Related
Thanks
I'm assuming you mean screen protectors? The original one that came with the phone is great... just try not to get dust underneath it. Makes it unsalvagable
As for other screen protectors... well, you get what you pay for. I bought a pack of 12 for about $15. A $1 screen protector is exactly that.
In terms....
If you're talking about the today screen then yes. Download the .Cab files on your device and open it on your device. Try that for now and if it say like exe. then more then likely you would have to active sync your comp to phone. good luck
I meant screen protector
the one that came with the phone is smaller then the screen.
Very annoying.
Yeag ut do
Try it but dont buy it... your phone will more then likely dent and scratch but it happens over the years. by the time your know it; youll be buying a new phone anyway. Im on my 4 xda over 2 years. IF your with t mobile; they will go into a big change really soon. phone is already in transaction to catch the 3G internet. Save that $15 to your nexts phone! by the time your know it 6 months later you have $45. good luck
I use Boxwave screen protectors with this device and all my past devices. I have good luck with Boxwave. One screen protector will last you 9 months to a year. I normally just carry my Wing (and my previous devices) in my front pocket with the screen turned inwards to my leg. No keys, pens, change or other things in the pocket. Never have had a problem this way.
I use ShieldZone's full case cover(film) on my wing...
even though the place I work doesn't sell them, I still take my keys to the case just to prove the point that cases/protectors are worth it..
I keep my Wing in my pocket, frequently with my money clip and/or pens... 2 months it's still in *great* condition.. sure the cover is getting a bit dirty, but I know when i remove the cover months down the road to replace it it'll probably look like new again
I just ordered a set of protectors from NuShield. They seem like a really great product. I'll let you know how they are when they get here. It was 3 for $11.99 US.
Im into selling phones and one thing I've noticed is that WM phones don't depreciate as much as say a Razr would. I read a comment about someone who says you shouldn't get one (and I respect everyone's opinion,) but that wouldn't be very smart. If you keep your phone in good condition + keep a screen protector on it by the time you come to sell it and buy a new phone you will be able to put more money on your new purchase (with the money made from selling your old phone) than you would with just the 15 you would save from buying a screen protector. For me this is a no brainer. Get a screen protector, and I don't mean the one that comes with it, buy a good one for like 20$.
Atleast once you do you won't care about touching her delicate parts cuz you'll be using protection
I just got my NuShield screen protectors in today and I think they rock. They're of a very strong plastic material that is absolutely clear, and it completely covers the screen, even under the bezel, without using any adhesive. No bubbles, nothing between the protector and the screen, absolutely perfect display. Cannot even tell it is there.
I read a post in another thread where someone bought a sizable skin from bestskinsever.com. I tried it out because they said they had such good luck with it. Its the first screen protector that I have ever put on that actually is invisible. No dust, no bubbles, looks perfect. You use a soap solution before you put it on and slide it into place. I used my fingernail to get the edges of the screen protector underneath the edges of the phone. Seriously, it looks like its not even there. Oh yeah, they are cheap as hell too.
i buyed a schreen protector , exactly to herald .. it cost $22 (it was only one schreen protector) .. i have it about 15 months of full gaming by stylus, and surving net by picsel brovser (a lot of slides by stylus) and i dont have 1 scratch on it... it is realy perfect .. perfect fits on my schreen, and it seems, it is undestroyable... very happy with it ...
i would say, you better buy one more expensive for a long of time than be still buing that, where one cost $1.. (my opinion)
I'll start this thread in the hope that there'll be some good news soon.
I got my Touch Cruise on Friday and the device is absolutely fantastic but there is one huge problem with it. Using it either with the bare screen or with the screen protector supplied in the box, the smudges that get onto the screen are a real issue. It's not a case of cleaning it every day when you get home, it really is a case of pulling out a perfectly clean device, flicking up the cube to fire up the calculator, doing 60 seconds of calculations and then putting it away and even after that the screen is covered with smudges to an extent that bugs me. The saving grace is that, if a good screen protector can help solve this problem, then it's easy to apply as an aftermarket solution.
Do other people see the issue to the extent I do? (And my hands are actually fairly dry, I often have issues getting through fingerprint recognition at US immigration because there isn't enough grease on my fingertips.)
I'm told that Brando are working on a protector and I just had a quick play with my old O2 XDA Orbit which has a good screen protector on it (not a Brando but one of their big competitors whose name I forget but is another make that people tend to recommend) and it seemed to me that it was picking up far less muck than my TC one so maybe Brando or someone can ride to the rescue on this one.
- Julian
There is another thread about screen protectors here.
