Just wanted to share with everyone.
I've had the Krusell Handit Multidapt® Case for a week now.
http://www.krusell.se/product.php?productID=1816&category=16
I have tried about 3-4 cases (through the company supplier ) and I have been disappointed as many times, as they are usually bulky, hard to take off, too big, or plain and simple unusable!
This case is beautiful:
* Easy to put on and take off
* Very light and not bulky at all
* Unit is actually usable when in case
It's around 50$AU from expansys.com.au and I would highly recommend it.
Wow, that one is NICE! I wonder if I can get it in the US some how....
Edit:
Found it and ordered it!
Direct Link
I uses piel frama it is the same but a little bit more slim .
I thought the Krussell was a little bulky also. The case from Sena allows the device to be cradled.
http://www.senacases.com/cart/home.php?cat=339
I bought that case off eBay about a year ago for my SX66 -- IIRC, I paid less than $25 for it. It's held up very well over the months.
Is there clear plastic over the keyboard?
Yes, there is clear plastic over the keyboard.
i have been using this case since day 1.
I am using Krusell Multidapt leather case. It prevents you from flip opening the front cover while calling. It is a good case.
Can it prevent the edge or side of my sx66 from scratching?
odie3 said:
Yes, there is clear plastic over the keyboard.
Click to expand...
Click to collapse
For me the best case that i found is the Brando Leather Case it protects all around the Qtek XDA IIs and i can use the keyboard and with it closed i can accept incomin calls !!
See it at http://shop.brando.com.hk/bwxdaIIsleatherhardcase.php
Bought it At Ebay !!
how is the piel frama case designed?
must it go between the gap of the monitor and the keyboard?
if it is so designed, will it not make the screen slider loose? anyone?
did anyone used a vertical wallet case type before? does it fits the phone good? like the one in http://www.krusell.se/productUni.php?productID=1756&category=33
I am confused, which case to get for my xda2s.
Related
The case that comes with the K-Jam isnt as small as it could be so I would like to get a case that is a little more form fitting.
Has anyone looked at the leather case that pdair.com has for the k-Jam/wizard? I cant tell how it attaches to the K-Jam but I think its got a clear plastic sheet that fits in between the screen and keyboard and covers the keyboard. That is why I am reluctant to buy case. I had something like that for my PDA2K and I didnt like the plastic sheet in between keyboard and screen. It seemed that the screen would not slide so easily before using the case and afterwards the screen seemed to be loose and slide to easily. I dont want to mess up the tight feel of the screen / keyboard on this one.
If you know anything about this case or any other please post a response.
Darrin
I am thinking of getting one of the cases on theis page: www.krusell.se. I like the Horizontic style. The cases are shown under the ETEN m500 size but the m500 and K-Jam are about the same size.
The Krusell cases are well made and fit well, but they are not smaller than the stock cases.
Look http://www.krusell.se/product.php?productID=2089&category=16 or http://www.krusell.se/product.php?productID=2128&category=42 although the pdair and piel frama are the only ones that allow you to use the keyboard whilst in the case. I have the pdair.com one and it fits my needs (I am able to use the keybaord quite effectively with the plastic cover (it doesn't cover all of it); I have had the plastic 'crumple' a few times but this minor problem is more than outweighed by the benefits.
these flip cases look quite good
http://www.mobilefun.co.uk/product/8458.htm
I got the Proporta Alu leather case and it is very nice and allows keyboard usage.
zaki67 said:
I got the Proporta Alu leather case and it is very nice and allows keyboard usage.
Click to expand...
Click to collapse
It looks almost identical to the PDAir one. Nice aluminium insert which works with their magnetic car holder. Since when did aluminium react to magnetism??? (I know the probably have a thin magnet insert btw)
Hello,
These cases are also compatible with HTC Wizard:
http://www.expansys.pt/product.asp?code=124376
http://www.expansys.pt/product.asp?code=123697
Anyone has one of them?
Cheers,
Francisco Teixeira
Krusell the way forward...
Krusell is the way forward, with the multidapt clip of course...
http://www.krusell.se/product.php?productID=2089&category
Look on EBay for best prices :wink:
mcwarre said:
zaki67 said:
I got the Proporta Alu leather case and it is very nice and allows keyboard usage.
