I had opera on my installed on my device, worked perfect.
I have now installed opera on my sd card after a hard reset, opera works fine. HOWEVER if i get a text message with a link and click the link I get a failure message.
If i copy and paste the link it works fine.
Anyone seen this behaviour ? Do I need to have opera on my sd card only ?
This is the upgrading forum, you should better post this kind of questions in the TyTN general forum as this is not related to TyTN upgrading.
Created new topic in TyTn
http://forum.xda-developers.com/viewtopic.php?p=346235#346235
Related
As my xda has been working perfectly for the past couple of months I've decided to knacker it for a while and try to load ppc 2003. Trying to use wallaby 5.14 to write ROM from xda to sd card it all goes well untill I put the card into my pc, it seems to think the sd card is blank and needs formatting, back in the xda its the same thing, as if wallaby is formatting it. Now I could just stop mucking around and wait for the proper 2003 version... nope, too simple. Anyone got any clues?
i hope you did not try top open your sd car with the windows explorer ?
you have to use a specific software to read oyur SDcar as explained her on the site in the rom image tool secion.
only XDArit will ba albe to read and writ a rom on the sdcard.
No, I used XDArit, it says card needs formatting.
Bully said:
No, I used XDArit, it says card needs formatting.
Click to expand...
Click to collapse
I went through the same thing try using the older version of XDArit if you haven't already.
There is link for it the below thread:
http://www.xda-developers.com/forum/viewtopic.php?t=1094
Hi,
I upgraded to the 4.01.00 build of 2003. I decided after a bit that I missed the stuff I could add in from the kitchen and also for some reason when I tried to install something to the SD card it would just create a cab file on the card... So I manually started the cab installer from the location and it automatically installed the software into main memory?
I went back to a new brew of yorch's kitchen using 4.00.16 with hopes that this would be resolved...
I dont seem to have any problems accessing the SD card.. the data is transfered over fine... although I set Activesync to use the sd card it only ever copies the cab file and then shows the program not installed.... if I go to the SD card I can see and run the cab file copied over by activesync... but it only copies it to memory
I thought cab files installed relative to your current location (i.e) you run an install from the SD.. it gets installed to the SD.. run it from the main memory and it gets installed to the main memory.. etc.
But I'm totally confused as to why activesync refuses to install anything onto the SD card itself.
Has anyone else recieved this problem? know how to fix it? any ideas?
currently it appears I can only use the SD card for music/files or whatever I want to store rather than install other programs...
cheers for any help,
Ian.
I would uninstall your current version of activesync and install version 3.7.1. If you have 3.7.1, I would do a reinstall. It sounds like the issue isn't your SD card or the ROM that is loaded.
upps, on my XDA I everything works fine ...
I mean installing software to SD card and running the software from SD card, others things are not that smooth .... but the above mentioned is ok
I do use WM2003, version 4.0.21 T-Mobile ROM
regards,
monika
Just thought I'd add how I fixed the problem...
I stopped using this
http://www.iliumsoft.com/site/fg/dockware.htm
everytime I hard reset my device the first thing I'd do was install 3 programs...
Iliumsoft Dockware Pro
Tillanosoft Small Menu Plus
Omega One Battery Pack 2004
On that build (4.01.00) of the ROM Dockware would pretend to install by activesync... but it wouldnt even copy over or anything...
After doing that, the rest of the software would follow straight into main memory whither I asked it to or not.... the exception to this case was a few programs like Resco explorer and a few games that did install to the card.
Everything else just copied the cab files over to the sd card.. and then when you installed the cab files from there, they went into main memory.
So.... I hard reset the device and didnt install DockWare at all.... every piece of software installs fine now without a hitch...
Strange huh?
