Guys, to make it easy for everyone, i place this shortcuts for all of u...
this is a ARAB version ROM, But have been converted to ENGLISH...
u can use it on both ATOM & EXEC...
just extract the file after u D/L
ATOM - if u r using this ROM on ATOM, it will be stated
CE IMAGE VERSION : 7210621
RADIO IMGAE VERSION : 060711_MN2ARC_RS00011
EXEC - (I'm sorry... i dun have one... so i'm not sure... but this is actually for EXEC... it should be stated
CE IMAGE VERSION : 9140629
RADIO IMGAE VERSION : 060711_MN2ARC_RS00011
enjoy... do let me know how do u think about this ROM... i find it not too bad...
(http://www.iartis.net/store/Xda-Atom-Exec-ENG-20060915.zip)
Do you get the screen flicker if battery is removed or runs dry?
homer285 said:
Do you get the screen flicker if battery is removed or runs dry?
Click to expand...
Click to collapse
Yes it flikers, I have used it as is three weeks ago, the stupid phone wont start, tried to start it without removing the battery, no avail; removed battery and I put back, color were gone, had to restore the original april rom again.
One more thing, check out the system info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it still shows JULY Rom.
but settings r diff... and for the removing of the battery, i can... i can remove...
i dunno why some ppl cannot... once remove got problem... but i did not face that problem...
lon3lzsoulz said:
but settings r diff... and for the removing of the battery, i can... i can remove...
i dunno why some ppl cannot... once remove got problem... but i did not face that problem...
Click to expand...
Click to collapse
I wish that was the case wit me the ROM looked awsom
taiseer999 said:
I wish that was the case wit me the ROM looked awsom
Click to expand...
Click to collapse
My Atom's motherboard was replaced two months ago in O2 lab in Singapore. What are the chances that the Atom Exec's ROM will work properly for me ?
yanivw said:
My Atom's motherboard was replaced two months ago in O2 lab in Singapore. What are the chances that the Atom Exec's ROM will work properly for me ?
Click to expand...
Click to collapse
There is no way to predicte, and no rule of thumb, you have to try it, if it works; display does not flicker, remove the battery and run, if display remains OK, you are lucky.
taiseer999 said:
There is no way to predicte, and no rule of thumb, you have to try it, if it works; display does not flicker, remove the battery and run, if display remains OK, you are lucky.
Click to expand...
Click to collapse
Is it possible to reinstall the Atom 426 ROM in case of mulfunctioning of the Atom Exec ROM ?
yanivw said:
Is it possible to reinstall the Atom 426 ROM in case of mulfunctioning of the Atom Exec ROM ?
Click to expand...
Click to collapse
yes, use the temp method prior to the upgrade,
A way to do it if you still want to proceed the update .
1) Run atom 0426 rom update program, after the DSUU program extracted the files, don't click "next", go to windows/temp folder, copy those files extracted, except "diskimage_Ver.nb0" and "ExtendedRom.img", then save them somewhere else.
2) Run exec rom update program, after the DSUU program extract the files, don't click "next," go to windows/temp folder, overwrite with the files you just saved, this will leave only the diskimage_Ver.nb0 & ExtendedRom.img files as of the july exec rom, others become atom rom files, including an older bootloader which allows you to flash back other roms.
3) Flash.
Click to expand...
Click to collapse
why ican go on to flash
teeseer i do what you say but when i clink nekt the say country id errorr why? and what must i do later
the sites is slow, can anyone upload to ftp please..
Related
Moved to http://forum.xda-developers.com/showthread.php?p=1513275
What The F no one tried your ROM?
Fricking idiots.
Have you made any progress with new cooks?
Just trying to encourage the felow portugese.
The link is not working?
Hi there,
Because of the inactivity of the file, it was automatically deleted from SendSpace... anyway, I did try to integrate some of the applications of the touch to WM5, but many of them don't work out-of-box. There are some fixes to that (which I intend to put on a ROM I'm cooking), for the home plugin for example.
I'm working on the last AKU 3.3 from T-Mobile official ROM, so it will be clean, touch driver enabled (just the scrolling with fingers). The cube and home plugin are kinda useless to me...
erm, i didn/t see that post earlier, tell me, how can i cook wm5 custom rom?
i made very customised, optimised wm06(23 mb of custom apps, 34 mb mem free etc..), now - i am thinking about wm05 treated same way..i am wondering about possibilities of making same thing with wm05...
what can i use to cook? molski's method only?
I used Core kitchen It works with WM5 ROM's too
can you re up!
rustylorcin said:
can you re up!
