I'm looking a light and thin case for my 8125 to put it in my jeans front pocket. I was thinking about a aluminum case but have read reports of signal lost with it. So I'm open to sugestions.
Thanks
Diego
I have been using the one from http://www.senacases.com/catalog/i-mate-KJAM-CASES-p-1-c-396.html (no belt clip version) and have been very happy with it.
What about those cheap ($10 shipped) plastic ones from Ebay. I bought one for my MDA, but wasnt thrilled with it. It fit nicely enuf, but made it a little (more) bullky. I didn't notice any signal loss or anything though.
im using an aluminium case but i didnt notice any signal loss ....
Aluminum case
I also use an aluminum case and I didn't see any signal degradation. I use it everyday and even on the move I am still connected to the Internet.
I find this case good for my Wizard. I wear it in the front pocket of my jeans all the time, with the case inside my pocket, and the clip facing out to keep it at the top of my pocket. It's a little tight at 1st, but after about a week the elastic will strech and fit nice.
http://www.compusa.com/products/product_info.asp?pfp=SEARCH&Ntt=fonegear&N=6&Ne=500000&Ntk=All&product_code=340829&Pn=Leather_Pouch_Case_for_Blackberry_8700_and_Motorola_Q
Related
Anyone have any leads on sources of cases to fit the Wizard? The one that comes with the K-Jam look decent of first view, but since I'll probably want something nicer I figured I would get this thread started.
Robert Harrold
Houston, TX (Ordered my K-Jam through MMB... hope to have it next Friday!)
Well, an update on this, I picked up a Targus Small Camera case Model DCCS00 and while it is a bit loose front to back it fits nicely side to side. A bit bulky but functional and It is easy to insert/remove the device. Also it securely attaches to my belt so I don't have to worry about scraping it off on my office chair. It'll do until someone releases a 'made for' case.
Robert Harrold
Houston, TX
any news with more cases to buy for the k-jam??
anyone?
I ordered and got this case for my wizard after it was recommended on another board. The guy said he found it at a mall in NY at a mobile phone accessory cart. I like it a lot. Fits perfect. The belt clip (although it isnt visible) has a built in swivel so you can wear it vertical / horizontal / or on an angle. I wear it at an angle and its so easy to place in pouch and pull out. I can also charge with the wizard in the case becuase it has a small opening in the bottom.
http://www.shopcell.com/cell-phones/cellular-accessories/HANDSPRING%20PALMONE/Treo$650/Leather-Case-Treo-650-600-Vertical-Pouch-Black-Leather/TREO650LP.html
I just ordered an OEM blackberry 71xx slip case belt clip and Tre 6xx slip case from ebay.
http://www.shopblackberry.com/_blac...gory=BlackBerry+7100t&pid=F2222WBW5TARNDHUC9F
I like to concept of slip case rather than attaching something on my belt.
I'll keep everyone posted here...
Review: PDair booktype leather case
I did a review of the PDair booktype leather case here:
http://www.onppc.com/forum/article_read.asp?id=12
Cheers, Sabesh.
I wonder if the flip type PDAir case uses the same technique to keep the k-jam in place.
I prefer the not so bulky cases. using the case that came with Treo 600 atm and it fits perfectly. slightly tight but it fits in my jacket pocket a lot better than any other cases that I've tried.
I have decided to give BB 71xx pouch a try. I had to stretch it a bit in order to get my qtek a nice fitting.
http://natt108.net/qtek/
I am also in a process of streching my treo 600 slip case with a pair of socks and will post some pictures tonight when I get home.
Does anyone have an IPOd 2/3rd Gen slip case? Can you please try and see if it'll fits nicely with your Wizard?
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
For those using the WIZA100 variant of the Wizard...
--
Got this case this AM. It is for the dopod 838 or VPA Compact II. So far so good my only gripe is that the case doesn't allow access to the messaging and ie buttons [when closed] and it is kinda slippery [maybe use it in tandem with a neck strap or handstrap]
--
They have one for the WIZA200 models as well
http://www.pdair.com/scripts/main/viewpda.php?pdaid=194&catid=9
Hi guys
Just received my ali PDair case - ordered Thurs night arrived this morning, outstanding service!! A great case too!!
Simon
I heard something about Aluminium cases and low gsm signal..
Are you having that kind of experience on your ppc ;
I currently have the Htc Wizard/ qtek 9100 and i am looking for a case.
