This morning I received my new 2Gb miniSD card for my new Wizard.
I copied everything across from my old 1Gb SD card that was in my Blue Angel after formatting the miniSD to FAT32.
When I insert the miniSD into the Wizard the TomTom install screen pops up for a couple of seconds with the rotaing windows square thingy in the middle of the screen, then stops.
The same happens if I click Start in my Storage Card folder, or autorun in the 2577 folder on the storage card.
Anyone any idea why it isn't installing?
Its a legit version of TomTom btw, and runs perfectly on my Blue Angel (even if I put the miniSD into the adapter and insert into the Blue Angel it works fine!).
-FM
Sounds like it may have a missing file or something. I installed mine via miniSD card as well without any problems. Maybe when you reformatted the card something got erased or something...
Does anyone know the max size card this phone will handle? I would really like to use a 4GB mini in it if possible!
Thanks
ITADMIN
DJayRage said:
Sounds like it may have a missing file or something. I installed mine via miniSD card as well without any problems. Maybe when you reformatted the card something got erased or something...
Click to expand...
Click to collapse
Hmm, if there's a file missing how come it works on my Blue Angel no problem?
-FM
you have to run cab files in the 2577... It should work now...
It may be because you already had the app installed on your blue angel (if I read your post correctly).
I don't believe any actual 4GB minisd cards exist. I remember reading about a couple of HoFo people ordering them from Ebay & getting burned.
Installing from the cab files worked...
but a few hours later the Wizard hung up completely and wouldn't boot (stuck on the Windows Mobile screen for hours!), so I ended up doing a hard reset.
After this I downloaded the 5.21 installer from the TomTom website and installed that - job done! That installed perfectly from my PC, and my standard GB mapped no problem.... just got to iron out a couple of other issues (see my other posts re TomTom) and then I'll try to activate my other maps and traffic services on the Wizard...
Cheers,
-FM
I have Qtek 9100 and TomTom 5.0. I had to install manyally the cabs and then copy the voices to the device to make it work. I guess 5.0 just wasn't officially compatible. 5.21 is, so that should work just fine. I also upgraded to 5.21 after manual install 5.0. Both versions are working ok for me.
Related
Hi,
I upgraded to the 4.01.00 build of 2003. I decided after a bit that I missed the stuff I could add in from the kitchen and also for some reason when I tried to install something to the SD card it would just create a cab file on the card... So I manually started the cab installer from the location and it automatically installed the software into main memory?
I went back to a new brew of yorch's kitchen using 4.00.16 with hopes that this would be resolved...
I dont seem to have any problems accessing the SD card.. the data is transfered over fine... although I set Activesync to use the sd card it only ever copies the cab file and then shows the program not installed.... if I go to the SD card I can see and run the cab file copied over by activesync... but it only copies it to memory
I thought cab files installed relative to your current location (i.e) you run an install from the SD.. it gets installed to the SD.. run it from the main memory and it gets installed to the main memory.. etc.
But I'm totally confused as to why activesync refuses to install anything onto the SD card itself.
Has anyone else recieved this problem? know how to fix it? any ideas?
currently it appears I can only use the SD card for music/files or whatever I want to store rather than install other programs...
cheers for any help,
Ian.
I would uninstall your current version of activesync and install version 3.7.1. If you have 3.7.1, I would do a reinstall. It sounds like the issue isn't your SD card or the ROM that is loaded.
upps, on my XDA I everything works fine ...
I mean installing software to SD card and running the software from SD card, others things are not that smooth .... but the above mentioned is ok
I do use WM2003, version 4.0.21 T-Mobile ROM
regards,
monika
Just thought I'd add how I fixed the problem...
I stopped using this
http://www.iliumsoft.com/site/fg/dockware.htm
everytime I hard reset my device the first thing I'd do was install 3 programs...
Iliumsoft Dockware Pro
Tillanosoft Small Menu Plus
Omega One Battery Pack 2004
On that build (4.01.00) of the ROM Dockware would pretend to install by activesync... but it wouldnt even copy over or anything...
