Related
Hi, I have a XDA II TSM 500 (Telefonica) in Spanish versions:
rom 1.72.03 ESN
03/*15/04
1.10.00
1337.18
ext rom 1.72.102
And I have a parrot ck3100 but it doens´t work, I cant uase the parrot I have install the bt tools but nothing, bttools v10.12 and 11.00 but nothing, and the widcomm program but nothing, can someone help me?, must I upgrade the room? what rom?. Thanks
The parrot carkit is one of the few that support the BT headset profile. This profile is the only (speech) one the standard Himalaya roms support.
So . . .It should work. Afaik, you do have to configure the parrot in order to make it support the headset (instead of handsfree) profile.
I think this should be in the manual.
As from 1.72 roms there is NO NEED to use the Pocket Bluetooth Tools for these matters. Uninstall those!
The widsomm stack wont help either, because that one supports a lot of protocols, but it does not support the headset . . .
RE
Thanks but when I syncronice my XDA with parrot in the screen of parrot appear HEAD SET!! but dont appear coberture, battery, agenda, and I cant speek throught the parrot my radio versiono is 1.00, whan I configure the XDA II bluetooth I put the com4 and com5 enable is this right?, thanks.
RE
I tested It again, it puts HEADSET in the screen of parrot, whan I call from XDA II puts bluetooth headset is on but I it dosn´t work in parrot or in XDA II listen nothing, and the sincronice fails after 30 seconds, I downloaded 2 roms from here "windowsmobile2003se.exe", "RUU172601WWE.exe" must I put one of this?, thanks.
I bought a parrot driveblue, it didn't work . I called parrots office and they said me my version Rom 1.66.00 radio 1.10.00 wasn't high enough to work with driveblue, and I see that you still have the same radio 1.10.00. Isn't it that, your problem ?
Look edsub has a OS 1.72.00 and a radio 1.17.00.
If you change with your ESN by a WWE , be carefull with the country error code !
May be I'm wrong and this have nothing to see with your problem.
hi
TOMY00
PLEASE
use himegetdeviceinfo.exe on your device
and give me the informations you found on file devicedata
on windows directory on your pda
please
my device is dead
and i need the operator code from telefonica movistar
thanks
I have one of the first Parrot CK3000 which works fine with a Sony T610 mobile. I have expended hours of effort trying to get to work with an XDAI, an XDAII and a PDA2K (borrowed).
I tried Windows Mobile 2003, 2003se and various BT tools. None worked.
I upgraded my XDAII to Magneto (WM5) and BINGO! works fine now!
Petermcc said:
I have one of the first Parrot CK3000 which works fine with a Sony T610 mobile. I have expended hours of effort trying to get to work with an XDAI, an XDAII and a PDA2K (borrowed).
I tried Windows Mobile 2003, 2003se and various BT tools. None worked.
I upgraded my XDAII to Magneto (WM5) and BINGO! works fine now!
Click to expand...
Click to collapse
ck3000 here worked almost fine with MDA1, MDA2 (original) and MDA2 with wm2005. BUT no chance to change the volume of the loudspeakers. are you able to do this?
Hello all,
I could not BELIEVE the Compatibility list of Bluetooth Mobile phones for the Pioneer DEH-P70BT. So I had to go try it myself in the car audio shop.
After some fiddling around, it DOES work ! ! !
A few glitches, bluetooth does not automaticly re-connect when you step in the car. You need to use the radio to create the connection every time. No so bad even, just 4 presses on a few buttons on the radio and you're ready.
Some other things I haven't tried: Phonebook transfer, voice dial and signal strength probably do not work.
This is my BA:
Model: PH20B
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.13.00
Protocol version: 1337.42
ExtROM version: 1.40.556 WWE[/url]
I have exactly the same problem. But not only with XdaIIs, the same with my Motorola V3.
Last time I survived hard reset, after trying to reconect my XdaIIs to DEH-P70BT.
Thx god I had BackUp on my Laptop.
Now I think to upgrade it to WM5.
8125 bluetooth compatibility for pioneer p-6800 head unit ???
My phone is a HTC 8125 on T-mobile service and it recognizes the the radio's bluetooth but the radio "doesn't" recognize the phone.
I've tested my other phones (nokia and samsung flip phones) and they worked just fine and the clarity was better than a bluetooth headset (in my opinion)
I would like to know if there is a program or adapter I could use to make the 8125 bluetooth version compatible with the pioneer bluetooth version ????
Any feedback will be greatly appreciated!! ;o )
GHOST-TOWN VETERAN
BT Car Stereo
Hi,
I tried DEHP70BT but had problems. Now i'm using VR500CS-BT from Virtual Reality Sound Labs. It works great. Auto reconect works and even has A2DP profile so u can play music from BT PDA via car stereo. About $150.
I use DEH-P65BT and it work well on my BA & SEK800i, Auto Reconect & play music from BT PDA via car stereo
dhid1422, what bluetooth stack & rom are you running on your Blueangel?
Hi Guys,
I have encountered the following problem.