Probably i'll go for the leather one.
no signal problems for me so far been using it for almost a week now... of course signal strength is also determined by your network coverage as well not only your device
Hi
Just checked on the signal stregth, one room in my house has a very weak GSM signal for Vodaphone and when using the PDair case it drops by 1 bar.
Must be shielding
Simon
Plastic screen cover
Does the aluminum case by PDair have a plastic screen cover to protect the screen like the Armor Case by Boxwave (www.boxwave.com)?
yep they have hard plastic screen
PDAir Case
Sabesh mentioned velcro in his review of the PDAir case. Does that mean there is some 'sticky pad attachment' to be done. The case says it closes with magnets, so I can't figure out where the velcro comes in unless it's to secure the handset. if that means sticking something on to the handset then I'm not so keen. i need to be able to get the handset out easily to fit in my car kit.
TIA, Davebo.
Did anybody here buy the holster from the tmobile store that they have that the g1 supposedbly fits in?
its around 24$ i think.
It was closed by sort of 2 clip things.
i'm primarily looking for a horizntal belt holster...
any ideas?
i have the body glove, it is in that price range. love it if thats what your asking
Theres a magnetic one, that fits a sidekick, it's what i use.
Body Glove
I have the Body Glove also and it's great. Perfect for the person (like me) who is rough on phones. And it looks good too.
I purchased the crystal gel case from boxwave It covers the G1 completely and offers excellent protection for when you drop the phone. I also bought the niteize side belt case. It clips on your belt and the elastic allows it to expand enough for the phone with the gel case on it to fit.This case closes with velcro so there are no magnets to create problems.
I got the one from the T-Mobile store last week but it's not the up and down one. But I have to admit was worth the money (even though I didn't end up paying for it love the gf) The one I got sits sideways but very nice and fits the phone well. Was a little snug at first but about 2 days later the phone just slides in to the case very nice.
Chedderknight said:
Theres a magnetic one, that fits a sidekick, it's what i use.
Click to expand...
Click to collapse
I talked to a TMO rep at the store and said no accessories for G1 should have any magnets due to the compass feature. He advised that if you are going to use an aftermarket case, to make sure it doesn't have any magnets. The case TMO sells are magnet free for the G1.
As for the holster, I have it and though it fits the phone snug, be careful as the screen is facing out so make sure you have a screen protector.
I just bought my G1 last 2 weekends ago with a tmobile store belt clip, fits perfectly, sturdy rotating clip for horizontal or vertical placement, gets annoying having to take it out to text or open keyboard but otherwise perfect...24$
the pleather tmo horizontal case with attached clip. it's soft but not screen friendly soft on the inside so the screen protector is a must. great product though.
One warning. If you have a tendency to forget to snap the buttons, make sure you're using a hard or jelly shell to make the phone fit snugly. the basic stretchy straps on the sides are just barely too long to make the phone 100% secure IMHO without it.
i personally like this one.
http://www.fommy.com/view-full-page.asp?divid=T-Mobile&model=T-Mobile+G1&cat=Cases&skuno=82922
you can use it with the screen either facing out for in for screen protection.
I bought this one by Seidio. I had one just like it for my Blackberry 8820 and loved it. I love this one too.
http://www.g1depot.com/seidio-spring-holster/4A24A4902.htm
Buy a bodyglove that has a belt clip for your g1 phone. You won't need to buy a suction cup or dash holder for your g1.
I clip it to my rear view mirror after pushing back the rear view mirror tab. Then I close the tab. Stays in place and very sturdy. It's even easier to see since it is under the rear view mirror and safer too!
I also can use the belt clip to hang the phone off my laptop. I don't clip it, just use the space between the glove and clip to hang it.
Also, the rubbery glove protects your phone if you drop it.
Getting my TP2 tomorrow, but really wondering about this...
Seeing pictures of the leather 'case' that comes with the TP2 elsewhere than in the US, is it the same case without belt clip in the T-Mo US TP2?
If it is, I want to be ready when I pick up my phone to get a belt clip equipped case as well.
Yeah man... the US tp2 comes with a gay looking leather case that has no belt clip. It looks like you have a man purse imo
yeah a man purse that slides into your pocket
You guys weren't lying -- that thing is pathetic. I don't know what the heck HTC was thinking when they packaged that.
The T-Mobile guy was also full of crap when he said they had one with a belt clip. Looks like I'll be doing some shopping online.
