Any recommendations or ones to avoid?
I think I'll need one for when I'm driving.
OR do I actually need one? Do the supplied headphones do a good enough job?
Thanks
Bill
billuk said:
Any recommendations or ones to avoid?
I think I'll need one for when I'm driving.
OR do I actually need one? Do the supplied headphones do a good enough job?
Thanks
Bill
Click to expand...
Click to collapse
I have a Jabra 620BT, it works perfectly with the TyTN, and it has also a small display that shows the number of the caller, so you can keep it in the cas!
may be worth waiting for this
link
daddyo said:
may be worth waiting for this
link
Click to expand...
Click to collapse
Most of thge mobile bluetooth headset are manifactued by jabra anyhow
this is very similar
http://www.jabra.com/JabraCMS/EM/EN/MainMenu/Products/WirelessHeadsets/JabraJX10/JabraJX10
and this is the best
http://www.jabra.com/JabraCMS/EM/EN/MainMenu/Products/WirelessHeadsets/JabraBT800/JabraBT800
if you like earbuds, the hbh-ds970's work perfectly with A2DP.
Switches effortlessy between phone calls and conduits pocketplayer, very good quality sound.
Minor drawback -- have noticed infrequent 1-second hangs, but seems to be related to mailbox access intervals.
cheers
Problem using handsfree
Hello! I am using a Nokia handsfree (from my old phone!) connected to a TyTN. The problem is that it's not handy at all. When using the Nokia 6310i phone I could do the following:
- press the headset button and wait for a BEEP
- say a name and hear the headset repeating that name
- the phone started to call that person
When using the TyTN things changed. If I'm trying to follow the same three steps, I get the following:
- press the headset button (nothing happens and only after a few tries I hear a BEEP on the TyTN, not in the headset)
- I don't know when to say a name if the TyTN is far away from me because I can't hear the BEEP
- when I say that name it looks like the TyTN is not "listening" for what I'm saying in the headset but it uses it's own microphone instead
- when the conversation starts everything works ok
Imagine that all this is quite annoying when driving. Anyone ever had similar problems?
Re: Handsfree problem
Same here Innov. For voice dialing the Sony Ericsson HBH-30 worked as you describe with my Sony Ericsson T39m, except there were 3 beeps before I had to say the name. With the TyTN, after pairing apparently succesfully, the HBH-30 never stops beeping!
So only certain bluetooth headsets are compatible with the TyTN?
:?
I use the Nextlink Bluespoon AX2 - only 10g, sits inside your ear and great quality. Boasts up to 1500 hours standbye too! Pics/review on my website... http://rakh1.homeip.net Cost is just over £25 from mobilefun - not bad considering the original AX was nearly £100!!!
I use the Motorola H700 and have also used the Motorola HS850 both work really well and initiate MS Voice Command reliably for driving.
Software or headset?
Sorry, but I really don't think that the solution to this problem is in the headset that you are using. I believe that what I need is a software for my TyTN with Windows Mobile 5. The fact that the TyTN only starts to use the hands-free's microphone and speaker AFTER the conversation has started (and not before, in order to be able to use the voice dialing) proves that what I need is some piece of software for my PDA.
Another example. If I use my hands-free with another mobile phone it works ok, but the sounds that I hear when it asks me for a name to call are different. Because they come from the mobile phone to the hands-free.
Any ideas of such a software?
Related
before i buy jabra 250 . is it work well with pda2k now after the new rom????
also do you have something better than jabra?
jabra 250
no good 4 a xda2
jabra also confirm this if asked
so which bluetooth headset is best ?
Sony Ericsson Akono HBH-300 ok ?
Mine works faultlessly with my XDAII.
Mine works, but there is no actual handsfree. i.e. you cannot do a last number redial, as with the wired headphones, so I presume it is not legal to use in UK when driving?