After doing that, the rest of the software would follow straight into main memory whither I asked it to or not.... the exception to this case was a few programs like Resco explorer and a few games that did install to the card.
Everything else just copied the cab files over to the sd card.. and then when you installed the cab files from there, they went into main memory.
So.... I hard reset the device and didnt install DockWare at all.... every piece of software installs fine now without a hitch...
Strange huh?
MOTD: dont use Dockware on later builds of 2k3 heh
Hi i recently updated the roms through O2 site everything is fine just i cant seem to install programs ie tomtom or any other cab files???!! can anyone help me. All it does is shows the installation screen with the spinning redblueyellowgreen box and thats it. Im confused why its not doing anything.
Kidd
Rom Ver 2.21.4.1 WWE
Rom Date 3/9/06
Radio Version 02.07.10
Protocol Ver 413.1.03
ExtRom Ver 2.21.4.101
The ROM is screwed up..
try reflashing..
its the memory card. Just brought it from ebay 4gb unbranded. I used a old 512mb card and its fine with that. Its when you activate programs on the card it stops and starts. I already formated the card with windows fat32 that didnt work and the panasonic formatting program. It did work for abit but not anymore. Please help
kidd78 said:
its the memory card. Just brought it from ebay 4gb unbranded. I used a old 512mb card and its fine with that. Its when you activate programs on the card it stops and starts. I already formated the card with windows fat32 that didnt work and the panasonic formatting program. It did work for abit but not anymore. Please help
Click to expand...
Click to collapse
Not sure, but you can try research on the highest capacity a Wizard can take. And, take note of possible scam on high cap unbranded memory cards. E.g. try copying full 4GB contents into the card, just to make sure it is now a scam card.
ok copied up to 3.88 gb of mp3s so its pretty much a 4gb. I stuck the mini sd into a old pda Acer N30 (adapted) and it seems to work fine. Seems like the card is the problem as i have no problems using my old 512mb mini sd. Apparently its a samsung card. Im really stumped.
Hi all,
I installed iGo 8 on my charmer, for some reason the installation did not work, but I managed to just start the program from my sd card.
It is relly cool and I like it a lot, but all of a sudden it does not work anymore.
When I start it it loads everything up to "starting" and then I get the following fatal error message:
Fatal Error occured in main thread
Address: 0x00282b34
Exeption: 0xc0000005
Does anybody have a solution for that problem.
The only thing I can imagine that caused the problem: I tried some patches to read sdhc cards on my charmer, but it did not work so I deinstalled the patches...
Does anybody have some advice for me?
Thanks,
Jared
How do you install iGO? Is it an original copy on SD card? If so, I think they sell it on SDHC cards, which Charmer does not support so far.
What do you mean by: "but all of a sudden it does not work anymore"? Did it work, and then one day it stopped?
yes it did work perfectly at first
well I installed a "copy" on my normal sd card.
And appart from the installation part it just worked perfekt.
But from one day to another I got that error...
I tried to copy all files again, same result...
Any ideas?
I'm running iGo8 on ridingshark's WM6 without any problems. However, I did *not* try to patch the OS for SDHC support.
Hardreset might help...
Only Hard Reset helped
I could not find a solution to fix the problem, so therefore made a backup then a Hardreset, installed iGo - it worked instantly - and put back on my data.
Now everything works fine again!
I guess the SDHC patch messed up the whole thing.
Too bad there isn't a way to use SDHC cards with the charmer
Hello,
FCWs 6.5 Home edition 8325,2gig
Long story involving a 5 year old.
Basically right now I can only fire up in sort of a limp mode; "low on memory" or no "permission". Probably due to scores of "FILE000x.chk" files on the device after using Pocket Mechanic Pro on microSD card.
1) It'll only reliably boots with a battery out/in technique.
