Innopocket Magnum Case
How does it handle in daily use?
Does it support an extended battery?
I'm using the Brando hardcase and it's been good, but after a couple of drops the corners of my BA are a little dinged up since there is no corner protection.
Thanks!
Tikerz said:
Innopocket Magnum Case
How does it handle in daily use?
Does it support an extended battery?
I'm using the Brando hardcase and it's been good, but after a couple of drops the corners of my BA are a little dinged up since there is no corner protection.
Thanks!
Click to expand...
Click to collapse
I am on my second one. The first broke within a month and was replaced by the dealer. The side clamps that hold the case closed are not well made. Even a small drop will cause the springs in the clamp to pop out or the entire clamp comes out. I have spent a lot of time searching around on the ground for all the pieces after the clamps falls apart. Sometimes the clamp comes loose for no reason. You will be walking and your PDA falls out of the case. I was told that I probably just had a faulty case and they sent me another one. The clamps look the same so I figure the same thing will happen. The aluminium case locks with a different mechanism and works much better.
I have a magnum
As far as cases go it's the bet i've owned. Better than the tinny metal ones. The only reason my BA works is thanks to this case.
I'd reccomend it
Since reveiving the second case I havn't had any problems. I think I just had a lemon the first time.
does this really protect the device in some cases of accident drop. Hows the the feel of the case?
Tikerz said:
Does it support an extended battery?
Click to expand...
Click to collapse
Can you get an extended battery for the BA? Got a link for it?
Yes on e-bay but I have heard some horror stories about them so be careful.
murduck said:
does this really protect the device in some cases of accident drop. Hows the the feel of the case?
Click to expand...
Click to collapse
Yes it really does protect the phone. I have dropped mine twice with this case and there was no damage to the phone at all. It did pop out of the case once though.
I have not had any issues with this case untill the threads on the post wore out and the case started falling due to that. I was not happy with the way they put the post on the cases. but it has lasted longer and functions better than any other case I have owned for my SX66 so I would buy another.
I have this case, but I prefer to use the original Siemens case, for the sole reason of ergonomics.
The Blue Angel is a sleek, sexy piece of art (all compacted into a phone), and to hide it in a bulky titanium case just doesn't seem right to me. Also, you cant use the touch screen and using the call/end and D-Pad buttons is a clumsy task with the innopocket case. I'd recommend getting a nice leather folder type case or an OEM style Siemens case.
However, the Innopocket case is GREAT when you use the phone as a GPS. Just attach the car mount to the back, and it protects the phone from hitting the windshield and dashboard while driving down a bumpy road.
I bought on eBay and I can't use it !
If I put my sx66 in the case it will push the button and other than that I can't close securely. I'm very dissapointed with the quality.
So please don't buy it !
I've had a few. Both the Titanium and Black Magnesium.
Also I've owned these for 4 different PDA models. After a few falls The Titanium will actually Dent in and itself leave a scratch on your PDA. The Magnesium doesn't dent in and is the one I currently use. The black case also compliments the silver PDA's color very well. Both will Pop open on a fall sometimes leaving your machine vulnerable. Serious Issue - I wish They would fix. All in all it is the most protective and stylish case available. You can recoup most of your lost functionality by assigning Voice Command to the record button. These are not like soft cases though. As you bump or drop your PDA around they will become damaged and inoperable and you will have to replace them.
balakhan said:
I have this case, but I prefer to use the original Siemens case, for the sole reason of ergonomics.
The Blue Angel is a sleek, sexy piece of art (all compacted into a phone)
Click to expand...
Click to collapse
omg Sorry but I have to say, I had palm IIIe, 2x palm 505, Tungsten E, qtek 1010, qtek 2020 and now BA which is qtek 9090 and last one is the more ugly than any of the pdas I owned before. Even the 2020 was piece of the art comparing to 9090
If you want to see sleek and sexy piece of art take a look at palm m505, that little guy gathered a lot of prizes for the design and thats for the reason, it looks like the some part of the porsche. BA is definitely not in that class.
Related
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
I have a krussel case for my nokia 6620. I thought another krussel would not be a bad choice. Although if anybody has a wonderful case they can suggest that is great.
Basically i want a case that is always on, since i can drop the unit when its not in the case that was included.