Click to expand...
Click to collapse
Just wait a few days... I'll improve the ROM, then release it!
dferreira said:
I used Core kitchen It works with WM5 ROM's too
Click to expand...
Click to collapse
hahaha, really? that's GREAT
Thanks a lot for that info!
Preview:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Uploading finished work, as we speak
Comments and what can I do
Go and get it
i realized, that is not wm06.
you surely did a good job.
(i can't test, because i do not like touch soft, but it is impressive indeed).
Noonski said:
What The F no one tried your ROM?
Fricking idiots.
Have you made any progress with new cooks?
Just trying to encourage the felow portugese.
Click to expand...
Click to collapse
indeed, strange :S
nothin said:
i realized, that is not wm06.
you surely did a good job.
(i can't test, because i do not like touch soft, but it is impressive indeed).
indeed, strange :S
Click to expand...
Click to collapse
Thanks
The only Touch Soft that is in there is the home plugin, commanager and the dialpad. You can remove them (I made the instalation via Extended Rom ) if you like.
The touch driver (the new driver for the touchpanel so that you can scroll with fingers, instead of using stylus), is embeded with the OS
I have to remove PCM Keyboard from the ROM cause it's time limited. Although we can remove it and update it, tene the keyboard dev has requested to remove it from the ROM. As requested, I'll remove it, then if you wish, you can install it in your device.
dferreira said:
Download here: ...still, a lot of work to be done...
Click to expand...
Click to collapse
Looks good!
I'd like to try the touch i/f as my Stylus doesnt stay in the Wizard anymore. What is the reported OS version? I have to hack it because I want to use Blackberry Connect.
Does it show the current network youre on, instead of a carrierlogo, in the dialer (by default the TMO AKU3.3 ROM doesnt, this should be in)
Does it have smartdial? (should be in)
What pagepool does it have? (I'd like 8MB)
Where is the link to the download (P2P would do too)?
WM5 SE
Hello can you give me the link ,i will install this on mine G4 CID unlock
Please!
wippi
Here it is
http://www.sendspace.com/file/h1c8ad
1-I'd like to try the touch i/f as my Stylus doesnt stay in the Wizard anymore.
2-What is the reported OS version? I have to hack it because I want to use Blackberry Connect.
3-Does it show the current network youre on, instead of a carrierlogo, in the dialer (by default the TMO AKU3.3 ROM doesnt, this should be in)
4-Does it have smartdial? (should be in)
5-What pagepool does it have? (I'd like 8MB)
6-Where is the link to the download (P2P would do too)?
Click to expand...
Click to collapse
1- The touch driver is working
2- OS 5.1.195 build 14955.2.3.0 -> it's based on AKU 2.3 Wizard's Love ROM, I intend to upgrade this ROM to AKU 3.3, which comes with a lot of new features and fixes.
3- Yes, its without the carrier logo, only the name.
4- Yes and no. For some reason, it only works until you softreset your phone... my guess is this issue will not be present on updated AKU.
5- Pagepool is 6MB, but on later version I'll make it 12MB so that the ROM flys!
6- Its on the first post and here: http://www.sendspace.com/file/h1c8ad
Please read the first post for instructions
You can always dump the one i just made and work from there. integrating all these applications will be easy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you can find instructions here
cheers,
Jiggs
@jiggs
what is much better? bigger or smaller MB???
-=[serialzs]=-
Dear Jiggs,
is it possible if you able to make .cab file so everybody able to install it without making mistakes with Hex Editor, Probably 4 MB and 2 MB version.
It just a tought.. thanks for everything!
regards,
sliders
jiggs said:
you can find instructions here
cheers,
Jiggs
Click to expand...
Click to collapse
Hi jiggs
I use you provided the hex editor try to make it to 8M but I can't found the string .Would u mind upload the image file to your original post and let us select !For a newbie just like me it is very dangerous to change by myself. Cause I try to change my O2 mini to be a brick before
Jiggs, can you please include this in: New XDA Atom ROM WM5 AKU3.3 (For Evaluation Only).
Thanks.
serialzs said:
@jiggs
what is much better? bigger or smaller MB???
-=[serialzs]=-
Click to expand...
Click to collapse
After 8mb, there is no noticeable performance upgrade. After experimenting, 4mb is most suitable. 2mb creates a lag.
Yup! will include options.
mightyox said:
Jiggs, can you please include this in: New XDA Atom ROM WM5 AKU3.3 (For Evaluation Only).
Thanks.
Click to expand...