When you ring someone there is a second delay then the XDA transfers the call to the headset. When you recieve a call you have to press the answer but on the headset then it is transfered. You don't get it ringing in your ear. Well mine doesn't.:-(
Regards
I get ringing in my ear with mine and no dely when transferring.
I can confirm that only answering and ending calls work. There is no dialing on LNR.
Headset
I have a blue angel ( SX-66) and neither my BT200 or 250 work with it....
The Stack is too old as well so my BT keyboard will not work either !
Stay away from Jabra 250 on these phones. Jabra 200 *might* be ok.
HBH-300, HBH-660, Plantronics M3000, Logitech Freedom are few that work well.
HS820 will work but audio is poor compared to above head sets.
You can patch that SX66 with i-mate patches.
Hard Reset and apply these in this order.
OEM_WWE_124_008.sa.CAB
OEM_Patche_12100401.sa.CAB
http://www.blueridge.net/dereck/bt/PDA2k_Bluetooth_Fix.CAB (same as OEM_WWE_124_008.sa.CAB)
http://forum.xda-developers.com/download.php?id=2306
Here is some commentary from Tech Support. Does this make any sense?
Dear Sir.
Thank you for writing in and for your query. Regarding your issue, I would like to tell you that you should install the Bluetooth patches after upgrading your device in order to fix the device Bluetooth issues. On the other hand, regarding Bluetooth headsets, Sony Ericsson HBH-65, Cellink, Jabra and Motorola headsets work perfectly with i-mate devices. Most of these headsets have been tested by i-mate technical team. There have not been any reported complaints regarding these headsets as they are quite compatible and error free with the i-mate™ devices.
Regarding Plantronics M3000 Bluetooth headset have not been tested yet from i-mate technical team.
On the other hand, make sure that your headset has the following specifications: Bluetooth Ser. Version 1.1 and supports the headset profile.
I brought a jabra 250 and didn't know it had problems with this device 100$ later I reallized that it doesn't work it pairs and I can hear people but if I am more than 2 feet from the phone the audio become muffled.
my coworker has a nokia headset. and the same thing happened.
I am not sure what my bluetooth version is but I I do have the latest roms.
Hi,
I have the Jabra BT200 with the non bluetooth adapter and I get more crackle in my ear that I get out of my bowl of Rice Krispies! And there is no point in using the adapter with it when the headset is bluetooth and is supposed to work with my MDA III. Oh! and for the record... I also have the SX56 and the bluetooth adapter and it didn't work with that device either. When I plugged it in the jack and turn on the set , no sound. Jabra is a decent product. But lets face it, Any company that is going to make anything or install anything Bluetooth need to stick with one set of Bluetooh frequency protocols instead of trying to make it customized to work with just certain devices. Because everybody is not going to stick with the same headset or the same phone and people upgrade all the time and others just stick with what works. In my research I did fine that any of the Plantronics headsets (M2500 best pick) works well. Which I will pick up this weekend. I hope this helps. Cheers everyone.
Shane
using a bt200
I'm using a blue angel (XDA2s) with a Jabra BT200 headset, I have installed the recently released patch from o2 to fix the bluetooth problems, and now I find it works ok, audio is reasonable withing a couple metres, gets a bit flaky further away but I'm never sure if that's the bluetooth or network signal in my house!
It IS slightly annoying that you can't do dialing, not even last number redial from your headset, but mostly if I'm driving I'm not making calls, merely expecting them, so I can answer on my headset OK and talk to the caller. I DO get a short ring tone in my ear (series of short beeps).
I got my headset free with my phone so I'm happy to live with it's limitations til I've finished paying for Xmas, then I might ebay it and buy an officially supported one which I can do LNR with.
I have heard (dont know if anyone can confirm) that the blue angel doesnt support voice dialling via your headset (for any bt headset) as the bluetooth headset doesnt take over the microsoft for all applications on the blueangel.
