Hello i've got an Wallaby from O2 ..
I want to format my divice so i can reinstall the most needed things on it.
But my problem is witch programs i must use?
And witch ROM i'll have to get for the new software so i can use my GPRS, for T-Mobile ?
So witch ROM program/install (because he must first be totally clean before i go on)..and how can i reformat my O2 Wallaby XDA ppc PW10A1 ??
Please help! I've got a dockingstation so help me with some links...
....anyway! Please help me! I'm dieing for some information !!
It's not possible for me to get on the GPRS.
Greetz,
PaSo
You get a clean ROM by doing a hard reset. Then only programs already included in theROM will be onyour device.
Stefan
but that's the problem !!!!
It's an o2 device and i've got a T-Mobile sim-card in it.
And i want to go onto the GPRS-Network, but that isn't possible because the ROM on the device blocks that.
So can i put an other ROM on it ??
New update or something ??
You can flash a T-Mobile ROM on it.
BUt i do not believe that the device blocks just GPRS. Have you done correct settings for T-Mobile? Is the sim card working in the device (Phone)?
Stefan
My sim is working ok. I can call and sms to other people.
Ok. Can you tell me how to flash my XDA... with new software?
Because i want to delete all, format complete and reinstall new working software for every simcard.
So i can use him!!
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashActiveSync
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
http://wiki.xda-developers.com/index.php?pagename=ROMkitchen
hmm i'm not that intelligent to use these programs.
I don't know how i can flash the device.
What must i do ??
It should work to download a ROM in EXE format, connect your device to your PC running active sync and run the Exe-File....
Stefan
It workd, i've got a new ROM onto the divice.
The one of xda-developers self.
Now i've got to get the right settings for TMobile.
Thanks anyway.
And maybe next time.
Related
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seens to be broken...
It woked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Dear Fabi,
I know it might not be the suitable question, but could you plz tell the exact steps you did that led you to this situation. This is to allow you to get precise help, and to be a learned lesson for the rest of us, coz I was about to upgrade from 3.25 to 4.00.16 but prefered to ask first.
Don't worry, the guys here are way clever and I 'm sure you will get the help very soon ... TKR
Nooo problem. I was about to Sync my XDA via USB Cradle and noticed that my backlight was turned off. Also my Phone was searching for a Network (now I know why... :roll: ). So I thought it might be good to reset that thing..... *aghhhrrrr* That was a big mistake. After the reset I saw the boot screen and the backlight blinking twice. That was all. My Bootloader (5.15) says "GSM Error"... now I'm without Mobile Phone for a while :?
so in other words, 4.00.16 was OK but you screwed up the XDA by just doing a reset while the backlight was off ?? ... I 'm afraid I don't get it :?
Fabi said:
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seems to be broken...
It worked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Click to expand...
Click to collapse
Confirming you used the SD card method to upgrade, right!
Also what radio band is or was your XDA set to before the upgrade?
HTH
No I didn't use SD Card to update my XDA. I used The ROM-Kitchen to generate a exe and updated over USB cradle.
Im running my MDA (i don't have a XDA ) on a german GSM 1800. Eplus. It was always set to this option and I never even tried to change it.
@biso007:
I screwed my MDA because I did a reset. Thats right. But I had some backlight issues in the past few days after upgrading. The backlight sometimes turned off and there was no chance to get it back on... only a reset. I first thought the proplem occured again yesterday but then i saw that my MDA was looking for network. After resetting the GSM part was dead....!
So back to my problem. I now ordered a SD Card Reader/writer. Is it possible to resore my system via XDArit and a backup? Can someone provide me a working 2002 backup from boot, OS and GSM part? Or can I do this by myself. I really appreciate your help!! Thanks a lot.
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
and yes its possible to restore your system via XDArit and a backup.
As far a the 2002 PPCPE ROM goes you should be able to download it from T-Mobile, so visit their web site and search their MDA upgrade/download section.
HTH
Qman said:
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
HTH
Click to expand...
Click to collapse
My MDA does not boot anymore! I can't get into windows and i can't sync anymore! I have the Radiostack and the 2002 image fram the T-Mobile Website but the image ist a NK.nbf. AFAIK XDArit needs *.nb1 Files? I also noticed that it seems not possible to write the GSM Part to the phone via XDArit.
