I use MS Voice Command to dial a number but after one use it locks up and says "deviec not recognized" until I do a phone reset.
has anyone else experinced this and have a fix. Thanks
I had excactly same problem with the parrot 3300 eventually found solution by using the application JetBTHFExt-PPC-1.11 from jetware www.jetware.com i think load it restart problem solved hope it works for you.
Did you have to make any registry changes?
I now get no hangup but nothing happens when I press the aprrot button to access Voice Command.
thanks
Check your button's settings to make sure it's still assigned to that button or any other. If not, you should be able to change it.
There is a tick box in the jetware software under advanced options to enable VC as the default once you have ticked the box you need to restart again to make the change other wise it just uses speed dial good luck Ed
Thanks all, now working perfectly
Related
Hi everybody,
I do really need an extra help with my XDA and Mapopolis GPS kit. I connected everything right, the GPS antenna (Holux 210) works fine bilinking since the sats are linked, but my Mapopolis software regularly mounted on my XDA doesn't want to work. It still keep itself "frozen" searching for on COM1 port and it did not reply to any command on touch screen.
What's wrong???? Anyone can help me? Please...
Thanks so much for your help....
Lele
ITALY
[email protected]
Not sure if this will fix your problem, but I had a similar situation with mapopolis a while ago.
I'll assume you already have your GPS set up to do NMEA at 4800 baud. Also, this process is described for PPC2002, I haven't been able to try out PPC2003 yet.
Go to the PPC settings window (Start Menu->Settings), and choose the "Connections" tab. Tap "Beam" and ensure that the box for "Recieve all incoming beams" is NOT checked. Click ok.
When this box is checked, it creates some kind of conflict over COM1 which prevents Mapopolis from connecting to the GPS. When I turned this option off, everything started working.
Good luck!
Hi gurus!
I wish to know if there is a reg edit to change something to turn on automatly on incoming call.
I know some soft to do this but don't owrk well with WM5 & WM6.
some of theme BTTools, phoneAlarm-v1.6...
So if there some soft that work ok....
Thanks!!!
PD: Sorry for my english
Hi there,
I had the same problem, at the moment I use CommMgrPro on WM6, but this software is able to do a lot more than just to switch on Bluetooth. The problem so far is when the phone is ringing, it takes a while (2 rings) Bluetooth is switched on, another two rings the headset is connected to take over the call. So I'm not totally satisfied with the solution.
Here you can find the tool:
http://www.commmgrpro.com/
Greetings
Naylos
I'll test
Thanks dude!!!!
davicito13 said:
I'll test
Thanks dude!!!!
Click to expand...
Click to collapse
I do not get your problem. I use Jabra BL headset (two different models) and do not need any additional software to be able to answer the call with BL headset. I can hear beep in my Jabra and can push the button to receive a call. Just simply have paired my Jabra with my X7500.
Hi all, Im noobz
probably what davicito13 ask was how to make the BT automatically switched on ONLY when theres an incoming call and automatically switched off when finshed.
(triying 2save batery i guess)
CSDEVCTRL
CSDEVCTRL has this option. Works perfectly on HTC Touch.
http://forum.xda-developers.com/showthread.php?t=386451
Hi,
I did Mortscript code this "BT on with call" functionality for use with PocketMax.net PhoneAlarm. Penguin has reported that the next version already has that functionality when he releases it.
The script can easily operate independently from PhoneAlarm.
I did post the script over at PocketMax forums, and if anybody ever wants that app, let me know and I will repost it here as well.
If I leave my BT on, even with a extended battery, my phone dies twice as fast.
With PhoneAlarm I could have it turn the BT on or off with power. The real issue for my phone is that PhoneAlarm is the only BT toggler that works.
Anyhow, if you want it let me know.
thanks, Keith
MortScript
Hey Keith,
please post this MortScript-code.
Thanx Ralph
Re: Bluetooth on/off w/power
« Reply #13 on: October 05, 2009, 02:19:26 pm »
--------------------------------------------------------------------------------
Hi,
Here is a script i wrote for PA that automatically turns on the bluetooth on an incoming call.
This can be added to a PA profiles' run application option.
Of course my phone has a window that says "Phone - Incoming...", other phones may have a different window title. If you ignore the phone call that window hides in the background so shutting the bluetooth off automatically is tricky. I did set the script so it turns off bluetooth if you look at "Call History". There may be a better way to know the call has ended. I am not sure the "Phone - Incoming" window closes after you exit the call.
To kill the script, you can also witch to a different profile than "Car=On" or the profile that was active when you ran the script.
From here that leaves the door open to an auto-answer with speakerphone option. Very easy.
If you do add the command line option for BT toggle, I can just turn bt on without switching profiles to Car.
I also updated the Status script to add the BT on Call message.
--------------------------------------------------------------------------------
PaBTonCall.zip (2.73 KB - downloaded 27 times.)
Keep in mind this is an antique. Probly like 8 months old. Ok maybe like 4 months old. seems like a long time in mortscript years.