Jabra FS-258 (Jabra 250 + car charger)
No problems here (crackle) after upgrading to the 3500 stack. Making voice commands isn't the fault of the gadget -- blame the stack on the XDA. Originally bought mine for the SE T68i and it worked perfect. Moving to the SE K700i the call button didn't work anymore. So, this is a software driver implementation problem definitely. The best thing about the Jabra is its linked to all the previous devices and I just have to turn off the bluetooth on one so the connection hops to the other. Seamless integration with the XDA IIs.
My Jabra 250 works perfectly on my the XDA II and my XDA IIs. On the IIs i do get some crackle/static related to the bad stack especially so after the 3500 update but hopefully that will be fixed soon, anyway that is no fault of the headset.
Also on the IIs it is extremely loud and i had to turn it down. I always had it on full on the II.
On both II and IIs there is a ringing in the headset aswell as the devices ringing.
It is a shame that handsfree is not fully supported still in the new IIs.
o2 don't like making it easy to find out about compatability, do they?
There's the list on the my-xda website, but that's not very exhaustive.
Muggins here phoned up customer services trying to find out whether the Logitech stuff worked. After taking me through security, I got another number...
...which was engaged for 20 minutes.
So, eventually I got thru, and was told to phone customer services (on a different number) and ask for data support.
I got through there. "Nick", a helpful chap, then passed me onto tech support.
Tech support insist that the only things that work are the:
SonyEricsson HBH200 and 65, and the Nokia HS 4W, 3W, HD W3 and W2.
I suspect they are talking what is known technically as "balls".
This site seems much more helpful...
Considering purchasing the new Jabra headset but I've noticed that it supports Bluetooth 1.2. Is this a problem and should I stick with the Jabra 250 (works fine)
Hmm, the 250 is the one that's supposed to have problems with audio quality according to BT, so I'm slightly confused!
Buy mail order, and if you don't like it you've got the opportunity to return it under the distance selling act.
Oh, and post the results
Bluetooth sucked until I upgraded to 3500. After that...all was well. I will post the results on the new Jabra when it arrives.
Have u got ur jabra yet? Tell us ur thoughts how it's working with PDA2K.
Thanks.
Hi,
There is a topic at PocketPC Dubai (under "Jabra BT800 and PDA2k") and the experiences of various people over there are not that encouraging. I myself found the statement: "spoke to the technical guys there and they said that Jabra has told them clearly that the BT800's caller ID function will never work with any PPCPE" kinda sad news.
http://pocketpcdubai.infopop.cc/eve/ubb.x?a=tpc&s=553609464&f=611104143&m=202104236
kind regards,
- Avareh ([email protected])
bt800 with XDA2S
hi i have bt 800 paired with XDA2S
END IT WORKS 100% WITH CALLER ID
I CAN SEE THE CALLER PHONE NO PERFECTLY
I read the review, it's pretty expensive. I will have to wait for the price to go down and then buy some months later. With the Earphone mod, I am pretty happy how it is working out.
Hi All
I am succesfully using the bt800 with and XDA2s. The caller ID works fine.
i have the O2 Asian BT fix installed on the XDA until the O2 European Patch is released.
Regards
The Pilgrim
I nearly bought one of these until I read a load of customer reviews saying how bad the sound was and that it wasn't loud enough. In the end I bought the Cardo Scala 500.
Not a good experience. Range of about 2 metres (as long as it's line of sight) before the crackles start. Ok if you are calling someone, but takes 3 seconds or so to realise that youre recieving a call. Displays the callers number, so it conveniently tells you whos call you're about to miss because the pickup button works when it feels like it! (picked up 1 call in 4 today). When it does pick up a call it takes 5-6 seconds before you can hear each other
It's off back to the shop tomorrow. even the O2 Blue I sent back was better than this.....
I have been trying a few different headsets.
I am still using my Cardo Scala 500 which overall seems to work the best.
Best sound quality so far for me is Cardo Scala 500. This is also the loudest headset I have ever tried. On max setting it is actually too loud.