I have the PDAir Aluminium one, and think it's great. I'm very rough with my electronic toys, since they are "tools" for me, and a good tool has to stand me Also bought some pretty leather case (don't remember the name), because I thought it would be a bit smaller than the PDAir, but it wasn't, and you don't see the screen with those, so I'm back to PDAir. Looking at all the scratches it already has, it seems it does it's job well...
Re: Opinions on this wizard case? Seems to fit great and pro
xboxhaxorz said:
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
I have a krussel case for my nokia 6620. I thought another krussel would not be a bad choice. Although if anybody has a wonderful case they can suggest that is great.
Basically i want a case that is always on, since i can drop the unit when its not in the case that was included.
Click to expand...
Click to collapse
Is it possible to extend the keyboard without removing the phone from the case?
:?:
Yup I got the solid aluminium for travel and running around and the Krussel Cabriolet is on order for evening out or light use.
Cy
I think Krussel is the best. The prices are another story, this is about 50$.
http://cgi.ebay.com/BLK-PIEL-FRAMA-...3QQihZ005QQcategoryZ48673QQrdZ1QQcmdZViewItem
does the cabriolet from krusell protect the screen with some type of plastic over it? or does it just expose the screen?
this is the one im referring to
http://cgi.ebay.com/Krusell-Leather...QQihZ008QQcategoryZ108604QQrdZ1QQcmdZViewItem
That case doesn't protect the screen at all
Is it just me, or are the Monaco and PDAir cases identical (including the same pictures!)??
Monaco vs PDAir
More importantly, does anyone see a problem with one of these Case & Car charger combos on ebay?
has anyone ever got/seen one of these before?
http://cgi.ebay.co.uk/Black-Alumini...0QQihZ005QQcategoryZ48673QQrdZ1QQcmdZViewItem
looks absolutly fantastic, and lets you use the keyboard too.
Cases
Hello there. I have the silver aluminum case. I really liked the case after I got use to it. The only problem, my phone would freeze. Lock up totally. Only way out was to hard reset the phone. I know this sounds rediculous, but I've ruled out everything else. Ever since I stopped using the case my phone hasn't needed even a soft reset.
Currently I am using this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230007898731
But I just heard about this on XDA's site:
http://cgi.ebay.com/Cingular-8125-V...ryZ48673QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Just wondering if anyone has had any experience with the Krusell Orbit with Multidapt for the I-Mate JasJam (or similar)? Just wanted to make sure there were no magnets or foreseeable issues with the case before I went ahead and purchased?
Elite_Gamer04
It's not available yet. Expected to be released on Nov. 6
If you look at the pictures of the Krusell, while it looks very nice (I had one before for my Blue Angel and it was super), this one looks a bit clumsy. To slide the keyboard you've got to pop that button and have that awkward extra flap with the window open. And to take a photo you've got to bend the top flap way back. So, I'm not crazy about those two items. See the Krusell.
I just bought (but haven't received) the ORA Premium Chairman's Case (god what a lame name). ORA is apparently expansys/mobile planet's own brand. I think the design looks much more usable. You just open the case and slide the keyboard, no second thing to unbotton. And to take photos there is just a permanent cut-out, so no extra thing to move out of the way. The lens is somewhat recessed anyway, so I don't anticipate much reduced protection.See ORA Premium Chairman's Case
Another very nice one that seemed very functional (and much like my old Krusell for the Blue Angel) is this PDAir case. I really liked that one but went with the ORA because it looked a bit more protective, useful, etc. Otherwise I would have bought this one.
Anyway, that's my take on it...
Quincy
Actually this is a Piel Frama case. The problem I have with this case is that it has a plastic insert which goes in between keyboard and the upper part of the device. Upon the time the keyboard most likely will become loose and you won't be able to use the PPC without this case any more. And plastic itself will wear out quickly
quinxy said:
If you look at the pictures of the Krusell, while it looks very nice (I had one before for my Blue Angel and it was super), this one looks a bit clumsy. To slide the keyboard you've got to pop that button and have that awkward extra flap with the window open. And to take a photo you've got to bend the top flap way back. So, I'm not crazy about those two items. See the Krusell.
I just bought (but haven't received) the ORA Premium Chairman's Case (god what a lame name). ORA is apparently expansys/mobile planet's own brand. I think the design looks much more usable. You just open the case and slide the keyboard, no second thing to unbotton. And to take photos there is just a permanent cut-out, so no extra thing to move out of the way. The lens is somewhat recessed anyway, so I don't anticipate much reduced protection.See ORA Premium Chairman's Case
Another very nice one that seemed very functional (and much like my old Krusell for the Blue Angel) is this PDAir case. I really liked that one but went with the ORA because it looked a bit more protective, useful, etc. Otherwise I would have bought this one.
