hello
I have a big problem with my Pocket PC O2 Xda II.I mde a mistake by putting ROM update through bluetooth.
During the instalation the connection through activesync has broken and said that it could not be synchronized again.
Since then,the pocket is not switching on and switching off.On the display is only shown SERIAL v. 1.06. and I have no backup.
It is not restarting with master reset eighter. could someone help me how to restore the pocket`s proces
THANK YOU
Reflash your device again using the USB crable.
Related
I have such a problem with my I-mate. While updating my system ROM (ruu152113wwe_cdl-sku1) my PC hang and after an hour I had to reset it. After this my I-mate stopped working. A blue screen with I-Mate logo appear and then the blue LED begin blinking and then nothing. Hard reset doesn't help. Some system information appear when reseting device:
No GSM
D 1.52.00WWE
It seems to me that PC hang after the first stage of upgrade was completed (deleting ROM, flashing new system ROM). I remember, that it hang while upgrading was on stage of radio service update.
Now i can do nothing with my device. Please HELP!! Or this problem can be solved only by bringing the device to the service center
My WiFi is not working when I turn it on. When I turn it on, it just do nothing. I tried to run WLAN Module Test to check the problem using Self Diagnostics, sometimes it can detect the MAC address, means OK, but sometimes it shows error saying "GetAdapterInfo() return FALSE....".
For your info, I already reflash the updated ROM (0426), but it seems not working. Now, I'm using ATOM EXEC ROM (0721).
Can someone please help me before I send my ATOM to repair center?
You sure this isn't after an ActiveSync session? My device often needs a soft reset after a session.
Yeahhh... I'm very very very sure about this! Eventhough I didn't use Activesync, the same problem still happened.
I tried to downgrade the ROM, the WiFi still not working!
I have the same problem as idzilhafis.
Tried to run Self Diagnostic and got the same two answers, sometimes the module is correctly detected and somtimes not.
When the module is detected during the test, also the Access Point name is detected (I have a wifi AP at home), but the connection doesn't work.
When I use Wireless Manager, the module is not alwais detected and sometimes also the wifi button disappears.
Of course I flashed and re-flashed the firmware, using the original manufacturer's latest ROM and the "not for sale" version. Nothing changes.
May be an hardware failure?
I think, I can answer myself.
Yesterday in the evening I did put the Atom in the fridge for a while, because i noticed that using the pda and then increasing its temperature, the module was never recognized.
Using the pda after an hour of fridge (I did put it in a little bag), the wifi module works like a charm. It is ok until it's temperature raise again, then the module hangs.
Such a behaviour is typical of an hardware fault.
I think that this kind of problem is surely not due to a wrong use, and should be covered by warranty. But I don't know where to send it for service (I'm in Italy).
Any idea?
I had tremendous problems with my O2 Atom WIFI which would not connect to my laptop WIFI LAN Network. I asked O2 Technical People & Lot of people on this and other forum but got no perfect response.
Practically trying many options I by chance put back the old ROM upgrade of O2 2006123-45 and tried switching on the WIFI and lo and behold it worked fine.
Then I reload the new ROM 20060426 again and it works fine.
This proves that if you reload the NEW Upgrade ROM more than once it locks the WIFI.
No, it proves that any ROM upgrade can result in strange things, and reflashing either the same ROM or another ROM can fix it. It's well known with stuff like battery use (some users have had their standby time doubled by just reflashing the same ROM).
I sent to o2 expert and he don't know what to do. Tried to change registry, still not working. Tried to reflash, stillnot working. I think hardware problem. Don't worry, I still got warranty!
Hi All, I'm a newbie.
Pls shows me where can I download this oldrom O2 Atom 2006123 (-45)?
Or Who can give it to me through email: [email protected] ?
