Hi Guys,
I have an (for me) interesting issue:
My Himalya connects with Activesync and syncing is fine, but: Under WinXP (Network Connections) I have no adapter for my mobile device.
I also couldn´t ping my himalaya. I have entered the specific IP-Adress, DHCP is on.
So, what is my problem or what I´m doing wrong?
Please help
S-Bee
Related
hallo,i'm a question for you...i've installed in my jamin pda viet touch 6,gullum v6 and fantastic b4 and i have the same problem:the wi-fi connection start,but it connect for few second(30 sec)and so i can't connect to internet,use live messenger or skype etc etc....can someone help me.....helpppppppp..thanx in advantage
Yes, I have the same problem. Wifi will connect then disconnect after a short time. Live messenger will sometimes try to use GPRS while there is an active Wifi connection!
What may help is that once Wifi connects, open internet explorer and browse a few webpages on the internet. Then sign-in with MSN live messenger.
This may help your problem, but in general Windows Mobile is a very crude operating system.
thanx,but it is complicated...
sometimes there is a problem with DHCP and WM6. DHCP gives random ip to clients. just try to assign a ip to your pda. to assign a ip go to start-settings-connections-wi-fi and than on the network adapters trigger.select your wlan device( for me SDIO Wlan Wireless Adapter ). hit use specific ip address and enter a specific ip and your routers ip as gateway and first name server also router ip ! greetz spaxxi
which ip i insert?thanx in advantage
talk to your network administrator for the correct values.
you could copy the numbers of the ipconfig of a pc that's connected to the network and modify the last set of numbers. because every machine must have an unique ip number
good luck.
for WIFI problems ... try a other WM6 ... some WM6 have some strange Driver Problem!
i've installed wififofum and now go fine...i don't know?????????!!!!!!!!!!!!!
Hello,
i have a question regarding the modem functionality of the StrTrk under WM 6.1 Pro V2.
How can I share the Internet Connection of the phone to a Notebook?
(I already found the "Internet Sharing" shortcut but the question is what to do after...)
In order to find it out, i activated the Sharing through Bluetooth PAN. (On the telephone).
Now ist the the question what I have to do on my Notebook.
My Notebook displays me a Dial Up Connection and a Network Access Point Connection.
What I have to chose and what I have to enter on the Notebook then?
Is there anything to do with the telephone (except the sharing shortcut)?
Many Thanks for helpful answers!
No one for answer?
First off you will need to install active sync onto your laptop, then you will need a sync cable that will attach your phone to the USB port on your laptop. (bluetooth would be very hard to get working for this)
On your phone, start Internet sharing, and then select connect, after it says "Check USB cable connection", plug your phone into the sync cable that is plugged into your laptop.
The active sync will not try to sync but a new internet connection will be found by Windows XP.
Hope this helps
I have the same problem after I upgraded the ROM from HTC website. The upgraded ROM was still wm5. Now I upgrade the ROM from wm5 to wm6. The problem is still there. I checked the modem configuration in XP from control panel, but I can't find the modem device.
I also followed the advice here, but the screen of my phone just indicated "Check USB cable connection". I didn't get the instruction to connect the USB cable.
The upgrading was really nice for my phone except I can't use my phone as a modem. I do want to repair this problem.
Any idea?
Hello,
do you already installed active sync?
Another Problem:
I cant connect the phone through usb cable because the laptop is from the company where I work for. Iam not allowed to install any driver (On my own PC the Generic RNDIS is need to be installed). Is ist possible to have the modem functionality through Bluetooth without using Active Sync?
You don't need ActiveSync / Windows Mobile Device Center to use the Internet Sharing on WM6.
For connecting via USB, make sure you ActiveSync is disconnected and the USB cable is unplugged before you click Connect in Internet Sharing. When you receive the prompt for 'Check USB Cable Connection' plug the USB lead in again. Windows should now detect new hardware in form of a 'Remote NDIS based Internet Sharing Device' instead of the usual 'Smartphone USB Sync' and a new Local Area Connection should appear in Network Connections.