Anyway, that's my take on it...
Quincy
Click to expand...
Click to collapse
That ORA Premium Chairman's (you're right, what a terrible name!) case looks like the best I've seen yet.
Anyone know if it's available from any UK outlets?
The name just underlines the fact that this case is three times more expensive then almost any other case
joedoe said:
Upon the time the keyboard most likely will become loose and you won't be able to use the PPC without this case any more. And plastic itself will wear out quickly
Click to expand...
Click to collapse
Your past experience may differ quite a bit from mine, but in my experience having the same style of plastic cover thing to retain a device (Krussel's Blue Angel case) the plastic never seemed to suffer any damage/problems in 2 years of use. Not saying it's an ideal design, I wish the phone/PDA designers would make some sort of camera-tripod like screw hole which would allow the phone/device to be secured to a case, a car mount, etc.
Quincy
quinxy said:
Your past experience may differ quite a bit from mine, but in my experience having the same style of plastic cover thing to retain a device (Krussel's Blue Angel case) the plastic never seemed to suffer any damage/problems in 2 years of use. Not saying it's an ideal design, I wish the phone/PDA designers would make some sort of camera-tripod like screw hole which would allow the phone/device to be secured to a case, a car mount, etc.
Quincy
Click to expand...
Click to collapse
Plastic yes, but did you device suffer any damage because of regular sticking this plastic in between the keyboard and base?
joedoe said:
Plastic yes, but did you device suffer any damage because of regular sticking this plastic in between the keyboard and base?
Click to expand...
Click to collapse
Damage, no. But I can't deny that it appeared the keyboard was looser over time. Not much looser, not problematically looser. But if that's what you mean then yes, it did become looser (i.e., slide more easily, so that at the end of 1.5 years i could shake the keyboard open). Again, I never thought it was a huge problem, but certainly not ideal.
Finally the Krusell Orbit is out and mine is supposed to be shipped tomorrow.
joedoe said:
Finally the Krusell Orbit is out and mine is supposed to be shipped tomorrow.
Click to expand...
Click to collapse
Any reviews yet?
I expect to get it on on Monday.
how do you like it so far? I'm looking to purchase this too but then again with this whole talk about the plastic making the keyboard and base loose is worrying me. I rather not have that problem.
Please do tell.
I have the Piel Frama case in black. Its ok, the clear vynil goes ontop of the keyboard which holds the device in the case.
The problem is that everytime you want to close the keyboard, the vynil bends as it is not a snug fit but its a big deal.
Also, i am sceptical of it losening my keboard lock mehcanisms.
Now I am searching for clear crystal two part case so the device is always protected even when the keyboard is out and using a screen protector as well. Has anyone found a crystal clear hard case? I know that there are some for the WIZARD, but I havent seen any for the HERMES.
nutnbolt said:
how do you like it so far? I'm looking to purchase this too but then again with this whole talk about the plastic making the keyboard and base loose is worrying me. I rather not have that problem.
Please do tell.
Click to expand...
Click to collapse
Well, I've received the case but still hesitant to put the device into it. The plastic insert and magnetic lock are my two main concerns.
Currently I'm using black aluminum case and pretty happy with it except the fact that the radio and bluetooth signal levels are lower when device is placed into the case.
joedoe,
you are talking about the krusell orbit that you have received? If so, have you tried putting in the 8525 to see if the plastic is something that jasjamming is experiencing with the plastic folding back due to fitting?
Hi all,
I just bought this case and am waiting for it to arrive, I have not used the original case at all as I see it as stupid for me, the chance of me dropping it while I am trying to remove it from the case everytime it rings or I need to use it is quiet high. I first bought the silicon case of ebay but still to much of the phone was unprotected.
This silicon case seems to cover the entire phone completely, even with a screen cover, I just can't work out how it stays on the phone, you will get what I mean from the picture. I will let you know when it arrives.
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=18122&substring=SJDP838P
You just bought the krusell case or the silicon case? We are talking about the krusell orbit.
nutnbolt said:
joedoe,
you are talking about the krusell orbit that you have received? If so, have you tried putting in the 8525 to see if the plastic is something that jasjamming is experiencing with the plastic folding back due to fitting?
Click to expand...