Best reported sound quality for person on other end is Motorola HS810.
Best connection in terms of range, pairing, reacquisition of signal is Scala 500.
Most reliable in terms of controls and function actually working was Southwing NeoVoice USB. The functions like pickup, hang up, transfer to headset, transfer to phone, readial etc ALWAYS worked, but the controls are fiddly cos you have to do everything using the little multifunction wheel.
Southwing was cool cos you could charge it from a USB port.
Motorola HS810 will also do this if you can find the right cables but Motorola don't tell you this.
Scala is very cool because it comes with some nice accessories like a neck lanyard, carry clip and a fitting that allows you to attach it to your glasses instead of hooking it over your ear.
In the next few days I should be getting my hands on a SonyErricson HBH-660.
Hi, Just a quickie about the Cardo Scala 500 does this stop the echoing you sometimes get with some headsets..
Cheers
Ian
I have not experienced any echo on the Scala so far.
There's some static from time to time but you have to expect that with any bluetooth audio.
Generally the sound is crisp and clear at my end and I have had the occasional complaint from other people that I sound like I'm in a tunnel or "tinny".
On some occasions there is just a lot of interference from something (it's always hard to tell what) which makes it hard for the other person to hear me, but even if there is static on the headset I never have difficulty hearing them.
As with any of these things "your mileage may vary".
I recommend that you try one by buying it from a website like expansys and treat it like a two week free trial as you can always send things back under the distance selling act as long as you keep them in good condition and retain all packaging.
I have the BT800, and the called ID feature works perfectly. It came with 3 chargers: USB, AC, and DC (car). It also came with a belt pouch. I haven't had any complaints from anyone about sound quality. It also works well when you dial out, and the volume is fine, sometimes even a little too loud. Pairing was easy, and the MDAIII picked it up easily.
Now for the negatives. When my MDAIII is in standby mode, and a call comes in, the headset and caller ID usually won't register until the 2nd or 3rd call or so, about 3 seconds. Once it does, sometimes it has a hard time answering the call when I press the answer button, and you can't hear anything for a second or 2. The static varies from moderate to none, but still audible even with static.
All in all, I would say that it is a decent headset. I am pleased with it. I wish that it was easier in answer mode, but I understand that these things aren't perfect. I got mine on Ebay for US$85.30 after shipping.
Hi All,
Used the BT800 with my IIs and it paired and worked well. CallerID functioned as per advertised. Ringtones and Vibra alert were also interesting. The only thing that I didn't like about it was it's size, so I'm back to using my Jabra BT250/FS258....Jabra hurry up and release the BT500 in Australia would ya?!
I added the new BT800 CAB that came with the new 1.40 ROM. The sound quality is much, much clearer now. However, I have trouble answering an incoming call from the headset. Has anyone had this trouble?
Jabra BT250 & XDA IIs
Hi there, read with interest all your comments on bluetooth performance. Is there actually anyone out there with a descent performance from the Jabra 250 and an XDA IIS. All I get is SERIOUS crackle and very poor comms quality for the other listener. This headset worked fine on my Nokia but I cannot get anything with the XDA IIs! Any thoughts / comments welcome.
"I have trouble answering an incoming call from the headset. Has anyone had this trouble?"
ditto i went to the web site and they said that the TB800 was not be to use with the PDA2K; think i they knew about the 3-10sec. delay problem
Quite a few people seem to be saying that Caller ID "works perfectly".
I have to totally disagree with that. It only shows the number that is calling you, not the name listed in your Contacts. Thats pants!
Remember Xda1 early roms that wouldn't show the name in incoming text messages, only the number? Well for me this is worse as I get far more voice calls than texts.
JD
Hello everyone.
I have BIGGEST problem with answering option of BT 800.
I use it with Qtek 9090.
I wonder if anybody of you have any expirince to solve this problem.
Everything works fine exept answering function.
