I have a Qtek 2020. I've tried to do an upgrade through usb but apparently it didn't work. It started as planned but I waited several hours and it didn't finish. I didn't get any error message. Now I only have the bootloader,and I'm not even sure it is complete because some bootloader_commands aren't working (ie: s2d -> Invalid command).
What can I do to recover my device? And how can I bypass the "Not allow operation!" error.
Related
I tried to upgrade my Device but When i install new update after two next Give me Error message said " Error 120:country id error" 5-5-N-8-N
and turn off my device and show only on to screen serial and on bottom Ver 1.06
PLS Help me
Country code errors =>
http://forum.xda-developers.com/viewtopic.php?t=12101&start=0
unfortenately you are now in a position that you can't see what your device was.
Do you remember what OS was on your device? Which update did you try?
I am using vista and I was trying to flash my phone to the one provide by 3g in Australia. I updated the usb driver. During the update process someone unplugged the cable!!!!!
Now my phone doesn't pass the windows mobile logo and be able to get in the boot loader mode. Is my phone dead? I tried that rom again it says error 294 invalid vender id. I also tried to upgrade it to wm6 but always get 262 update error which says communication error.
Any help???
Thanks in advance
hi Richard,
for other reasons it looks like you have the same problems I had:
http://forum.xda-developers.com/showthread.php?t=319625
In this thread I have summarized my problems - and there was a procedure to fix it (at least for me) - it will take some hours to get everything DL and installed & compiled
When you need it I could describe more detailed what I did after I got my phone back to live via KITL
hope it will also work for you
Matthias
Hello all,
I have an T-Mobile MDA (Dutch) that hangs in the bootloader screen after doing a wrong flashprocedure.
I tried to exit the boot loader screen with mmty and UNI_ExitBootloader, but that didn't work, so something is seriously wrong with the current rom data.
I tried to read (and understand) every similar topic on this forum to get a solution. They all point to procedures where I need to copy and run the (h)spl's, but that's impossible because I cannot boot the device.
I also tried to flash a shipped T-Mobile (NL) rom into the device. Unfortunately, the flash procedure hangs at 0% for a while and shows an error message ("connection error")
Is there a way to get this thing alive again?
More info:
Bootloader screen says:
NIKI200
SPL-1.16.0000
CPLD-4
T-Mobile MDA Plus (256MB rom) Dutch version
Some more information...
I have now tried to flash RUU_Nike_HTC_NLD_2.09.404.1_Radio_NikeMR_1.65.28.25_signed_Ship now, and this one is NOT stuck at 0%, but displays the invalid vendor id error after 1%.
I think I need this "type" of rom update, but now for T-Mobile (Dutch), so I won't get a vendor id error. I currently have a CustomRUU with the Dutch T-mobile rom (which is stuck at 0% and reports an 'connection' error message)
I also tried to flash from sd card, but it doesnt start. Do I need to rename the nbh file, because the bootloader (before the rgb screen) says "no image file" ?
I don't know what did the trick. But I have run mtty and entered the commands "set 16 0" and "set 14 0".
Then I tried to flash the Dutch t-mobile rom again, leading to the same error and a flash screen stuck at 0%.
I rebooted my device then .. and there it was.. a T-Mobile boot screen and a device that boots without any problem
Thx Tutti-frutti you are king
Hey All,
I'm at my wits end here. I got a new phone through Sprint's phone replacement program a week or so ago and decided to flash it today, that's when my problem started.
I've searched Google, PPCGeeks, SmartphoneJunkie, and XDA-Devs and tried all the suggestions but still seem to have no luck getting around the 262 Error when I try to flash to HardSPL 0.37.
When I enter bootloader, I face the following screen:
Security Unlocked
RAPH800
SPL-0.40.0000
MicroP-Herman (LED) v0C85
MicroP-Herman (KEY) v0685
PSOC-Raph STAGE_EVT v20
USB
Initially I tried flashing after I plugged it in. Error 262. I realized I forgot to associate it through WMDC (through a clean install) so I did that and tried again. Error 262. I searched around and realized I didn't deselect "Enable Advanced Network Functionality". Changed it, tried again, Error 262. I tried it on my desktop (Win7 x64), my laptop (Win7RC x32), and my old desktop (WinVista x32) all with Error 262. Knowing it was a communications error, I disabled Windows Firewall and all AV products thinking maybe they blocked something. Still Error 262. I even re-downloaded the Hard SPL package. Big surprise, Error 262.
I read in my travels that the shown Security Unlocked banner is for Radio only, so I know I have to flash to SPL-0.37 before I try any other flashing.