Click to collapse
Yes, I've tried it. It was pretty difficult to put my TyTN into the case and even more difficult take it out.
The plastic isn't folding back because it stays under the keyboard even when it's opened.
It's very inconvenient to use the device as a phone in this case because the flap rests right on the top of a head or you have to bend it back and hold with your index finger.
I guess I'll stay with the aluminum case for now.
nutnbolt said:
You just bought the krusell case or the silicon case? We are talking about the krusell orbit.
Click to expand...
Click to collapse
I bought the Krusell Red Label Dynamic with Multidapt® I still have not recieved it, I was just showing all the silicon case as I was wondering how it stayed on the phone.
What cases are you chaps investing in to protect your Heros?
Have not seen any yet. Not sure if I should get one or not I did not get one for the Diamond and that is in great nick
New mobiles make me nervous...........
If you have the white... with Teflon coating and a good screen protector I would imagine that a case isn't necessary.
You haven't witnessed my ability to juggle mobiles and drop things out of pockets onto concrete
Also, when locking onto GPS signals, putting phones on window ledges and watching in horror as they drop 30 foot to paving slabs.....oh yes.....
Been there....done that!
cbailey said:
You haven't witnessed my ability to juggle mobiles and drop things out of pockets onto concrete
Also, when locking onto GPS signals, putting phones on window ledges and watching in horror as they drop 30 foot to paving slabs.....oh yes.....
Click to expand...
Click to collapse
i will be keeping a firm grip on my hero....
my old diamond was always trying to jump out of my hand
Mine will reside in my pocket, next to my homekeys, some coins and lint.
I like to put mine in a belt case while at work as I'm always running about. Apart from that a good screen protector normally does the trick
Soon available at www.noreve.com (high quality cases)
I'v tried all the high street stores, and nothing, 99% of mobile shops don't even know what the HTC hero is and 95% of them only sell iPhone crap and nothing else, the worlds getting taken over by sheeps with iPhones
Original HTC Pouch
I bought this:
https://www.expansys.at/d.aspx?i=184424
...and unfortunately, it's crap. My white Hero has now some black parts and looks already old.
So, don't buy this if you have a white Hero. No problem whit a black one, I guess
schauol1 said:
I bought this:
https://www.expansys.at/d.aspx?i=184424
...and unfortunately, it's crap. My white Hero has now some black parts and looks already old.
Click to expand...
Click to collapse
I got this for free (http://www.handtec.co.uk) and so far no smudges. I tried rubbing some white plastic (NOT my Hero) on the inner leather lining, and with considerable effort I can rub off some black colour. After cleaning the white plastic piece it was bright white again, maybe you want to give it a try.
The case is a bit tight, though. On the other side, the phone can't fall out even if the magnetic latch opens accidentally ;-)
Overall, I'd give it 7/10 (good but not great).
Foof case for my Hero
At the moment I'm using a Foof case with a sherpa fleece inner. Its surprisingly protective and fits perfectly. Snug enough not to slip out but easy to remove. Got the ipod touch size from http://foofshop.com/ and they have great choices for different colours.
I've got this pouch:
http://www.krusellcases.com/uk/p_krusell_product.aspx?i=179446
Just what I wanted so far, it protects the phone and is rather slim. I didn't want more bulk in my pants pocket. The Hero fits quite ok, maybe it's a wee bit too wide, but not much.
Edit:
I'm gonna return the Pouch to the shop. The inner part (as well as the exterior) is made of a leather-like matherial in black color. The first days it was ok, but it has started to leave black stains on my white Hero. I was able to remove them really easily but I'm not happy anymore. I'll go check if its a defect in my pouch or all these models leave stains. I don't recommend it anymore.
tallen3 said:
At the moment I'm using a Foof case with a sherpa fleece inner. Its surprisingly protective and fits perfectly. Snug enough not to slip out but easy to remove. Got the ipod touch size from http://foofshop.com/ and they have great choices for different colours.
Click to expand...
Click to collapse
That foofcase looks great..ordered two
I've got this pouch
http://www.mp3shop.nl/product/72567/50854/puro-nabuk-case-red-ipod-touch-iphone.html
The perfect fit for my Hero, and it is slim.
I bought my on expert in Sweden
batteries?
anyone find any good deals on replacement batteries that hold more power?
sprinkles said:
anyone find any good deals on replacement batteries that hold more power?
Click to expand...