Help me pls, tks a lot
Hello,
yesterday i was flashing a new rom to my prophet and for some reason i got a bluescreen while doing it. and the process stopped at 60%
after flashing again without problems i face some poblems.
sometimes it takes 1 or more softresets for the cell to find my network.
wlan ist not working at all. i can find a present network but when i try to log in i allways get the message network unaviable.
i tried to install the original o2 rom that came with my device but i have the same problems
just that it finds the wlan network and as soon as i enter the password the complete call hangs.
so now i have the shadow "my edition" 2 rom on my phone but i cant get it running it goes till "tap the screen to set up your Windows..." and then nothing happens anymore
i can not even get to the bootloader the phone just does not boot when i hold any button during boot. only thing working it hardreset but that does not change anything
before i tried to flash a new rom i was using the "my edition" 2 rom and everything was working fine but now after the crash it does not work anymore
i managed one time to get it running compleatly but wlan did show the same problems as under othe roms
could it really be that i damaged the hardware durning my abortet flash?
can anyone offer some help how to fix this?
IT seems unlikely that you have damaged the hardware, but it is possible.
Can you enter bootloader? If so, disable connect through USB in activesync, connect the device, and run a NVID AKU 2.2 WM5 ROM. See if the problems persist with this.
Sorry for my english!
yesterday after flashing an dreturned original rom tim italian v.RUU_Nike_TIM_IT_1.31.408.09.
the device is starting without problem and installing operator setting.
in 2nd restart i setup any program (tom tom 7, tcmpc, opera mobile 9, spb time.) the divece is ok, after stand by i push the power button the phone display is off, the line's led is green.
we can help me?
or i call yhe support htc?
Mark the checkbox 'Advanced Network Connectivity' in USBtoPC somewhere in Start -> Options. I have the same Problem with another ROM.
If i uncheck the box my Device won't wake up from StandBy when Power Button is pressed.
But now i have always to uncheck the named option before sync with PC (ActiveSync). Waiting for solution.
Regard
the green led does it burn every time, you switch on? you cant switch off again?
connect it to your pc!
if your computer find a new device ... pleas try this drivers ... http://www.4shared.com/file/37767906/f3f2d803/MotoQ_QPST_Drivers.html
if you have in your hardware manager new "com" connection like "Qualcomm NMEA Diagport" your device is in the oemsbl!
If yes ... i tell you a way to reboot your phone!
hallo netrunner at tanks for your help.
when the device have the problem off shout down, activesync don't see.
tomorrow i haven't problem, the device is blocked at 1.00 pm, i have a soft reset in any time, the problem is off self only and in this moment it worked well
yesterday i flash with rom tim and radio rom 1.58.21.23.
the radio rom could he give the problem?
when start the problem today the device is in hsdpa
i powered off hsdpa the problem is cotinued
before i flash the 2 rom the device work very well.
does thing recommend me?
Ok all ok !!!!!!!!!!
1) I reflash the rom original tim
2) I flash the radio rom 1.58.16.27 (what there was already when I have bought in to device) with hard reset is OK!!!!!!!!!!! :
Tanks for all!!!!!!!!
your radio rom is crashed ... some times you can have this error! ^_^
Hi there. I have an Ipaq hx2110. Yes it's a very old machine
1 year ago I updated WM2003 to WM5. Worked, but sometimes freezed, and shutted down. Some days ago I couldn't turn ON. OS loading freezes at ~20%, PS FORMATTING at ~60% (fading out screen, and no react for reset or any button, only react for battery remove)
I tought maybe the OS corrupted, and tried to reflash. After done, same problem..
(hp software couldn't identify the version of current OS).
Tried to revert to original WM2003... WM2003 no reacts for any reset or anything.. Black screen.
Tried WM6.5... WM6.5 reached loading percentage 100% (very slowly), but freezed after. HARD RESET same problem in WM6.5 like WM5... freezing.
only PRE-BL mode working well
I think this problem maybe connected to internal battery, but I dont know how to charge or test it, because charging don't start on Pre-BL.
My girlfriend bring PDA to her work.. tried to switch on and format, and said: OS loaded ONCE succesfully, just unfortunately battery falled out from pda when she picked up to configure OS, because no back was on PDA.... I don't know how she did....
All ideas will welcome, and thanks for help