MOTD: dont use Dockware on later builds of 2k3 heh
hi,
i have a t mobile ppc edition.i have a 512 mb sd card,and when i install programs on my sd card after 2-3 days all the programs are erased and it keeps happening.can anyone help me pls?
there is a problem with sd/mmc and multiple inserts/removals. Its a bug of WM200X and there is no fix for it. I unlock my sd card only when I need to change the data on it. Otherwise my card stays locked. Do a search on this forum for "Multiple SD" and "SD Erase". Good luck!
interestingfellow said:
there is a problem with sd/mmc and multiple inserts/removals. Its a bug of WM200X and there is no fix for it. I unlock my sd card only when I need to change the data on it. Otherwise my card stays locked. Do a search on this forum for "Multiple SD" and "SD Erase". Good luck!
Click to expand...
Click to collapse
SO this bug is only WM2003/WM2003SE, no PPC2002?
KTamas said:
interestingfellow said:
there is a problem with sd/mmc and multiple inserts/removals. Its a bug of WM200X and there is no fix for it. I unlock my sd card only when I need to change the data on it. Otherwise my card stays locked. Do a search on this forum for "Multiple SD" and "SD Erase". Good luck!
Click to expand...
Click to collapse
SO this bug is only WM2003/WM2003SE, no PPC2002?
Click to expand...
Click to collapse
This bug only on wallaby's (XDA 1) running "WM2003 " it doesn't happen on WM2002.
I have an XDA 1 running 2002, and the SD card wipe problem also seem to happen to me.
I have an O2 Rom version 4.01.12 Eng.
According to this page: http://www.kbalertz.com/kb_843287.aspx
the problem might be related when two or more programs try to access the same files, so the data becomes corrupted and apparently being wiped...
Anyone have a solution or a suggestion?
I tried to follow this thread for a fix (Rune quoting spadb): http://forum.xda-developers.com/viewtopic.php?t=7230&highlight=sd+files
I can find in the registry a reference to a SD.DLL, but can't find it under file explorer, even when displaying hidden items.
Maybe one of you other XDA1\Wallaby users can find it in your device?
Tosh said:
I have an XDA 1 running 2002, and the SD card wipe problem also seem to happen to me.
I have an O2 Rom version 4.01.12 Eng.
Click to expand...
Click to collapse
4.01.12 is also WM2003 and not PPC2002
Stefan
oops
Newbies mistake
So anyone have found that DLL in the windows folder?
ramram said:
KTamas said:
interestingfellow said:
there is a problem with sd/mmc and multiple inserts/removals. Its a bug of WM200X and there is no fix for it. I unlock my sd card only when I need to change the data on it. Otherwise my card stays locked. Do a search on this forum for "Multiple SD" and "SD Erase". Good luck!
Click to expand...
Click to collapse
SO this bug is only WM2003/WM2003SE, no PPC2002?
Click to expand...
Click to collapse
This bug only on wallaby's (XDA 1) running "WM2003 " it doesn't happen on WM2002.
Click to expand...
Click to collapse
*whew*
Well, i guess i'll stay with PPC2002 then...
edit: and upgrade my signature
edit2: I had an SD-wipe-out few days ago with wm2003 4.01.12...so after searching on the forums i decided to go back to ppc2002...
Tosh said:
oops
Newbies mistake
So anyone have found that DLL in the windows folder?
Click to expand...
Click to collapse
Not searcherd for it on the device. But in the basic ROM its in there...
Should be located directly in the windows folder. i think you have to enable your device to see all files. Normaly dll's are hidden...
HTH
Stefan
I've enabled my device to see hidden files...
Can you upload and attach that DLL please?
I'd like to try to tweak the registry a bit :wink:
I've enabled my device to see hidden files...
Can you upload and attach that DLL please?
I'd like to try to tweak the registry a bit :wink:
hey guys,
try formatting ur sd card with cnetx flash format .it solved the problem to certain extent.its a share ware.if u like it pls purchase after the trial period.
drpvenugopal said:
hey guys,
try formatting ur sd card with cnetx flash format .it solved the problem to certain extent.its a share ware.if u like it pls purchase after the trial period.
Click to expand...