Click to collapse
sliders7 said:
Dear Jiggs,
is it possible if you able to make .cab file so everybody able to install it without making mistakes with Hex Editor, Probably 4 MB and 2 MB version.
It just a tought.. thanks for everything!
regards,
sliders
Click to expand...
Click to collapse
sorry... it's not cab installable. We have to reflash in order to set it to a new pagepool. Don't worry, I'll include it in our next release...
Jiggs
ericj said:
Hi jiggs
I use you provided the hex editor try to make it to 8M but I can't found the string .Would u mind upload the image file to your original post and let us select !For a newbie just like me it is very dangerous to change by myself. Cause I try to change my O2 mini to be a brick before
Click to expand...
Click to collapse
Just wait for the next ROM release...
cheers,
Jiggs
jiggs said:
Just wait for the next ROM release...
cheers,
Jiggs
Click to expand...
Click to collapse
Thanks jiggs we are most appreciate your help and hope you can successful to port the WM6 to all atom/atom exe user
Cheers
Aw, man. And I just flashed by phone. >_>
Too bad we can't put the WM2003 RAM slider back in there, eh? <_<
Ultimate Chicken said:
Aw, man. And I just flashed by phone. >_>
Too bad we can't put the WM2003 RAM slider back in there, eh? <_<
Click to expand...
Click to collapse
WM2005 has a different architecture compared to wm2003. Besides, it's persistent storage we're enjoying in wm5 which wm2k3 don't have. So, the slider will definitely not work.
Cheers,
Jiggs
I don't know what the pagepool is! Can you explain for me?
how can i do the atom life wm6 rom?
how can i do the atom life wm6 rom?
dbase.o2 said:
how can i do the atom life wm6 rom?
Click to expand...
Click to collapse
The Atom Life has a different format. First of all, it uses MSFLASH50 format and it's XIP is compressed as SRPX. Although, I have the tools to break it down, I am not sure if it will reconstruct it correctly. If you want, you can try...
On the other hand, the ATOM Life has a bigger program memory... you can only gain 4mb max for so much trouble... of course, still your choice.
Here are the steps in accomplishing this task:
1. 'Cut' the first 12 bytes of FLASH.DIO (atom life ROM)
2. Save it as FLASH.BKP
3. Process the file using Breakdown.bat batch file
4. During pause... DO NOT CLOSE THE BATCH FILE -> edit flash.dio.part1.xip with hex editor
5. You can now search the hex values and edit it
6. Save your changes and proceed with the batch file
7. Restore the FLASH.BKP by inserting it back to FLASH.DIO
8. Flash your new FLASH.DIO
Your Hex Editor must be capable of editing large files. If it doesn't work, just flash back the original ROM. As I've said, I haven't tested the reconstruction part of the tool because I don't have Atom Life to start with. USE AT YOUR OWN RISK!
Cheers,
Jiggs
Let me introduce it,.
This is my first ROM that i name it "O2 Atom WM6 Premium", This ROM based on jiggs latest ROM, with a litlle modifications and a little registry tweak,.
so, this ROM is for XDA ATOM or XDA ATOM PURE ONLY,.
Actually, i want to make a clean WM6 ROM for XDA Atom, just like if you buy a new XDA Atom with WM6 ROM, with no third party software,. and here she is,.
Here is some of her look,.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known bug:
- a2dp problem, as it discussed HERE
- O2 Plus, today items doesn't work
Interested? Download it then,.
8MB PagePool : Rapidshare
Here is the upgrade procedure,.
1. Enter BootLoader menu (by pressing "Camera button + Reset button")
2. Connect XDA ATOM to PC using USB cable
3. Run "DSUU.exe" (located in "O2 Atom WM6 Premium" folder)
4. Perform Hard Reset when it finished
Well, this is not a perfect ROM, but this ROM could make you call anyone or send message to anyone,.
and If you found that this ROM is buggy, report / share it,.
Finally, if you dont like it, then remove it,.
Special Thanks:
+ meschle --- Who inspired me to cook a ROM,.
+ jiggs ------- Thanks buddy for the rom and for replying my message,.
+ my ATOM -- That have been flashed for 50 times or more, (well, my ATOM should be strong enough now,. )
Attention:
This is NOT an OFFICIAL ROM, You can not expect support from O2 by bringing in your device with this ROM.
By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device
and that I can not be held liable for damage brought about by the usage of this ROM.
(as jiggs said,. ;p )
nice....i presume this is only for Atom and not for Exec.
Is it based on Jiggs latest rom? wm6 Aku 07a?
Good Job! mate..