2) Its "connected" to desk-top PC but as a "guest" and isn't "synced"
3) I can browse it through ActiveSync on the PC, but can't add, move or delete files due to "low memory" or "permissions" (same on the 8525)
4) A few programs won't run and are not recognized as "valid P-PC" apps, including the front end "home2"
5) Can't flash anything as SSPL ROM flasher gives "ERROR [224]: device not responding".
Started with a corrupt 2 gig microSD, couldn't write to it, ran Pocket Mechanic Pro. that Problem solved, this prob created.
Read all Wikis, searched error 224, reflashed about 15 times, know the ropes.
Any Ideas are greatly appreciated!
Regards, PK
Have you tried flashing the rom from the memory card, its the only thing that i can suggest i don't know much about broken hermes.
Hope this helps and that you find a fix
Thanks for the reply Scott,
That was my next line of attack but I'm not clear yet on exactly how to do it (I'll find out).
My big problem is I can't add (or remove or even move) any files on the device either from File explorer on the phone or through. ActiveSync on the pc (I can look at them though...). I also dont have a card reader writer.
I think a lot of problems would go away if I could delete all the 200+ *.CHK files generated by Pocket mechanic pro. I think that where all my memory went.
I just found a way using delete feature in "RAR" ...6 down 200 odd to go. Antone know how to select multiple files?
Regards, PK
Regards, PK
Now its in solitary
I managed to delete 219, *.chk files from the rom hoping to free up memory. I'ts still isolated, I cant add any files to it (like a ROM or utility) through activeSync. The warning is it "can't find the file or path." of the file. To flash a rom from I still get "error 224," don't recognize the device.
Tried to load the SD card with a rom through my camera, no luck, the camera says "cannot flash".
The OS still works in a limp mode, no phone, half the programs inaccessible and home2 no longer works.
Fun.
PK
Have you tried connecting the card to the computer and reformatting it from there you might then be able to flash another rom
Thanks,
I don't have a card reader. The only thing I do have is a printer that accepts multiple card types and a camera that takes this card. So far I can't right to either.
Ya, theres a thread that tells how to flash from a card. Right now though its just of limits.
Thanks, PK
Edit: just got card reader.
Have SD Card with rom can't boot off it and install.
Hello all interested,
1) So I bought a card reader and as per 2 wikis, reformated my SD card fat32 and a single partition of about 190megs.
2) I copied just the "RUU_signed.nbh" file from my stripped ATT rom RAR file. (The wikis were a little unclear as they were apparently using different roms)
3) I installed this ROM directly from my PC to SD card through the card reader. And put the little SD card into the phone. ( I can only read not write anything though activesync as wiki implies. Problem?)*
4) As per wikis , hard booted with pen while holding power and OK keys.
5) All I get is the 4 striped screen with a IPL and SPL verbiage. NOT the "loading from SD card" as described in the wikis.
Help... anybody, PK
* Does loading the ROM through Active syn? I know it changes format of some files
pk2 said:
Hello all interested,
1) So I bought a card reader and as per 2 wikis, reformated my SD card fat32 and a single partition of about 190megs.
2) I copied just the "RUU_signed.nbh" file from my stripped ATT rom RAR file. (The wikis were a little unclear as they were apparently using different roms)
3) I installed this ROM directly from my PC to SD card through the card reader. And put the little SD card into the phone. ( I can only read not write anything though activesync as wiki implies. Problem?)*
4) As per wikis , hard booted with pen while holding power and OK keys.
5) All I get is the 4 striped screen with a IPL and SPL verbiage. NOT the "loading from SD card" as described in the wikis.
Help... anybody, PK
* Does loading the ROM through Active syn? I know it changes format of some files
Click to expand...
Click to collapse
Did you rename the file RUU_singned.nbh to HERMIMG.NBH?
Thanks alot for the reply,
I think you are the man! I did change the name but changed it to HERMING.NBH not HERMIMG.NBH. It seems to be flashing (slowly) right now.
If this works I owe you a BIG cerveza!
Regards, PK
vijovame said:
Did you rename the file RUU_singned.nbh to HERMIMG.NBH?
