Was thinking of ordering one of these since i had a similar one for my treo, just wanted to see if anyone has used one and how they like it...thanks
http://cgi.ebay.com/Cingular-8125-V...ryZ48673QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
yeah it looks nice but is bulky. you can still pull out the keyboard. overall a nice case. has a clip too.
SH4YD33 said:
yeah it looks nice but is bulky. you can still pull out the keyboard. overall a nice case. has a clip too.
Click to expand...
Click to collapse
does the case stay on the phone securely?
I just saw that. Might have to try it for my son's 8125. He didn't like the aluminum case -- said it felt like he was carrying around a brick in his pocket-- and he REFUSES to use a belt clip (as in with the leather case I bought him). This might be an alternative solution to BOTH of those for him. Doesn't look as bulky to me as the aluminum case.
Cases
Hi there. This case looks nice. Please let us know if you give it a try. I just received a leather case. I sort of like it but always looking for something better.
Hey, I've got a crystal case on its way so once I receive it I'll post about it. It should be here by the middle of this week.
Hi there. I went ahead and ordered that crystal case as well. Should be here early this week.
I also just ordered the crystal case. Its coming form Hong Kong. So its probable a cheap rip off.
But I hate the leather case that came with my 8125.
And the alum cases is like carrying a paper weight around.
I think once the cheap plastic molds to your phone it will be nice.
Should be here next week also.
And I'll give it a good review.
Case Logic
Hi there. Received my crystal case from Hong Kong. Don't like it. The back piece just is not secure enough and I can see the phone popping off and flying head first into a cement floor and goodbye $428 Ebay non insured Phone. So far the leather case I bought is the winner of cases. I just don't like having to unsnap it every time I use the keyboard, and the phone can push out of the top with a little pressure. Still searching for the ultamate case.
Alright, I finally got my crystal case.
Pros:
-It was cheap, so at least I didn't waste alot of money.
-The front part of the casing stays on very well.
-It looks really nice.
-Keeping it clipped on my belt and using it without having to take it out of a leather case is convienient.
-The screen Protector works very well.
-*Most* of the buttons on the phone are still easily accessible.
Cons:
-The back part of the casing does not stay on well.
-It's really annoying to release the phone out of the belt clip. Even more annoying than having to take the phone out of a leather case.
-The two halves of the case don't fit well together, so the edges are uneven.
-With the keyboard slid out, the two soft buttons at the top of it are almost covered by the top of the case, making them really hard to use.
-The case also almost covers the Camera button, making that feature of my phone a pain to use.
Overall, I'm not really impressed, and I would not recommend buying one. The worst part about the case is that the back half of it won't stay on (that's right, the part that clips onto your belt), which worries me because I don't want to turn my phone into a paperweight while walking down the street. Even clipping it into the belt clip and just pulling slightly on the front of the phone, the whole back of it came right off. The front stays on too well and is a pain to take off. A good idea, a good attempt at a case, but not the best engineering.
Ok, I give you the ultimate case. For me anyway. It has replaced my wallet. The main part of the case I got off of ebay I think. It was actually for an audiovox pda. Search on ebay for XV6700 or PPC6700. The phone and screen location match the wizard.
It has three credit card slots for my most used cards. It has slot for full size sd card and stylus holder. (The one in the phone sucks am I right?) It certainly doesnt fit in a pocket (not even a large one) but the belt clip swivels, and is very tight. I clip it on my pants when I ride my motorcycle, and even at 70-80mph it has not fallen off yet. You actually have to yank pretty good to get it off (I know that doesnt sound too clean, you know what I mean) The snap is magnetic so it is also very secure, and the phone will not come out unless you open the flap.
I had to cut a hole in the bottom elastic so I can charge the phone while it is in the case, and I drilled a hole in the leather where the ear speaker is just in case I need to quickly answer the phone.
The extra pouch on the side is just a credit card case I bought at walmart. It was in the section by their dayplanners. I used some auto trim tape to stick it on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
hi all,
Anyone found a silicone case for diamond 2??
looking forward for one..