Click to expand...
Click to collapse
It looks almost identical to the PDAir one. Nice aluminium insert which works with their magnetic car holder. Since when did aluminium react to magnetism??? (I know the probably have a thin magnet insert btw)
Click to expand...
Click to collapse
Do you have the book style (landscape-opening) or the flip style (portrait opening) model?
You don't find any problem with opening and closing the keyboard, with that plastic insert?
I've had the PDAir leather case (flip format -- hinge on the bottom) for several weeks now -- it works pretty well for the most part. It's a bit tricky putting the Wizard in the case; the plastic bit that fits between the keyboard & LCD has a Velcro bit on the end that's a bit thick for the space provided. Said Velcro piece attaches to the case via a tab that folds up over the right side, between the camera button & IR port -- unfortunately it covers the reset hole.
The case is a bit loose-fitting, which probably can't be fixed without sacrificing the ability to deploy the keyboard; AFAIK, it's the only case that lets you use the keyboard without removing the Wizard from the case. It's not as good as the Krusell I used with my BlueAngel, but it's good enough.
I got the monaco leather case for the 8125 from Extreme PDA:
http://www.extremepda.com/page/XPDA/PROD/cingular_8125_accessories/CING8125FLIPCASE
Even though a lot of people said they liked it and it seemed to be the most ideal for constant use, the bottom line is after a week I can't stand having it on my 8125. Here's what I realized:
- Even though it allows the keyboard to slide out, actually holding the device with the case flip behind it makes it tough to type comfortably.
- Folding back the flip every time I get a phone call and securing it in place is not practical.
- The cover inadvertantly causes the phone to either ignore or answer calls by applying pressure on the dial/hangup buttons. While this isn't an issue if the device is in standy, on an incoming call it is. Locking the device is useless because on an incoming call, the phone buttons are unlocked even if the device itself is locked.
After a week of this I finally gave up and took the 8125 out of the leather case. I am worried about it getting dropped/scratched but I just can't find a solution that's practical enough. How are the rest of you dealing with these issues?
yeah most people forget that it's a phone too and not just a pda. so having it in a case like that just makes it more work to answer calls and use the device.
I'm using the Mobile Glove Executice Black Tie Series holder. its a better design than the free case that comes with the 8125. The flap has a magnet in it so it closes really good. I bought it at a mall stand for $30 http://www.mobileglove.com/mobileglove.html it's design for the Treo 650 and similar handheld devices. it fits perfect
I purchased this case and am very happy with it. I don't experience any of the issues described by devGOD. http://cgi.ebay.com/Deluxe-Leather-...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've bought items from this person for other PDAs and highly recommend him. He also has some other cases for the 8125 available.
Geoffrey
Leather Cases
Hi there. The case listed above was my third case for the 8125. So far I like it the most. This is why I am still looking for a case. Taking it off and putting it on the belt clip is somewhat of a hassle because of the placement of the snap that keeps the thing closed. It gets in the way and it's making it hard to grab the phone in time to answer the ring. Also, using the keyboard is a little akward while it's in the case. Just take it out when at home but when out and about it gets a little tedious.
My next purchase might be the holster but at $30 it's a bit pricy.
Case to consider: Krusell Cabriolet
Here is what fit the bill for me.
http://sfplanet.com/product/87182
Use the phone/screen without any flaps. If you need to use the keyboard, it slides out easily. However, you can shake it upside down and it will stay put.
Krusell offers many choices for additional adaptors to fit your lifestyle. I bought and use their: Carabiner & Swivel Lanyard. I do like the belt clip one it came with - it is the easiest to remove that I've tried, but I don't like extra baggage around the waist.
Here is a link to a website that reviewed 8 cases.
http://www.4winmobile.com/htc-wizard-7-case-shootout-review-conclusion-vt1707.html
I'll look at one of those "deluxe leather cases" on ebay next. Just got a black metal PDAair case off ebay, trying it out. It's ok so far, not sure if it's a keeper. I'm used to having a metal case on my PDA, but I don't usually carry my PDA on my belt, so I'm not sure if I'll stick with it or go leather. I actually started to like the OEM pouch while I used it, but I want constant protection.
