After 1 week that I use TNT 4 ROM , it seem a problem in my JAMIN
my jamin hang some times.
I installed these programs:
Battery Pack pro
Chronous Alarm
SPB Diary
SKTools
Resco Explorer
..
1-my jamin Hang and I don't know what !!
2-some times after restarting the startup screen( Balck page that written Windows Mobile 2006..) appear and don't load Windows then I must reset via pen my mobile.
3- today the biggest problem was happend.
after reastarting my device the blue page (that written IPL/ SPL/GSM/OS) appear and not happend after it ! in blue page my device stop !
I must restart 10-20 times with pen to load windows !
I try to upgrade my radio rom
it was:
IPL:2.13.0001
SPL:2.13.0001
GSM:02.20.21
OS:4.0.0.0
I upgrade it to 2.69 radio rom:
IPL:2.13.0001
SPL:2.13.0001
GSM:2.69.21
os:4.0.0.0
but my device in Blue page stop !!(in blue page written: i-mate ...)
My device work for 1 week ! why this problem appeare?
who can help me?
Thanks alot
Did you try to Hard Reset? (I think no)
Press and Hold Camera + Commanager botton and then press Soft reset botton
After that , It will become black screen with some white text , Then press Call botton.
In after few seconds you Prophet will come to life again.
PS. Hard reset may erase all of your data in phone memory.
maair said:
Did you try to Hard Reset? (I think no)
Press and Hold Camera + Commanager botton and then press Soft reset botton
After that , It will become black screen with some white text , Then press Call botton.
In after few seconds you Prophet will come to life again.
PS. Hard reset may erase all of your data in phone memory.
Click to expand...
Click to collapse
Oh dear friend
Are u sure that after Hard Reset my Prophet come to life??
My Jamin was in health and work well.
but aftre some days these problems appeare !!
Is it because of radio Rom?
Are you sure that after some dayd later and isnatalling some programs these problems does not appeare?
Thanks
ebaskar said:
Oh dear friend
Are u sure that after Hard Reset my Prophet come to life??
My Jamin was in health and work well.
but aftre some days these problems appeare !!
Is it because of radio Rom?
Are you sure that after some dayd later and isnatalling some programs these problems does not appeare?
Thanks
Click to expand...
Click to collapse
First off all, I feel sorry for you that your device stopped working the way it should, I mean that. But I wonder why you start this thread claiming the some ROM has killed your Prophet and then tell us that fooled around quite a bit with all kind of unrelated software and flashing.
Did you tried to find out what really causes your trouble? Did you reflash and installed the 3d party software one by one to isolate the one that to blame?
For what it's worth, I'v red about problems with SPB Diary somewhere in one of the treads. As I don't use it myselve I don't recall any details.
Of course!
Even if Hard Reset is not work , You can still flash your phone to Other rom such as PDAVIET , gollum Touch rom or WM5 official rom.
One thing you must check is just what version of the rom (G3 or G4).
ps. I use radio rom 2.69 for a while with no problem. Now I use 2.61 because it use less battery than 2.69 and have more stable on phone signal.(with my operator , True in Thailand)
rondol1 said:
First off all, I feel sorry for you that your device stopped working the way it should, I mean that. But I wonder why you start this thread claiming the some ROM has killed your Prophet and then tell us that fooled around quite a bit with all kind of unrelated software and flashing.
Did you tried to find out what really causes your trouble? Did you reflash and installed the 3d party software one by one to isolate the one that to blame?
Click to expand...
Click to collapse
Dear friend
I try to find what happen to my device, I always install programs one by one to make sure it does not damage my device.
I don't know why this problems happend !
I read all discussion in this FORUM about Stucking bootloader page..but not solving my problem...all of them hang their devices after upgrading rom, I use my prophet for some days after upgrading to TNT 4 ! after reseting in the blue page my device stopped !! I Must reset my device with pen some time to maybe load windows (
please help me to solve these problems because all program are standard and work in Windows mobile 2005-6
If a program damage my device loading windows is crashed, but i sayd in Ble page that written I-Mate ...SPL/IPL/GSM/OS... my device STOPED !
ebaskar said:
Dear friend
I try to find what happen to my device, I always install programs one by one to make sure it does not damage my device.