Suggestions, Please??
Aquinox88 said:
Hey All,
I'm at my wits end here. I got a new phone through Sprint's phone replacement program a week or so ago and decided to flash it today, that's when my problem started.
I've searched Google, PPCGeeks, SmartphoneJunkie, and XDA-Devs and tried all the suggestions but still seem to have no luck getting around the 262 Error when I try to flash to HardSPL 0.37.
When I enter bootloader, I face the following screen:
Security Unlocked
RAPH800
SPL-0.40.0000
MicroP-Herman (LED) v0C85
MicroP-Herman (KEY) v0685
PSOC-Raph STAGE_EVT v20
USB
Initially I tried flashing after I plugged it in. Error 262. I realized I forgot to associate it through WMDC (through a clean install) so I did that and tried again. Error 262. I searched around and realized I didn't deselect "Enable Advanced Network Functionality". Changed it, tried again, Error 262. I tried it on my desktop (Win7 x64), my laptop (Win7RC x32), and my old desktop (WinVista x32) all with Error 262. Knowing it was a communications error, I disabled Windows Firewall and all AV products thinking maybe they blocked something. Still Error 262. I even re-downloaded the Hard SPL package. Big surprise, Error 262.
I read in my travels that the shown Security Unlocked banner is for Radio only, so I know I have to flash to SPL-0.37 before I try any other flashing.
Suggestions, Please??
Click to expand...
Click to collapse
it doesn't seem like you are doing the process 100% correct. unlocking your phone really doesn't have much to do with activesync, as that part is only needed to actually move the files to your device.
you are supposed to initiate the hardspl from the device itself with the .nbh file present on the sd card. your sd card may have something to do with it, it should be FAT32 formatted & probably no larger than 4gb.
feel free to get at me thru PM/IM/EMAIL watever & we'll figure it out man. GL
Hello,
I have a big problem. I flashed my HTC Touch Dual (Swisscom XPA Touch Dual with Italian language) with SSPL first. Then I forgot to flash the device with uSPL or HardSPL and a new ROM (official HTC wm6.1 German) was failed in the middle. Now I have the "upgrade rom code error". Flashing the HardSPL or uSPL is imposible now, bcause of the "ERROR [262] : UPDATE ERROR". I can't find the original ROM (swisscom italian) for the device, all other official ROMs brake with the error " ERROR [294]: INVALID VENDOR ID" (because there is no HardSPL / uSPL, right?). I have USB connection in bootloader mode (can go there only, the operator system is lost) but in the device manager there is MICROSOFT USB SYNC and not HTC USB SYNC (can't identificate the device, only as a "Qualcomm..." in "devices and printer (WIN 7 x64). I have done all the steps for "drivers for WIN 7" and tried it on a (virtual) WIN XP with the same results. Is there a way to save the system with mtty (it's too difficult for me) or other processes?
Thank you in advance (and sorry for my english) !!!
P.S.: I looked at google and other threads in this forum, but without results
NIKI100
SPL-1.22.0000
CPLD-1
-Please use the 'Search' function first, and check the manuals already made available for the Niki.
-First read the manuals completely and follow the steps meticulously..!
-Before posting your questions, remember that everything you need to know, to flash your device, is probably already made available for you on the board.
-Take your time to find out what you need to know before you flash your device, or you 'will' brick it..!
Hello ebsbow,
I got it after two days full of desperation! Mtty was the solution. Two simple commands like "set 16 0" and "task 8" and my device was ready for flashing again. But now step by step.
I have a new ROM on it. Great!
I have same problem plz help....
[email protected] said:
Hello ebsbow,
I got it after two days full of desperation! Mtty was the solution. Two simple commands like "set 16 0" and "task 8" and my device was ready for flashing again. But now step by step.
I have a new ROM on it. Great!
Click to expand...
Click to collapse
I have same problem with my niki plzz help me
Always showing bootloader screen with rom upgrade error
I was trying to revert to windows custom rom from android (due to frequent freezing) and then onwards booting the phone I am always getting the bootloader screen displaying rom upgrade error.
I tried hard reset but still the same problem persists, then I downgraded the HSPL 2.08 to SPL-1.42.HSPL and then tried reinstalling the custom rom but still the same problem persists. In between after downgrading the HSPL, I tried task 29, it was unsuccessful after 96% (shows Invalid Command (Error 290)), while reinstalling the customRUU I have, I got something like error 270 at the end (it goes fine till 100%).
I also tried with installing the radio (ver 2.15.50.14) in between but to no effect
Please help me in fixing the issue, my phone is of no use now