I spoked with Jabra customer service and they told me that new software update for this BT headset will be evalubale soon. But ... reallly don't know if it really could help. Think that possibly the situation could be in the ROM. Currently I'm using Dangard ROM 1.44.
Hope you can help me.
Regards!
Leo.
i had no problem pairing the two devices, but it does not seem to want to stay paired!
i'll pair it, use it......then i wouldn't use it for an hr or so and when i get a call, the jabra is not connected to the phone!
anyone else having this issue? if so, could you help me out with a solution pls.
tia
I have a BT200 and it works fine... I just have to answer it from the headset not the phone
I have a BT500 and haven't experienced this issue...
I have a bt200 and had some strange noises the first two weeks but since then its worked well.
URPREY said:
I have a BT500 and haven't experienced this issue...
Click to expand...
Click to collapse
have you tried the 500v?
I tried the Jabra BT250v with the 8525, and the functions work well except for volume. Pairing was fine, voice dialing from the headset works, answering calls with the headset works. However, even after setting the volume to maximum in a quiet room, I can barely hear a conversation. I contacted HTC support, and they confirmed that there is no setting or hack that will increase 8525 volume to a BT headset. Also contacted Jabra support, and they said I probably have a bad headset, but since I bought it from a third party on eBay, they will not replace it, even though it was NIB.
I am now using a less expensive Motorola H350, and it works great. Stays paired, answers calls, initiates calls, and terrific volume -- often don't even need the max. I can easily make and receive calls while my 8525 stays in my pocket.
Does anyone have this combination? Do the phone and headset play well together?
Thanks!
lantern20 said:
Does anyone have this combination? Do the phone and headset play well together?
Thanks!
Click to expand...
Click to collapse
I'm also looking for the same answer.... the search for the best business and play BT headset is never-ending.....
Too bad it doesn't seem as if anyone is using this combination.
lantern20 said:
Too bad it doesn't seem as if anyone is using this combination.
Click to expand...
Click to collapse
i guess its a sign to stay away from it LOL.... i guess i'm going to go with the SE ones... even though i might be asking for trouble with all the problems people are having with it..... i figure the all powerful new ROM update will fix alot of the AD2P problems....
I posted my impressions with my TyTN in this thread
http://www.howardforums.com/showpost.php?p=8478137&postcount=11
Possible the headset may have been faulty but I will wait till it is available from a B&M store before trying again. Got it from store.treocentral.com
efjay said:
I posted my impressions with my TyTN in this thread
http://www.howardforums.com/showpost.php?p=8478137&postcount=11
Possible the headset may have been faulty but I will wait till it is available from a B&M store before trying again. Got it from store.treocentral.com
Click to expand...
Click to collapse
The problems you have are all tytn specific and have been experienced by everyone with various different headsets. Please read the A2DP threads and the ms-voice 1.6 threads.
.VIBE said:
The problems you have are all tytn specific and have been experienced by everyone with various different headsets. Please read the A2DP threads and the ms-voice 1.6 threads.
Click to expand...
Click to collapse
I had, and still have no problems with my Nokia HS-12W headset initiating MS VC 1.6 or using A2DP, so clearly the Jabra is at fault. Added to which the headset would not power on after a charge seems to indicate the headset was faulty. Maybe you should read what I actually posted before dispensing advice.
I did read what you said, and it seemed to me that it was all items that i've read before on the other posts. Sorry.
Are you getting a replacement for the Jabra? I'm also interested in the BT8010.
I have been using the BT-8010 without any problems for the past 2 weeks with the Cingular 8525. I can use VC 1.6 to iniate calls and can also use the stereo function with the A2DP fix. Overall, voice quality is excellent though the stereo sound is only OK. Prior to the BT8010, I had the BT8000, but this was way too big and heavy. I selected this model primarily because I can use it to make/receive calls (30 number memory, called ID) without having to remove my phone from my case.