Click to expand...
Click to collapse
Vijovame,
You are definitely the man.
I flashed the plain Jane stripped ATT ROM but EVERYTHING WORKS! It syncs, the phone works, camera, etc, etc...Now I'm off to flash something interesting.
Thanks for making me re-read the .nbh name. (I've been trying to fix this about half the time I've owned it...my first smarphone)
All the best!!
PK
its good to hear that youve sorted it, theres a few roms out there at the moment so you may have to look around a bit and flash quite a few of them, the safest way is the card method but it is up to you.
Have fun with your hermes
Scotty,
Ironically I had already blindly flashed just about everything out there without a hitch. I finally settled on one. That's when all 'ell broke loose. Now I've got the stripped ATT on my flash drive ready to install anytime if I have to.
Thanks, PK
I have two 8GB Sandisk MicroSD card killed by my HD2 (i think so). Anybody faces the same prob? The cards are totally dead now after using it in my HD2 for a few days...
No such experience.
Good to know the Bland and model.
You mean brand?
Try to format it on your pc...
I had the same Isue.. could not format it on xp pc only on windows 7 pc..
mos of the time if you let you put it in your card reader and its recognized.. you just have to let it scan for errors and let it fix them..
Sometimes my cardreader fails to detecet my card. I don't think this is related to my HD2, atleast I don't hope so.
Not had it...yet...on my sandisk 8GB MicroSD. This is the one straight out of a Nokia 5800. The 2GB one which cam with my HD2 went tits up after I tried to import a playlist from WMP onto it. Seems I'm not alone with this issue either...
For the first time I can report a problem with my HTC HD2.
I also seem to have a problem with my 8Gb Scandisk card. It seems either my telephone or my laptop screwed the card up.
I have standard stock last rom available in Holland manilla 2.5 Rom 1.66. No special things installed.
The card works almost 100% except when I go to the tap music. Then hell breaks loose. The phone looks for the music files. But cannot find them and then suddenly the phone cannot recognize the card anymore? I have to restart the phone before it can recognize the card again. This only happens when I go to Music.
But the damage is done anyway. Cause when I insert card in laptop or computer. I can see the files but according to the computer there empty (which is not the case). I cannot copy or cut while in card is inserted in the computer.
I accepted this problem cause I have a good working TomTom on it which someone else installed for me. If I format the card I cannot put it back.
Try to format your card, I did this from my laptop (if it can reorganize it) and NOT chose FAST. Becouse if there is a problem with the card it will simply skip it. This is also a golden rule when you install new OS on a old or well used laptop.
Copy the tomtom folders to a folder on your PC before formatting, then copy back...done
I have a 8GB Sandisk card, I've had it on 3 plones now, using it for about 3 years, still works like a charm.
To the OP, maybe you got fake ones, Sandisk is the most counterfeit memory card brand, if you got them on ebay or so and not in a respectable street shop they might be fakes, for which that kind of failures are typical.
melkenglas said:
For the first time I can report a problem with my HTC HD2.
I also seem to have a problem with my 8Gb Scandisk card. It seems either my telephone or my laptop screwed the card up.
I have standard stock last rom available in Holland manilla 2.5 Rom 1.66. No special things installed.
The card works almost 100% except when I go to the tap music. Then hell breaks loose. The phone looks for the music files. But cannot find them and then suddenly the phone cannot recognize the card anymore? I have to restart the phone before it can recognize the card again. This only happens when I go to Music.
But the damage is done anyway. Cause when I insert card in laptop or computer. I can see the files but according to the computer there empty (which is not the case). I cannot copy or cut while in card is inserted in the computer.
I accepted this problem cause I have a good working TomTom on it which someone else installed for me. If I format the card I cannot put it back.
Click to expand...
Click to collapse
I have this problem, and I went back to HTC. I got a new phone replacement and everything is fine thereafter. =)
I had a problem with 3 different Kingston 8GB cards.