Hiya Folks
I wonder if you could helpme with a bit of a problem, i have recently attempted to upgrade my XDA using the reccommended downloads from O2, this upgraded my ROM and the GSM part of the XDA. however when trying to get into my XDA it freezes, i can get into the bootloader but get a GSM error, am i able to flash the GSM, if so where can i get the flash and how would i carry this out. i have got into the GSM part of the bootloader and the GSM will not turn on. i have tried copying the GSM from a friends XDA only to find the message "please connect to RS232 and run PC monitor now"
Hope you can help
Cheers guys, you are truly more useful than the folks who we obviously look up to at O2!!!! Mind you this does not say much!!
Thanks again
Dave
where can i find the wm 2003 upgrade file for qtek 1010
where can i find the wm 2003 upgrade file for qtek 1010.
plz can any body reply to me at [email protected]
i want to upgrade my qtek1010 2002 wm to 2003 but could not find it .
can any body reply to me at my email
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
This Rom is best for all those who have tmobile ameo stuck on bootloader
ENJOY
http://rapidshare.com/files/50715004/My_WM6_TMOB005.rar
Thanks very much. 2 Questions: Do I need to unlock my Ameo to use this and will GPS work afterwards?
Thanks
no neeed to unlock
gps works flawlessly
strange for me it says wrong vender id. I could really need the help because im stuck.
That is impossible, it will work for one countries ameo, but you cannpt have one thta will work for all ameos.
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Sorry I wasnt very clear, I was talking to the thread creator, your problem is due to the fact that his claims are false...
Ok i understand, can somebody supply me plz with the orignal german tmobile rom. My ameo is screwed. plz help
Cant the Tmob005 ROM be used on all Ameos?
adamelphick said:
Cant the Tmob005 ROM be used on all Ameos?
Click to expand...
Click to collapse
No, I don't think so.
For example, T-Mobile in Germany has the code T-MOB101
So, it's maybe for US-Ameos or GB-Ameos (I don't know)
all i know it doesnt work on my, and i need a rom for that i dont need to unlock the ameo because i cant untill i have it restored.
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Hi
Try get into bootloader (press "camera button+stylus reset for atleast 10 seconds") then try to unlock with Olipro's unlocker (read the unlock thread first) then you can load any Rom as you want. If you unlock you can revive the device.
Good luck
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Sexxmax said:
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Click to expand...
Click to collapse
Hi Sexxmax,
I'm new to this forum (getting an Ameo tomorrow) so I may be wrong but the problem may be because you have Windows Vista. I remember reading on the Universal forum that flashing and unlocking is almost impossible to do on a Vista PC.
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Sexxmax said:
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Click to expand...
Click to collapse
No, I'm getting the English Ameo. There's a member on this forum called tupisdin. From what I can tell he/she is quite the expert at recovering devices that are experiencing errors. Try messaging him/her or searching for his/her posts.
hello every1, i am not very much into winmobile, i am symbian freak for a very long time.
in symbian there is no possibility to flash bricket device at home, ant that is spwcialy what i like at winmobile
i have htc cingular 8525 and it was running wm5.
rgbw string:
HERM100
IPL-1.04
HREM100
SPL-2.10.Olipro
and iv tryed to upgrade it to wm6. it stoped on 11% at image writing on ROM, and give me error 262. i remove battery, wait, plug back.... and it started to write again. and stoped on 11% again.
so iv changed pc(go to my friend), and same thing again.
iv even changed cable(from nokia 6120c hehehehe) nothing works
my ROM is deleted and i only have RGBW screen(bootloader)
is there any possibility to boot my device? form mmc???? anything? i am runing activesync 4.5.0
iv readed a lot of tuts, but ne1 helped me.
i hope that someone solved this problem.
thanx in advance
wook
[email protected]
It sounds like your radio has been stuffed... This is BAD...
First, try to flash a stock carrier rom(preferably your original carrier rom) and see if it goes past the 10-15% mark. If not you can try to flash a Radio only rom.
The best way, since it reset into bootloader anyway & (good onya) you have Hard SPL installed, is to use the sd card method.
1. Format sd card fat32.
2. Copy the .nbh file of the os/radio rom you want load Hermes onto sd card and rename to "Hermimg.nbh".
3. Put sd card in Hermes and reset. Follow prompts...
Make sure you have a charged battery as it is pretty battery draining (especially multiple flashes).
If you can't get the radio rom on, you can AT LEAST install a new OS only rom. It will be a good PDA BUT won't work as a phone anymore...