As an added plus, I also use the BT8010 with my computer and can communicate through SKYPE w/o any problems and with excellent voice quality on both ends.
Overall, I am very pleased with this product and would recommend it.
mambomn said:
I have been using the BT-8010 without any problems for the past 2 weeks with the Cingular 8525. I can use VC 1.6 to iniate calls and can also use the stereo function with the A2DP fix. Overall, voice quality is excellent though the stereo sound is only OK. Prior to the BT8010, I had the BT8000, but this was way too big and heavy. I selected this model primarily because I can use it to make/receive calls (30 number memory, called ID) without having to remove my phone from my case.
As an added plus, I also use the BT8010 with my computer and can communicate through SKYPE w/o any problems and with excellent voice quality on both ends.
Overall, I am very pleased with this product and would recommend it.
Click to expand...
Click to collapse
thanks for your feedback! how comfortable is it in your ear? the two ear pieces together make it look a little bulky... how does it look? does it look silly when you're walking on the street? i would also wear this while i'm skiing... is it durable??
The BT8010 is very comfortable to wear and is fairly lightweight. Honestly, I only use the one main piece most of the time (80%) and attach the second smaller piece when making skype calls on my pc/listening to audible. The BT8010 holds fairly steady on the ear when walking around and I feel secure wearing it. With both pieces attached, the BT-8010 still feels comfortable and I sometimes forget that I have it on. Overall, the BT8010 seems very durable, the software can be upgraded, and it comes with a 2yr warranty from Jabra.
From my experience, it's an excellent unit.
mambomn said:
and can also use the stereo function with the A2DP fix.
Click to expand...
Click to collapse
What A2DP fix are you referring to?
I just decided to go with the BT8010 for my 8528 and am having some problems. I am having difficulty initiating calls from the headset, it usually seems to be in music mode. Also, when I sometimes do go to initiate the call, it does initiate voice dial, but does not give the indicator beep for when I should speak. I am using the Cyberon Voice Speed Dial that came with the 8525. Any thoughts or suggestions?
Thanks
Maybe try MS Voice Commander 1.6 ?
I don't think that would work either. Half of the time, my voice dialing would not go through and the connection would not be maintained between the BT8010 and the 8525. Doesn't matter anyway. I got tired of trying to figure it out. I returned it and am going to look for a simple BT earpiece that will connect easily, hopefully stay connected and will allow me to use voicedialing. That is what I mainly need it for. I thought that with the stereo BT it would be good for streaming music, but that didn't work very well. I'm not sure where my problems were coming from, but I think it was a combination of both the BT8010 and my 8525. I would have to give that combination a thumbs down, but that was just my experience.
Its too bad you were having problems.
After 2 days this headset is nothing short of awesome for me. I use WM6 so that may be why it works better but so far I haven't had any problems.
I did a mini review in http://forum.xda-developers.com/showthread.php?t=302202
is it possible for incomng/outgoing calls to use the same bluetooth earpiece with two devices?
if so... what brand should i get?
the two devices are a Blackstone and a Polaris.
Thats a question I would love an answer to. So far the onlt bluetooth device that i've found to do this is the Jabra BT8040. I own one and it works as advertised though with some bugs....
TechAnimal
what kind of bugs?
An example, when you're in a call with one phone and the other rings, it switches to the ringing phone without you answering, which leaves the person you were speaking to wondering what the heck happened.
TechAnimal
I could live with that... I just switch one off =)). Kidding now... it's rather rare when this happends. Just that I can't find the earpiece here... i searched each romanian online store... nothing
istoica said:
is it possible for incoming/outgoing calls to use the same bluetooth earpiece with two devices?
if so... what brand should i get?
the two devices are a Blackstone and a Polaris.
Click to expand...
Click to collapse
Sure, it is called BlueAnt and I have two of them. Both the black color and the red color. Couldn't decide which one to get, so went for both colors.
However, one is sufficient!