Where can i get it??
Thanks
Diamond 2 - Topaz - Skin case
Diamond 2 - Topaz - Skin case
http://cgi.ebay.co.uk/Skin-Case-for...14&_trkparms=72:1683|66:2|65:12|39:1|240:1318
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
God those are ugly. Why would one go out of ones way to buy a beautiful device and the stick that on it?
what would you guys recommend as a decent protective yet slimline case for this device, preferably allow you to use the device whilst it's in the case. I've ordered the D2 but am deciding on what case to get
ZAGG
DaBountyHunter said:
what would you guys recommend as a decent protective yet slimline case for this device, preferably allow you to use the device whilst it's in the case. I've ordered the D2 but am deciding on what case to get
Click to expand...
Click to collapse
I love invisible shield.... I used on on my diamond, and on my Ipod..
Still waiting for them to release the version for the Diamond 2! However.. I WILL be buying one!
Juggles said:
I love invisible shield.... I used on on my diamond, and on my Ipod..
Still waiting for them to release the version for the Diamond 2! However.. I WILL be buying one!
Click to expand...
Click to collapse
where can get??
www.zagg.com
thats where they are!
Invisishield
Wouldn't invisishield still require a case? It looks like the screen would still be very susceptible to dings, etc. that would kill the handwriting recognition.
I ended up ordering this:
http://www.blueunplugged.com/p.aspx?p=138216
and one of the silicone skins above. Got the leather case on me now. Pretty nice and a tight fit. Right side of it covers the end call button a bit but other than that it's all right. Would prefer if the leather was a bit thinner on the screen as it feels like it's recessed now. Regardless of that though I can still hit everything I want to on the screen so that's fine. The flip lid is hard and solid (must have thick card or something in it) so the screen is protected easily when it's shut. Also comes with space for memory cards and other plastic cards. Supplied with a removable screw on belt clip too! Doesn't add much bulk or weight to the phone and slips in nicely into my jeans pockets.
The best silicon cases are made by Capdase. I got my case for my HD a month ago. I checked, they don't have any yet but I am sure it will be available soon. What I will do is get a cheap replacement for now and wait for Capdase to come out with one. The one I have is non slippary and dust proof and and and it slips into my pocket nicely. Other silicon cases sticks to cloths and it's hard to get out of your pocket. It's not cheap, mine cost around $80 HKD which is around 6.50 GBP or 8 Euros. Hope this helps.
Nope
tdaly001 said:
Wouldn't invisishield still require a case? It looks like the screen would still be very susceptible to dings, etc. that would kill the handwriting recognition.
Click to expand...
Click to collapse
Nope.. I had one protecting my Diamond for 7 months... didnt effect ANYTHING. I dropped it a few times as well.
The IS is indeed very good
I have only seen it on a number if iPhones but it is as strong as they claim
We even tried the compass/knife test and scratched the hell out of it...or so we thought
It's very durable and did not damage the phone at all - Only downside is by the time it comes out (unless it is already), we'll all probably have a few light markings on it - no matter how well we keep it.
Something to note is the TD1 had a horrible procedure to apply it because of its curves/or lack of them ... I feel the TD2 will be much easier but lets see
Received my silicone case from xell_uk today ordered on the 30th April. Have to say it's a lot better than I thought it would be! Fits the D2 perfectly. Nice sized cut outs so you can easily access the ports and stylus and is snug and secure. Buttons are slightly more accessable as well compared to the other leather case I ordered. Device does look quite neat in this jacket too!
DaBountyHunter said:
Received my silicone case from xell_uk today ordered on the 30th April. Have to say it's a lot better than I thought it would be! Fits the D2 perfectly. Nice sized cut outs so you can easily access the ports and stylus and is snug and secure. Buttons are slightly more accessable as well compared to the other leather case I ordered. Device does look quite neat in this jacket too!
Click to expand...
Click to collapse
Any pictures??