I use the supplied one without any problems different from any protector I have used. Just get the Veripart screen cleaner and clean your screen with it about once a week. looks like it leaves a coating on the screen. I am not sure about that, but my screen is shiny and nice
By the way, how can you get smuges from a non-greay finger
victoradjei said:
There is another thread about screen protectors here.
Click to expand...
Click to collapse
Ah. Thanks for that. I was trying to do the right thing by posting into the "Accessories" sub-forum so that is where I looked for a previous thread but I did just find the other thread in the main Polaris forum, funnily enough not by looking through the forums but because that thread is the second hit on Google when I did a global search for "veripart screen cleaner" as a result of your reply. I'll definitely try Veripart.
Re: "how can you get smuges from a non-greay finger", I guess they're not totally non-greasy, just less greasy than average .
I'll still get a new screen protector for my TC though because the one that came with my device seems to have a little bit of adhesive missing right down in the bottom left corner, luckily only on the bit that covers the screen surround but, because it won't stick down, it makes it look as if there is a water stain on the device. I also find that the factory screen protector does dull the sensitivity of the screen a bit.
- Julian
I have the same problem with the supplied screen protector.
I found out that Brando will come out with two types of screen proctectors of which on is anti-glare. That's the one I want to try.
Just ordered this one:
http://cgi.ebay.de/ws/eBayISAPI.dll...em=160199157845&_trksid=p3984.cTODAY.m238.lVI
If you don't know German, look at the picture depicting the structure of the material. Seems to be nice - anti-fingerprint, anti-glare, etc. Will report here as soon as I get it. There is no picture of the protector but I strongly hope it will cover the whole surface and not just the display area.
ingenious said:
Just ordered this one:
http://cgi.ebay.de/ws/eBayISAPI.dll...em=160199157845&_trksid=p3984.cTODAY.m238.lVI
If you don't know German, look at the picture depicting the structure of the material. Seems to be nice - anti-fingerprint, anti-glare, etc. Will report here as soon as I get it. There is no picture of the protector but I strongly hope it will cover the whole surface and not just the display area.
Click to expand...
Click to collapse
It looks very interesting. I hope it works out for you. I'll look forward to hearing how it works.
I just experimented some more with my old (now dead) Artemis. Obviously with the device being dead all I can do is wipe my fingers and thumb around the screen with it switched off and then look at how marked it is. This is actually just fine though because the marks show up most when the device is off so the fact that the device doesn't power on isn't really an issue for these tests!
Anyway, I found the email confirmation for when I first placed the order and it was a Martin Fields Overlay Plus Screen Protector and my experiments above confirm in my mind that a good screen protector does make a huge difference as far as fingermarks are concerned, my old Artemis with the Martin Fields protector seems to pick up maybe 10% of the fingerprints compared to the in-the-box HTC protector on my Touch Cruise under about the same amount of finger dragging on each screen.
- Julian
Brando is now selling the antiglare screen protectors. Emailed them and they said that they cover the whole face, not just the touch screen portion. You can get them here:
http://shop.brando.com.hk/prod_detail.php?prod_id=02323&dept_id=&cat_id=0019
db
No, I'm not buying before I see it how it looks like. As I wrote above, I ordered one from eBay. It is 0.5mm more narrow than the screen area. But the worst is, there's not a hole in the surface for the secondary camera - there's a whole area cut out, like with scissors. Otherwise, the surface seems pretty diffuse. I haven't tried it yet, because if I remove and ruin my current protector and I don't like the new one, I won't have any
So I'm waiting for responses/pics from other protectors
Brando's version is unfortunately like the one ingenious got off of eBay - with the large cutout vs. individual holes. Can't imagine it would have been that hard to cut them properly I'd prefer Brando quality with HTC fit.
db
dcbehan said:
Brando's version is unfortunately like the one ingenious got off of eBay - with the large cutout vs. individual holes. Can't imagine it would have been that hard to cut them properly I'd prefer Brando quality with HTC fit.
db
Click to expand...
Click to collapse
I bought one from Brando's for my Orbit 2.
Quality is top as usual.
But:
I think they do the large cutout to make them fit to both, the cruise and the orbit 2.
The result is: You can use them for both device, but they do fit perfect neither for the polaris nor for the orbit 2.
Especially with the orbit 2 there is a large gap at the top of the protected area.
So I have to say, I was used to get better quality from brando's
JueLue
Shame, shame... Hopefully they will make them better at some point. Now I don't want to put mine because I'm afraid that if I don't like it, I won't be able to put the original one again
as i said in the other post..
