error: getconnectiontype - an existing connection was forcibly closed by the remote host. error getting connection type. this happens when i try to burn a new rom into the xda. i have been reading for the past 2 days to no avail. i even went and bought an sd r/w usb. the other issue is that no matter what i try, i can not get it to unlock the sim. my wife liked my ppc so i bought her one and i am trying to get it together for her for x-mas. i have the same prob with my xda as well/
here's the info one xda: two xda
att sx56 pw10b1 t-mobile sx56 pw10b1
rom 4.01.16 rom 4.01.16eng
radio 6.24.00 radio 6.02
protocol 324e4 protocol 324e4
thank you in advance
Same here
I too experience the same issue when attempting to flash the ROM on on my PW10b1. If anyone can provide insight, I would be very grateful.
Interestingly, I have the exact same configuration as the original post.
so did flashing using a sd card help ?
there are no tools to unlock sims cards the tools unlock the phone so it's not locked to a sim card
some sim cards are incompatible
about unlocking read here
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
http://forum.xda-developers.com/showthread.php?t=240784
Related
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Hmmm... have you read the Sticky thread on bricks? This sounds like a problem I have seen in there. Probably easy to fix - first try flashing back to where you started. Read through the sticky - it will help you.
http://forum.xda-developers.com/showthread.php?t=286755
How long ago did you flash? Did it never work after flashing or did it work for a day, a week...? Need more info. I assume you verified that the SIM isn't the problem?
yes i have read the brick thread and have tried flashing it again but it didn't seem to work. i've also re-did the radio ROM as well.
I flashed and upgraded to wm6 after the network problem and it still doesn't seem to work.
I don't think it's the sim problem as it works with my other phone SE k800i. But i'll try changing the sim card and get a new one on monday.
I'm leaving the option of sending it to Teleplan as a last resort as it is quite a hassle to send the dopod all the way to sydney when i'm situated in Perth.
Anyone know a service center for dopod in Perth?
dopod 838pro
i'm not sure but when i use my optus sim card, it seems to work. but not with my 3 sim card.
louiedafly said:
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Click to expand...
Click to collapse
Try starting up your phone with no sim card and see what happens, I think have the same problem, I can't use any other radio than 1.16, and even that may have problems. If I use any other radio roms, I get no service, and if I take out my sim, it doesnt even realize that there is no sim, it says no service, and also the phone will freeze on the today screen with half the plugins loaded.
BTW what radio are you using?
I get the same error with my 3 sim and the .41 radio rom.
I got a Wallaby PW10B1 from my friend.
The original ROM version is 4.01.16, but doesn't work.
When I downgrade it to 3.17.03 or special_rom_1.2, the PDA part works, but there is no phone signal.
I also tried some other WM2003 version rom, all of them don't work, which I saw a T-mobile screen and can't go further.
Could you guys help me to figure out the problem?
Thanks!
Where are you located?
PW10B uses 900/1900 MHz gsm networks.... Maybe this causes your problems with the signal.
Stefan
LumpiStefan said:
Where are you located?
PW10B uses 900/1900 MHz gsm networks.... Maybe this causes your problems with the signal.
Stefan
Click to expand...
Click to collapse
Thanks for your reply. I'm in State College, PA, and have no idea which frequency Cingular is using here. I went to Cingular Store here, and put one of their SIM card in my phone, but there is still no signal.
I noticed another thing, with most PocketPC 2002 BIOS, my device is recognized as PW10A1, but on the back it's PW10B1. I tried couple of WM2003 ROM, none of them is working (can't enter the PDA OS, system will hung there after the logo is showed)
Do you guys have any idea what kind of problem it could be?
radio stack
rember i had same sort of problem try changing the radio stack don't use the 4.16 i could not get it to work
i think you have the same problem like me? yesterday, my xda is almost like your pda, but, i can found and fixed my xda and mr.stefan also help me just look in my title : " my Siemens SX65 AT&T wirelles No signal " maybe it can help you.
gohengky said:
i think you have the same problem like me? yesterday, my xda is almost like your pda, but, i can found and fixed my xda and mr.stefan also help me just look in my title : " my Siemens SX65 AT&T wirelles No signal " maybe it can help you.
Click to expand...
Click to collapse
Thanks man! I will look at it.
Here's What You Need To Do . . .
Hi, bryt.
From the information you have provided, it appears as though you have an incorrect ROM image loaded on your XDA. The PW10B1 will adopt the personality of a PW10A1 if the ROM image for a PW10A1 is loaded onto it. However, this will not make a PW10B1 function as a PW10A1.
The biggest drawback of having the wrong ROM image loaded on your XDA is that you cannot apply the OEM ROM updates that were originally supplied by A.T.& T. Wirelese and Siemens. The reason these OEM ROM images won't load is because they actually do some device validation before loading. Originally implemented as a safety precaution, these device validation routines have become a hinderance because they prevent you from forcing a ROM update to correct a previous bad ROM update. There is good news though . . .
The PW10B1 has a mode that allows byte copying a ROM image directly from a flash card to the XDA ROM. I have converted the Siemens OEM Windows Mobile 2003 Update to a flash-writable nk.nb1 image file that can be written to a Secure Digital (SD) flash card and then force-loaded onto the PW10B1.
