Is it possible to plug a USB card reader into the varioII?
I want to travel next week and just take my VarioII and Sony camera
I want to take pics on the sony camera and then transfer them to the VarioII so I can post them on the internet?
The Sony Camera is MS DUO
Any ideas anyone
Cheers
im guessing that this is a no no then?
bummer, really wanted to be able to do this
As far as I know, the tytn miniusb socket is not host capable; this mean that it can only be the slave of a computer
skipjack said:
im guessing that this is a no no then?
bummer, really wanted to be able to do this
Click to expand...
Click to collapse
You really need a camera with mini SD. I have one with a full SD but not mini.
don't think it would work, since the computer and the device both host a female socket, so you usually need a male to male connector. i've never seen anything that hosts a female socket (the usb port that you normally see on your computer)
thanks for the feedback
monkey_knight said:
don't think it would work, since the computer and the device both host a female socket, so you usually need a male to male connector. i've never seen anything that hosts a female socket (the usb port that you normally see on your computer)
Click to expand...
Click to collapse
The later Sharp Zaurus PDAs have a port that can be used as a Host, it has a similar miniUSB socket to the Hermes, and can with an adaptor cable accept any USB device.
giryan said:
The later Sharp Zaurus PDAs have a port that can be used as a Host, it has a similar miniUSB socket to the Hermes, and can with an adaptor cable accept any USB device.
Click to expand...
Click to collapse
Unfortunately I have tried using my Zaurus's miniUSB cable to no avail. So I suppose it must b true, just doesnt have host capabilities... though I wouldnt be devistated if I was wrong
There is a really simple answer to this.
The Hermes uses MicroSD. Some company on eBay does a MicroSD to Memory Stick Pro Duo. I think you can get an adapter for Pro Duo to Memory Stick. So stick the adapters into your camera. And then use the MicroSD in both phone/camera. I use the same solution between my p910i and my Dimage Z2.
Related
Has anyone figured out if its possible to use the ExtUSB (sync) port as a USB host port? I'm guessing the communication lines could be controlled with software, but that you would have to use an externally powered USB hub (or devices that are externally powered) unless the +/- charge lines are 2-way.
techntrek said:
Has anyone figured out if its possible to use the ExtUSB (sync) port as a USB host port? I'm guessing the communication lines could be controlled with software, but that you would have to use an externally powered USB hub (or devices that are externally powered) unless the +/- charge lines are 2-way.
Click to expand...
Click to collapse
I don'ty know the answer, but... what for? The X7500 has the cable to allow USB devices connect to the USB host... so? And for sure you will need a cable to convert mini USB to female regular USB... so is not a matter of money or carring a cable I guess.
Mostly techie curiosity. I figured since someone already figured out how to reroute internet sharing to make a wifi host, someone else must have looked at that normal-looking usb port and thought about making it work like a usb host. I'm a programmer but I don't have time to work on that...
techntrek said:
Mostly techie curiosity. I figured since someone already figured out how to reroute internet sharing to make a wifi host, someone else must have looked at that normal-looking usb port and thought about making it work like a usb host. I'm a programmer but I don't have time to work on that...
Click to expand...
Click to collapse
unfortunatly the chip that does that feature is not capable of that.
if you look at the schematics of a root hub it has 1 main chip that is the hub controller, and slave chips for each of the ports. a device interface has a diffrent type of chip that's intended to be connected to a root hub connection port. thusly no software fix could be made too convert a port intended to be a connection point into a root hub port
mind you the 4-in 1 cabloe is cheap enough and i saw at least 1 site via google that had a usb port only cable for the sepcial connector
so is worth looking at that.
Hey - do you have the details of the company selling this 'usb only' cable?
Thanks for the input. Just curious if it could be done, I hadn't tried to look up the schematics. I second the request for the info on the usb-only cable, that would be perfect since they already gave us a vga cable...
Would this "USB cable" allow me to use a 149GB externally HDD caddy like I managed on my Dell x51v Axim's CF to USB slot, as the 4 in 1 cable isn't cutting it?
Thankz
There are lots of posts related to external HD and X7500... in general most of them (99'99%) don't work properly. In the webpages from HTC said that the 4-in-1 cable only admit mouse, keyboard and pen-drives.
anyone know where i can get a 12-pin str trk usb to normal mini usb adaptor? i want to be able to charge it with my normal mini USB chargers...expansys have it down as discontinued and ebay not being very forthcoming...
Hi,
I got mine from here http://www.hot-wire-telekom.de/
It is a german shop. I don't know if it helps.