Click to collapse
Why would you post this here, rather than the thread about batteries?
I do not have a Hero yet, but I do plan on getting on when it is released in the US. Anyway...
Have you guys ever heard of SwitchEasy? They make cases for the iPhone and they are my favorite case maker, and I was planning to get a case from them as I was originally planning to buy an iPhone about a year ago. However, I did buy one for my girlfriend about a week ago and she LOVES it. I waited on buying that iPhone and out came the Hero.
I recently sent them an email to see if they would ever consider ever making a phone case for the Hero. Unfortunately, that was about 2 days ago and have not had a reply...
Perhaps if we can get enough people to send them emails so that they can realize how many people have Heros (and provided you like their cases ) we can get them to manufacture some cases and add a bit more selection to the slim pickings so far.
I am not trying to promote their products or site in any way, but if you like the style of their cases like I do, I would definitely like to see a case from them for the Hero. Was just wondering if we can do a group effort here.
If this post violates any rules that this forum has, please delete or mod it. Thank you!
I'm using the HTC belt holster that I got for my Diamond. It's a nice tight secure fit. The Diamond used to wobble around in it.
Hey,
I was actually thinking about buying one of these. Is there anyone here, who uses one and can give me a short review about the pros and cons? I'm just looking for some case, which doesn't add too much bulkness, but still protects the phone.
Cheers
Sent from my X10i using XDA App
I'm also interested !
Here you can buy them cheap :
http://cgi.benl.ebay.be/HOT-Capdase...736349?pt=PDA_Accessories&hash=item20b4690a9d
I think it is hard to open the mini usb plastic ?
CoopZor said:
I'm also interested !
Here you can buy them cheap :
http://cgi.benl.ebay.be/HOT-Capdase...736349?pt=PDA_Accessories&hash=item20b4690a9d
I think it is hard to open the mini usb plastic ?
Click to expand...
Click to collapse
I use some silicone case atm, but it feels very bulky and not that safe. As of now, it isn't hard to access the usb-port, but I dunno bout the alumor case though.
I've been using a Capdase Alumor case since I got my X10 so I can't compare with anything else, but I think it's a great case.
It adds a bit of weight (as you'd expect from an all metal/rubber case) but I like that because it makes the phone feel more solid. Phone's been dropped from '8 year old daughter' height, and survived with no damage to the phone and only a slight scrape on the back of the case.
It's fairly easy to get the phone in and out of the case if you need to, but there's no real need. All of the X10's buttons are covered with rubber, but they all work fine. You have unrestricted access to the USB socket. Access to the 3.5 mm jack socket is very slightly restricted because the rubber has a bevel around the hole for some reason (strength I guess), but this is only an issue if you have a really thick plastic bit on your headphone jacks (my Sennheiser CX300s fit fine )
I was concerned about the rubber coming away from the metal on one part of the case, but it's not got any worse since I got it, so I guess it's ok. Rubber seems to be holding up well to regular 'in and out of pocket' use.
All in all, I'd recommend this case (and no I don't work for Capdase ). I got mine from Mobilefun in the UK and they're great (no, I don't work for them either!). They seem very cheap in that link above - watch out for fakes!!!
EDIT: Oh, and no problem opening the USB plastic cap (no harder than it is anyway, that is)
That thing looks pretty thick !!
I dont know if u like your phone looking and feeling thick, bc i got this clear plastic case and it makes the phone feel really chunky in my hand and not to mention the metal casing in the ebay picture looks thicker then my plastic case. but the case looks good tho just letting u know u might not like the feel.
LOL , It's almost an Otterbox clone HA HA HA HA
How do you know if its fake? I'm currently using one.
Sent from my X10i using XDA App
EphraimD said:
How do you know if its fake? I'm currently using one
Click to expand...
Click to collapse
No idea, but the cases in the link above are <$5 and the one I bought was ~£15.
Now, maybe I got screwed on price, but if they're that cheap it would make me suspicious.
At the end of the day, I guess it doesn't really matter as long as the case is good quality and protects the phone. If you get it for $5, then you're a winner
Allright I'll take a shot. We'll see where I buy it from, but still being aware of possible fakes I'll probably buy on Mobilefun. Well as for the bulk and phone feeling thick, I'll see that once it arrives, the weight doesn't matter to me as long as it's protected.
Review!
Give us a review of the case if u get it thnks!! i would like to find a better case since i really cant find many in local stores.
nvana said:
Give us a review of the case if u get it thnks!! i would like to find a better case since i really cant find many in local stores.