Good Luck...
thank you for reply.
my device do not reboot in bootloader. it stays there. only that RGBW screen for ever.
i was testing it wht plug-unplug usb, and it allways show me if it is serial or usb.... that means that system is functioning.
i try to bootup wht mmc fat, and it didnt work
tell me what files do i need to transfer to mmc? do i need to change name of RUU.....exe to stg else or just nbh thing?
and in what location on mmc should i save it? or just in mmc:\ (root)
and can i hack my radiorom after i setup system? or i need to do that before?
thanx again
btw i am poweruser of symbian, and i am proud owner of smallest s60v3 device (6120).
i found on it samsungs processor.... and i belive that it is similar as windows mobile. and we have a lot of troubles wht rom upgrading... is there any possibility to include you guys in symbian ROM moding? it would be gr8 bcs i didnt cee much skilled developers for windows XP in symbian freak community
btw some guy just told me that he has some java application which enabling write on ROM and if he say truth he will share it wht me.
he is pc/phone servicer, and he is really good as far as i know.
if this thing exists, is there any possibility to extract RUU from exe to pc and i would copy/paste every single file(wht some changes) as i want to do to my nokia hehehehehehehe
wook
"my device do not reboot in bootloader. it stays there. only that RGBW screen for ever." - THIS IS BOOTLOADER...
On the screen it should say what IPL and SPL you have, What are they?
2. Copy the RUU_signed.nbh file of the os/radio rom you want load Hermes onto sd card and rename to "Hermimg.nbh". You can use a radio only rom or a stock carrier rom - after flashing carrier rom and if the radio rom is restored then flash radio of your choice.
As for running windows on a symbian phone, I don't really know but I'd think that it wouldn't work as the symbian os may have hard wired drivers in the device. You'd have to ask some-one else in the know....
Cheers....
ultramag, iv posted spl and ipl version in 1st post
btw i didnt think abt runing winmob on symbian device, i was thinking of making RUU for symbian.
while RUU is rar file, we could make one for symbian, and bricket phones wouldnt be needed to send to service. btw we could then deit rom and remove platsecurity and make symbiansigned useless. then wount be any need for ROMpatching...(it pach ram actualy) all we need is drivers for symbian device and that we dont have
bt smthing will come i am working on clocking my 6120c and so far no sucess
btw, thank you for help, i am going to load mmc tonight (16:42 here)
ultramag69 thank you my friend for suport. iv successifuly get up my system
heheheehehehehe
btw i dont have imei info and Radio Rom version
i think that i should use CID and SIM unlocker?
As I said on the 2nd post, Your radio rom may be stuffed. This could mean its an unfixable brick. You can use the PDA functions BUT you may not be able to restore the Phone functions.
Using the sd card method though, you can try to install a radio only rom (this only tries to install the radio, the OS you have on there will remain the same so even if the radio rom install is unsuccessful you can still use the PDA functions).
You should also try to install a carrier stock rom (rom supplied by your original carrier) as this , on rare occasions, has restored the radio rom.
Good luck in your Endeavour..
Cheers...
i will try to run radioROM.cab from mmc. seems like stg is wron wht my usb cable. it cant get synced wht pc....?
i will veawe its hardware and check "all" tngs from usb to rom and to flash, at least till crystalls
btw this platiform is awsome
wht resco i can edit rom files??? whd i am amased
i just need paint and hex editor
and ill make anything
btw is there any dll exe... decompilers??? and i need to check is there python for wm6
and then ill be able to write my own programs
thanx bro again
You have bricked hardware radio - flashing radio rom wouldn't work. Send it to good service and probably they will repair it.
hmmm, i would sen it right now, but there is no service around...., and i am better in hardware and software more than 75% local servicists....ill gess tht ill figure stg
ppl, i am wondering:
why memory card is displayed in "device:\" as folder? as far as i know it is a disk(fat32) and why i have extended_ROM and option to remove it?
why i cand access to orginal ROM drive? and why winm0b is playing wht virtual drives?
offtopic:
does any1 has experience wht pythonCE? and if there is ziped command samples for pythons compiled library? i would like to get it
Thank you
wook
It is not clear if you fixed your phone.
It does not sound like you have followed ultramag69 instructions very well. Probably because Englsih is not your first tongue and you have little knowledge of PPC.
You need to download a Radio ROM here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Then follow the instructions here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
A few points that you need to understand. Resco can not edit ROM files. Your Hermes does not use a MMC card it uses MicroSD. If you are connected to ActiveSync then your Storage Card shows up as a folder; that's just the way it is! Pretty much all your other questions are answered in the WIKI here: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Hi.
I tried to find this on the forum and wiki, but i couldn't, so i want to ask.
I got a used Softbank X01HT, and seller said it was unlocked, but when i put in my sim i can do things for about 30 seconds, and then there comes a U-SIM screen and it asks me to enter something, i guess ( It's in japanese ).