When I first add my Supertooth II (car kit) to the ATOM (normal Hands Free handshake), everything goes well and I can get and make phonecalls.
However, after stopping the bluetooth on the ATOM and restart it after a while there is no communication between the devices any more and I have to add the Supertooth again to work.
I did not have the problem with the previous cooked WM5 ROMs.
Any Ideas?
Thanks,
Yaniv
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
So A2dp does not work on assembling of Wm6 for Exec Aku0.7a.0, authors so can not correct this bag already during 2-5 months, explaining that for them a garniture absents with A2DP,AVRCP, very it is sorry...
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
hooliganboy214 said:
Yeah , me too . When i conect my Atom Exec ( Aku 0.7a.0) with Bluetooth Handset , i can't hear any thing ..........
Click to expand...
Click to collapse
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
MSI Player is unholy bull**** crap. We need native BT stereo in any player/
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Does not work!!!
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Garmin said:
Actually, i dont have any bluetooth device, would you please someone try this,.
http://forum.xda-developers.com/showthread.php?t=332692&page=14
post #670
Report the result okay,.
Click to expand...
Click to collapse
/HKLM/Drivers/BuiltIn/BtA2dpSnd
remove any Priority256 value
HKLM/Drivers/BuiltIn/WaveDev,
Priority256=149
/HKLM/Software/Microsoft/Bluetooth/AudioGateway
Capability=37
/HKLM/Software/Microsoft/Bluetooth/A2DP/Settings
UseJointStereo=0
BitPool=58
MaxSupportedBitPool=80
Remove all other values from this key including SampleRate
Does not work!!!
Coarls said:
yeah I got this problem too...actually I can turn on the BT but the phone (device) will not be found if searched by other devices. Even with the ver 7a WM6...
Click to expand...
Click to collapse
you did not check the option for bluetooth settings -> make this device visible to other devices.
I have been using bluetooth to activesync with pc and interchange with other pda phone, but the atom can easily be found
i didnt have this issue. i use a a2dp head set for listening to music. .. the only issue iv had is when ur speaking to some one over bluetooth and another calls comes in . the voice goes blank till transfer the call back to phone and then again back to bluetooth . but i thought that was a ITECH bluetooth head set issue so didnt bother talking about it. had this issue even during wm5
Click to expand...
Click to collapse
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
NEW bluetooth audio gateway
Ultimate Chicken said:
This is an MS Bluetooth Stack issue and cannot be rectified because Microsoft can't be bothered. It's a problem even with other phones, which is why people have tried to replace bluetooth stacks with ones from Widcomm and co (unfortunately for us, this isn't possible, and I believe that Jiggs has tried this before).
Microsoft doesn't garuntee full compatiblity with all headsets using its lame bluetooth stack. On my end, the A2DP works, the mic works, the "return to A2DP mode" works, I can resync when cut off, but I can't hear s*** when engaged in a voice call.
Jigg's ROM is still on the WM5 Bluetooth stack. The WM6 Bluetooth stack, which I've also tested, is supposedly better for voice calls but IIRC is NOT compatible with MANY headsets (A2DP won't work on most headsets that aren't marked BT2.0) - just ask the Athena users. It isn't compatible with mine - produces NO output in A2DP... I was the one who advised Jiggs to stick to the WM5 bluetooth stack. >_>
Headset: SonicGear Blue2 SR300
Click to expand...
Click to collapse
thanks for clearing that out Ulti. I was wondering if you could try one more time with wm6 ms bluetooth stack? In the headset profile, I have tried to integrate a new set of bluetooth audio gateway. Unfortunately, this requires flashing a new ROM as the modules need to stay modules to work.
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
yanivw said:
Jiggs,
what can be the reason for after first handshake everything is going well, but after restarting it the devices do not communicate (for inbound & outbound phone calls) ?
Moreover, if you use the same WM5 bluetooth stack, how come I did not have that problem with the WM5 ROM ?
Thanks,
Yaniv
Click to expand...
Click to collapse
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
jiggs said:
Yaniv,
for first question- sorry, I don't know. I think second question is obvious - wm5 drivers is meant for wm5 system and not wm6.
Have you tried the the WM6 A2DP with WM6 audio gateway driver?
Click to expand...
Click to collapse
I did not.
How do I get and install it ?
Yaniv
yanivw said:
I did not.
How do I get and install it ?
Yaniv
Click to expand...
Click to collapse
Post#13 above
It is open to everyone with a bluetooth headset to try... I don't have a device to test it. sorry.
http://www.mediafire.com/?0uqg0utmpkx
Click to expand...
Click to collapse
Thanks, Jiggs, but the A2DP's still NG to my headset with this test ROM. Replacing the keyboard with the black one I liked back during O2 Mini BigStorage is a nice touch, tho.
Anyone else with a BT Stereo Headset, especially a 2.0 standard one, go ahead and help test. You may have better luck than me (the SR200 is just BT1.2 standard, and I'm now pushing SonicGear for a firmware update).