Thanks for the heads up on that one!
yes the cases htc give are always junk. i like the bodyguardz skin cases simply because the phone is already kinda thick and it does protect the phone. kinda of a pain to put on but after my 4th attempt throughout the years i think i did my best on the touch pro 2.
nko, does the screen protector part feel rubbery and make the touch screen a little less sensitive? I know it is like that with the Zagg on my friend's iPhone.
Got this hard thick rubberized case at the tmo store. It comes with a snap in/out belt clip if wanted. Seems to fit tp2 very well, and leaves accessible all need openings.
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
i am still using the case my dash came with for my tp2, it fits.
I just bought me a $5 case with belt clip. I just have to cut a hole for the ear jack. I'm not spending $10+ for a case
freakingwilly said:
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
Click to expand...
Click to collapse
Yeah, I think I'm just gonna use the belt clip case that came with my Hermes. It's just a little longer but it fits for now.
Has anyone installed a full body screen protector like the bodyguardz ones? I saw this one on ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370244520409&ssPageName=STRK:MEWAX:IT
But I bought this for the time being: http://cgi.ebay.com/for-HTC-TOUCH-P...ries?hash=item4399b91c94&_trksid=p3286.c0.m14 (from what I've heard, these pop off easily)
This is a very delicate process for me. It's a balance between too bulky and too little protection. I want it to be able to survive it's first dreaded drop without cracking the case. I may just try to use both of them at the same time. When I'm doing physical work, I'll put the rubber case on, and when I'm at the desk, just have it out with the clear protector. I just wonder if you can clip on the rubber housing over the clear protector. The perfect thing for me would be to just have a rubber skin that slides over the whole body of the phone because I don't slide the keyboard out much anyway. That way it could be protected when I'm on the move and I can easily take it off when not.
I also bought one of those generic belt clip holders for $5: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310161485996&ssPageName=STRK:MEWAX:IT I had one before and their alright. The loops on the back will secure the phone to you if you're moving around but the clip may sag overtime though. I know I'll be replacing it eventually. The HTC OEM cases are much better, but no loops. There's never a perfect solution.
BTW: Does anyone know if the rubber case from the Touch HD will fit?
^^Just ordered one of those this afternoon. Looks similar to one I had before but can't beat $5 and then about $.50 in cashback haha
Just ordered the Krusell flip case and then got the belt clip to go with it.
If you have any questions about these items then feel free to ask away and I'll tell you as much as I can as soon as it arrives.
Case (Tried to add link but not allowed to yet so copy and past the below into ebay and you'll find them)
KRUSELL MULTIDAPT LEATHER SWIVELKIT SWIVEL KIT 45 45MM BELT CLIP FOR CASE ORBIT
Clip
KRUSELL MULTIDAPT LEATHER SWIVELKIT SWIVEL KIT 45 45MM BELT CLIP FOR CASE ORBIT
Recieved my Krusell case the other day and its excellent in almost every way. The build quality is fantastic an even has that luxurious leather smell to it. Very strong and sturdy/well made case.
Flip cover folds downwards and can be slid off as well. I thought I wouldn't use the detachment feature but I use it all the time if I'm handling the phone a lot. You could even use the case completely without the flip cover and it would give you better protection than an Imak case (which I had first off).
It also has the option of a belt clip - which can be removed and Krusell has a lot of useful and different styled attachments. It comes with a alegator type belt clip that connects to the phone by a round plastic button attached to the case and this clip is a non swivel model - great for normal sized belts (thin/narrow).
I wear a combat style belt for work so I ordered the 45mm belt clip which slides onto the belt and can not come off without taking the belt off. The clip is a swivel clip and it clips in and holds super well.
Protects the phone very very well - there are holes etc but its made in such a way that its very hard for surfaces to come in contact with the phone at all. If you dropped the phone in this case it would be very well protected.
The cover looks as though it would probably outlive the phone.
The inside of the case is a soft suede leather which means that any dust or dirt getting in between the phone and the case is not going to act like sandpaper as in the hard cases - ie no scratching.
The only thing I noticed after a couple of days use is the the case loosened up slightly and the phone would move approx 1-2 mm out towards the top of the case making grabbing/sliding down the blind hard to access. I solved this by some double sided tape inside the case. I peeled off one side of the tape and stuck it to the inside of the case then slid the phone in and then gently pulled the case away from the phone and pulled the other side of the tape off with some tweezers and then pushed the case together - now the phone doesnt slide anywhere and is securely stuck inside the case and all the button/mic/camera holes line up perfectly.
