hi everybody
Is there there anyone who can help fix my O2 xda?
The battery is not charging, It works with the direct line power, but reboot itself and I can't get the phone. I tried to flash it back receive GSM error message.
thank you!
I think you can just try this here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
Related
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seens to be broken...
It woked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Dear Fabi,
I know it might not be the suitable question, but could you plz tell the exact steps you did that led you to this situation. This is to allow you to get precise help, and to be a learned lesson for the rest of us, coz I was about to upgrade from 3.25 to 4.00.16 but prefered to ask first.
Don't worry, the guys here are way clever and I 'm sure you will get the help very soon ... TKR
Nooo problem. I was about to Sync my XDA via USB Cradle and noticed that my backlight was turned off. Also my Phone was searching for a Network (now I know why... :roll: ). So I thought it might be good to reset that thing..... *aghhhrrrr* That was a big mistake. After the reset I saw the boot screen and the backlight blinking twice. That was all. My Bootloader (5.15) says "GSM Error"... now I'm without Mobile Phone for a while :?
so in other words, 4.00.16 was OK but you screwed up the XDA by just doing a reset while the backlight was off ?? ... I 'm afraid I don't get it :?
Fabi said:
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seems to be broken...
It worked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Click to expand...
Click to collapse
Confirming you used the SD card method to upgrade, right!
Also what radio band is or was your XDA set to before the upgrade?
HTH
No I didn't use SD Card to update my XDA. I used The ROM-Kitchen to generate a exe and updated over USB cradle.
Im running my MDA (i don't have a XDA ) on a german GSM 1800. Eplus. It was always set to this option and I never even tried to change it.
@biso007:
I screwed my MDA because I did a reset. Thats right. But I had some backlight issues in the past few days after upgrading. The backlight sometimes turned off and there was no chance to get it back on... only a reset. I first thought the proplem occured again yesterday but then i saw that my MDA was looking for network. After resetting the GSM part was dead....!
So back to my problem. I now ordered a SD Card Reader/writer. Is it possible to resore my system via XDArit and a backup? Can someone provide me a working 2002 backup from boot, OS and GSM part? Or can I do this by myself. I really appreciate your help!! Thanks a lot.
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
and yes its possible to restore your system via XDArit and a backup.
As far a the 2002 PPCPE ROM goes you should be able to download it from T-Mobile, so visit their web site and search their MDA upgrade/download section.
HTH
Qman said:
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
HTH
Click to expand...
Click to collapse
My MDA does not boot anymore! I can't get into windows and i can't sync anymore! I have the Radiostack and the 2002 image fram the T-Mobile Website but the image ist a NK.nbf. AFAIK XDArit needs *.nb1 Files? I also noticed that it seems not possible to write the GSM Part to the phone via XDArit.
Hiya Folks
I wonder if you could helpme with a bit of a problem, i have recently attempted to upgrade my XDA using the reccommended downloads from O2, this upgraded my ROM and the GSM part of the XDA. however when trying to get into my XDA it freezes, i can get into the bootloader but get a GSM error, am i able to flash the GSM, if so where can i get the flash and how would i carry this out. i have got into the GSM part of the bootloader and the GSM will not turn on. i have tried copying the GSM from a friends XDA only to find the message "please connect to RS232 and run PC monitor now"
Hope you can help
Cheers guys, you are truly more useful than the folks who we obviously look up to at O2!!!! Mind you this does not say much!!
Thanks again
Dave
where can i find the wm 2003 upgrade file for qtek 1010
where can i find the wm 2003 upgrade file for qtek 1010.
plz can any body reply to me at [email protected]
i want to upgrade my qtek1010 2002 wm to 2003 but could not find it .
can any body reply to me at my email
I bought an O2 XDA-II only about a week ago, with the following ROM/Radio Versions:
1.60.00 - ROM Version
1.10.00 - Radio Version
Today, I tried upgrading the XDA with the latest ROM upgrade from o2 UK, 1.60.50, using a USB cradle. Unfortunately, the cradle wasnt connected to the power supply as required by the program, and at about 8%, I got a message saying that there has been an error and that I should start the process again. I did so, this time making sure the power supply was connected, but the same thing kept on happening again and again. I even tried to flash the XDA with the German ROM but the same error occured at the same place. Restarting my PC / reinstalling ActiveSync wasnt of any help either.