I ordered both versions of the regular screen protectors from DuraSec. (not the liquid one)
I will post some photos and comments when i get them.
xrrkrrkx said:
as i said in the other post..
I ordered both versions of the regular screen protectors from DuraSec. (not the liquid one)
I will post some photos and comments when i get them.
Click to expand...
Click to collapse
Thanks. Look forward to your post as my standard protectors's already looking suspect.
I ordered the more expensive ("self-healing") protector from Durasec and found it had the same problem as the Brando anti-glare protector: it refracts the light coming from the touchscreen, giving the pixels a broken-up, rainbow effect. Not nice or useful.
Guess I'm going to buy some more HTC ones, even though I ended up crumpling the first one out of frustration (bubbles, dust, etc).
hamishmacdonald said:
I ordered the more expensive ("self-healing") protector from Durasec and found it had the same problem as the Brando anti-glare protector: it refracts the light coming from the touchscreen, giving the pixels a broken-up, rainbow effect. Not nice or useful.
Guess I'm going to buy some more HTC ones, even though I ended up crumpling the first one out of frustration (bubbles, dust, etc).
Click to expand...
Click to collapse
I've first put the one delivered by HTC with the Polaris. Except the fact that the sticker perfectly match with the Polaris Form, it need to be cleaned at least 50x per day..
I've finally buy a set of universal screen protector. Of course you've to cut it by yourself, but the quality is pretty excellent and the price is really competitive (5 pieces for a price less than for 1 brando).
hamishmacdonald said:
I ordered the more expensive ("self-healing") protector from Durasec and found it had the same problem as the Brando anti-glare protector: it refracts the light coming from the touchscreen, giving the pixels a broken-up, rainbow effect. Not nice or useful.
Guess I'm going to buy some more HTC ones, even though I ended up crumpling the first one out of frustration (bubbles, dust, etc).
Click to expand...
Click to collapse
Why the HTC ones rather than the Brando Ultraclear? The thing I hate about the HTC protector is that it is no better than a bare screen as far as fingerprints are concerned. There is a thread running in the main Polaris forum (although a request has been made to the moderators to move it here) where other people are confirming how awful the HTC protector is re fingerpriints and also that the Brando UltraClear, although not as good as the AntiGlare regarding resistance to fingerprints, is a definite improvement on the HTC protector.
I confess that I'm still using the HTC protector but that's because I put it on my device immediately and now it's on I'm waiting a bit to decide what to replace it with. I don't like the Brando cutout but I think if pushed now I'd probably buy one of each Brando and see if I could live with the optical distortions of the AntiGlare and, if not, then use the UltraClear.
- Julian
P.S. I share your frustration re fitting these things; one of my least favorite activities.
I didn't try the Brando 'ultraclear' one -- I guess because I used one of these on a PDA years ago and found it to be 'ultraglare'. If I were sitting anywhere near sunlight, the screen became a mirror.
I suppose in the time since that's just become normal, as screens like the Touch Cruise are very shiny.
Looking at the various posts I think I'll go with the Brando UltraClear...
10$ + 3$ shipping is not so expensive (let's hope it will not be trapped by customs, in France that's pretty expensive even for a 10$ order).
Anyone aware about a way to get them from a European reseller instead of ordering directly to Brando in HK?
Thanks
DuraSec protectors
Hello all....
as i promised earlier i would report back once i got my DuraSec protectors and let you know how they are.
i just got them last night, so i ripped my HTC OEM one off, and put the cheaper "ClearTec" one on. on first impression, it is a slight bit TOO thin, as it is quite hard to get on without flipping and flopping around. Which in the end causes many small bubbles.
After some fiddling, i have it on looking semi-OK, and it doesnt mess with the screen clarity, nor refract light in any strange way that i can tell.
i do have a feeling that it will not last very long... but then again they market it as a temp. protector.
i will get back when i use the "HighTec".....
This is a possible way to improve the standard HTC screen protector which I'm pretty happy with except for one big issue, it offers absolutely no additional resistance against getting fingerprints all over the screen when not using the stylus and this is a big frustration for me.
Recently I decided to clean my protector using regular window cleaner that you can buy in supermarkets (I'm in the UK so I used "Non smear Windolene for glass and shiny surfaces"). I now only bother to wipe down the screen with a cloth every few days rather than after every few minutes of use which is what I had to do before (and yes, I do wash my hands very regularly!).
It's probably partly due to the fact that I've got better at remembering to try to use the fingernail side of my fingers rather than my fingertips but I think that a large part of it is due to the cleaner leaving some sort of coating because even when I deliberately do a few swipes with my thumb, which before would have left marks after even a single swipe, it is now pretty clear.