The z9i:
http://www.myblueant.com/z9i_headset.htm
Since then they have come out with a newer model called V1, which has voice command build into the bluetooth.
http://www.myblueant.com/v1_voice_control.htm
I paid $75 each for the z9i year ago, they are now less than $40 each .
KOR!
Also, they give you a cable for firmware upgrade. When I bough mine it had v1.0 firmware on them, since then I have upgraded to v1.1
KOR!
istoica said:
I could live with that... I just switch one off =)). Kidding now... it's rather rare when this happends. Just that I can't find the earpiece here... i searched each romanian online store... nothing
Click to expand...
Click to collapse
this is the head set that I use with my Trinity and my Breeze:
http://www.plantronics.com/north_america/en_US/products/mobile/bluetooth-headsets/voyager-815
and you can find it in romania too.
Jabr BT8010 can do it as well. I own one and its a pretty cool peace of toy. Especially to see on the screen of the headset who is calling and that you can even dial with this headset names from your phoneboock is very convinient. I dont want to miss it anymore.
bh10mjr
Thanks a lot! I found it at a good price here which is awsome.
Multumesc!
was my pleasure to help you.
I did buy it from vodafone, on points (was free for me)
you can try in there if you have some points.
SE HBH-DS980 works fine with two devices.
gentillo
too many wires I already ordered the plantronics earpiece. as soon as it arrives i'll let you know how it works.
it arrived
While on vacation, the earpiece arrived.
+ good sound quality
+ easy pairing
+ it pairs to more than two devices
+ accessories (it was shipped with different earbugs and earloops, to fit more customers)
= battery life
- small range: if more than 5 meters (even with direct line of sight) the call could be considered as dropped
- no car charger or USB charger in the package (uses proprietary charging socket)
I'd say it's a 8/10.
bh10mjr said:
this is the head set that I use with my Trinity and my Breeze:
http://www.plantronics.com/north_america/en_US/products/mobile/bluetooth-headsets/voyager-815
and you can find it in romania too.
Click to expand...
Click to collapse
Eh?! What the deuce? I use this headset every day but never knew you can get dual connections on it?
Are you sure you don't mean multiple PAIRING? I haven't seen a headset (other than dodgy $5 nobrand ones) that can't multi-pair, it's pretty much a prerequisite of any bluetooth headsets to even make it to market these days.
But being able to connect to more than 1 host device is the challenge here...eg: listening to music via A2DP on the Blackstone and have my music automatically pause to answer a call coming in a Trinity for example...and vice versa... and if I press the voice command button, which phone does it issue the voice command to... etc..
plantronics voyager 520 with noise canceling
Hi guys, anyone here encountered this issue of a non-stereo headset (mine is an SE HBH PV705) that while playing music/audios, it would cutoff from the headset and play through the ppc-speaker at every 4-5 mins.?? Each time I'll have to press the headset button to resume listening through the headset.
...I've never had this issue with my WM5 ppc with the same headset - I can listen through the headset for hours even w/o any interruptions.
...solved.
For in car use both Nexus and Movon have products that do this - both available from amazon.co.uk or were last time I looked:
http://www.maplin.co.uk/Module.aspx?ModuleNo=227944&C=AffilWin89477&T=41513_
http://www.amazon.co.uk/Movon-MK30-Bluetooth-Hands-Free-Car/dp/B001EKMRVU
Jabra BT 8010 or 8040 do the job well with the glitches already mentioned with simultaneous calls. They have "multipoint technology" that is they poll both the handsets alternately making both think that have an individual headset paired.
I had problem with 8040 due to sweating. Sweat like hell.. and they are NOT water resistant, something you need to keep in mind if u are planning to get one.
2 devices, one headset
Yes, I also have the problem. I got a headset which can connect two mobiles, both are Nokia but I can't do that with one PPC phone and one Nokia?
What wrong or may be some setting on PPC need?
Thanks