Thanks
Pictures of black silicone case for Diamond 2
As requested... Pretty good fit if I do say so
Decent sized openings as well for port and stylus. Not bad for under £5 delivered.
in Taiwan , we also got a grey one
and I bought it with other 2 color (b&w) cost 90 NTD. (ABOUT 2~3 USD)
and I thought the grey one is the best on Diamond2....
and this is the first post from me on XDA
it I said anything wrong, please tell me.
Also found this:
http://www.usbfever.com/index_eproduct_view.php?products_id=1219
From Brando
... and I ordered from Brando.
http://brando.com.hk/bw-htc-touch-diamond-2-silicone-case_p03343c1035d039.html
Any information about this back cover?
http://www.slashphone.com/alternate-htc-touch-diamond2-battery-back-cover-285598
Looks good!!!
akash_84 said:
The IS is indeed very good
I have only seen it on a number if iPhones but it is as strong as they claim
We even tried the compass/knife test and scratched the hell out of it...or so we thought
It's very durable and did not damage the phone at all - Only downside is by the time it comes out (unless it is already), we'll all probably have a few light markings on it - no matter how well we keep it.
Something to note is the TD1 had a horrible procedure to apply it because of its curves/or lack of them ... I feel the TD2 will be much easier but lets see
Click to expand...
Click to collapse
I've ordered my IS. Should arrive in a few days. http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
I don't get it. Isn't the screen the most important part of the device? Why protect the back and sides only?
Can someone recommend a solution to this?
FYI all: I got the silicone case, and it DOESN'T fit perfectly around the device. On the left the case is a bit loose, so you can see the device peeking... this can be seen in pictures of the silicone casing everywhere. So be aware...
Here's the case - http://www.amazon.com/gp/product/B006PWGESY/ref=oh_o00_s00_i00_details
Just received it today. The leather and stitching look nice and seem like they are of good quality. The inner padding is soft and so I doubt it would mess up the screen.
It has a few different stand angles and it is pretty sturdy when angled (doesn't fall out of the grooves).
When the tab is angled, the speaker isn't covered at all so there aren't issues with the speaker being blocked.
I really like the look of it since it doesn't cover the bezel like other cases.
The only things I don't like have to do with the tabs that hold the tablet in place. In the very last picture I post you can see the tabs that hold the bottom right and bottom left corner of the tablet in place. You have to pop these out when using the angular stand. It's a pain to pop out because it is a very tight fit. I'll probably just leave the bottom corners out and not held in place. Also, when you close the front cover, the tab that holds the cover closed isn't that tight of a fit so it easily pops off.
Overall, it's a decent case for $15 shipped.
Photos:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the case i'm waiting for in the UK.
I had the same on my OG Transformer and it was great.
Nice review! I have the same exact case. As stated my only concern with the case is the bottom tabs where the tablet pops out so you can stand it up. Mine are tight as well and it makes me nervous to keep popping it and out. Other than that it seems like an overall nice case.
More pics. Dont use the bottom two tabs. Sweet case.
Sent from my Transformer Prime TF201 using Tapatalk
I got this as well and feel the same about the bottom two tabs. I wonder if it's the same with the Blurex, Moko and Verteks cases.
I'm sure they have the same problem. These cases look identical except the branding. But for 15$ it's not bad. It's a good case for carrying the tab around. I'm looking into a nice sleeve for when I take the tab + dock around.
Someone on another forum said that they successfully loosed up the bottom two tabs with some pliers.
how much does the case add to the thickness of the tablet.
+1 on bottom tabs. I just don't use them at all.
I got mine for $10 from amazon, free shipping
Returned my prime to Newegg.. Going to go with the tf700. If anyone wants this case and the extra carbon fiber skin and screen protector by skinomi that I have, shoot me a PM. Good luck. To you all
I hope this is not a stupid question, but does the case close with the dock attached?