I didn't spray the cleaner straight onto the device by the way, that just seemed too risky, so I sprayed it onto a paper kitchen towel and then used that to apply the cleaner onto the screen.
For me I think this has improved things sufficiently that I might well just stay with the supplied protector.
- Julian
I just noticed that ZAGG have released an invisibleSHIELD for the Touch Pro 2.
http://www.zagg.com/invisibleshield/htc-touch-pro-2-cases-screen-protectors-covers-skins-shields.php
Just wondering if anyone has it and could comment on it.
Also, the TP2 has an existing plastic cover on the battery cover (look around the volume rocker to see it) and I was wondering how the invisibleSHIELD interacts with this. Should we remove the existing one? or is it designed to go over the existing one?
Cheers
I think you'll find that the "shield" built in is actually just part of the back cover. Try and peel it off. It's not going anywhere. Invisible Shield should fit right over it.
i have the invisible shield on mine, and i have to say i'm not impressed. it is probably mainly due to the way i installed it, but it just doesn't seem to fit all that well. the worst area is at the very left and righ of the screen where it meets the chrome area and wraps around. there is a very slight ridge, and no matter how hard i try i can't get rid of the air bubble running along these edges. it is very small, but considering the invisible shield only protects the top half of the chromed area, i think i'm going to get rid of the front part andx replace it with a martin fields screen protector and leave the back invisible shield part on.
Does the invisible shield actually change the way you use the sylus?
Like I have seen phones where you had to press extra hard after installing the protector
Axeslocked said:
Does the invisible shield actually change the way you use the sylus?
Like I have seen phones where you had to press extra hard after installing the protector
Click to expand...
Click to collapse
Not from the point of view of how hard you have to press, but it does have a "grippy" quality that means the stylus doesn't glide across the screen as easily, and quite often jumps around. Try dragging your finger or stylus across a soft rubber surface and you'll get the idea!
Reading you reaction's this invisible shield doesn't seem all that great...
Looks like it, i use the brando ultra clear, this one is great.. fits perfectly and is very smooth with stylus and finger use!
Ouch~! Can I cancel my order? After reading your comments about it, it really turns me OFF...
Yep, my Zagg should be here anyday now. I have used them before and I'm not to impressed with the rubber feel of it. But I guess you have to sacrifice a good feel and good stylus slide for a scratch free device.
There is nothing I hate more than a scratched up device.
Supertrooper said:
Yep, my Zagg should be here anyday now. I have used them before and I'm not to impressed with the rubber feel of it. But I guess you have to sacrifice a good feel and good stylus slide for a scratch free device.
There is nothing I hate more than a scratched up device.
Click to expand...
Click to collapse
The feel with the martin fields screen protector is supperb. Seriously, i prefer to use the stylus with it. Just one complaint about that, it reduces the bright like 10%. Not a big deal anyways.
So once you apply one of these "shields" ---and suppose you don't like it...can you remove them? What effect does it have on your phone? I have never used a screen protector or a shield, so bare with me on this type of q. Thanks.
deleted. duplicate
cabranscom said:
So once you apply one of these "shields" ---and suppose you don't like it...can you remove them? What effect does it have on your phone? I have never used a screen protector or a shield, so bare with me on this type of q. Thanks.
Click to expand...
Click to collapse
Yes they can be removed, and shouldn't leave any kind of residue on the phone. I've always had a screen protector of one kind or another on my phones purely because with te way I use and carry them, they inevitably end up scratched, so I'd rather it was just a cheap bit of plastic that I can easily replace taking the abuse than the screen itself!
If you put the full body protector on correctly, take your time and don't get in a hurry. It will really be worth it, especially for protecting this high dollar of a phone. For me it gives me better grip so the phone wont slide out of your hands, plus you can put it in your pocket with keys and coins and it will still come out scratch free. But the only downfall is the sleek feel of the screen during finger/stylus swipes.
What I did was just applied the back cover portion. I uses the Brando Crystal Clear Screen Protector for the screen only. I have a better grip to the phone and still have the smooth finger swipes on the screen. I can freely leave it on any surfaces in peace of mind knowing that the back of the phone is well protected. But the only downside of it is, the edges of the films will for sure collect dusts and it might turn yellow after few months. I misses the sleek feel of the phone in my hand. I might remove it someday... and let it be scratched, then just buy a back cover to replace it.
how to recieve 40% off (discount) in zagg.com?
it's very easy:
u might buy "gift e-card" with promo code "ZAGG20". than u will recieve your gift e-card code on e-mail - you may buy screen protector with gift code and with promo code "ZAGG20" or " PROTECT20".
at all u recive 20%+20% = total some more than 40%
Jabader said:
how to recieve 40% off (discount) in zagg.com?
it's very easy:
u might buy "gift e-card" with promo code "ZAGG20". than u will recieve your gift e-card code on e-mail - you may buy screen protector with gift code and with promo code "ZAGG20" or " PROTECT20".
at all u recive 20%+20% = total some more than 40%
Click to expand...