Highly recommended and worth considering even if your thinking about an Imak style case because you can remove the clip button and the flip face and you have a similar but better case all round - the only drawback is possibly the price but compared to the price and capabilities of this phone I didnt think it too bad, especially if you work in moderate to extreme conditions.
What do you mean the flip part can be left off? Pics?
It slides off from where it attaches on the back of the case. I'll get some pic's at some point.
Photo's
SCHUMI_4EVER said:
What do you mean the flip part can be left off? Pics?
Click to expand...
Click to collapse
View pic's.....
more pic's
Oh wow cool. I didn't know it could do that. Looks like it leaves the top right corner exposed though.
SCHUMI_4EVER said:
Oh wow cool. I didn't know it could do that. Looks like it leaves the top right corner exposed though.
Click to expand...
Click to collapse
I spose it does leave it a little "exposed" but this is so you can use the front facing camera and light sensors etc and even so its only a couple of mm and the leather on top of it is quite thick so to get something to touch that part of the phone I either have to aim the object at it or hold the phone at a 45degree angle to rub the plastic on the table. But then again with the flap on its covered by the clip strap.
http://www.ebay.com.au/itm/KRUSELL-..._MobilePhonesCasesPouches&hash=item2a102e5e80 <- this is the case yeah?
electricbluejase said:
http://www.ebay.com.au/itm/KRUSELL-..._MobilePhonesCasesPouches&hash=item2a102e5e80 <- this is the case yeah?
Click to expand...
Click to collapse
Yip thats the one.
First Impressions:
The case comes in two parts. There's the jacket part that has a front flap with a leather texture, and the hard plastic part that can detach from the jacket. The front flap does not have a magnet, it simply just folds over the front of the phone, so there's no problem with interference.
The detachable plastic case feels like any regular plastic case. There's a small lip on the front so if you place your phone face down on a flat surface your screen won't scratch. The back of the case provides little camera protection as it sits flush with the lens.
However, once you put the jacket part on, it adds a little bit of thickness allowing the lens to sit in a small pocket.
The jacket part of the case has a thinner plastic base that bends slightly, but does not feel overly flimsy. The flap is attached by a stitching on the back of the case and seems to be well constructed. Along with the flap, the inside of the plastic case is covered by a suede type of felt which protects the two plastic cases from rubbing against each other. The flap has three card slots built into it. However, if you have cards in all three slots, I found that it added significant overall thickness when the case is closed.
The cutouts on the case are perfect! I didn't have any trouble accessing any of the buttons or pulling out the S-Pen.
My main problem with this case is the price. It cost my fiancee about $43 with tax from the AT&T store. Coming from a $10 Spigen Bounce case, it's quite a price difference.
Overall, I give this case an 8.5/10.
The price of this case is a bit hard to swallow, but otherwise, it's a great case so far.
I'll update this review once i've had more time to use it. Thanks for reading!
Thanks for the review. That looks like just the type of case I'm looking for. Does it remove from the "jacket" pretty easily? I imagine there needs to be a balance between not being cumbersome to remove, but sturdy enough to stay put. I have been concerned about getting a wallet type case since I dock my phone when I drive. This looks like just the solution. Would like to see if I can save a few bucks, though. That is more than I have spent on my last 10 cases combined (I'm cheap).
The removal of the case from the jacket requires a little effort, but it's not terribly hard to take apart. It's got a good balance to it, it's not just going to come apart while in your pocket or while you're using it.
is there any auto wake/sleep lock function with the case?
No there's not, the jacket detaches easily but the hard plastic does not
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
I had this case for a smaller phone and could never get it to stand up like a kickstand like you have in one of your pictures. How sturdy is everything when you have it propped up like that?
I got one also and im digging it so far especially the taking it apart and still having a case on it. Playing Real Racing with the flap attached is just a pain sometimes. Although I used my company discount thru VZW and got mine for 25 and some change. I get a 35% discount on accessories from VZW.
Also how flush is the camera without the outer shell? Does it touch the table when it is only in the plastic shell?
webdave said:
Also how flush is the camera without the outer shell? Does it touch the table when it is only in the plastic shell?
Click to expand...
Click to collapse
Yeah it touches the table when its out of the outer shell