The Bluetooth PAN option depends on the Bluetooth Stack installed on Windows. If you have the default Microsoft Bluetooth Stack installed (Windows XP SP2 or Windows Vista) you can go to Network Connections (on Vista open Network and Sharing Center and click Manage Network Connections below Tasks) and double click on the Bluetooth Network Connection icon. In the dialog that opens the phone's Bluetooth PAN Connection should be listed for you to Connect to.
That's it. You should be browsing the Internet via GPRS / EDGE.
I did install Activesync. Even I can see the remote rndis Internet device after I plug the usb cord to my laptop, the modem doesn't work. I also can't find the modem in the control panel for it.
Thanks, I connected my Cingular 3125 to my computer. The connection is a local connection as a Ethernet card instead of a dial connection. So I don't have to set up a modem driver for it.
Just in case I wasn't clear, you don't need ActiveSync for this to work, the functionality is done entirely separately.
There is no modem device any more, it's all done using a "Virtual" Local Area Network which you'll find listed in Network Connections.
You shouldn't need to configure anything, just plug in the USB cable and wait a few seconds. The phone should initiate a GPRS / EDGE connection automatically and you should then have access to The Internet.
If it doesn't, you may need to temporarily disable any other Local Area Connections (especially any that are used for Internet access) so that your PC is forced to use the one provided by the phone's virtual network connection.
Thanks, your explanation is very clear. The process is exactly like what you said.
StarTrek can be connected with Ubuntu as a Ethernet card now.
Please check "How To: Internet sharing on USB with Linux and Windows Mobile."
http://ubuntuforums.org/showthread.php?p=5563028
Hello,
I have internet on my Desktop PC and connect it using the cable to my hd2 through active sync.
so I want to use the HD2 router to connect my laptop to this internet connection. However, when I open the router I cannot rout the active sync. connection but I can only rout the internet from my service provider or 3g which i dont want.
I hope you can help me solve this issue because I really want to use internet on my laptop using my Desktop PC connection through my HD2.
uppppp please anyone answer me
any body wanna answer
So you want your internet connection through usb
I dont believe the wifi router software is capable of routing wifi connections to the usb connection. Only to teh mobile data connection. Perhaps there is other hotspot software that can do this, but the built in one wont. (unless i'm dead wrong, but fairly sure not)
maybe this is what you are searching: http://www.wmwifirouter.com/download/WMWifiRouter-International.cab
Im using the wifirouter with no issue, works well with my data plan!
So I have Windows 7 OS and installed Windows mobile device 6.1. When I connect my HD2 on USB it turns off my wireless network. Can somebody help me to solve this problem.
Haven't really looked into it, but I have mine (on XP) connect to Internet as soon as I use activesync, so it makes sense it disconnects from WiFi, as it does indeed.
yeah thats just normal.
your phone gets access to the internet through your pc...so the w-lan isn't needed.
DN41
Bought Spice Mi-350 in India, having Android 2.3.3 Version. I need to use my PC Internet connection for browsing and using Android market on my phone (Without wi-fi). Please help...
Please help
Please help. I have already rooted my phone with Superoneclick. Downloaded a Terminal emulator on phone. Still not able to connect to internet.
My Internet connection on PC is a cable connection with it showing in XP as WAN Miniport (PPPoE) connection. My Android phone connection, after tethering shows as Local Area Connection-2 (Android USB Ethernet/RNDIS#2). I am unable to bridge the two connections....
Hi
You can probably share internet connection thru bluetooth if you dont have wifi adapter!
Google "Sharing internet connection through BT"
Try this:
http://www.best-4-u.com/simple-tric...-between-pc-and-android-phone-using-wifi.html
Learn frm this thread:
http://androidforums.com/g1-support...-between-android-my-pc-through-usb-cable.html
@kats17
The links that you mentioned have already been seen by me. Either they are talking of tethering (and not reverse-tethering, which is using PC internet connection on phone), or of bridging two LAN connections in XP. Nevertheless, thanks for your help.
As said earlier, I have a cable connection on my XP PC, which is showing as a WAN Miniport (PPPoE) connection. This connection is not getting bridged with my LAN (Android) connection, and therefore I am unable to complete the connection.
Please help anybody..