Click to collapse
I wish I knew this before. I just received mine in the mail today and installed it. It feels to be somewhat not as thick and grippy as the one I installed on one of my other devices about 8 months ago. Or maybe its just me, either way it doesn't feel bad and the front screen isn't as bad as I thought it was gonna be. Maybe their making the invisible shield with a better feel with the same great protection.
But I know one thing hasn't changed. They are still a pain in the butt to put on correctly.
My shield should arrive in 2-3 days...i'll get back to you guys when I've put it on the device....
Jabader said:
how to recieve 40% off (discount) in zagg.com?
it's very easy:
u might buy "gift e-card" with promo code "ZAGG20". than u will recieve your gift e-card code on e-mail - you may buy screen protector with gift code and with promo code "ZAGG20" or " PROTECT20".
at all u recive 20%+20% = total some more than 40%
Click to expand...
Click to collapse
grr
wish I had this aswel.
Mine comes 2moz...will let you know how good/bad it is
how do these compare with the standard htc screen protector? (of course except zagg)
Hey guys, please vote here - who use screen protector with own TP2
And those who use, please describe here who is the manufacturer of your screen protector and your experience, how good is it for you.
Most recent HTC devices have come with pretty good screen protectors included in the box. I didn't use a screen protector on my first device, and I'm not making that mistake again.
anyone knows why they don't install it from the factory?
I voted and i own an x1. I use.
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
ohyeahar said:
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
Click to expand...
Click to collapse
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
test157 said:
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
Click to expand...
Click to collapse
That's true, but when you use your device for some months without any protector, it will never be so clear as with a screenprotector (that you can replace when needed )
Ranney
Based on what I read in the accessories forum, I decided to try a Martin Fields one. Had it on for 2 days now - so far, so good. The one that came with the phone kept peeling off at the bottom edge near the buttons.
I didn't bother with my Vario III, as the ones I tried seriously affected the screen responsivness. Of course it got a key scratch in the first 3 months:-(
On my TP2 I installed the supplied one, and will get a Martin Fields one.
However I've got to return the unit (dodgy radio), so it is vital not to scratch it before returning it!
I messed upp my original screen protector
So i bought the Copter screenprotector from Skalshop.se it's a bit rubbery, but other than that it works good. It came with some liquid spray for aplying the protection. A bit tricky to apply but worked good in the end.
Martin Fields - where from you guys are buying them? I don't see them at ebay for TP2
also - are they really the BEST? or they just have the highest price?
The store from which I bought my TP2 gave me another screen protector - I haven't used the one that came with the device. Probably cost them less than US$1-2 to buy in bulk - I never pay more than US$8 for one retail
Using the one supplied with the evice and it works perfetly (I was against screen protetors when I had a Hermes, but with TP I can barely see it)
I once had a device and when I applied the screen protector I hated it. It improved sunlight visibility by refracting the light, unfortunately this made it harder to read fine print on the screen. I also couldn't remove the protector and was stuck with it. Another one I had tried before that one which was removable, reduced sensitivity too much.
Those are reasons not use one. But as long as the available protectors can be removed in case you don't like them, then it's worth trying them out. That way you don't risk your screen unecessarily.
SEQ said:
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
Click to expand...
Click to collapse
That's right! I use it and it's better than the one that HTC gives us: I have a new one because it was removed while in my pocket.. But now I'm happier!
I´m using touchscreen phones for many years (since my first PALM ) and i´ve noticed that the new screens are much more resistent. I think that you loose quality if you use a screen protector.
Just don´t put your phone in the same pocket that coins, keys,... and use it´s cover when putting it in a bag.
one other advantage with a phone like this should you choose not to use a screen protector is that since the phone has such a large screen and it's so touch optimized you won't get as much wear and tear on the common points of contact (like the "e" on the onscreen keyboard).
I use Proporta Screen Protectors. After I had used then in my Asus P535 I do not want another brand. They protect very well the screen, they were washable and also doesn't change too much the sensation of the touch with the pen or even with fingers.
I dont use one for a few reasons. I dont put my TP2 in any pocket with coins etc. I am pretty careful with it.