Has anyone tried the following case?
http://cgi.ebay.com/T-Mobile-MDA-PD...8QQihZ015QQcategoryZ15036QQrdZ1QQcmdZViewItem
out of my research, i'm beginning to believe that the case that offers the most protection, AND easy usage without much dabbling every time the phone rings seems to be:
http://cgi.ebay.com/Deluxe-Leather-...4QQihZ010QQcategoryZ15036QQrdZ1QQcmdZViewItem
can anybody post saying otherwise? I'm curious to see if anybody has tried it.
I wish those had black stitching, but that case is most likely my next canidate if I try another one.
My black pdair metal case is doing ok, though I had my first drop today, the stupid stud unscrewed from the back of the case. I was kind of worried about that when I got it, the screw was awfully shallow.
The best case is no case
Hi there:
I read the 8 case review and, after doing so, I purchased the Noreve model. It is a beautiful case. The problem is, for me, that I use my 8125 primarily as a phone, and then as a PDA. I also use it a fair amount with a GPS device. For the phone, I find it most useful OUT of the case. Or, sometimes, when it is in my car holder, it is also out of the case. When using GPS, it is out of the case (but secure).
The Noreve is beautifully made, but the 8125 inside of it is like a brick. I find it 'geeky' to use the case with the phone. In fairness, what I like about the Noreve is that the case folds BEHIND the unit when you are talking and therefore does not hang down like a big dog's tongue. You can also use the keyboard in the Noreve, but the device is not that securely inside of it.
The case I use almost everyday is a case I found on eBay. I prefer the horizontal case, although I believe there is a vertical model. It covers the device well enough, has holes for you to push the device out of the case while on your belt when the phone rings, and then allows you to easily slide the phone back in. The belt is secure, and it is fairly light weight. I used to carry my old iPaq in my suit pocket. The 8125 is just too heavy; it works much better on the waist.
It is cheap but durable and it works!
http://cgi.ebay.ca/Cingular-8125-Po...2766581QQihZ014QQcategoryZ15036QQcmdZViewItem
Oh, BTW, that deluxe case is the same case Brando has.
http://shop.brando.com.hk/bwdopod838leathercase.php
i ordered mine tonight. Given the insane amount of research ive done, i'm definitely sure this one is going to be the one with the least amount of risk to try. I'll let you guys know when all is said and done.
Lex, I know what you mean about spending insanely long hours researching cases, as I just went through it. In a fashion uncharacteric of the way I usually work, I ended up buying four cases: Sena Form-fit, Krusell Cabriolet, Krusell Handit, and Piel Frama. The latter is the model with the strap that allows using the keyboard without removal from the case.
I read the 8-case review over and over, and still couldn't decide. The Krusells were cheap, so I bought two on Ebay for a total of $40. I found the Piel Frama on Ebay for $50. I decided to keep the Piel Frama and Handit. Here are some observations:
Sena Form-fit: Very well-made, but has one big flaw: The magnetic closure, which otherwise I like very much, causes the device to fall out if the case is inverted on the clip. In the first week the MDA fell out twice with no damage, so I sold the case. Also, the belt clip was backordered for a month, and I don't know if that has been rectified.
Krusell Cabriolet: Okay, but leaves screen pointing outward and unprotected; same for top. With the swivel clip I was worried it would fall out like with the Sena issue above. I was nervous using it, so I returned it.
Krusell Handit: Nice, inexpensive, well-designed, and no big flaws. I'm keeping it. I would recommend this one for an expensive case that works very well and looks good, but the keyboard is not accessible without removing the device. The swivel belt clip sticks out a bit and flops around on your belt, which is a minor irritant.
Piel Frama: Well-made, very nice looking and stylish, and another keeper. This will be my main case, but it has some flaws, too:
1. The card slots are directly over the screen (no problems so far). A moderate blow might cause the cards to touch the screen, but I'm not sure if that's a real concern.
2. The flip tends to trip the top-front buttons, but I usually put my device in standby before closing the flip, so this isn't usually a problem.