Took my tablet out today and I'm really shocked at the quality of the spinned/brushed finishes. After examining under a bright light I saw several scratches. I was really careful. The tablet itself came into contact with nothing but my hands and the cushion of the laptop bag. Granted it wasn't microfiber but still. I had a Zune HD for 2 years and it had no problems. The back is flawless despite much harsher treatment I've given it over the past year or so such as tossing it in the same pocket with keys. Only the laser etching and plastic is scratched. The brushed aluminum finish is flawless. The screen is close enough. I hate using cases but it looks like in this case I have to or my heart will hurt =(.
I got mine today too, I like how thin it is but those bottom tabs definitively suck. My tab that holds it closed is actually fairly strong but that may wear out, I like the case but I have seen other cases I liked more, but for the price this one is awesome.
I received this case as well and I think it's a total POS. What's worse is that seller totally ignoring my requests or either a replacement or a return. Stay clear, you have been warned.
I recently received this case and had purchased it because I also own a Poetic Case for my TF101. The thing I don't like about this case vs the one for my TF101 is that there is a crease down the front of the flap that covers the screen which isn't there on my TF101 Poetic Case. This causes the tablet to not stay secure or stand up properly in the grooves if you have it laying on any surface that isn't flat (i.e. my lap, bed, or merely holding it).
The case for my TF101 is more sturdy than this one because it doesn't have the grove down the front flap and I was quite used to being able to holding it in my lap when I commute into work or in my hand without it falling out of the grooves everytime.
I also agree with the other comments about the bottom corners being too stiff but I guess others have been able to fix this with pliers. For $15, this will work for now but I hope to find something better in the near future. I do like the minimalistic look in that it doesn't cover the front screen but having it skip out of the grooves is somewhat annoying.
Shoops said:
Nice review! I have the same exact case. As stated my only concern with the case is the bottom tabs where the tablet pops out so you can stand it up. Mine are tight as well and it makes me nervous to keep popping it and out. Other than that it seems like an overall nice case.
Click to expand...
Click to collapse
It's hard to take out at first but eventually it will come off easier. I ordered this as well but I have similar style for my daughter ipad with similar situation.
Just wanted to give everyone a heads up. This case is awesome. I first wanted one when I got my Skullcandy case for my iPod touch and have been waiting for one built for an Android phone since. I like the case because it doesnt fall apart like other hard cases when its dropped. It slides together with the small black bottom piece and stays together. I found it pretty cheap on eBay and would highly recommend it. Matches the phone colors perfect with the deep red.
http://www.bodyglovemobile.com/product/htc-rezound-icon-case-red-flat-back-no-clip,339,19.htm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice! Thanks for the heads up. How difficult is the case to get off incase you need to do a battery pull?
just ordered one in red. i was stuck between the commuter case and this icon case. for 8 bucks shipped. why not?! thanks
Pretty easy. It fits snug because of the felt lining inside the case but it's easier than one of those hard jelly cases
Cool, thanks!
@quikfinger00 is this the auction you bought from? http://www.ebay.com/itm/Body-Glove-HTC-Rezound-Icon-Case-Red-Flat-Back-Free-Shipping-9248201-/120840910311?pt=PDA_Accessories&hash=item1c22adf5e7#ht_918wt_1141
+1. This case is awesome. I've had it for a month. Last I checked, Amazon also had it for a decent price. (Not as cheap as eBay though)
...Sent from my Tab
Yup! Surely is ill let you guys know how it is when I receive it in the mail
Sent from my HTC Rezound
thanks 06stang and quikfinger00. I just bought one off ebay as well. I also have the commuter so I'll let you guys know what I think about the differences once it comes in!
Hey fellas. My case came in yesterday! this case surpassed my expectations. The red color is more of a dark metallic color and actually looks pretty beastly. All my prior phones (blackberries, voyager, incredible, DROID x, thunderbolt, gnex have had black cases but I really have to say that the color on this case is the shnit. I love the soft rubber feel and like the nice lip around the screen. Thin enough to keep the phone thin but thick enough to keep the phone safe in case of drops to the face. The interior has a quality feel (soft velour) to it and the phones fits snugly in the case. The case is also easy to connect together and remove for easy battery swaps. I have a otterbox commuter case coming in as well but I think I'll be keeping this one on more often except for when I need added protection or a more professional look for business meetings, etc, etc. I'll post pics tomorrow and will post back about my quick thoughts for the commuter case..