I don't know why this problems happend !
I read all discussion in this FORUM about Stucking bootloader page..but not solving my problem...all of them hang their devices after upgrading rom, I use my prophet for some dayd after upgrading to TNT 4 ! after reseting in the blue page my device stopped !! I Must reset my device with pen some time to maybe load windows (
please help me to solve these problems
Click to expand...
Click to collapse
Just a hunge... did you reset while connected to USB (Active Sync)? That is known to be a problem whit all the WM6 ROM's. It seems that all that helps is an proper HR. And as I added to my previous remark, SPB Diary seems to be a troublemaker too, when used with the new WM6 ROM's, but as I don't use it, I'am not familar with the details.
rondol1 said:
Just a hunge... did you reset while connected to USB (Active Sync)? That is known to be a problem whit all the WM6 ROM's. It seems that all that helps is an proper HR. And as I added to my previous remark, SPB Diary seems to be a troublemaker too, when used with the new WM6 ROM's, but as I don't use it, I'am not familar with the details.
Click to expand...
Click to collapse
no, not after Active sync
It is random , it means a little time, after soft reset or after power off device my Jamin load correctly and in more times it hang and stop in Blue page !!
It is very wonderful !!
I am now Hard resetting my device
It is too hard for me to hard resetting my device because all program that i installed are deleted
I don't use backup software because I belleave if a problem is in my device in backup file is come too.
Hello,
If you want to use your phone and not mess around with it , just stop upgrading ,downgrading!! I really mean it. yes of course a hard reset will delete all your files and programs but if you want to care about these stuff , you really have to consider to stop messing with your device. I think if one day your prophet die, you are the person responsible not any ROM.
Just read the wiki / forum, use the search button and you will find what is good for your device, and what's gonna kill your device
about SPB Diary, I've been using this program since i bought my prophet, and i've had no problem with it so far. if you read the forum you will know that after upgrading or downgrading your radio rom you MUST perform a hard reset.
good luck my friend.
I am sorry to hear that.
节哀顺变吧！如果你来广东，我帮你修。可惜你是外国的。
I have the same problem, but my prophet not kiled!!! I'm sure is problem in some programs. I remove the battery and sim card. Wait some time, and back. After that prophet boot normal, but everytime when I power off (and sometimes after softreset) i have to do that. Somtimes help just softreset. I have same problem (not always) with PDAVIET and Gullum rom after installing 3d party software.
Sorry for my english.
I'm realy sad to hear about your problem with the phone but to say that it's the rom is a bit to much although some thing in the rom might give problems it's know that the 6 button homeplug is causing frezz on some devises.... but I have not expirienced any frezz on startup myself... and I have used TNT and all gullum roms .... so maybe the problem is related to IPL/SPL or radio rom not shure or even 3dr party software.. if it's not IPL/SPL or radio rom it must be 3dr party software because I have not installed any of them except for PocketCM by tena
ninjaz said:
I have the same problem, but my prophet not killed!!! I'm sure is problem in some programs. I remove the battery and sim card. Wait some time, and back. After that prophet boot normal, but every time when I power off (and sometimes after soft reset) i have to do that. Sometimes help just soft reset. I have same problem (not always) with PDAVIET and Gullum rom after installing 3d party software.
Sorry for my english.
Click to expand...
Click to collapse
Which programs did you installed?
after 6-7 programs i installed my prophet hang in blue screen page !
I try to load windows after reset my device about 10 times with its pen, and uninstall new program i installed :Resco photo Viewr 6.33 professional edition,SMS group,Sprite mobile...but the problem not solved...and i hard reset my device again
if the problem occur in your device too because of these programs (such as sprite mobile (for prevention of stealing and thief mobile) then we can say the problem is because of this program (sprite mobile-but i know this program is compatible with WM6 ) .
If not it is a bug in TNT ROM that can't install more programs.
or we can say Soft reseting is limited in this ROM for example if soft reset is more that 30 times the windows not loaded !!!