Sorry, I have Pulsar 590E and its 1.2 Bluetooth.
chartreux said:
since all of you have bluetooth device, can one of you test this application. this is MSI BluePlayer, try to play the music from this application and let me know the result.
Click to expand...
Click to collapse
Yeah , I just try it , and it works verywell . But my Bluetooth Handset isn't MSI 's device , so i only run it in 31s . Do u have other method ???????
I have searched across all the forums and have noted that the Hermes does not pair with a Cars built in blue-tooth radio allowing sound through the built-in speakers.
Does anyone have an update to this issue or is it just a case that WM6/Hermes and integral vehicle bluetooth simply do not work.
I have tried upteen ROM updates to no avail. Any advice would be greatly appreciated. BTW I have paired the brand new car (Fiat) successfully with a Nokia 5300, XDA Exec (WM6.1) and XDA IIi (WM2003)
Thank you all in anticipation.
291 said:
I have searched across all the forums and have noted that the Hermes does not pair with a Cars built in blue-tooth radio allowing sound through the built-in speakers.
Does anyone have an update to this issue or is it just a case that WM6/Hermes and integral vehicle bluetooth simply do not work.
I have tried upteen ROM updates to no avail. Any advice would be greatly appreciated. BTW I have paired the brand new car (Fiat) successfully with a Nokia 5300, XDA Exec (WM6.1) and XDA IIi (WM2003)
Thank you all in anticipation.
Click to expand...
Click to collapse
Pairing a Hermes with a Bluetooth Car Kit is certainly possible, and indeed routine. I have successfully paired with my two Ford cars, with a variety of WM5, WM6 and WM6.1 ROMs.
I merely followed the usual steps to set up a partnership, and ensured that the partnership was set as 'Hands Free' on the final page of the setup process.
So my experience is - no dramas, and I can't see why you are having problems. The car is, after all, just acting as a Bluetooth headset.
Transfer of contacts to your Car Kit is a bit more problamatical, as you have to set up Bluetooth Sim Access Protocol (BT SAP), to give the car, as it says, access to your sim card.
Hi and thanks for the response.
I have no problem pairing the hermes and it reads all my contact information and does everything I would expect save for the sound; I don't get any sound from the cars speakers and yet it all works perfectly with other makes/models of phone/pda.
I suppose the problem would be easier to solve if none of it worked but it does. I watch the car screen as it tells me I am making a phone call from my address book and I can see calls coming in but I cannot use the microphone on the PDA nor hear anything via the pda or the car's speakers. The XDA Exec (WM6) Nokia 5300 and XDAIIi (WM2003) work flawlessly (I borrowed those from my friends).
Thanks once again.
291 said:
I have searched across all the forums and have noted that the Hermes does not pair with a Cars built in blue-tooth radio allowing sound through the built-in speakers.
Does anyone have an update to this issue or is it just a case that WM6/Hermes and integral vehicle bluetooth simply do not work.
I have tried upteen ROM updates to no avail. Any advice would be greatly appreciated. BTW I have paired the brand new car (Fiat) successfully with a Nokia 5300, XDA Exec (WM6.1) and XDA IIi (WM2003)
Thank you all in anticipation.
Click to expand...
Click to collapse
291,
I've had the same problem...
But found this program... From JetWare Mobile - Its not free but there's a trial period to at least see if this fixes your problem...
http://www.jetwaremobile.com
Now My bluetooth on phone and car works flawlessly, including: Music connection (can play Mp3's from phone and contacts loaded to the car stereo) I was even able to get Voice Commander to work through the car stereo but could not get announcements to work (a known issue with VC 1.6)
Look at this post, may help...
http://forum.xda-developers.com/showthread.php?t=290871&highlight=75BT
Hermes with RT4 system
I have got th esame problems with my hermes and my Jumpy with RT4 and bluetooth connection. I can drive my hermes, make a call by the way of the RT4 but speakers and mic are out. The only solutions to make them working is to make call by my hermes ans after RT4 working good and for and incoming call, accept it by the way of my Hermes. With this solution, I can ear ans speak unsing bluetooth system. If some one can help me, thank a lot...
My S200 has been repaired (new motherboard) and I re-installed Korand 3.1 rom and restored everything, but A2DP is not working any more with my Jabra 620 stereo headset. I tried other roms such as ROM Prophet My Green Edition ROM 2, but still no A2DP.
I don't understand the problem and I don't find a solution. When I try to connect using the batterystatus function, I get the message "failed to connect to device). I never had to connect it, since I normally get the sound that it is connected using A2DP and a logo is displayed in the top. I also tried with radio 2.19 instead of 2.47, same result.
Any ideas?
Problem solved
Hi the problem is solved! I installed a bt a2dp protocol that I found here [wm6.1] My Little Green
It would be nice, if you would share this protocol with us.
Can you upload it somewere cause i have bt probs too.
Thank you
skylow said:
It would be nice, if you would share this protocol with us.
Can you upload it somewere cause i have bt probs too.
Thank you
Click to expand...
Click to collapse
It has been shared with us two month ago already.....
http://forum.xda-developers.com/showthread.php?t=382263
Thanks bro