My Adapter have 3,5 mm Earphone out and one miniusb to charge.
regards
neneoc
thanks
neneoc said:
Hi,
I got mine from here http://www.hot-wire-telekom.de/
It is a german shop. I don't know if it helps.
My Adapter have 3,5 mm Earphone out and one miniusb to charge.
regards
neneoc
Click to expand...
Click to collapse
they only accept payment via bank xfer,but it's better than nothing. anyone else know any other sellers?
Does anyone have the pinout of the non-standard Startrk USB connector?
any other place to get one besides that german site? somewhere we can purchase online please. thanks
The adaptor looks like just what I need. I almost ordered a couple from the liked site, but it all became too hard. My German is just not that good. I have searched all the usual places but cannot find this adaptor anywhere else. Please, if anyone else knows where ti can be sourced (preferebly with payment via credit card) let us all know.
Mike
i've tried to search all over internet and found nothing. the only ones available are the HTC made Y cable adaptor which is pretty much overpriced and useless because i want a mini usb+3.5mm jack. even just a mini usb adaptor will do (original HTC made mini usb adaptor available, then again, overpriced). where can i find something like that? any idea guys?
yep, i've searched pretty much the whole internet
alexnvidia said:
i've tried to search all over internet and found nothing. the only ones available are the HTC made Y cable adaptor which is pretty much overpriced and useless because i want a mini usb+3.5mm jack. even just a mini usb adaptor will do (original HTC made mini usb adaptor available, then again, overpriced). where can i find something like that? any idea guys?
Click to expand...
Click to collapse
! and there's nothing. grr. if it wasn't such a ballache i'd get a spare standard cable and cut it up to solder on a mini usb socket. pinouts can't be that hard - although i'm not sure where i'd get an inline mini usb socket from.
I've bought this one for 3.5 mm jack...works great:
http://www.netimes.com/shop/stereo-headphone-adapter-for-htc-startrek-platform-p-421.html
I've paid with credit card (click on paypal....don't need a paypal account), received it within a week (all the way to Europe....;-).
headphone only though
...no mini USB charge point. thanks though.
ric
yeah, we need something that has standard mini usb
I found a site on how to DIY usb t0 3.5mm jack for audio
http://www.andrewgrant.org/2007/08/24/making-a-35mm-headphone-adapter-for-the-cingular-3125.html
i did some modify of my own . i use sony ericsson headset instead of the one from electronic store because sony ericsson unit have mic and button to answer call. and SMALLER = LOOK BETTER
just open up the sony ericsson mic unit and there is all the wiring label print on the small little circuit board. just follow the tutorial for the wiring code and solder into it.
work great but no volume control , have to control from the phone
Mini Usb Please
how hard did you look
this was the 4th link on google
http://www.motorazr.com/content/accessories/5-19--3062.htm
lewnetoons said:
this was the 4th link on google
http://www.motorazr.com/content/accessories/5-19--3062.htm
Click to expand...
Click to collapse
is that thing pin to pin compatible with htc strtrk? the name does sound close enough (micro usb)
landwomble said:
anyone know where i can get a 12-pin str trk usb to normal mini usb adaptor? i want to be able to charge it with my normal mini USB chargers...expansys have it down as discontinued and ebay not being very forthcoming...
Click to expand...
Click to collapse
Maybe a little bit complicated...but let me suggest...
Take a Female mini usb from an old device (for example). Connect/sold/attach it to a Female standard usb (not all wires needed). Use startreck usb cable to charge
so close its exact
micro usb is the 3125 adapter type
Is this the same connector?
lewnetoons said:
this was the 4th link on google
http://www.motorazr.com/content/accessories/5-19--3062.htm
Click to expand...
Click to collapse
I thought the Qtek 8500 12 pin connector was unique to that handset. Have you just searched for "micro usb adaptor" or do you know something we don't?
If this would work I'd be very happy but I don't think it will.
Ric
not sure
lewnetoons said:
micro usb is the 3125 adapter type
Click to expand...
Click to collapse
http://www.crunchgear.com/2006/11/14/cingular-3125-star-trek-hands-on/
"A regular micro-USB port would have been better than the proprietary HTC port, but we understand its necessity for the slim shape the phone has"
buy it and try it
quote "A regular micro-USB port would have been better than the proprietary HTC port"
The port on the 3125 is micro usb, the port on say a 8525 or 8125 is Mini usb
I am not saying the adapter will work, only that it is a micro to mini adapter and it should work.
Hello I got a USB gender change: A-Female to A-Female so that i could connect a self powered USB Hub to my Archos.
So far i have connected a self power Hard Disk directly into my Archos 70.
Didn't pick it up.
A mouse in the USB Hub.