I don't know, but it is a bug in this ROM !! so if this bug is in other W6 ROMs I come back to Aserg AKU 3.13
gullum said:
I'm realy sad to hear about your problem with the phone but to say that it's the rom is a bit to much although some thing in the rom might give problems it's know that the 6 button homeplug is causing frezz on some devises.... but I have not expirienced any frezz on startup myself... and I have used TNT and all gullum roms .... so maybe the problem is related to IPL/SPL or radio rom not shure or even 3dr party software.. if it's not IPL/SPL or radio rom it must be 3dr party software because I have not installed any of them except for PocketCM by tena
Click to expand...
Click to collapse
Dear Gullum
we know that PPC is good for world of different program can be installed in these devices. and we know the programs in the ROM is not sufficient so we installed needed programs.
I know TNT 4 is full of application that non of the other ROMs don't have them.
I try to check some programs I installed in Prophet (TNT-4 -jamin)
the Sprite Mobile program work well, not any other program i installed, only Sprite Mobile...The device work well.
So it is a bug in ROM that can't initializing more program installed then windows not loaded !
if a ROM has this Bug we can't use it !!
we should check all WM6 ROMs and installed more that 10 famous Programs and soft reset every time we install a program.
So which WM6 ROM do u offer to install in our devices to work stable and correctly without this Huge bug that can't install programs !! ?
Thanks for your guidance.
The problem not solved
I installed some programs in my device (Jamin) but this problem appeare after installation, I installed one by one and accure for new problem but after softrest this problem appeare again
GULLUMN plz install some program in ur new ROM if work then put it in public.
only cube & touch version of ROM is not sufficient, we should can install programs on our ROM for more usage !
any body can help?
hi
hi im saeid from iran.
ebaskar
my device is to you
after 24 to 72 hours my my device drive is cleared!!!
all data loosed!!!
after hard reset, again after 24 to 74 hours repeat!
its virus on your memory card.
after any hard reset
you opening SD card and installing some programs...
this virus is run!!!
please format your sd card and close of device
so press camera and commanager button and press soft reset...
after black screen prees green key(call)
your devise is wholesome!!!
excuse me
my english is bad
I think i understand ur problem and yes its the rom to blame after flashing a next rom I did not have this problem well the solution was when u install any programs to your storage card remove the .ink files from Windows/Programs folder of all applications thats installed on the SD card and from startup folder after doing that it works well but as soon as I installed a program or tryed to make a shortcut it gives problems I suggest that you ether flash a next rom and problem salved or get a rom cook to edit the rom and fix it up to remove this bug hope it helps you can try it u got nothing to lose
Hi,
I installed VillainRom 5.3. All is great and ok but it's not ok when I try to use RSS from HTC News app (not widget...and anybody has that issue). I get FC everytime. Then I can't reset also autokiller app.
I was thinking to try a soft or hard reset. Do you think is a good idea? Can I do it also with a custom rom? How can I do it?
Thank you.
Hard reset; taking out the battery,
Soft reset; close app/whatever and open it again.
Correct me if I'm wrong but I'm sure this is what it is, "Hard" reset being, hardware. "Soft" reset being software...
n00b001 said:
Hard reset; taking out the battery,
Soft reset; close app/whatever and open it again.
Correct me if I'm wrong but I'm sure this is what it is, "Hard" reset being, hardware. "Soft" reset being software...
Click to expand...
Click to collapse
Yes, correct.
I made a hard reset and now I don't have anymore some apps of Villainrom I had before (3D Gallery, News and Weather, ecc..)
That's extreamy odd.. You just took out the Battery and restarted the phone?
Did you;
Flash the rom,
restart,
install apps,
froze,
hard reset
- missing apps?
Try and reflash the ROM with this method, or backup a previous Nandroid backup,
Go into recovery, restart + hold down Home
Wipe everything
Flash Latest Radio
Restart
Flash ROM
Restart + let ROM load, this will take a while (Up to 20 mins)
Have a look at your new rom, but don't bother doing anythign (Setting ect..)
Restart
Now, when the ROM loads it will be quicker and you can use it normaly
After a few restarts it tends to get slighty quicker.
Have fun
I solved the problem installing the new version of the ROM.