Although most importantly im insured on it, accidental damage w/ no excess to when the time comes it gets a bit dodgy ill smash it up and get a new one. If ive still got the TP2 when my contract runs out/upgrade ill probably wap a screen protector on then.
You're struggles are over! I have been looking for the best screen protector for edge devices and I had to tell everyone. No more touch sensitivity issues, no pressing harder, no more bouncing screen, and no more popping off screen protectors. The Whitestone Dome Glass Screen protector is the best! I made an install tutorial because the worst part is installing it. It's complicated, but watch my video for tips and tricks and you will be an expert in no time:
https://www.youtube.com/watch?v=RaNK59tMsBQ
Warning: As seen in the video at the 10:26 mark it is very important as a beginner that you make sure the surface is level (Use a physical bubble level and have business cards nearby) and leave the alignment bars (Plastic L Shapes) on during the curing process with the UV light, otherwise the screen protector may slide off of the phone. I was doing this for a friend at his house with the table he had, therefor as you saw at the 10:26 mark it began to slide away. Me doing so many installations I was use to this sort of thing happening, and quickly corrected the issue. I find the alignment bars to get in my way when moving the screen to the most case friendly position. However when I started out I did use these alignment bars, think of them as training wheels. Just be sure when you manually align the screen protector that the alignment bars are not lifting out of their 3 bumps and that they are not lifting your screen. Make sure your surface is level otherwise the adhesive could pour over the edges of the phone. Business cards help immensely, along with not working on installation in the middle of a 2 piece table.
Review
Before I continue please keep the "It's too expensive" posts out of here. Other glass screen protectors, Otterbox, Zagg, ect are the same price. You are paying $45 to protect a $800+ phone. Insurance is a $200 deductible. So it's not expensive compared to paying a deductible. You also get an added bonus... The UV light can be used by women or given to women as a gift to dry their nails. Oh you're a guy and have no use for it? Ever had a car windshield chip?
You can get a repair kit and use the UV light to dry the resin, ever paint? UV light to dry the paint, UV light to dry glue, UV light to tan your wedding ring finger... Just kidding don't do that last one. Anyway now that I got that out of the way I came from a S7 Edge and my struggles to find the perfect screen protector were very difficult. I am extremely OCD with my phones and worried so much about cracking the screen. I used the Otterbox Defender after trying screen protector, after screen protector, and after getting frustrated with the touch screen sensitivity issues with the Otterbox Defender due to the built in plastic screen protector and dealing with dirt and easy scratches, I went back to my Note 4. Then the S8 came out and I again attempted to go to an edge phone, and after purchasing the Whitestone screen protector I will say it's made the phone feel just like I never had a screen protector at all. I no longer have a screen protector that for some silly reason only had glue around the edges which made the protector springy/bouncy on every touch. Not to mention that most times the protector would pop off due to lack of glue. This isn't a problem with the Whitestone due to the fully adhesive protector. There's no touch screen sensitivity issues and it feels like I am touching a naked screen. Plus my edge features actually work.
Q&A
Q: What cases work with it?
A: Otterbox Symmetry and Commuter, defenders do not work. I haven't had any other case tests, I am about to purchase the Mophie battery case and test it out. If you have any cases that work well, please let me know so I can get a compatibility list going
Confirmed List
Commuter
Symmetry
UAG
https://youtu.be/sScL3ZyGTgI
Q: Can I put a case on after installation?
A: No you need to wait 24 hours for curing.
Q: Can I use the phone after installation?
A: You will need to wait 1 hour.
Q: How long should I set aside time for install?
A: If you have never done it be prepared for around 1 hour plus the 1 hour wait after before you can use your phone
Q: Do you know if there is a warranty on the product?
A: I'm not sure, I couldn't find anywhere on there for warranty info. I know I received a cracked one and ended up having to purchase another one, file a claim on Amazon, and send the cracked one back.
Here's a review of the Mophie case with the Whitestone:
I can confirm that it works great with uag cases. Also I found a video where they tested 50 cases with Whitestone dome:
https://youtu.be/sScL3ZyGTgI
Great post and vid. I am installing this today and this helps alot. Crossing fingers.
Sent from my SM-G950U1 using Tapatalk
yoyoche01 said:
Great post and vid. I am installing this today and this helps alot. Crossing fingers.
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Sorry can't edit previous post.
Install done.....successful! The biggest part is applying the epoxy, it is very thin, almost like water. Slowly loosening the cap on the epoxy tube and leveling the puddle is crucial to success. So do it slowly and use cards to level the puddle before releasing the remainder of the ep oxy. Then make sure it flows to the entire screen and you are golden. This video with tips is golden.