3. Earpiece connector is difficult to negotiate. The hole doesn't line up precisely and the flip is hard to snap when it is inserted. This isn't a major problem.
Virtues include accessibility to the keyboard by just removing a small strap. Best looking case I've seen.
I've decided there is no perfect case, and the only way to determine which is best for you is spend two weeks researching like I did. The 8-case review previously cited is a good start, and if you want a Krusell or Piel Frama keep an eye out on Ebay. The Piel Framas are hard to find, and from the manufacturers site in Europe they are $75, but show up on Ebay from time to time. I was emailed last week with an offer for one like mine from an Ebay seller for only $46 shipped, so if anyone wants a Piel Frama with the strap, let me know. It may still be available.[/b]
I found one on eBay, and I know a few people here have bought cases from the same seller. I'm just wondering about the practicality of the cover flap (see attachment) that hangs down during phone calls. Probably a shallow question, but I dunno how tough the leather might be; is it easy enough to fold the flap over, or do you guys just leave it hanging down?
you just leave it hanging down....
A top flip would be better?
Here's my venture into cheap ebay cases ..
HERE
Hi,
I bought a Krussell case from first2save on Ebay and am very impressed with it... I also have a horizontal case from the seller you mention but was never happy with the belt clip.
Regards,
fM
leather case
The beauty with the Leather case with flip is that it virtually eliminates the annoying mis dialing so easy on the HTC HD as the case has a hard protector that makes it touch proof
I have a Krusell Orbit Flex from which you can remove the lid; works perfect
I have been searching online retailers and local shops for a leather case for my Touch HD but to no avail, until I have found this in one of the mall in the Philippines while on holiday. I believe this is one of the best genuine leather case available for the HD regardless of the price. The best part of it is the price: Only USD15.00
The leather is not stiff but smooth and soft. The stitching is very well done. All phone controls and buttons are all accessible.
Check out the pix to have an idea how amazing this leather case is.
The pictures does not include the belt clip which also serves as headset/headphone cable organizer. Very, very neat!
looks good, do you know who manufactured it?
MarcusB63 said:
looks good, do you know who manufactured it?
Click to expand...
Click to collapse
It's Capdase. They actually have cases for all other phones including, iphone, blackberries. I actually bought similar cases too for my Blackeberry bold and Nokia 5800.
I'm wondering whether this leather case could be made compatible with Krusell's Multidapt mounting system, so it could be used with their car and bike holder kits. Could you maybe give me the exact dimensions of the swivel thingy that I suppose gets screwed in the back of the case?
Here's the corresponding Krusell data:
outside-diameter (top 2mm): 12,5mm
outside-diameter (lower 2mm): ca 9,5mm
inside-diameter: 7mm
also, do you know what kind of screw is used?
here's a pic of the krusell belt kit (the swivel thingy I'm talking about is obviously the second from the left):
Whoooa! The last pic, where it shows th case being used as a stand raises it's value a lot
Where can we buy this product ??
it's very usefull
rvv said:
I have been searching online retailers and local shops for a leather case for my Touch HD but to no avail, until I have found this in one of the mall in the Philippines while on holiday. I believe this is one of the best genuine leather case available for the HD regardless of the price. The best part of it is the price: Only USD15.00
The leather is not stiff but smooth and soft. The stitching is very well done. All phone controls and buttons are all accessible.
Check out the pix to have an idea how amazing this leather case is.
The pictures does not include the belt clip which also serves as headset/headphone cable organizer. Very, very neat!
Click to expand...
Click to collapse
Very nice!
Could you make a picture of the thickness with the HD inside it? and one with the belt clip?
witm01 said:
I'm wondering whether this leather case could be made compatible with Krusell's Multidapt mounting system, so it could be used with their car and bike holder kits. Could you maybe give me the exact dimensions of the swivel thingy that I suppose gets screwed in the back of the case?
Here's the corresponding Krusell data:
outside-diameter (top 2mm): 12,5mm
outside-diameter (lower 2mm): ca 9,5mm
inside-diameter: 7mm
also, do you know what kind of screw is used?
here's a pic of the krusell belt kit (the swivel thingy I'm talking about is obviously the second from the left):
Click to expand...