Hi guys... try to search and google for an answer to my problems but cant find the solutions..
problems : let say i turn on my hd2 at 1.00 pm on12/08/10....
and at 1.30 pm on 13/08/10 i turn off the phone and replace the battery with fresh one .. turn it on... the clock will show the time and date as 1.00pm 12/08/10...
time will be reset back to time i on the phone on the first time and it will continue the cycle...
try hard reset but the bugs still there... clear all my apps.. clean phone... bugs still there....
my phone using stock ROM 1.48,702... everything is stock...
itsx all start after i do some tweaking & installing apps which i hv uninstall now.. but the problemis still there,,..
Anybody have this problems before.. ? any idea / tips for the problems.. thks guys and sorry if this repeating Q ...
Same here, tried hard reset or flash another rom but the problem still here...
Any ideas
Will it be a hardware issue?? Pls help!!
no one know?
HTC service Center advised the following :
1. Take out sim card and storage card to eliminate the error tht maybe caused by this 2 items... i've done it... and restart... walaaa... like a charm it works...
But on fine fine day i install cab file... then the old problem again haunted my hd2...
tried the above methods.. this its no longer worked..
Fed-up, i just let it be like that... then on one fine day.. I install another cab file... CHT and CHT Editor to be exact... walaaa... the old problem eliminated.. hv install/uninstall few cab file after tht (analog clock cab file).. so far everything still ok..
I would like to refresh this topic.
It started to happen to me like month ago from no special reason. I use SD Android build, so with every restart to go back to WM, time/date changes from couple minutes to couple weeks to both directions.
Hard reset did not help. Another ROM flashed did not help.
It seems to occur only when rebooting Android -> WM. WM -> WM reset direction mostly OK. Battery-out almost always changes time/date.
Just a thought: Is there any kind of "CMOS battery" like in PC motherboards, that can be weak/broken in the HD2?
Any advice appreciated
Thanks
doktor2003 said:
I would like to refresh this topic.
It started to happen to me like month ago from no special reason. I use SD Android build, so with every restart to go back to WM, time/date changes from couple minutes to couple weeks to both directions.
Hard reset did not help. Another ROM flashed did not help.
It seems to occur only when rebooting Android -> WM. WM -> WM reset direction mostly OK. Battery-out almost always changes time/date.
Just a thought: Is there any kind of "CMOS battery" like in PC motherboards, that can be weak/broken in the HD2?
Any advice appreciated
Thanks
Click to expand...
Click to collapse
I've got the same problem using Omega rom v30. It's solved easily enough by using sptimesync to get the exact time. What's your rom? I'm gonna flash and see if anything changes
My ROM is:
WM- HD2O
Android - MccM HD V6
This is also happening to me. It's happened before and it somehow corrected itself, but it's really annoying me at the moment. Any ideas as to the cause? Running WM6.5 ROM, stock 3.14. Not running android at all.
Hi all, I have a strange problem during the calls.
The call start normally but then a buzz-noise starts, at this point I cannot ear anymore the other person. I can end the call, but still the noise is there. The phone doesn't seem blocked. The buzz is unstoppable until I reset the phone and restart. This problem happens quite often and so my phone is quite unusable...
I have these versions:
build: 21876.5.0.72
software: 5005.0001.76
SP-00
RIL 1.0
radio: 5001.0001.76
If someone has the same problem or know how to solve, I will appreciate the help.
Thanks
Ivan
ivan1975 said:
Hi all, I have a strange problem during the calls.
The call start normally but then a buzz-noise starts, at this point I cannot ear anymore the other person. I can end the call, but still the noise is there. The phone doesn't seem blocked. The buzz is unstoppable until I reset the phone and restart. This problem happens quite often and so my phone is quite unusable...
I have these versions:
build: 21876.5.0.72
software: 5005.0001.76
SP-00
RIL 1.0
radio: 5001.0001.76
If someone has the same problem or know how to solve, I will appreciate the help.
Thanks
Ivan
Click to expand...
Click to collapse
Try a custom rom. Flash it with better radio roms that are available on this forum. If you haven't flashed your phone before, please read the instructions in the TG01 Rom section's sticky carefully. http://forum.xda-developers.com/showthread.php?t=654674
I had similar problem with Orange rom and after flash, I have never had any so called call issues.
drupad2drupad said:
Try a custom rom. Flash it with better radio roms that are available on this forum. If you haven't flashed your phone before, please read the instructions in the TG01 Rom section's sticky carefully. http://forum.xda-developers.com/showthread.php?t=654674
I had similar problem with Orange rom and after flash, I have never had any so called call issues.