Thanks[emoji2]
Sent from my SM-G950U1 using Tapatalk
TheGame7 said:
You're struggles are over! I have been looking for the best screen protector for edge devices and I had to tell everyone. No more touch sensitivity issues, no pressing harder, no more bouncing screen, and no more popping off screen protectors. The Whitestone Dome Glass Screen protector is the best! I made an install tutorial because the worst part is installing it. It's complicated, but watch my video for tips and tricks and you will be an expert in no time:
https://www.youtube.com/watch?v=RaNK59tMsBQ
Review
Before I continue please keep the "It's too expensive" posts out of here. Other screen glass screen protectors, Otterbox, Zagg, ect are the same price. You are paying $45 to protect a $800+ phone. Insurance is a $200 deductible. So it's not expensive compared to paying a deductible. You also get an added bonus... The UV light can be used by women or given to women as a gift to dry their nails. Oh you're a guy and have no use for it? Ever had a car windshield chip?
You can get a repair kit and use the UV light to dry the resin, ever paint? UV light to dry the paint, UV light to dry glue, UV light to tan your wedding ring finger... Just kidding don't do that last one. Anyway now that I got that out of the way I came from a S7 Edge and my struggles to find the perfect screen protector were very difficult. I am extremely OCD with my phones and worried so much about cracking the screen. I used the Otterbox Defender after trying screen protector, after screen protector, and after getting frustrated with the touch screen sensitivity issues with the Otterbox Defender due to the built in plastic screen protector and dealing with dirt and easy scratches, I went back to my Note 4. Then the S8 came out and I again attempted to go to an edge phone, and after purchasing the Whitestone screen protector I will say it's made the phone feel just like I never had a screen protector at all. I no longer have a screen protector that for some silly reason only had glue around the edges which made the protector springy/bouncy on every touch. Not to mention that most times the protector would pop off due to lack of glue. This isn't a problem with the Whitestone due to the fully adhesive protector. There's no touch screen sensitivity issues and it feels like I am touching a naked screen. Plus my edge features actually work.
Q&A
Q: What cases work with it?
A: Otterbox Symmetry and Commuter, defenders do not work. I haven't had any other case tests, I am about to purchase the Mophie battery case and test it out. If you have any cases that work well, please let me know so I can get a compatibility list going
Q: Can I put a case on after installation?
A: No you need to wait 24 hours for curing.
Q: Can I use the phone after installation?
A: You will need to wait 1 hour.
Q: How long should I set aside time for install?
A: If you have never done it be prepared for around 1 hour plus the 1 hour wait after before you can use your phone
Q: Do you know if there is a warranty on the product?
A: I'm not sure, I couldn't find anywhere on there for warranty info. I know I received a cracked one and ended up having to purchase another one, file a claim on Amazon, and send the cracked one back.
Click to expand...
Click to collapse
Hello TheGame7, this is Whitestone.
Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.
If you have any questions or feedback that you would like to give us please do so!
Thank you
P.S. We apologize for not being able to directly link our Facebook page. We have just started using xda to communicate with the public and we cannot post external links at this moment.
reyals1 said:
I can confirm that it works great with uag cases. Also I found a video where they tested 50 cases with Whitestone dome:
https://youtu.be/sScL3ZyGTgI
Click to expand...
Click to collapse
Thank you for the info! I am one guy so testing that many cases would have proved to be difficult for me. I have added your confirmed case along with a link to the video in the original post.
yoyoche01 said:
Great post and vid. I am installing this today and this helps alot. Crossing fingers.
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
I'm sure all will go smoothly, don't be nervous, I was at first, but there absolutely is no reason to.
yoyoche01 said:
Sorry can't edit previous post.
Install done.....successful! The biggest part is applying the epoxy, it is very thin, almost like water. Slowly loosening the cap on the epoxy tube and leveling the puddle is crucial to success. So do it slowly and use cards to level the puddle before releasing the remainder of the ep oxy. Then make sure it flows to the entire screen and you are golden. This video with tips is golden.
Thanks[emoji2]
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Happy to assist. My failures are your success
Whitestone Dome Glass said:
Hello TheGame7, this is Whitestone.
Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.
If you have any questions or feedback that you would like to give us please do so!
Thank you
P.S. We apologize for not being able to directly link our Facebook page. We have just started using xda to communicate with the public and we cannot post external links at this moment.
Click to expand...