Click to expand...
Click to collapse
Will do.
Sent from my xperia using XDA App
CoopZor said:
I'm also interested !
Here you can buy them cheap :
http://cgi.benl.ebay.be/HOT-Capdase...736349?pt=PDA_Accessories&hash=item20b4690a9d
I think it is hard to open the mini usb plastic ?
Click to expand...
Click to collapse
I have one of them, they look really good. I use it for two months.. No Problems yet
Sent from my [email protected] using XDA App
Sorry to bring up a fairly old topic, but I figured its still better than to make a new one.
Can anyone post some pictures of this case fitting on their x10?
All the images on the internet were just sample images, I could not tell how it looks like in real.
I'm looking to buy a white one to put on my black X10, really would like to know how that would look, thanks
Alumor pictures
I have had this case since 12/2010. The one piece aluminium case wraps the sides & bottom & is completely lined with rubber extending to include the retaining rim. The case goes on & off very easily. The seal is very tight on the phone. I carry the phone on construction jobs with alot of dust, but no damage to the phone. All buttons press easily & 3.5 jack, USB , speaker, camera lens all have cutouts.
I have had to superglue some of the rubber along the edges once but not since & the case back is more slick than the phone back, making it tough to palm, but with pinky finger practice (supporting bottom of phone) is easily overcome. The metal case is very durable & takes drops well. The case does add bulk but is minimal for the metal protection & still goes in&out of pocket well. I still use the phone both with and without the case.
I paid $25.11 US including shipping from Hong kong to Ohio, USA.
Sent from my X10a using XDA App
Thanks for the review and photos, I am sure you are the first to post the photos of the product in so many angles. It's helpful to some of us.
Capdase is actually one of some reliable companies here in SEA.
I am using their flip-top leather case, thinking of getting alumor metal whenever I want to travel light.
i bought this case last friday in hk for HKD 98 (ie USD 12.6002)
it's a great case but i felt a bit bulky
so i remove the backcover of x10
and my phone is as slim as before!!!
this morning i received the case, is very beautiful.
cool! looking forward to get one!
I agree with prior post. Remove the back cover for a thinner phone. Case is still tight also.
Sent from my X10a using XDA App
i would like to see someone drop their x10 in that
Body Glove - Tactic Case for the HTC EVO 4G LTE
I saw 2 threads where people were going to try this case. If you purchased one would you recommend it? I did see them on ebay for $18.99 with free shipping.
I have a Body Glove for my Evo 4g and really like it.
I ordered one but it hasn't been released yet. They don't even have a picture posted on their site. I hope it lives up to expectations, as the pics I've seen are cool. Body Glove's cases are hit or miss, though.
jamerican413 said:
I ordered one but it hasn't been released yet. They don't even have a picture posted on their site. I hope it lives up to expectations, as the pics I've seen are cool. Body Glove's cases are hit or miss, though.
Click to expand...
Click to collapse
+1
Body glove has been a lot more miss than hit as of late for me tho. Anything from cheap cases that break after a couple days, scratching the phone, not fitting correctly or not locking and falling off to paint/clear coat rubbing off the first say.
Sadly, I wouldn't recommend body glove to anyone.
Sent from my EVO using xda premium
My local sprint store had the white ones in stock Saturday when I got my phone
I will be interested in hearing your opinion about how well the buttons work with this case.
jamerican413 said:
I ordered one but it hasn't been released yet. They don't even have a picture posted on their site. I hope it lives up to expectations, as the pics I've seen are cool. Body Glove's cases are hit or miss, though.
Click to expand...
Click to collapse
Got one with my phone Saturday. Fit is almost too good. Hard to remove without taking the plastic covers off the back with it. Also the cover scratches easy and is looking pretty old after just 4 days. I got the white one which was all they had available Saturday. Will be looking for a gel case soon. Buttons work alright though. No scratches on my phone from the case.
Sent from my EVO LTE using xda premium
Thanks for that. I'm cancelling my order. Too much money to not be happy...
My Sprint store had the white ones on release day so I got one. Seems to work pretty good!
Sorry for the bump and double post, but I wanted to second that the body glove RIPS the top-back off of the phone when removed. Or it rips the bottom panel off the phone (worse!)