So sad every one is making for ATom , except charteux for exec
Sorry my comment is off topic , but i feel good now when I wrote it
gkavin10 said:
nice....i presume this is only for Atom and not for Exec.
Click to expand...
Click to collapse
Yep,. Thread Updated,. Sorry, forgot to mention,.
possum4 said:
Is it based on Jiggs latest rom? wm6 Aku 07a?
Click to expand...
Click to collapse
that right possum,.
This ROM based on jiggs latest ROM,.
ghostrecon2050 said:
So sad every one is making for ATom , except charteux for exec
Sorry my comment is off topic , but i feel good now when I wrote it
Click to expand...
Click to collapse
I am not trying for ATOM only but i am trying to build for ATOM EXEC too exactly,.
But i dont have any device to try, is only my friend have one of it, so i couldnt test the ROM,.
another mirror pls
can not downld
bro...got any preview on this ??
shuren said:
bro...got any preview on this ??
Click to expand...
Click to collapse
There are pics attached,.
may be your internet explorer browser mate,.
Garmin said:
There are pics attached,.
may be your internet explorer browser mate,.
Click to expand...
Click to collapse
Even I can't see your pics here in the first post. But I can see pics from other posts. So definitely nothing wrong with my browser
i wanna backup my official rom so that i can use cooked rom from here.how??
Mine currently using wm6 official rom but have problem with the official one.thx
I want to know this too. Need to Back up my MWg wm6 rom from the device
someone point us into the right direction. THX
What's the version of the official ROM you're using?
aa125690 said:
What's the version of the official ROM you're using?
Click to expand...
Click to collapse
i'm using wwe_rc2140907b2!!thx
o2 xda atom exec said:
i'm using wwe_rc2140907b2!!thx
Click to expand...
Click to collapse
Do you wanna save the data? Or the ROM only? If it is the first one, use Spb Backup or other backup software to backup the data. If you wanna get the ROM for backup flashing, go to here to get the latest O2 Atom Life ROM.
aa125690 said:
Do you wanna save the data? Or the ROM only? If it is the first one, use Spb Backup or other backup software to backup the data. If you wanna get the ROM for backup flashing, go to here to get the latest O2 Atom Life ROM.
Click to expand...
Click to collapse
i have the rom downloaded from mwg and is the same rite??yup for the rom only.Will i able to revert back after flashing pdaviet rom in case of emergency??
o2 xda atom exec said:
i have the rom downloaded from mwg and is the same rite??yup for the rom only.Will i able to revert back after flashing pdaviet rom in case of emergency??
Click to expand...
Click to collapse
They might be the same, but now the MWg official home site does not provide the O2 Atom Life ROM, as http://www.myxda.com(also supported by MWg) does.
You will be able to revert back, but you have to flash your device back by AL1.DIO modified from MWg official ROM's flash.dio, not to flash by the *.exe file.
aa125690 said:
They might be the same, but now the MWg official home site does not provide the O2 Atom Life ROM, as http://www.myxda.com(also supported by MWg) does.
You will be able to revert back, but you have to flash your device back by AL1.DIO modified from MWg official ROM's flash.dio, not to flash by the *.exe file.
Click to expand...
Click to collapse
ok!!thanks.If i have problem can i refer to you??(i mean help)..lol..
Anyway you have help me alot!!thanks
You're welcome. If you have any other problems, you can PM me. I can solve the junior problems.
aa125690 said:
You're welcome. If you have any other problems, you can PM me. I can solve the junior problems.
Click to expand...
Click to collapse
lol..have problem!!lol has pm you.
i can't flash the rom by pdaviet!!i have format my 2gb mini sd and copied the AL1.dio files.After i have press(record(hold)+reset),it comes out in bootloader only and then nothing happen.
It just stated 1 till 5("something" like boot from os or something like that) and lastly it stated sd card detected.
nothing happen after that.
i do anything wrong??
dude
o2 xda atom exec said:
i can't flash the rom by pdaviet!!i have format my 2gb mini sd and copied the AL1.dio files.After i have press(record(hold)+reset),it comes out in bootloader only and then nothing happen.
It just stated 1 till 5("something" like boot from os or something like that) and lastly it stated sd card detected.
nothing happen after that.
i do anything wrong??
Click to expand...
Click to collapse
make sure yr sd card is empty ...only ali. file shud be ter ...
if possible use 512md card
ten try
Is it possible to update O2 Atom Life to MWG Atom Life ROM? Sorry if It has been asked before but i've been away for some time....
Lann_78 said:
Is it possible to update O2 Atom Life to MWG Atom Life ROM? Sorry if It has been asked before but i've been away for some time....