Click to expand...
Click to collapse
yes I already flashed it the same day I bought it. It was with the french Orange version, so I changed to the uk Orange version. I was thinking to try a custom rom but I am afraid to have then more instability respect to the official one.
I can say that the quality of the call when there is not the strange buzz-noise is good.
What type of ROM can you suggest? I mean a stable and robust one.
Thanks
Ivan
If you want to stick to just a neat rom with most programs removed, so that you can customize by adding cabs yourself - go for FFBoy's or miRoM
If you want something sense based - Aragon's rom or StonRom.
If you want to be adventurous and try something different - StonRom's maker Leeston, has put out couple of roms which are not very stable, but usable. You can also try miRom's hybrid rom which has spb shell, sense etc all mixed up.
There are plenty of sense roms out there by Aragon, FFboy, miRom, Leeston that I have used and I like.
I personally don't find any of the sense roms stable as there is an issue with HTC messaging and sometimes wireless. I haven't seen any solution to HTC messaging till date. Hence I have stopped using them.
I like Leeston's roms that are not Sense based. But they are being tweaked by Leeston to make them better, so you might not call them 'stable' just yet.
I am currently using miRom's clean stock rom. I had plenty of space so I have installed about 23 cabs on it to customize by my needs - even after that it's fast, stable, no-freeze, no hard resets needed, plenty of available memory and very usable.
drupad2drupad said:
If you want to stick to just a neat rom with most programs removed, so that you can customize by adding cabs yourself - go for FFBoy's or miRoM
If you want something sense based - Aragon's rom or StonRom.
If you want to be adventurous and try something different - StonRom's maker Leeston, has put out couple of roms which are not very stable, but usable. You can also try miRom's hybrid rom which has spb shell, sense etc all mixed up.
There are plenty of sense roms out there by Aragon, FFboy, miRom, Leeston that I have used and I like.
I personally don't find any of the sense roms stable as there is an issue with HTC messaging and sometimes wireless. I haven't seen any solution to HTC messaging till date. Hence I have stopped using them.
I like Leeston's roms that are not Sense based. But they are being tweaked by Leeston to make them better, so you might not call them 'stable' just yet.
I am currently using miRom's clean stock rom. I had plenty of space so I have installed about 23 cabs on it to customize by my needs - even after that it's fast, stable, no-freeze, no hard resets needed, plenty of available memory and very usable.
Click to expand...
Click to collapse
Thanks
yes I prefer stability in a phone, thinking also to the emergency call. Thinking that the phone could freeze during an emergency call, make me unconfortable.
I will try a clean rom.
Thanks for the help
ivan1975 said:
Thanks
yes I prefer stability in a phone, thinking also to the emergency call. Thinking that the phone could freeze during an emergency call, make me unconfortable.
I will try a clean rom.
Thanks for the help
Click to expand...
Click to collapse
Good luck mate! I hope it works out well for you.
It's real annoying when phones stop working as phone but more like iPhone!
Also, through experience radio 1600/1700 work better. But depends on network provider. For me 1600 is better than 1700.
drupad2drupad said:
Good luck mate! I hope it works out well for you.
It's real annoying when phones stop working as phone but more like iPhone!
Also, through experience radio 1600/1700 work better. But depends on network provider. For me 1600 is better than 1700.
Click to expand...
Click to collapse
I was thinking to have solved the problem, but not. I installed both the mirom4 and the mirom8 but the same call problem (both with radio 1700). The mirom8 is perfect, but I cannot use the phone. I first buyed this phone with the french language and win 6.5.0 so I tryed to install back an official toshiba rom with the french language and it works . The phone works. With the official english version it doesn't work. The radio of this version is the 5001.0201.76 and the build of the system is 21876.5.0.72 exactly as the english version but only the radio is different.
Could someone explain me why it works only with the french operating system?