Didn't pick it up.
A pen drive directly.
Didn't pick it up.
Is the Archos 70 locked down or does the USB Micro B connector they have on the Archos 70 work different?
I thought USB was a universal connector!
... one thing you have to realize is the device needs drivers to work those devices. you just cannot flip flop the connector and expect everything to work. tipically unless the device has a INPUT port which is a standard usb port not a micro or mini 5 or an old 1.1 usb connector it wont work.
Alot of those hongkong micro a to b converters are rubbish.
The nokia has been reported to work.
You need a USB "HOST" Cable, it contains a chip that puts your devices on "master" mode.
The Nokia and Archos one work, for the others don't expect them to work at all if they do not mention to be USB "HOST" cables !
BTW, the feedback is not very good, seems that it can deliver only 200mA, so if you want to plug an external disk drive, make sure you have a power supply on it before
Also some USB keys need more than 200mA so they won't mount at all :/
I found this: http://www.kjell.com/content/templa...9&path=97000000,119000000,149500000,151500000
Translation: Used by for example mobile phones with USB host (it's own built in USB controller).
Is the USB "HOST" Cable the same as this? http://en.wikipedia.org/wiki/USB_On-The-Go
foh1981 said:
I found this: http://www.kjell.com/content/templa...9&path=97000000,119000000,149500000,151500000
Click to expand...
Click to collapse
That cable doesn't look correct.
[correction - that cable at kjell looks correct for hooking two USB On-The-Go devices together. So if you wanted to hook your Archos to another Archos or to a blackberry.]
Look for a micro usb Nokia n810 host cable. Or "Micro USB Host OTG". They seem widely available in the us on eBay
Usually they have the micro USB male connector and a full size female connector on the other. Be careful because some are mini USB, you want micro USB
Look on the us eBay for a picture.
Here is a pretty good picture also - http://www.dealextreme.com/details.dx/sku.51045 several people have confirmed this one works.
Yeah, the connector is obviously wrong on that one. I was mostly curios about whether this USB HOST cable was the same as an OTG.
That's the only cable of OTG type that I've seen in any retail store in Sweden (although I haven't been looking for it until now), so I was thinking of maybe getting it in the store and then get an adapter for the connector. But since there's a special pinning on these cables (as I understand from the Wikipedia article) maybe that doesn't work?
I'll probably go for the Nokia cable anyway, just to be sure, should be able to find it in a retail store somewhere...
fzelle said:
Alot of those hongkong micro a to b converters are rubbish.
The nokia has been reported to work.
Click to expand...
Click to collapse
the nokia one doesn't work for me
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250770684805#ht_3877wt_798
by Seller info
business2828 ( 5107)
$5 now, I paid $8 (figures)
this works fine on my 32IT. I can use my microSD adapter, camera, powered hard drive, multi-card reader with SD cards and USB mouse. Other people have said they can't get USB host to work at all, even with this cable, but it works for me.
USB mouse works ok.
But it`s not enought power for 3G USB dongles.... Печалька.
Nokia ones works ok
http://www.dealextreme.com/p/genuine-nokia-ca-157-micro-usb-otg-to-usb-data-cable-14cm-length-51045
Not one to relax and enjoy the spoils of war after conquering the Wall/Car charger mystery I have decided to move on to the subject of USB host without the dock. Sorry if I am duplicating other similar threads but starting a new thread helps me through the process of testing. I'm hoping the asus USB host adapter will be out soon so I can gut it like tuna but till then it is back to the rig I used for the charger probing.
Update 10/16/2011
So what we actually now know.
1. USB host mode requires a board found in the USB Host adapter from Asus
2. Some users are having issues with the adapter staying connected. Bad design IMO, too big of a device to be hanging off the tablet connected to thumb drives and other devices.
3. 5V is being supplied to usb devices, I have not personally verified this but will soon.
Some options
1. Build USB Host "Dongle" with connector and USB adapter.
Sounds like people are having disconnection issues, a dongle might be a better solution for that taking the pressure off the connector on the TF and move it down a wire to dongle connector. This will be my first build since it shouldn't be to difficult.
2. Machine a small attachable dock that sits at the bottom of the TF which contains the host adapter, memory cart reader slots and USB ports.
I love this idea but will take time and money I don't have at the moment. BUT drawings are already done and I'm having my machinist put it on his to do list at the bottom. Prototype in 45 days but no promises.
3. Modding a TF to contain the host adapter internally.
This requires you to open up your TF and install the board and a connector. A daunting task for anyone with even good circuit board and fabrication skills. Best person for this job is Bob, but is there space in the case?