Click to collapse
I believe it will not be compatible. I am at work now, I will post additional pictures with belt clip on and the screw itself. I have had Krussel before but it is not as well designed as the belt clip that comes with this Capdase case.
gdiax said:
Where can we buy this product ??
it's very usefull
Click to expand...
Click to collapse
I bought this in a mall in the Manila, Phils. I have search the web but it is not available. Maybe you could try search "Capdase" in Ebay. Even in Manila, it is not readily available in most shops, you really have to ask for it.
Imperium said:
Very nice!
Could you make a picture of the thickness with the HD inside it? and one with the belt clip?
Click to expand...
Click to collapse
I will try to post additional pictures when I get off from work. But I can assure that it still fits my front pocket comfortable without looking happy to see everybody ....I never use the belt clip and screw so that's helped a lot in terms of pocketability.
has anybody bought one of these? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=360140956080
i was thinking about it for my hd.
I got this one from Amazon: http://www.amazon.de/Edel-Handytasc...=sr_1_3?ie=UTF8&s=ce-de&qid=1239309323&sr=1-3
Really strong leather which protects the screen and easy to get out.
http://www.amazon.de/s/ref=nb_ss_ce...lectronics&field-keywords=HTC+Bugatti&x=0&y=0
pg2005 said:
I got this one from Amazon: http://www.amazon.de/Edel-Handytasc...=sr_1_3?ie=UTF8&s=ce-de&qid=1239309323&sr=1-3
Click to expand...
Click to collapse
That's a great one at great price too. I think I've overpaid for my Noreve case and it took them a month to deliver
I use a simple leather case to protect my HD. Bought on ebay where you also get a screen protector with it what is much better than the original one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=400015202575
DRTigerlilly said:
has anybody bought one of these? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=360140956080
i was thinking about it for my hd.
Click to expand...
Click to collapse
Did you get one? That looks sweet!
easyriider said:
I use a simple leather case to protect my HD. Bought on ebay where you also get a screen protector with it what is much better than the original one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=400015202575
Click to expand...
Click to collapse
Have you tried the case? It looks great!
Just ordered one of these.
Hiya guys. Just received my phone today.
I have ordered one of these Beyza SlimLine Leather Pouch Case.
Has anyone had one of these before, and what was their view of it?
Looking for a slim (protective) case, whether it be silicone or leather, pouch or flip-case, so that I can carry the phone in my jeans pocket.
pg2005 said:
I got this one from Amazon: http://www.amazon.de/Edel-Handytasc...=sr_1_3?ie=UTF8&s=ce-de&qid=1239309323&sr=1-3
Really strong leather which protects the screen and easy to get out.
http://www.amazon.de/s/ref=nb_ss_ce...lectronics&field-keywords=HTC+Bugatti&x=0&y=0
Click to expand...
Click to collapse
I'd support that. Got the Bugatti SlimCase two weeks ago, and I'm quite satisfied with it.
PROs:
- Sturdy, quality leather case, offers good protection for the HD.
- Fixed belt loop. (yes there is a belt loop on the back - hard to see on some pictures). No clip that can accidentally slip off your belt.
- Slim fit: The HD's a slim device, and this case doesn't add bulk to it. Sits tightly against the belt, so no bulge at your waist. Comfortable to wear even under a business suit.
- velcro fastening: No chance of the HD accidentally slipping out of the case.
- Good fit around device: The HD fits in just right, and it's not too tight (so no unnecessary pressure on the screen).
- EasyOut strip, really easy to operate: Undo the velcro and pull the strip in one movement - hey presto, the HD is lifted about 1/3 out of the case. Couldn't be easier.
CON:
- Putting the HD back into the case is a bit more fiddly: The EasyOut strip gets in the way, or gets twisted. Not easy to do with one hand.
Overall, a really good belt-able case, and a real bargain too.
(I got mine from Amazon for ~ 10 € incl. P&P!!!!)
N.