Sent from my HTC Rezound
Hey guys, so I've been using the body glove case for a couple days now. I definitely like the slimmer form factor compared to the commuter.
Pros: Definitely slimmer then the commuter.
It fits and covers the phone nicely so you see the whole screen (the commuter covers about half the htc logo).
Quick to get off in case you need to pull the battery.
Appears to be pretty sturdy and has a really snug fit.
Has a little bit of a less slippery back since its very lightly textured.
Has openings for the mics and what not where the commuter covers some of them
Colors and look is sweet.
Cons:
It doesnt have any internal padding on the sides so I dont know how well it would protect the phone from a hard drop if it landed anywhere besides on its back.
The back is still kind of slippery, but a little less then the commuter feels imo.
So far I like it and will probably only use the commuter at times if I know im going to be doing something that its more prone to getting dropped liked going out to the bars.
Hope this helps anybody thats been kindof iffy on whether or not to buy
PaulQ602 said:
+1. This case is awesome. I've had it for a month. Last I checked, Amazon also had it for a decent price. (Not as cheap as eBay though)
...Sent from my Tab
Click to expand...
Click to collapse
Any paint chipping off? Considering the gray/black one.
Theres a tiny bit of paint chipping where the two pieces meet. It also seems like theres a bit of metal underneath that paint. Maybe its just chrome plastic. This case looks to be of much better quality then previous cases made by body glove
Sent from my HTC Rezound
Had the case since the beginning of January and it's looking fantastic. No drops but lots of sliding around on tables and banging around a car shop.
I bit on this case because of this thread, just got it in.
it is light years beyond the oem htc plastic case from verizon with the red back/htc logo...
this case is the bees knees for me so far... love it.
I have this case also...
Along with a Seidio Active case...
The Body Glove does fit very snug on the ReZound...
Question I have is, has anyone had an issue with the case scratching the gloss edges of the phone?
I had this issue with my Dinc and a Seidio case.
Lego
ya, i've had the body glove case put some small scratches on the 'chrome edge' of the device... nothing i can't forget about, but it's definitely noticeable.
Just dropped it for the first time while walking the dog. Ouch...
Pretty much killed the top edge of the case. Bummer
Sent from my Transformer Prime TF201
I've had mine for a few months now, It's still in descent shape, had a few falls. It fits great, and looks good. I use it in combo w/ the zagg shield.
It did scratch the chrome around the edge of the phone, but nothing to terrible.
overall a great case.
I just purchased this. I've been looking for a decent case. I did like the Body Glove when I had it on my Original Droid, although it was a poor design because of the Droid's slide-out keyboard, but I still liked the feel of it. Looking forward to this. I should get it by the end of this week coming up.
I really like this case. Definitely better than the hard rubber one from Verizon.
Hey all. I purchased the TryIt black leather flip case with the stand about 2 weeks ago off ebay $44.69 shipped. I honestly didn't like it at first but it has grown on me. It takes a while to get used to holding the phone with the case cover flipped back. My only real complaint is the sturdiness of the kick stand. Looking at the pictures on ebay, i thought the kick stand was metal. It actually is a cheap plastic stand that snaps off really easily. A little bit of pressure makes it come off, luckily it snaps back into place. The genuine leather gives it a nice feel. The ID/credit card slots are convenient. However, it can only hold up to 4 cards comfortably. The fitment of the case hugs the note perfectly with all holes aligned. Surprisingly it doesn't add much bulk. Enough rambling...now for the pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I717 using XDA
That's a bummer about the kickstand. How is the call quality with with the case closed and how easy is it to remove from the case itself?
CreekDirt said:
That's a bummer about the kickstand. How is the call quality with with the case closed and how easy is it to remove from the case itself?
Click to expand...