I developed this process after loading an undesirable ROM image on my PW10B1 in order to unlock it, which was successful. But, then I had a terrible time getting the OEM Windows Mobile 2003 Update back on the XDA.
I make the OEM installer version of the Windows Mobile 2003 Update available on my web-site. I do not offer the flash-loadable version on my web-site though. If you are interested in having the flash-loadable version of the OEM Windows Mobile 2003 Update, let me know and I will place it on my web-site and send you a link. The file is 32MB uncompressed and about half that size compressed, so I will probably put it on the web-site as a .zip file if you decide that you would like it.
Good luck!
Lisa
Hello guys. I´m kind of new to this forum and also to the hermes mobile device. I got a TyTn and i flashed it with the Shaps 3.60 ROM
My first question, witch might be stupind enough, is what does the radio do? i´ve seen some posts about upgrading the radio version and I would like to know what exactly this thing envolves and how do I chose the best radio version to fit my device. Does it depend on the network operator, or the services I´m using?
Second question is that after installing the new Shaps ROM my TyTn gives me a warning message saying that it wasn´t able to obtain an automatic IP and to check my Connection Settings. The IP asigned is from the same class as the one from my PC. Before installing the ROM it worked, now i can´t surf on the net through ActiveSync. Besides that, how can i use my PC as a wireless server for my TyTn? my device connects with the PC but the IP class is different.
Please help
Check the wika-wika-WIKI!
mcorrie1121 said:
Check the wika-wika-WIKI!
Click to expand...
Click to collapse
i've read that topic, but still need a recommendation for a radio update. Anyone can help me chose the best radio update? Orange carrier, Romania
Hey,
I was given a Softbank X01HT from my brother and I've been using the information on this site to try and get the phone up and working on the Three network in Australia. This site has been really informative and I managed to do a lot of upgrades to my phone and everything works fine except that I get "no service" when I put my Three sim card into the phone. Could someone please help me work out what's wrong with my phone?
Here are the details of my phone:
Device: Softbank X01HT (Black one don't know how old)
IPL-1.04
SPL-2.10.Olipro
ROM Version: CRCs r13.3
Radio Version: 1.47.30.19
I've done the following:
Upgrade to hard SPL (first thing I did)
Run the Hermes_SIM_CID_Unlock_v3a (Though now I have doubts that I did it right)
Installed various rom (mostly for fun)
Installed Josh V15 Manila 2D rom
Installed the dopod AUS 3network WM6 (I thought it would have the right radio and settings)
Installed the CRC rom (I didn't like the dopod rom)
Any help would be appreciated. I've been searching but I couldn't find a good answer.
I'm not very familiar with that phone but you'll need to create a new data connection so that it can connect to 3.
When creating one, make sure you select the data connection type as GPRS, 3G etc, the access point is called 3services, no username or password is required. Should be good from then on.
These forums are awesome, with a bit more patience and perserverance I finally got my phone to work.
I did more searching on the X01HT and found that people were using the radio rom from pof's SIM & CID Unlocker. There was talk about cooking roms and stuff which I didn't want to try, so I decided to just run through the unlocker again. I made sure that I turned off my phone for 10 secs at the end and do a soft reset after the 10 secs, as I was a bit careless with that part last time.
After getting through all the steps, the phone recognised my sim and configured my phone for the three network. I can now connect to the net and make phone calls.
Now the details of my phone are:
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
ROM version: CRC r13.3
Radio version: 1.16.00.00
Thanks guys for running this site. I reckon i'll be on these forums a lot in the next few months. There's still a lot of tweaks I want to do to my phone.
Mate, bit of advice, install Hard SPL V7 so there are no "accidents" when flashing a new rom... Its a bit better at protecting your Hermes when you flash than 1.40. Thats an older version of Hard SPL.
Cheers...
Well,
recently I've bought 8525.
But I live outside US so i needed to unlock my device.
I've downloaded "HTC_Hermes_SIM_CID_Unlock_v3a"
and have flashed my 8525 using an microSD card.
Everything went OK, then after flashing I've launched unlocker .exe. on my device and ulocked SIM and CID.
Then I've placed my SIM-card but it won't search for any network (It continues to search and search.
What should I do in this matter?
I'm running MS Vista, so I'd be glad if U suggest me to flash using an micriSD card.
Thanks.
Please help me to get out of this case.
Edit:
I've just flashed radio 1.54.30.10 using SPL 1.40 Olipro, IPL 1.1
with no luck at all.
Help me somebody.
Still searchs and searchs network, but doesn't register on network.
Same problem (NO GSM) I'm Vietnam !
I Have same problem ! now i flashed SPL-2.10.olipro and try again with Unlock v3.exe but not progress !And i check my phone at Device Infor i cannot see IMEI (IMEI: [Emty])
AT&T 8525
I have same problem no radio no gsm no imei, try everything still same result. Can anybody help.
ONLY thing to try is to either install ORIGINAL SHIPPED STOCK ROM or the ORIGINAL SHIPPED RADIO ROM. Doing anything else may permanently brick your device. This is not guaranteed to work as the radio rom is a cantankerous SOB and seems to be the achilles heel of the Hermes. In laymen's terms, radio dead, not recoverable in most cases...
Good luck...
I'm not saying its impossible but then I believe if you jump off a cliff and try REALLY hard you might actually miss the ground...