You got to watch out for some of those cases on Ebay. I bought one for my X1i when I had it and because it was kinda tight ( needed breaking in ) it wore the paint down on an edge near the control panel. It was felt lined but the outer shell felt more like synthetic leather.
Krussel case here because of the quality and the Multidapt system, my last five cases have been Krussel so I have all the belt clips, windshield brackets etc. already.
Does anybody know if there'll be a pouch for the diamond 2 like for the diamond? Or simply will the Diamond pouch fit the diamond 2?
the diamond 1 pouch does not fit the d2
Don't think there is an official pouch, pdair have quite a few different ones available tho.
G
If you look at the Tracy & Matt unboxing video, its shows an HTC Pouch in the box. However, everyone so far has said it doesn't come in the box. Conclusion? I think there is/will be one, but it will a separate purchase like the with the D1.
I've been looking at the Beyza pouch for the Samsung Pixon. The Pixon has identical size stats to the D2 (well its 1mm wider), so if its just a pouch you are after, that may fit the bill.
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
galvinize said:
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
Click to expand...
Click to collapse
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Not sure how long delivery will take but will do when I get it.
Horizontal Pouch, HTC Brand
I bought this one: http://www.negrielectronics.com/touch-diamond-leather-pouch-p-2424.html
It is a Velcro closure and the phone does not fit well. further, it does not have a hard side to protect the touch screen. I assume this is a general case by HTC. I bought this, but I will probably continue to use the case from my Trinity, the fit is the same but this at least has some protection on the sides.
In a word, Disappointed. I am not sure why they skipped the case, and then fail to offer a decent one at launch time.
http://www.noreve.com/index.php
Looks like Noreve are going to do one too. Expensive, but nice, classy cases. See upcoming products at bottom of web page.
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Just be aware of these pouches
I did not get one with this or the TD1 ... with the TD1, the original one went on stock very quickly and I bought it for almost £10!
While the fitting was slim and snug, I couldn't help thinking that the tight fit had potentially caused light scratches on the rear (front I was not bothered as it had the protector on)
On the day I sold it, I did a very intensive clean on it and noticed there were indeed scratches that corrosponded with the pouch.
It only takes a small bit to be trapped in the pouch - you then slide the TD1 in and that bit goes down with it
I still don't know however what I want for my TD1, at the moment, I am using the original Ipod velour case that was bundled with I think the original 20gb ipods!
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-flip-top-_p04094c1213d039.html
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-pouch-type-_p04093c1213d039.html
or Krusell Luna fit
hsukirk said:
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Click to expand...
Click to collapse
is it possible to buy these pouches any where, as i personally like these the best
da_daman said:
is it possible to buy these pouches any where, as i personally like these the best
Click to expand...
Click to collapse
Yes, I prefer this pouch too. Unfortunately the HTC designation of that pouch is not mentioned on their website (i.e. the HTC PO S390 as for the D1), so a purchase seems to be tricky....
I just bought this http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=360151845729 since i want as thin as possible.
This isn't going to appeal to everyone since they aren't bargin basement cheap but I've just got one of these cases delivered this morning. I went for Nappa cowhide black B on the outside and red suede leather for the lining with no belt clip attached and hidden magnet closure. The case itself looks fantastic, stiching quality is excellent (not a loose piece of thread visible anywhere) and overall protection where its needed the most (on the screen) is hard to beat with the wrap over flap on the front. It took a couple of weeks from order to delivery, but for a case which is made to your own specification, right down to having your name embossed on the front, that isn't bad. If you want a quality product made to you want it, and personalised, give them a go, I'd definitely recommend them. They do a range of different styles so if a fold over horizontal pouch isn't to your liking have a look at the other options.
Nice, i just orderd one too
Nice cases, not cheap although they look very nice...
I have found my HTC Kaiser case that came with phone and I'll use that until something better comes along.
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Got the case yesterday, it adds quite a bit of bulk so if you're looking for a really slim fit then look elsewhere, other than that it is of good quality and has a nice professional look about it so is ideal for work. It also offers lots of protection for the device.
G
@galvinize: is it possible to take the belt clip off? doesnt look like in promo pictures - but in yours.
edit: could you please take a picture with the front up - or is it just a sliding case?