Statred working fine, but after writing more then 2GB to them, they suddenly died.
I tried all of them in the phone and in a card reader, and they acted the same way.
As a final test - I used a SanDisk card, and it works just fine from the time I got it.
So - maybe, you just have defective cards ?
Did you try formatting the cards in the phone and not in the PC ?
I have the same problem. If i put the files on my sd card from my pc there seem to be no problem. After I check these files on my phone, they are damaged or the folder is empty. So.. anyone has suggestions what to do?
Same experience here.
8Gb was working fine the first two days (the card that was included with my HD2)
Then, for no reason got a pop-up (invalid card type, do you want to format?)
At forst I said "no" and tried with my computer... None of the 6 software I used could save my card. Was definatly dead.
Put a second one in (1Gb, just to make sure), it's been a week, and I already get errors when I write. It's like the micro SD is on read only (though ther's no switch to set it back to "write mode")
One of the many (many many many) bugs of my HD2
i had the same problem. the 8gb SanDisk microsd card that originally comes with my htc hd 2 is now useless. lost a lot of pics, cab & songs. it can't even be read by card reader on my laptop. is this some kind of bug?? now im using another 8gb card & hope it wont happen again. im glad though that im not the only one having the problem
And i thought i was the only one. My 8GB only lasted for 1 day before it went died. Had to get a replacement from Service Center. The staff seem to handle it in a very fast manner (guess i am not the only one to get the SD card replaced recently!!)
My guess is i did a hard reset on the phone with the SD card in it. Anyone else did the same thing?
My card has been corrupted twice no the HD2 leading to:
1) Very poor performance
2) Very warm phone
3) Very fast draining battery
I believe it was due to the power saving features enabled to do with the microsd as someone else mentioned on this forum.
its a manufactures defect. something should be done. lots of users are getting this problem now,including me
maybe i know the answer..
sorry for my bad english..
I've the same problem. But searching from all forums, finally i get the answer. just find n download EASEUS Data Recovery Wizard Proffessional 4.3.6 (for 5 MB). Insert the mmc in card reader, use this software to recovery all the missing file (choose Complete Recovery Option). After recovery process done, use software LLFTool (for 600kb, just doing some browsing at google) to Low Level Format the mmc (this LLFTool can recognize the mmc). After all done, Windows can recognize again the mmc at windows explorer. Just right click and choose quick format (format FAT32). Done, you can use the mmc like the new one
bimo_nugroho said:
sorry for my bad english..
I've the same problem. But searching from all forums, finally i get the answer. just find n download EASEUS Data Recovery Wizard Proffessional 4.3.6 (for 5 MB). Insert the mmc in card reader, use this software to recovery all the missing file (choose Complete Recovery Option). After recovery process done, use software LLFTool (for 600kb, just doing some browsing at google) to Low Level Format the mmc (this LLFTool can recognize the mmc). After all done, Windows can recognize again the mmc at windows explorer. Just right click and choose quick format (format FAT32). Done, you can use the mmc like the new one
Click to expand...
Click to collapse
thanks for your help. i tried your solution but it doesn't work. neither the EASEUS Data Recovery Wizard Professional nor LLFTool detect the memory card. i think there's nothing to be done for the card. just hope htc will sort that out
I have also recently had an issue with my 8gb Sandisk Micro SD card.
It has been working fine for a while now, then yesterday when I went to pick up my phone, I noticed my S2U2 unlock screen was black instead of having my usual wallpaper there. My HD2 had just suddenly decided it can't recognise the card anymore and tells me I need to format it for it to be readable.
I pressed 'no' and tried to read the card on several computers as I wanted to transfer all data off before formatting it, but it would not read on any of them, nor would it work in my old N95.
I don't understand why this has happened, it has been working fine no probs, had about 3gb left on it still and have not recently installed anything on it - very annoyed as I have lost lots of recent photos of my 6month old boy which I cant get back now.
Have had to order a new card and hope this doesn't happen again, but not a happy bunny