin/softbank/x02t/update/uprom.cgi?sp=00
or
http://update.toshibamobile.com/update/x02t/sp00/X02T_from_SP00_to_01_000.tis
You flashed TG01TSS01.7z, don't you?
Your situation is the same as "xandetonetti".
Please the following Pin method.(from Orange in T01A case)
--------------------------------------------
This Pin method is short Pin 1 and Pin 2.
And, You can The power button pushed with the state maintained.
Then, Your T01A screen displays your ROM after five seconds.
--------------------------------------------
Did it work? If not, can you try as naxt.
We now know that the TSS Encryption Key of X02T is 44460046.
However, The Encryption of your device is tsw,
because you flashed tsw bootloader ROM into your X02T,
You can try the following ROM.
*Official Orange UK ROM
http://www.toshiba-europe.com/mobile/Images/TG01WP-WM6.5-Orange-UK.zip
[TG01WP_5005000176.tsw → TG01.tsw]
*Official docomo JP ROM (T01A_to_SP50_wm65.tsd is extracted by zip. )
http://update.toshibamobile.com/update/t01a/wm65/T01A_to_SP50_wm65.exe
--------------------------------------------------
tgtool -t01a -sp T01A_to_SP50_wm65.tsd os.nb.payload
tgtool -t01a -mp os.nb.payload T01A_to_SP50_wm65.tsd T01A_to_SP50_wm65.bin
--------------------------------------------------
You can download TSW TOOLS by cotulla from
this URL(http://cotulla.pp.ru/Misc.html), and
convert bin to tsw by this tool in TG01 mode.
[T01A_to_SP50_wm65.tsw → TG01.enc]
You can flash those ROM, maybe.
yamadori said:
You flashed TG01TSS01.7z, don't you?
Your situation is the same as "xandetonetti".
Please the following Pin method.(from Orange in T01A case)
--------------------------------------------
This Pin method is short Pin 1 and Pin 2.
And, You can The power button pushed with the state maintained.
Then, Your T01A screen displays your ROM after five seconds.
--------------------------------------------
Did it work? If not, can you try as naxt.
Click to expand...
Click to collapse
Thanks for you quick reply friend. i have 2 news!!
1 - The good news, is the short Pin 1 and 2 work!!! phone is alive again thanks very much friend..
2 - Bad news, my last try i flash the T01A ROM, soo my phone is DOCOMO now, but in english, and the TG01TSS01.7z dont flash anymore, say File is invalid!!!
I un7zip and rename for TG01.enc, after copy to PRG folder (this work in first time, but dont work more, maybe because i flash T01A for last)
But i need short the pin 1 and 2 any time when reset right? Soo how i can puth the SIM card, without revome the batery and Short pins 1 and 2?
1
I finaly able to insert the SIM card to phone after short pin 1 and 2, but now WM ask me for a Password for unlock my SIM? have you any idea what is this? or any way for flash the TG01TSS01.7z again?
2 - Bad news, my last try i flash the T01A ROM, soo my phone is DOCOMO now, but in english, and the TG01TSS01.7z dont flash anymore, say File is invalid!!!
Click to expand...
Click to collapse
Is the bootlogo of your X02T docomo?
If yes, the Encryption of your device is tsd,
You can flash tsd ROM and can not flash tss ROM.
You can try T01A_to_SP50_wm65-theduyet.tsd ROM.(rename to TG01.enc)
And, is the Pin method both Docomo and Orange ROMs necessary for
your X02T?
If yes, We can not do anything. Because we only have bootloder of
TG01 and T01A, not have X02T.
Sorry.
I finaly able to insert the SIM card to phone after short pin 1 and 2, but now WM ask me for a Password for unlock my SIM? have you any idea what is this? or any way for flash the TG01TSS01.7z again?
Click to expand...
Click to collapse
You must be use SoftBank SIM, or delete SIMUnlockP.exe in windows folder.
yamadori said:
Is the bootlogo of your X02T docomo?
If yes, the Encryption of your device is tsd,
You can flash tsd ROM and can not flash tss ROM.
You can try T01A_to_SP50_wm65-theduyet.tsd ROM.(rename to TG01.enc)
And, is the Pin method both Docomo and Orange ROMs necessary for
your X02T?
If yes, We can not do anything. Because we only have bootloder of
TG01 and T01A, not have X02T.
Sorry.
You must be use SoftBank SIM, or delete SIMUnlockP.exe in windows folder.
Click to expand...
Click to collapse
Yes the bootlogo is DOCOMO and the T01A ROM work good, but i only can flash ROM with .tsd, when i try with .enc say invalid file.
i will try delete this file for skip the password.
i cant find SIMUnlockP.exe in windows folder, have another way for evade the password?
With my Hermer i have a program called "Connection Setup" for easy config the phone, i just choise japan and Vodafone, you know where i can find this program or another like this?
and if my phone now is tsd Encryption, why o still need short pin? if i rename the TSS file for tsd i can turn she back to SoftBank?
Thanks very mush...
eekthecat said:
i cant find SIMUnlockP.exe in windows folder, have another way for evade the password?
With my Hermer i have a program called "Connection Setup" for easy config the phone, i just choise japan and Vodafone, you know where i can find this program or another like this?
and if my phone now is tsd Encryption, why o still need short pin? if i rename the TSS file for tsd i can turn she back to SoftBank?
Thanks very mush...
Click to expand...