Click to collapse
Can anyone else confirm this? :roll: i really dont like PPC2002 but i dont want a wipeout again...
I'm afraid I can't confirm that, I tried to format many times as FAT32 or FAT16 and I experience the same problems as before...
Try this patch, it worked with me 100% on my Wallaby device with no SD erasings since more than 3 months 8)
Use any registry program (Resco Explorer 2003 is great) to install the registry keys or enter it manually..
Don't worry, the patch is non-destructive at all !
( you can do a backup before running this patch if you wish :wink: )
i saw stefan has a much longer version of this. does anyone have any experience with either file? BTW should i even do this if i have never had the problem before?
cheers
Similar problem on XDA II
I have noticed a similar disease on my Qtek 2020 (XDAII):
When I run it with an SDCard 512 Mb there is no problem at all, goes perfect, but as soon as I put in a brand new 1 GB SD card it crashes within a day or two. And it is irreparable... I've sent back one card to the supplier, but now on my second try with a new card and after reading in this topic I begin to felle a bit coldsweating... :x
Anyone else who has specific experince of this on XDAII?
Yup. went to use navigator today and found my SD card was nor showing. Tried it in a digicam at work which crashed the cam.
In my card reader here format shows as RAW and am having a help of a job getting it reformatted.
I use the XDA II
I also face similar problem, what i used to do is just take my sd card out and re-insert
and it worked for me
removing and replacing the card has no effect for me.
can anyone help with formatting an SD card (1GB viking) that is "unreadable" in a card reader and in RAW format??
pretty please?!??
Dear all,
I have come across a problem and unable to resolve it. I did upgrade my wizard from WM5 (official ROM) to GM ROM. ROM is working perfectly fine but there was a precaution i read on forum not to place MiniSD card while upgrade and unfortunately i forgot doing that. After flashing my new ROM now whenever i access my card it had some data of about 490MB in it prior upgrading ROM which i am unable to delete, i have tried formatting it with my Wizard (with Pocket Mechanic, Resco File Explorer even with builtin format flash function of ROM) it formats successfully but data that was previously saved on it remains there and i am unable to copy anything on it whenever i copy/delete anything it comes back to its previous state.
Can anybody please guide me how to get rid of this situation, with Pocket Mechanic Scandisk software I was unable to fix the clusters because it end up with an error "FAT tables doesn't match"
Looking forward for your expert opinions.
have you tried formatting it in windows using a memory card reader?
Hi Sythen,
thanks for your response, yes i did but it is unable to format it. Sometime if it does the data remains in the MiniSd card and by DOS it says track - 0 bad disk not usable.
Hello,
FCWs 6.5 Home edition 8325,2gig
Long story involving a 5 year old.
Basically right now I can only fire up in sort of a limp mode; "low on memory" or no "permission". Probably due to scores of "FILE000x.chk" files on the device after using Pocket Mechanic Pro on microSD card.
1) It'll only reliably boots with a battery out/in technique.
2) Its "connected" to desk-top PC but as a "guest" and isn't "synced"
3) I can browse it through ActiveSync on the PC, but can't add, move or delete files due to "low memory" or "permissions" (same on the 8525)
4) A few programs won't run and are not recognized as "valid P-PC" apps, including the front end "home2"
5) Can't flash anything as SSPL ROM flasher gives "ERROR [224]: device not responding".
Started with a corrupt 2 gig microSD, couldn't write to it, ran Pocket Mechanic Pro. that Problem solved, this prob created.
Read all Wikis, searched error 224, reflashed about 15 times, know the ropes.
Any Ideas are greatly appreciated!
Regards, PK
Have you tried flashing the rom from the memory card, its the only thing that i can suggest i don't know much about broken hermes.
Hope this helps and that you find a fix
Thanks for the reply Scott,
That was my next line of attack but I'm not clear yet on exactly how to do it (I'll find out).