With this new rom I can now enable conformation when using MS voice command 1.6. Before i would have to disable conformation in order to use bluetooth with MS voice command, this is no longer a problem; can any one else confirm this?
Wow, I so have to check this out.
No lie! ha ha ha it works! saweet!
well, now caller id and messages arent sent through
there is a reg tweak which will let the caller id come through the bt headset,
sorry but not sure where it is.
Notification
I set the notification options to "Announce notifications using bluetooth hands free if available" and it works. When the phone rings I hear the ringing and the announcement through the headset. I did not do any registry changes as I used to do before this ROM. I am using a Jabra 8010.
I'm more excited about the confirmations working on 3.16 than even GPS and EVDO-A. I don't keep my headset in my ear very much, so I haven't even checked to see if notifications work through the headset.
JimSmith94 said:
I'm more excited about the confirmations working on 3.16 than even GPS and EVDO-A. I don't keep my headset in my ear very much, so I haven't even checked to see if notifications work through the headset.
Click to expand...
Click to collapse
I can also confirm that this problem is fixed. I took the plunge with the pre-release ROM and it's been working like a charm. I have not had to modify the registry to get notifications to work, either. I just went to Settings->Voice Command and setup my preferences.
I also have to agree that the Bluetooth fix is more exciting to me than the GPS stuff since I use this feature way more than I use GPS.
where can I get this fix?
HTC TOUCH
VOICE COMMAND 1.6
NO CONFIRMATIONS THOUGH BLUETOOTH
Where can I get this fix?
mtnTOUCH said:
HTC TOUCH
VOICE COMMAND 1.6
NO CONFIRMATIONS THOUGH BLUETOOTH
Where can I get this fix?
Click to expand...
Click to collapse
touch forum? lol. we have a newer radio rom and bt drivers witch fixed the issue, so wait for someone to port them over. Sorry man.
Question: bluetooth definitely seems to be working 100% better (no longer disconnecting randomly, I can shift all sound to it now if I want, etc), but the button on my bluetooth earpiece no longer brings up the voice command prompt. When I run the bluetooth voicecommand proggy thingy it works, but I can't do it from the earpiece.
Am I missing something ridiculous? I've done some searching on the forums, but haven't found anything. ('course, I might just be pathetic and searching)
taxilian said:
Question: bluetooth definitely seems to be working 100% better (no longer disconnecting randomly, I can shift all sound to it now if I want, etc), but the button on my bluetooth earpiece no longer brings up the voice command prompt. When I run the bluetooth voicecommand proggy thingy it works, but I can't do it from the earpiece.
Am I missing something ridiculous? I've done some searching on the forums, but haven't found anything. ('course, I might just be pathetic and searching)
Click to expand...
Click to collapse
Did you assign Voice Command to Button 5? (Start > Settings > Buttons). I have Button 5 set to Voice Command, and Button 5 (Press & Hold) set to Record.
mtnTOUCH said:
HTC TOUCH
VOICE COMMAND 1.6
NO CONFIRMATIONS THOUGH BLUETOOTH
Where can I get this fix?
Click to expand...
Click to collapse
This worked for me on my wizard and Hermes
taxilian said:
Question: bluetooth definitely seems to be working 100% better (no longer disconnecting randomly, I can shift all sound to it now if I want, etc), but the button on my bluetooth earpiece no longer brings up the voice command prompt. When I run the bluetooth voicecommand proggy thingy it works, but I can't do it from the earpiece.
Am I missing something ridiculous? I've done some searching on the forums, but haven't found anything. ('course, I might just be pathetic and searching)
Click to expand...
Click to collapse
i have the same problem. after a hard reset and then installing ONLY voice command, it works PERFECTLY - announcements, confirmations, everything. after a soft reset something gets changed in the registry and it no longer is activated from the headset.
is there a program that can tell you what has been changed in a registry?
its frustrating that is working PERFECTLY and only upon a soft reset does it not work anymore...
ok... still trying to isolate what the problem is.
here are the symptoms. as before, everything works GREAT until i soft reset.
then, rather than the headset triggering the voice command, it opens the dialer app and hangs open. i have to uncheck the object in bluetooth settings, save, then recheck to reset headset.
i am trying some more stuff...
i found a PITA fix. apparently whatever happens after a soft reset messes up the bluetooth files. so i uninstall, soft reset, then reinstall.
sad thing is - i'd rather do this than keep trying to figure out what is causing this conflict...
1.6 Voice Command; announcements not coming over incoming calls
I have a ppc-6800 sprint mogul.
I have WM6 Professional
CE OS 5.2.1238 (Build 17745.0.2.3)
My issue is that when I installed VC 1.6, everything works fine, except I don't get the incoming call or calendar announcements. I have checked the appropriate boxes in the VC options settings to no avail.
I am certainly no xda-developer, and can become easily confused when talking about registry edits and .dll files. If anyone can provide explicit directions on how to fix, I would truly appreciate.