I now have a dead XDA-2 which just says "Serial" and "V 1.03" when I put it on the cradle. Any help on what I can do now will be greatly appreciated. Thanks
you could try and read this
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Rudegar said:
you could try and read this
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Click to expand...
Click to collapse
Thanks for the reply, but I dont think it would help me, as the site you quoted mentions that I need to copy some files onto my XDA and check the version, something that is not possible with my XDA being dead. I contacted O2 and they said that this looks like a warranty issue, but as I will not be back in the UK for the next couple of months, this puts me in a very tight spot. Has anyone else experienced similar problems with their XDA-II?
yes i did the same..... had to get mine replaced by O2
I upgraded a TMobile XDA1 got the main ROM upgrade then went and tried to upgrade the radio stack. As I see from the many posts a bad thing to do. But this leaves me with a broken unit. The radio was T310. I can not see how I can solve this problem. I have an SD card, I have a friends German unit with an ENG Rom and the orignal radio which I will leave alone. How can I fix mine?
Thanks
GSM error on Bootload 1.50
Looks pretty much the same as my problem. By pressing the joystick after the error message, I get one step further, but no contact or upload of the ROM. I hope some wise person can supply an answer, :roll:
I have the same problem...
XDA O2 on Wallaby BootLoader v5.15 I see the error : "GSM ERROR"
my pda don´t start good I only see the rom version (3.17.03) and a blue wallpaper of O2..
I already update my rom but it don´t work yet !
Where can I find a GSM rom update? I'm from Portugal
What more can I do ?
Please, help me !
thanks
Joao Afonso, from Portugal
GSM Error
I have tried a number of solutions. None seem to work. If someone has the GSM rom and a solution to upload it let us know. I have tried coping a new radio version to the windows dir on the PPC, this fails. I have removed the back cover and battery again this does not work. The only alternative is to send it back for repair (expensive) or get a new one. I have looked at the solutions in the forum area and on the web but can not find an answer. The unit is an old TMobile (GERMAN) Xda. Upgraded the OS OK then messed up the radio. So as I say let me know if someone has a proven solution. Thanks.
How to fix GSM Error Problem ....
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
Click to expand...
Click to collapse
GSM Error
Many thanks for the information. I have tried this but to sorry to say this does not work for me. I can get the RSUgrade.exe to load on the PDA, it stops at 1% and then hangs. The XDA was a TMobile GER unit with 32Mb. I have two units the same, I attempted to upgrade the radio on one and it failed at 10% rebooted and hung with GSM error. Since then I am at a loss as to the next step apart from throwing it in the bin.
same here
it always promt me failed flash device restart press ok. wat the hell is dis . does my gsm rom id basted?day i cant upgrde it tnx
Same problem..
.. and no solution for the GSM Error. There is no possibility to get a connect (O2 germany) and the RSU-Utility stops after 1% - always.
Please help!
Have you tried leaving it for 24 hours with the 1% on screen?
Flash failed
The problem is that there is a message "Flash failed - press ok to restart."
No possibility to leave the program..
same w u
ya i wish someone can find any sol 4 our prob. same problem w u guys.
Guys i need help, my wallaby is blinking, and no signal ,and then i did the hardreset, (push the on/off button and the reset button), and the message appear " WALLABY BOOTLOADER GSM ERROR", any suggestion
Thx
Hendra
dude, this is easily sorted! follow the instructions at:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
and make sure you download O2's : Radio_Stack_Upgrade_v421 because you cant download the :RSU Version 4.16 .
Good luck! Any probs just email me at [email protected]
Downloading RSU
Hi
I seem to have a problem in downloading the RSU upgrade. I had downloaded the RSU 4.16 from the site and tried running it from my SD card but it failed at 1% you say try loading rsuv421 where do I get it?? Will it solve my backlight problem and charging problem.What does the RSU do
Almaal
I tried to upgade my Atom to ....52 Radio version from ....49, using bootloader method. Here is screen from my bootloader :
Mot Sync ... Failed 0xFF -> Anyone face the same ????
Mot Sync ... OK
Normal mode always stuck in burning radio ( error connection )
Need it for getting my RF GSM signal back !
Appreciate all the comment and advice
Thank you
Also have the same issue with the atom I got. Tsk, anything else to do? I can't find the most clear answer. Can somebody direct us to it?
some years later
Some years has passed and am now having this issue...
any idea?
botuser said:
Also have the same issue with the atom I got. Tsk, anything else to do? I can't find the most clear answer. Can somebody direct us to it?
Click to expand...
Click to collapse