My big problem is I can't add (or remove or even move) any files on the device either from File explorer on the phone or through. ActiveSync on the pc (I can look at them though...). I also dont have a card reader writer.
I think a lot of problems would go away if I could delete all the 200+ *.CHK files generated by Pocket mechanic pro. I think that where all my memory went.
I just found a way using delete feature in "RAR" ...6 down 200 odd to go. Antone know how to select multiple files?
Regards, PK
Regards, PK
Now its in solitary
I managed to delete 219, *.chk files from the rom hoping to free up memory. I'ts still isolated, I cant add any files to it (like a ROM or utility) through activeSync. The warning is it "can't find the file or path." of the file. To flash a rom from I still get "error 224," don't recognize the device.
Tried to load the SD card with a rom through my camera, no luck, the camera says "cannot flash".
The OS still works in a limp mode, no phone, half the programs inaccessible and home2 no longer works.
Fun.
PK
Have you tried connecting the card to the computer and reformatting it from there you might then be able to flash another rom
Thanks,
I don't have a card reader. The only thing I do have is a printer that accepts multiple card types and a camera that takes this card. So far I can't right to either.
Ya, theres a thread that tells how to flash from a card. Right now though its just of limits.
Thanks, PK
Edit: just got card reader.
Have SD Card with rom can't boot off it and install.
Hello all interested,
1) So I bought a card reader and as per 2 wikis, reformated my SD card fat32 and a single partition of about 190megs.
2) I copied just the "RUU_signed.nbh" file from my stripped ATT rom RAR file. (The wikis were a little unclear as they were apparently using different roms)
3) I installed this ROM directly from my PC to SD card through the card reader. And put the little SD card into the phone. ( I can only read not write anything though activesync as wiki implies. Problem?)*
4) As per wikis , hard booted with pen while holding power and OK keys.
5) All I get is the 4 striped screen with a IPL and SPL verbiage. NOT the "loading from SD card" as described in the wikis.
Help... anybody, PK
* Does loading the ROM through Active syn? I know it changes format of some files
pk2 said:
Hello all interested,
1) So I bought a card reader and as per 2 wikis, reformated my SD card fat32 and a single partition of about 190megs.
2) I copied just the "RUU_signed.nbh" file from my stripped ATT rom RAR file. (The wikis were a little unclear as they were apparently using different roms)
3) I installed this ROM directly from my PC to SD card through the card reader. And put the little SD card into the phone. ( I can only read not write anything though activesync as wiki implies. Problem?)*
4) As per wikis , hard booted with pen while holding power and OK keys.
5) All I get is the 4 striped screen with a IPL and SPL verbiage. NOT the "loading from SD card" as described in the wikis.
Help... anybody, PK
* Does loading the ROM through Active syn? I know it changes format of some files
Click to expand...
Click to collapse
Did you rename the file RUU_singned.nbh to HERMIMG.NBH?
Thanks alot for the reply,
I think you are the man! I did change the name but changed it to HERMING.NBH not HERMIMG.NBH. It seems to be flashing (slowly) right now.
If this works I owe you a BIG cerveza!
Regards, PK
vijovame said:
Did you rename the file RUU_singned.nbh to HERMIMG.NBH?
Click to expand...
Click to collapse
Vijovame,
You are definitely the man.
I flashed the plain Jane stripped ATT ROM but EVERYTHING WORKS! It syncs, the phone works, camera, etc, etc...Now I'm off to flash something interesting.
Thanks for making me re-read the .nbh name. (I've been trying to fix this about half the time I've owned it...my first smarphone)
All the best!!
PK
its good to hear that youve sorted it, theres a few roms out there at the moment so you may have to look around a bit and flash quite a few of them, the safest way is the card method but it is up to you.
Have fun with your hermes
Scotty,
Ironically I had already blindly flashed just about everything out there without a hitch. I finally settled on one. That's when all 'ell broke loose. Now I've got the stripped ATT on my flash drive ready to install anytime if I have to.
Thanks, PK