Click to collapse
call quality is fine with the case closed. i was thinking the caller would sound muffled, but they actually sound clear. removing the case seemed quite difficult at first, but after doing it several times, you get used to it. at first it seems like you will break the clip on liner but it actually is really durable.
I'm really digging the look of this case. How much was it?
CreekDirt said:
I'm really digging the look of this case. How much was it?
Click to expand...
Click to collapse
i got it off ebay $44.69 shipped. a lil pricey, but i say the black leather is what makes it worth it for me. ill add this info to the review. thanks for the reminder.
I'm thinking of ordering the non-flip version of this case. Does the top bezel touch the surface of the display at all? It looks like it only touches the sides. I want to add a Glas.t screen protector, but I don't want the case to touch it.
Also, how much size and weight does this add? Would you consider this a slim case (without the flip cover)? Thanks.
Budge said:
I'm thinking of ordering the non-flip version of this case. Does the top bezel touch the surface of the display at all? It looks like it only touches the sides. I want to add a Glas.t screen protector, but I don't want the case to touch it.
Also, how much size and weight does this add? Would you consider this a slim case (without the flip cover)? Thanks.
Click to expand...
Click to collapse
top bezel does not touch the surface. you will be fine if you order the glass screen protector.
it doesnt add much weight at all. i would consider it a slim case if it is the one without the flip cover.
Thanks. Does the bezel all you to place the phone face down without the display touching the table? It looks like the bezel might be slightly raised above the level of the display (not once the glas.t protector is on, though).
Budge said:
Thanks. Does the bezel all you to place the phone face down without the display touching the table? It looks like the bezel might be slightly raised above the level of the display (not once the glas.t protector is on, though).
Click to expand...
Click to collapse
the bezel is slightly raised, but its like half a mm. i still feel like the screen touches the table when on its face. i wouldnt recommend having the face down with this case.
I'm still thinking of getting this case. How is your holding up? Also, have you ever tried the Elago G4 or Rearth Ringke Slim? I'm curious how much thicker this case is over the others.
Budge said:
I'm still thinking of getting this case. How is your holding up? Also, have you ever tried the Elago G4 or Rearth Ringke Slim? I'm curious how much thicker this case is over the others.
Click to expand...
Click to collapse
the case is holding up pretty well. i haven't tried any other cases other than this one so far. i am actually thinking about purchasing the seido active case with the kickstand. i did have my first drop a couple weeks ago. i was in my car with the door open and it slipped out of my jacket pocket. when it hit the ground it actually popped out of the case. luckily it wasnt too high off the ground. there was no damage to the phone since it was in the case when it hit, but when it popped it, it did slide a couple inches. i can confirm that this case is not made for drop protection.
I have the Samsung flip case, using it now, not sure to keep it. It's so unconvinced compare to my non-flips one. What the better way to use it? hard to hold unless fold the flip all the way to the back, take extra time to "open the case" .... Grrrr
just purchased the mugen power extended battery. pm me if you are interested in this case since i dont need it anymore.
Ordered from China - I was thinking about importing more for other devices and selling them on if they were good enough, as there's an absence of silicone cases on the market here.
So, it comes in a rather nice plastic sleeve with Sikai all over it, and a very inspirational slogan: "Design originates from life. Specialization achieves quality." All good so far! I'm more impressed than I expected to be. Except with the slogan. It's not inspirational.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I open up the sleeve. Immediately notice a really acrid rubber smell, even a few feet from the case. It's horrendous. It smells like there's been a friction fire in a condom factory. I've smelled more pleasant things coming out of my cat. You might expect this to be just the new rubber smell, but a rinse off doesn't get rid of it. No, this smell is here to stay. This certainly isn't the food grade material you get on some others. You'd be lucky to live if you ate anything off this.
Not that these things are designed for having lunch off, of course - but there's a trend today away from caustic rubber smells, BPA and parabens, and this doesn't try to follow. I wouldn't want any of the small things in my house chewing on this.
The smell is more bearable after a while. It's probably destroying my nose hairs. Okay, front view.