JFA
Hi people,
I just bought myself a Prophet so now I'm putting it through the paces configuring it the way I want it.
Everything is dandy on the new ROM I flashed (Prophet ROM CE OS 5.2.20721) but I am having trouble getting MS Voice Command to activate via Bluetooth.
I did a search in the forums but could not find anything on it, my question is does anyone here use BT with MSVC and can they activate MSVC with their bluetooth? If so, what ROM are you using, and what Radio Version? I'd like to get this to work as it is the most important app for me in a phone.
Thanks
Try read this topic:
http://forum.xda-developers.com/archive/index.php/t-256855.html
Thanks, that trick never worked for me over 5 different devices, but anyway the good news is, for some reason, it suddenly worked.
I currently have Vincent's Speedy Diamond ROM (Build 20273.1.3.3) with radio 2.69. I installed Voice Command 1.6.19209, and it did not work. Then I uninstalled it, reinstalled VC 1.6.19213, still no dice, then I uninstalled that then reinstalled VC 1.6.19209, then it *still* didn't work.
Then I did a soft reset and all of a sudden it works. =_= The world is a mysterious place.
did you check this?
This cab is good for me, but to make it work with the button on your bluetooth headset
you also need to do the following changes in the registry:
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule\"Windows\OEMAGW.dll"
My headset only make the "input speech name" after this change.
regards
Thanks. I prefer MS Voice Command but I'll use that if ever the miracle that happened screws up later. For now it somehow worked so I'll just hope it stays fixed!
Hi guys
could any one please be so kind as to help me with a problem im having.
i have a spv m5000 on orange which i have change the mother board over with a o2 exec mother board running windows mobile 6.1 seems to be working fine no issues however i have tried to pair both my gps units with it but to no avail, i have a Holox BT-541 and a navicore BT-GPS-32354D i have tried both of them and have same problem,
my xda see's them and adds them fine but when i try to connect to one in the xda it says unable to connect or wrong passkey i have used 0000 for holox which thats what it says in the holox pdf but have also tried 1234 but i think this is a com port problem i have tried all com ports some will go in ok but still cant connect to gps i also tried this "go into TomTom and use the NMEA devices with baud rate of 38400" this did not work, before i changed mother board i had these working fine on older tomtom and original spv m5000 mother board so i dont know if this is a win mobile 6.1 problem or not i see quite a few people with same problem but no solution that worked for me any way.
i have seen thred taking about pairing before tomtom installation but not sure that will fix my issue as i think i tried to pair before i installed any way.
has any one any ideas on this any help would be really appreciated this is getting to be a pain in the rear!.
also there is an icon in the system tab "external gps" can any one tell me the correct settings in there ie for program tab and hardware tab what com port and baud rate should be and whether the manage gps auto should be ticked
many Thanks in avance for any help you can give here.
Kind regards
Daz
Ok found solution,
after spending way too much time on this crap! I finally found the issue as I stated I thought
it was a mobile 6.1 issue and I was right, in mobile 6.1 they have added a external GPS shortcut
in system tab it is here the problem exists.
my problem was resolved by the following procedure.
On your XDA go to Start/Settings/Connections click on Bluetooth short then add new device once it has found it
enter passkey 0000 or whatever yours is once it has made the first connection then do the following,
1. Under "device tab" click on your unit and make sure the serial port is "UNCHECKED" disabled then click save.
2. Under "Mode tab" make sure (Turn on blue tooth) and (Make this device visible to other devices) are "CHECKED" enable them.
3. Under "COM ports" select a port, I chose 0 don't think it matters but if so chose another but remember what one you choose.
4. Under "Security tab" Authentication (passkey) required "CHECK" enable it click ok to come out of Bluetooth.
5. Under "System tab" click on "External GPS short cut.
6 Under "Programs tab" select (None) for GPS program port.
7. Under "Hardware tab" select port 0 or same as you gave your Bluetooth com port and issue the "Baud rate" 115200 or lower rate.
8. Under "Access tab" Manage GPS automatically (recommended) "CHECK" enable
9. Finally check your xda is blinking a blue light and turn on your tom-tom software it should now pick it up, all done.
Final note it seems that Microsoft have made one more buggy operating system, no change there then LOL
and as a result you can't seem to use the blue tooth pairing process as intended so this is a working work around
one more thing there is a 2nd bug found and that is when you turn off your GPS unit and try to use your xda you might
find that your last page froze up here you will have to mess around with it i.e. try turning off your tom-tom software first
and then your GPS, Thanks to bill gates for yet another windows operating system that doesn't work as advertised.
Well we had Hendrix king of rock, Marley king of reggae, Elvis king of rock'n'role then there's you bill gates king of crap!
Long live the king!!!!! LOVL
A big thank you goes' out markanthonypr on xda-developers for pointing this out, nice one m8
http://forum.xda-developers.com/archive/index.php/t-476940.html
hope this comes in handy for others "knowledge is the real king give it freely"
regards to all
Muzz