Click to collapse
Wow I can say I am pleasantly surprised. I didn't think that I would catch the attention of Whitestone themselves. Absolutely brilliant idea with the screen protector I must say! I really appreciate the positive feedback and will make note of your feedback in the topic and video! I do typically remove the alignment bars pre-cure as they get in my way for aligning below the camera. They tend to lift up and sometimes lift the screen protector up while I adjust towards the edge of the camera. My video is the perfect example of making sure you have a level surface and I will make a note in the video and in this topic that newer purchasers of Whitestone will want to have a physical bubble level nearby to complete the task or potentially have level issues as shown in the video or to be sure and keep the alignment bars installed and make sure to keep an eye on the edges for any possible lifting.
@Whitestone Dome Glass
Will there be replacement screen sets be available in the future? So glass, loca glue, alcohol pads and microfiber cloth? Since the curing light and rigg are re-useable it could means easy replacement at much lower cost.
reyals1 said:
@Whitestone Dome Glass
Will there be replacement screen sets be available in the future? So glass, loca glue, alcohol pads and microfiber cloth? Since the curing light and rigg are re-useable it could means easy replacement at much lower cost.
Click to expand...
Click to collapse
Hello reyals1, its Whitestone.
We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!
I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Whitestone Dome Glass said:
Hello reyals1, its Whitestone.
We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!
I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Click to expand...
Click to collapse
Please can you give a link to buy?. I bought in europe from mobilefun.co.uk but I don't find any replacement kit. After 2 week screen show some scratch that I can't explain but I don't want buy full package
raimondomartire said:
Please can you give a link to buy?. I buy in europe from mobilefun.co.uk but I don't find any replacement kit. After 2 week screen show some damage but I don't want buy full package
Click to expand...
Click to collapse
Since the replacement kit is only 5$ cheaper than a new kit (on amazon) it might be easier to buy a complete kit and sell the uv light to a woman who wants to use it for her nails.
The replacement kit should not cost more than about 10$, imho
Whitestone Dome Glass said:
Hello reyals1, its Whitestone.
We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!
I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Click to expand...
Click to collapse
Do you have any plans to sell these on amazon UK at any point in the future? I really want to try one but would rather use Amazon to a third party site to ensure I get a genuine kit.
faybarn said:
Do you have any plans to sell these on amazon UK at any point in the future? I really want to try one but would rather use Amazon to a third party site to ensure I get a genuine kit.
Click to expand...
Click to collapse
Hello faybarn, its Whitestone.
We currently do not sell on Amazon UK, we are still working on expanding our market! We may be able to sell on Amazon UK in the future. If you are still interested in buying our product, you can purchase it from Mobilefun.
If there are any further questions or feedback please let us know!
Thank you!
To anyone wanting to know the Mophie S8 and S8+ cases work great with this screen protector! I'll make a review video soon for it. The top of the case separates and you slide your phone in (no more plopping it in and out of a case hoping it doesn't touch the screen protector) then you slide the top down and it fits perfect. It's a 3300 MAH battery pack and from 25% with the phone on, it got me to 90% while I was using the phone. It also feels like it matches with the curvature of the phone. I recommend trying it out in store, as it is a bit heavier, but no where near as heavy as a ZeroLemon 10,000 MAH battery I had for the Note 4. Attached are some screenshots with the case and screen protector. Oh the speaker redirect to front is really nice too!
Here's a review of the Mophie case with the Whitestone:
Hi
I've bought one, but I mixed two align bars and now I don't know which align bar is for top and which is for the bottom. They are a little different. as you can see in pictures one has a small sticker attached to it at 45 degree angle while in the other one it is attached straight.
can anyone help to place these correctly?
If fitting this goes horribly wrong, or if the protector gets damaged in an accident later, how easy is it to remove it again after the glue has cured and will any residue be left on the screen?
Andre
andrewilley said:
If fitting this goes horribly wrong, or if the protector gets damaged in an accident later, how easy is it to remove it again after the glue has cured and will any residue be left on the screen?
Andre
Click to expand...
Click to collapse
Look at this video, this will answer your questions, it's very clear
It does seem to stick very well to your phone so that's good, I hate the usual (crappy) tempered glass protectors that only have glue on the sides... 1 "wrong" case and *pop* there it goes :/
has anyone try out the combination of spigen neo hybrid with the whitestone dome?
pan_zhengwei said:
has anyone try out the combination of spigen neo hybrid with the whitestone dome?
Click to expand...
Click to collapse
Yeah...i have it for few months...great combo
Sent from my SM-G950F using Tapatalk
Proday said:
Yeah...i have it for few months...great combo
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
do you mind sharing how's the alignment of your protector? mine doesn't seems to fit along with the case