Additional Thread and Web resource links
http://forum.xda-developers.com/showthread.php?p=18474358#post18474358
First Mod, Host Adapter dongle.
While building this on I'll looking in to the capability of charging the TF while using the host adapter.
USB adapter shows up tomorrow and I hit the ground running. Pics and updates to come. Stay tuned!
Hey,
Any updates on this? I would love to see a solution to connect USB devices without needing a dock.
Waiting for the official adaptor might take a while: Asus Australia confirmed that the adaptor is not coming any time soon (and maybe never to AUS at all), Asus Germany can't give a specific date.
DevCake said:
Not one to relax and enjoy the spoils of war after conquering the Wall/Car charger mystery I have decided to move on to the subject of USB host without the dock. Sorry if I am duplicating other similar threads but starting a new thread helps me through the process of testing. I'm hoping the asus USB host adapter will be out soon so I can gut it like tuna but till then it is back to the rig I used for the charger probing.
So what do we know
1. Connecting a USB 2.0 female to female coupler using the factor sync/charge cable from the Table to other USB devices does not work.
2. Asus will be releasing an adapter that allows for USB host features and this tells us it can be done.
3. Asus used some of the usb 3.0 pins to show termination from the tablet to start charging at 15V so this method might be in practice for the usb host function.
I've done a little monitoring of data pins on the factory cable but see no difference between when a device is and is not connected. I have a feeling we are dealing with 2 things, 5v power from the tablet to power the usb device and a pin termination to trigger the host function.
~DC
Click to expand...
Click to collapse
you can use USB3.0 female to female coupler
paulpll007 said:
you can use USB3.0 female to female coupler
Click to expand...
Click to collapse
Have you tried with this adaptor? Do es it works?
Anyone with a USB 3.0 female to female adapter yet?
gordec said:
Anyone with a USB 3.0 female to female adapter yet?
Click to expand...
Click to collapse
Following the OP's logic..
I do not believe that a Female to Female USB3 would be enough. I suspect and trying to locate one is a pain that you will need not only a USB3 AF to AF but also a USB3 Powered Hub (or USB 3 Powered Device) as the TF cable does not supply power..
I tried the USB 2 AF to AF path with my powered hub and can confirm it does not work, TF will mount fine on PC via the HUB so it is not a connection problem so I suspect like the OP that we need all the magic pins of a USB3 connection which logically would also mean we all the magic of a USB3 hub (or device) as well..
I cannot find a USB3 AF to Micro AF cable anyplace (They are all male) so even if I can get my hands on a USB3 powered hub (which are also rare) I could not complete this experiment..
I suspect the lack of the OP's postings would also indicate they are having the same trouble as well..
So in summary, I strongly believe we need USB3 Powered Hub + USB 3 Cable from the Hub to the TF Cable
Anyone got those?
Well I done some searching and found these two that should provide all the right specifications for the TF but I am starting to have some significant doubts that this is all worth it considering this is only a theoretical solution based on USB3 pins logic vs just pay the $149 price tag and get the keyboard dock that we know will work..
USB 3.0 Adapter (A Female to Micro B male)
http://www.usbfever.com/index_eproduct_view.php?products_id=1882
ICY BOX 4 Port USB 3.0 Hub
http://www.icybox.com.tw/page/product_accessories/product_accessories-ib-ac610.htm
*sighs*
As I posted in the other usb host thread, the USB adaptor is listed in a German online shop: http://forum.xda-developers.com/showthread.php?t=1103784
I just want to know when that damn Asus USB dongle is releasing. I don't need the keyboard dock. Already have a 13.3 laptop.
the same site has also in stock the sd adapter (nice for my photo machine, avail at 19€ as well), and the minidock (2 usb + stand) at 29€.
The sleeve is avail at 34.90€, the vga cable at 29€, and a travel kit at 39€.
Everithing is said being available in 2-4 days...
Last week was baja 500 prep for my but i'm back and moving forward with testing.
Don't waste your time with the female 3.0 adapter. The tablet is using one of the 40 pins on the proprietary adapter to look for termination from the keyboard dock to activate the USB host function. This is my theory but I still will test all 9 of the 3.0 pins.
The only way I will be able to test all 40 pins on the tablet connector is to either find a bare connector or wait for the asus usb adapter and open it. I'll start lookng for a bare connector next Week
Sent from my Transformer TF101 using XDA Premium App
~DC
So no new solutions for hosting on the TF? No new information about the adapter?
Hello guys,
Does anyone try this:
http://www.aliexpress.com/product-g...on-cable-Micro-SD-card-cable-wholesalers.html
maxmen123 said:
So no new solutions for hosting on the TF? No new information about the adapter?