I like it, I just don't like removing it!
its really hard to take out and when you do it it will take your back cover out, i dont like this cover because it feels weak, i bought it @ sprint but already purchased a otterbox commuter to replace it,
I got this case at the Sprint store and have been pretty happy with it. The combination of the hard plastic outside and the silicone inside seems to offer a lot of protection, and there is a nice lip to protect the screen. All the holes seem to be in the right places and the buttons work well. The power button is a bit difficult to press, but I actually like this as it prevents it from being accidentally locked in my pocket (it only there were a way to disable the Sense ring lock).
It does make the phone noticeably bulkier, especially on the back where the case bulges out a bit (there is a 1mm gap between the phone and the case. Still, the overall package is no thicker than my naked HTC Hero. The added side thickness also means that the phone doesn't stand up as much when using the kickstand.
The store only had the white version, unfortunately, but since I was exchanging another case I didn't have much of a choice (it was that or the pink Otterbox Commuter).
I've removed it a couple of times and had no problems with the back cover coming off, but I was careful to follow the removal instructions (at least on the Sprint version, it comes with instructions telling you to remove it starting with the bottom corner next to the microphone, followed by the other bottom corner, following by sliding the top out). It fits the car dock well with the insert removed and with some minor adjustment of the foam pads.
I got the Body Glove from Sprint as well, and don't need it since I already had a case. It is the gray one. If anyone is interested in buying it at a discounted rate, it is never used and still has the original packaging. PM me if interested.
ahecht said:
I got this case at the Sprint store and have been pretty happy with it. The combination of the hard plastic outside and the silicone inside seems to offer a lot of protection, and there is a nice lip to protect the screen. All the holes seem to be in the right places and the buttons work well. The power button is a bit difficult to press, but I actually like this as it prevents it from being accidentally locked in my pocket (it only there were a way to disable the Sense ring lock).
It does make the phone noticeably bulkier, especially on the back where the case bulges out a bit (there is a 1mm gap between the phone and the case. Still, the overall package is no thicker than my naked HTC Hero. The added side thickness also means that the phone doesn't stand up as much when using the kickstand.
The store only had the white version, unfortunately, but since I was exchanging another case I didn't have much of a choice (it was that or the pink Otterbox Commuter).
I've removed it a couple of times and had no problems with the back cover coming off, but I was careful to follow the removal instructions (at least on the Sprint version, it comes with instructions telling you to remove it starting with the bottom corner next to the microphone, followed by the other bottom corner, following by sliding the top out). It fits the car dock well with the insert removed and with some minor adjustment of the foam pads.
Click to expand...
Click to collapse
Seems like a lot of people missed this when I read reviews. I myself missed it initially.
http://www.shopandroid.com/body-glove-tactic-case/4A123A11576A.htm has the black version of the case for $17 today (7/19/2012) as their deal of the day.
Does anyone know if there is a holster out there that will work with the Body Glove Tactic case? I recently got a case and holster combo from my local Sprint store and I didn't check to see if the holster would work with the Car Dock Sprint sales and the case was too big to fit in the car dock even with the insert removed. The Body Glove Tactic case works great in the Car Dock, but I would really like to have a holster for it.
Thanks in advance.
jones79 said:
Does anyone know if there is a holster out there that will work with the Body Glove Tactic case? I recently got a case and holster combo from my local Sprint store and I didn't check to see if the holster would work with the Car Dock Sprint sales and the case was too big to fit in the car dock even with the insert removed. The Body Glove Tactic case works great in the Car Dock, but I would really like to have a holster for it.
Thanks in advance.
Click to expand...
Click to collapse
I have the same this cover as well as the otterbox commuter and i use the seidio Holster for both of them, it fits like if it was made for it.
<--- Thanks button :laugh:
Do you have the Active or Surface holster from Seidio? Thanks for the response.
Sent from my EVO using Tapatalk 2
this case broke my first htc evo 4g lte, its why i had to use my replacement, when i took the case off, it fit so tight, that it took the back off too, tearing the plastic......DO NOT BUY , BUYER BEWARE...spend the extra money and get a real case
I love mine. I love the grip on it. However, trying to remove it is a huge hassle and sometimes it breaks the case partially. Otherwise it's great for the grip. Feels good when I play the Pokemans on my EVO.
Sent from my EVO using xda app-developers app
I have one of these on my phone. It does scratch quite easy and takes the back off when you pull it off, but it does not scratch the phone or trap dirt and dust. other than scratching up i dont mind the case. I would much rather have that happen to the case than my phone.