Click to expand...
Click to collapse
It is possible 'cause I'm using O2 Xda Atom Life but the ROM I'm using is the official MWg Atom Life's one.
razzyan said:
make sure yr sd card is empty ...only ali. file shud be ter ...
if possible use 512md card
ten try
Click to expand...
Click to collapse
yup mini sd with "pendrive" brand can't support and i use "nokia" brand and it works!!anyway thanks!!
ROM Atom LIFE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-WHICH ONE IS LATEST ?
IS UP OR DOWN ?
(MY CURRENT USER )-DOWNLOAD DROM SEEO2.COM
DEVICE CE IMAGE VERSION :09140711
DEVICE EXTENDED IMAGE VERSION :09170711
DEVICE RADIO IMAGE VERSION :070905.1
(THIS I DOWNLOAD FROM INTERNET )
DEVICE CE IMAGE VERSION :05150711
DEVICE EXTENDED IMAGE VERSION :05150711
DEVICE RADIO IMAGE VERSION :070424.2
COULD ANYONE HELP ME ?!
can i flash my O2 Atom Life with the ROM provided by MWG Atom Life? thanks
see the post #14.He use before
http://rapidshare.com/files/194915053/SubDisplayDll.dll.html
1)install SdkCerts.cab
2)Simply copy the file of Subdisplaydll.dll in the folder of Windows on qtek 8500 farther in Resko Explorer find this file through a search, further press properties and put marks on Read - only, Hidden, System
3) Reset device
Zakr said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Simply copy the file of Subdisplaydll.dll in the folder of Windows on qtek 8500 farther in Resko Explorer find this file through a search, further press properties and put marks on Read - only, Hidden, System
http://4pda.ru/forum/dl/post/174685/SubDisplayDll.dll
Click to expand...
Click to collapse
Hi friend
A link to russian forum with some unknown characters & finally everybody must register at forum !!
Do you have a valid link for download ?
Yes, http://rapidshare.com/files/192400269/SubDisplayDll.dll.html
Thanxxxxxxxxx ....
Possibly today yet will do a clock
I copied the file and set the attributes but external display stays black ...
and i haven't backup of old file
strange... already two men said me about it.... regarding your problem: simply udali this dll, and the old will return... what version of sewing do you have?
For whom did begin to work?
Thanks, the dll has returned! My mobile is qutek 8500 with wm6.1 standard from erofich. But... Instead of the htc logo,why not put a naked woman?
picture it is possible any to do)))
Hi friend
can you write a analog clock ( like this ) plug-in for our homescreen ?
slavix said:
Thanks, the dll has returned!
Click to expand...
Click to collapse
My external screen is blank, how did you make it work? I set the attributes as instructed but I can't seem to get it to work...
slavix said:
Instead of the htc logo,why not put a naked woman?
Click to expand...
Click to collapse
Nice one... While your at it why not make it animated.
it is necessary to make attempt
Pampooh said:
My external screen is blank, how did you make it work? I set the attributes as instructed but I can't seem to get it to work...
Nice one... While your at it why not make it animated.
Click to expand...
Click to collapse
Simple delete the subdislpaydll.dll file and the old return (i think because ot is read only memory), but the zark clock didnn't work form me.. i don't know why
Thanks slavix for the reply, but I already reflashed the phone (Good thing I had a backup)...
Hey ceramic, were you able to make it work, if so, how?
***To those who are planning to download, I advise you to wait for somebody to confirm that it works, a working instruction on how to make it work would not hurt either...
Pampooh said:
Hey ceramic, were you able to make it work, if so, how?
***To those who are planning to download, I advise you to wait for somebody to confirm that it works, a working instruction on how to make it work would not hurt either...
Click to expand...
Click to collapse
Hi Pampooh .
No , I can't do that . but you can use from " Retro Clock " :
Download link :
PHP:
http://www.mediafire.com/?sharekey=3f170ab2c540aa9061d4646c62b381cbe04e75f6e8ebb871
how can i change the pic ??
and no, i haven't download it yet. i'll download it after i know how to change the pic.
Friends, I noticed the jamb, now again began to be scratched with dlkami, now will lay out a working version
http://rapidshare.com/files/194915053/SubDisplayDll.dll.html
1)install SdkCerts.cab
2)Simply copy the file of Subdisplaydll.dll in the folder of Windows on qtek 8500 farther in Resko Explorer find this file through a search, further press properties and put marks on Read - only, Hidden, System
3) Reset device
Unbelievable but it works only digital clock 2, the other remaining original!