Click to expand...
Click to collapse
Nothing yet on either. The adapter from Asus has not shown up anywhere and I'm still in testing mode for a DIY solution.
vaystikh said:
Hello guys,
Does anyone try this:
http://www.aliexpress.com/product-g...on-cable-Micro-SD-card-cable-wholesalers.html
Click to expand...
Click to collapse
I don't see a reason why that won't work but my focus is to activate the host function so that USB devices will be recognized and accessible.
DevCake said:
Last week was baja 500 prep for my but i'm back and moving forward with testing.
Don't waste your time with the female 3.0 adapter. The tablet is using one of the 40 pins on the proprietary adapter to look for termination from the keyboard dock to activate the USB host function. This is my theory but I still will test all 9 of the 3.0 pins.
~DC
Click to expand...
Click to collapse
Thanks DevCake looking forward to seeing some more results.. I would not be surprised if your theory is correct.. I not gone down the Female adapter path yet until we can verify exactly why USB Host is not being enabled..
DevCake said:
Nothing yet on either. The adapter from Asus has not shown up anywhere and I'm still in testing mode for a DIY solution.
Click to expand...
Click to collapse
The adapter has shown up in a German online shop (cyberport.de, search for "usb extension kit" or "sd extension kit") and is listed as in Stock. I wrote them an email to get confirmation that they really have it in Stock and shippable. Maybe somebody in Germany can make a teardown and show us the internals!
betaw said:
The adapter has shown up in a German online shop (cyberport.de, search for "usb extension kit" or "sd extension kit") and is listed as in Stock. I wrote them an email to get confirmation that they really have it in Stock and shippable. Maybe somebody in Germany can make a teardown and show us the internals!
Click to expand...
Click to collapse
If you google "1D09-36X" it comes up with other EU sites that carry it. Hopefully it won't be long till we get it in the US.
Does anyone happen to know the type/model/name of the connector is.
Maybe we can find something that is the same pin config and cut it open and splice in a usb 3.0 female cable.
I've spliced many a cable together for similar purposes, just need the connector end.
We as reseller have direct contact with asus. I called today Asus Netherlands about the usb host adapter.
Atm this moment there only 2 accessoires on the market, which are as follow:
- Asus Sleeve
- Asus Dock
The Sales Manager at Asus Netherlands told me that several other people asked for the USB Host adapter also. They said it wont be on the market until 3th quarter of the year (Aug/Sept/Oct).
Asus Taiwain puts these items on the market. Asus Taiwan understands that there is some demand for this USB Adapter.
So, we have to wait until 3th qaurter 2011 or try to fabricate something ourselfs or wait for some crazy chinese which puts something similiar on the market.
Hi together,
ive asked me if it is possible to use an adapter for 1x micro usb (plug) -> 2x micro usb (jack).
Could the phone handle 2 USB devices at the same time?
Maybe then it is possible to use the HDMI output and the USB host parallel?
For example to use an TV as screen and an HDD as the source for a movie.
This would be nice.
Thanks in advance.
macc
When the connector is used for HDMI I doubt it can be used as USB at the same time, I'n sorry.
Maybe in a few months cyanogenmod provides a hack, if there will be an dual adapter soon.
We will see. Thank you.
macc
The hardware needs to allow this if it'd become possible. You need a really smart USB dongle that knows how to split the HDMI output from the USB output.
Sounds a little too difficult to ever happen.
Hmm thats right. I think i still dream xD
But thank you.
Sent from my GT-I9100 using Tapatalk
it is not possible. because as stated on this forum many times before, the type of usb connection is determined by the resistor between pin 4 and 5 of the micro usb connector. the strength can tell the phone, that there is either a charger, a pc connection, car kit, jig, usb otg or mhl connection present.
and i believe, this is an important thing to keep in mind for so many things:
for instance, why the original car kit triggers car mode and generic car charging cables don't or why not just any micro usb male to usb a female will work as a otg cable or why flashing should be done with the original usb cable...
so if you were to buy or build a micro usb hub, since it has no resistor in the very plug that connects to the phone, it cannot be used for anything but charging and quite frankly, i wouldn't connect more than one charger to the phone.
however, if you want to use your phone for presentations or watching movies and still be able to use it, get a bluetooth keyboard and mouse or a bluetooth presenter or do it the other way around and use a usb input device and transfer your media using allshare. everything else is physically impossible, so neither CM nor XDA can do anything about it. the only device that can do what you want is the new motorola. it has a separate micro usb and micro hdmi port and a docking station, so you can use it as a full notebook.
Thats obvious. Thank you.
macc