Click to collapse
It seems that you have flashed a english rom on X02T sucessfully.
Congratulations！
i cant find SIMUnlockP.exe in windows folder, have another way for evade the password?
Click to expand...
Click to collapse
Your X02T can use only softbank SIM, because we do not find
the method of X02T SIM unlock as well as T01A.
and if my phone now is tsd Encryption, why o still need short pin? if i rename the TSS file for tsd i can turn she back to SoftBank?
Click to expand...
Click to collapse
No. The bootloader of X02T is not the same as T01A it.
There is no ROM of X02T bootloader yet. Therefore, method of PIN(1&2) is needed in ROM of T01A and TG01 bootloader.
By the way,
I will pass you this ROM, because your device bootloader is docomo.
http://www.mediafire.com/?qmznk0ygzxj
This ROM might be able to use "X02T_from_SP00_to_01_000.tis", or not.
Please enjoy it.
Thanks very much friend, but i think the file is corrupted, i try download 3 times, and get a error when try un7zip. Could you upload the ROM again plz
Thanks very much friend, but i think the file is corrupted, i try download 3 times, and get a error when try un7zip. Could you upload the ROM again plz
Click to expand...
Click to collapse
Please delete Cash and do download again.
And, please do unzip by this tool http://www.7-zip.org/.
I can not upload it because I can't use Broadband today.
yamadori said:
Please delete Cash and do download again.
And, please do unzip by this tool http://www.7-zip.org/.
I can not upload it because I can't use Broadband today.
Click to expand...
Click to collapse
Cash is deleted, i try with another with IE, firefox and Freedownload manager, also use 7zip for unzip, but the file is realy corrupted.
Don't worry if you cant upload again today, i will wait thanks alot.
upload again.
http://www.mediafire.com/?rwnm2wzjrnj
yamadori said:
upload again.
http://www.mediafire.com/?rwnm2wzjrnj
Click to expand...
Click to collapse
Thanks for upload friend, now work fine, but i cant flash this ROM. SD Downloader say : File Open Error!!!
I copy to prg folder, and try with .enc and .tsd, but both get the same error.
I still can flash ROM's like " [ROM][ENG] 6.5.5 (23563)+Sense 2.5(2011) v0.012.2 (26/04/10) Radio 5005.1600.05" but my SIM Card is SoftBank and i think the ROM Radio another, because i cant connect with SoftBank services.
OBS: I use the Convetion too for convert TG01 rom to T01A ROM
Now i able to flash you ROM, just rename the file for TG01WP_00.tsd, this is with Docome bootlogo, with my SoftBank Japanese Windows, but my i still can't use my SIM Softbank, windows report a SIM error and the Windows power off after seconds.
If i start the phone without my SoftBank SIM, widows work fine (in japanese, and with DOCOMO bootlogo) but if i start with SIM card, windows report something about SIMUnlockP and dont connect, after secs power off.
If i can only flash ROMS with TSD, is because my bootloader is Docomo now right? this make my phone only work with DOCOMO SIM'S?
hi,eecat, I have the same problem as you. I flashed a chinese rom to x02t, with pin 1 and 2 shorted method, I can boot the phone, otherwise, green light sparkle once then off. after the Chinese wm65 started, I inserted the softbank sim card, no signal. I am wondering have you solved that problem or do you have any idea to flash back to official softbank rom that I can use softbank sim card as normal? your Prompt reply will be highly appriciated.
I have problem when i try to unpack boot.img from CM10.1.3 Stable version for I9100G.
I tried many time but It say can't find kernel or ramdisk.
Any body help me please?
Anybody help me please???????????????????????
Very few people post here these days, not even the mods seem to be around. If you want help with this, you're either going to have to be really patient (understatement, don't be surprised if you still don't have an answer in a week), or go ask in the CM discussion thread. Your question isn't exactly a 'Hlap mai fone borked ! Odin don't werk !' type query. There aren't many people who post to S2 forums anymore who can answer this type of question.
So you can either sit in this thread & not get the answers you're looking for, or you can be proactive & seek them out.
I tried to worked out with few boot images before. I dont know what is yours
can you upload it please.
If you have windows it will be easy for you to explore that image in hex editor
That what i know so far is. Open your image in hex editor and look for "error" phrase
and you will find several of that 'error' kernel error header error compression error
im my case it is last one before compressed file. You need to recognize magic of
compressed file it is just after 'error'
Ex.
for gzip is: 1F 8B 0B
for LZMA is: 5D 00 00 00 04 FF FF
you can look for that instead 'error' And then you need to cut of everything before
magic number. Make your file start of that magic number. If you do that you will be able to
decompress it. gunzip file.gz or unlzma file.lzma
or you can use your android to find archive in your boot.img
hexdump -C boot.img | grep '1f 0b 08'
and result is
000046b0 72 6f 72 00 1f 8b 08 00 00 00 00 00 02 03 ac bd |ror.............|
ant then you have hex address 46b0 witch is pointing on first byte of that line. Its 72
hex is not easy to count in your memory so we need to convert it to dec value
echo $((16#46b0))
result is
18096 but remember this addres is pointing on 72. We need address of next 4 byte 1f
so we need to count in a memory then. Addres of 1f is 18100
Its easy now. We need to extract archive from boot.img
dd if=boot.img of=archive.gz bs=18100 skip=1
And then decompress it. Thats not all it is just a clue i hope it will work out for you