It looks okay. So some parts of it do take a big nod toward quality. The feel of the case is nice - the textured cover certainly won't be slipping out of your hands, and it's reasonably thick. The logo imprinted inside the case is a nice touch, too - that little extra bit, even though it's basically just a bit of blown rubber, adds to the overall impression of it.
The holes for peripherals, sensors and the cameras are nice, too - there's no spare silicone hanging off the holes, and overall it's really well made.
The back is just as nice. That textured feel is present all the way around. The Sikai logo is nicely imprinted - the detail is good. Overall, having a good feeling about it.
Okay, let's slide in the TF300T...
It goes in easily. Probably slightly too easily - after literally no struggle at all, the pad is in the case. And here's where the problems start.
Although the case fits snugly around the back, with all the holes matching up to the ports and sensors, around the front it's a different story. The front camera holes and sensors don't fit snugly - they're a few mm from the case holes, so that renders the front camera useless. You end up just seeing the ill-fitting case. All around the front of the case, the poor fit is the same:
But the holes fit nicely around the rest of the case: there isn't a mismatched hole, everything fits in and the volume buttons are taken care of nicely. They work very well.
However, leaving it on for a while, the deficiencies become apparent. That smell is back every time you get close to the tablet. Naturally, you may as well forget about using your front camera, too: it fits so poorly that it's entirely obscured by the case unless you hold it down to the glass. And the case starts to pick up the smallest of dust particles - not only that, but they stick to the case like... well, like the bad smell that the case also came with. They're a nightmare to get rid of. You're not cleaning this one in a hurry. And when you do clean it, it's going to get filthy again really quickly.
Alright, this is the black one - and we all know that black things show the dirt more. But the textured cover, while very impressive and grippy, just serves to attract dirt that gets stuck in the textures.
Not a great case - those fundamental flaws are the smell, the way dirt gets lodged in there and the extremely poor fit. "Specialization achieves quality"? It clearly doesn't. I think this is going in the bin - unless I find out a way to shrink it onto the pad, and then spray it with Febreeze every day.
Check this post out. I bought a silicone case off EBay that fits perfectly. Also, no acrid smell either. I have also listed my other purchases for my tablet in this post. The only thing missing is the dock. I just got it the other day from Office Depot. The manager even matched the price Walmart had online. I paid $119 for the dock.
http://androidforums.com/showthread.php?p=5315630
Sent from my Transformer Pad TF300T using Xparent Purple Tapatalk 2
wetbiker7 said:
Check this post out. I bought a silicone case off EBay that fits perfectly. Also, no acrid smell either. I have also listed my other purchases for my tablet in this post. The only thing missing is the dock. I just got it the other day from Office Depot. The manager even matched the price Walmart had online. I paid $119 for the dock.
http://androidforums.com/showthread.php?p=5315630
Sent from my Transformer Pad TF300T using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Interesting. I was looking at a folding case instead. Something that's very similar to the first one - does the tablet fit pretty snugly?
Either that or a revolving one. They're just bulky, though. Kinda defeats the point of a thin and light tablet.
dontsurf said:
Interesting. I was looking at a folding case instead. Something that's very similar to the first one - does the tablet fit pretty snugly?
Either that or a revolving one. They're just bulky, though. Kinda defeats the point of a thin and light tablet.
Click to expand...
Click to collapse
Oh yes, It fits the tab perfectly and I'm actually very impressed with it. Now that I've gone and bought a dock, I won't be using it as much as I would like.
I just bought a Poetic leather case for the dock and keyboard. According to the details and the reviews, it's all real leather and not the PU leather a lot of the cases are made of. I'll have it the first or second week of January and post a review for it.
Here's a link for it.
http://www.amazon.com/gp/product/B007ZE26CO/ref=oh_details_o00_s00_i00
Silikon Case TF300t
I guys
i bought this silikon case for the tf300 t
http://www.amazon.de/Skque-Silikon-...FLII/ref=sr_1_1?ie=UTF8&qid=1357057904&sr=8-1
Have also the same problem as User in post 1