How can i get this to go away? Is it even unlocked?
ROM: 1.33.761.4
Radio: 1.16.00.00
When i make call to phone i does to through and people can all even though U-SIM screen is there, and when people call, it is possible to go to the menues and such.. But when they hang up it goes back to U-SIM screen.
Please help
I have already read the Post april X01HT thread, though it is not relevant in this case because this is model from 2006.
Thank you
this is SIM unlocked phone (radio version 1.16.00), but your Windows Mobile ROM is the original SoftBank Japanese version that enforces USIM message...
You can flash to some other Windows Mobile ROM, but make sure you check Hard-SPL thread first (sticky in Hermes upgrading etc)
Hi thank you again!
I read something like that in the SIM unlock thread.
So i just need to install Hard-SPL and then flash a ROM?
Do i also need to do CID unlock? (http://forum.xda-developers.com/showthread.php?t=293665)
I would like to be able to write japanese with the phone, so is that possible if i flash? I saw a thread about installing japanese input/output support, is that possible to install on every rom?
And can you reccomend a rom or post link to ROM you think i should install?
THANK YOU! can't wait to start using it.
Now i just tried the Hard-SPL thing. But i get Update error 260 saying my device is not connected. I have ActiveSync 4.5 open and i have synced..
so i don't know.
I don't know if it has anything to do with the USIM screen being on all the time?
I see Active sync closing down as soon as it starts updating.. but then it can't update, right?
easiest way is to use SoftBank SIM for flashing everything, that way you avoid USIM message...
if you dont have SoftBank SIM available, search for welcome.exe on this forum.
SoftBank put a software SimLock in the ROM which can be removed with welcome.exe from imei-check unlocker. (http://www.imei-check.co.uk/m3100unlock.php) Start it up with you phone connected to USB and ActiveSync enabled... After the program asks for some password file, just close it! (close dos prompt window)
About Japanese IME (kanji & kanna input), i prefer flashing some newer English WM6 ROM + installing separate Japanese IME from cab. Old SoftBank's ROM is very slow and limited...
Super CID is just there if you flash HardSPL....
HI, thank you!
I found out that the USIM screen goes away if you just press on the signal bar and say that you don't want to receive signal.. den i can ue it.. And then i could do the Hard-SPL which i did with no problem. thank you!
Ah so if i just download that program and close it down at that time the USIM screen with never come again?
Yea i want to flash it to newer. But i'm not sure which one because i've heard a lot of people broken their phone :/
could to give me a link to a few "good" English WM6 ones?, though i there is probablt many.
i will try out the imei-check thing now ^_^!
Once you flash HardSPL; when you want to flash only Windows Mobile ROM only you dont have to worry about bricking (destroying) your phone. Only flashing different radio could be dangerous.
For the version, you have to find out yourself, there are so many... Check Hermes Mobile 6 threads, there are even some special Japanese cooked ROMs if i remember correctly. Also check user signatures for what versions are different people using...
thanks so much! i managed to get the USIM screen gone with your help.
Ahh i see, but install new version wont it also change the radio? wasn't that dangerous?(sorry if i ask dumb question)
so if i chose this for example: http://forum.xda-developers.com/showthread.php?t=359458 i can still make it with Japanese IME?
i think i will try hehe!
that link you provided is Schap's WM6 Pro 4.31 ROM... It is one of the most stable out in the wild, and it comes without radio, so flashing that one should be safe.
Oh ok thank you! then i will try this.
Last question before i do anything
This that ROM it is still possible to do the Japanese IME thing?
I found this thread
http://forum.xda-developers.com/showthread.php?t=298919
It explains something of getting japanese on phone, was this what you meant by japanese IME? or is there an other method, if yes, please telle me/ give link.
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Click to expand...
Click to collapse
THANK YOU!
That solution you mention should work fine, but newer solution is available. Check http://forum.xda-developers.com/showthread.php?t=445550
Hi! THank you very much! i was finally able to flash the ROM!!
And i have installed the Japanese fonts and Input thing!
It works. but after install i can not sign onto MSN Live Messenger. Is there anyway to fix this problem?Maybe i should change something in Regedit?? Or should i uninstall the fonts again? :/
It gives me this message: There's a Connectivity problem. Make sure you're in an area with good reception and try again.
I have tried over and over and WIFI is up and working..
So any answer i would be so greatful and finally be able to use the phone like i dreamed of !
Thank you.
sorry, i dont use msn, i have no clue about it...
明けましておめでとう。
Ok thank you anyway!!
明けましておめでとう〜
良い年でありますように♪o(^-^)o