An other test! I installed the spb shell 3.5.5 on the french operating system and the phone makes the same problem....
Deinstalling it, and only after an hard reset the phone works again.
Why the hard reset is necessary, what are the components of the spb shell that can cause the problem?
At this point I believe it is a software problem...
To describe better the problem I saw that when the audio freeze during the conversation, if I try to modify the volume settings the window with the volumes appears but I can see only the system volume while the phone volume is a black empty space. The phone is responsive for a while, then it crash completely and only after a soft reset it restars.
It is a big big problem
ivan1975 said:
I was thinking to have solved the problem, but not. I installed both the mirom4 and the mirom8 but the same call problem (both with radio 1700). The mirom8 is perfect, but I cannot use the phone. I first buyed this phone with the french language and win 6.5.0 so I tryed to install back an official toshiba rom with the french language and it works . The phone works. With the official english version it doesn't work. The radio of this version is the 5001.0201.76 and the build of the system is 21876.5.0.72 exactly as the english version but only the radio is different.
Could someone explain me why it works only with the french operating system?
An other test! I installed the spb shell 3.5.5 on the french operating system and the phone makes the same problem....
Deinstalling it, and only after an hard reset the phone works again.
Why the hard reset is necessary, what are the components of the spb shell that can cause the problem?
At this point I believe it is a software problem...
To describe better the problem I saw that when the audio freeze during the conversation, if I try to modify the volume settings the window with the volumes appears but I can see only the system volume while the phone volume is a black empty space. The phone is responsive for a while, then it crash completely and only after a soft reset it restars.
It is a big big problem
Click to expand...
Click to collapse
Try the italian radio
5001.0300.76
All european users have positive feedback using it
ivan1975 said:
I was thinking to have solved the problem, but not. I installed both the mirom4 and the mirom8 but the same call problem (both with radio 1700). The mirom8 is perfect, but I cannot use the phone.
Could someone explain me why it works only with the french operating system?
An other test! I installed the spb shell 3.5.5 on the french operating system and the phone makes the same problem....
Deinstalling it, and only after an hard reset the phone works again.
Why the hard reset is necessary, what are the components of the spb shell that can cause the problem?
To describe better the problem I saw that when the audio freeze during the conversation, if I try to modify the volume settings the window with the volumes appears but I can see only the system volume while the phone volume is a black empty space. The phone is responsive for a while, then it crash completely and only after a soft reset it restars.
It is a big big problem
Click to expand...
Click to collapse
When you say miROM8 is perfect but you cannot use the phone - does it mean, it doesn't flash properly or it keeps freezing? or does it only have call issues? I remember miROM talking somewhere about different language issues in his posts, I will try and dig into it. I am sure there is some sort of solution for language issues with roms and SPB Shell too - just hang in there.
I am presuming it's an radio issue now. But there is a way to change radios irrespective of what rom you install. its here - http://forum.xda-developers.com/showthread.php?t=699764
wafeeq said:
Try the italian radio
5001.0300.76
All european users have positive feedback using it
Click to expand...
Click to collapse
I have not tried this radio, but would be worth a go if it is going to make my phone even better!
drupad2drupad said:
When you say miROM8 is perfect but you cannot use the phone - does it mean, it doesn't flash properly or it keeps freezing? or does it only have call issues? I remember miROM talking somewhere about different language issues in his posts, I will try and dig into it. I am sure there is some sort of solution for language issues with roms and SPB Shell too - just hang in there.
I am presuming it's an radio issue now. But there is a way to change radios irrespective of what rom you install. its here - http://forum.xda-developers.com/showthread.php?t=699764
I have not tried this radio, but would be worth a go if it is going to make my phone even better!
Click to expand...
Click to collapse
With Mirom8 the system is fast and stable and the issue of the call that freeze happens only after some minutes (2-3 minutes). With mirom4 instead the problem is quite simultaneus at the start of the call (less than one minute). Mhmm I am not sure if it is a radio issue. If it is a radio issue, why the french version stopped to work when I installed the spb shell? Does the spb shell modify the radio files?? I was more thinking to a windows problem. But I am completely ignorant about this system and how it works.
I could try the italian radio, but I am starting to be afraid that I will never find a stable solutuion. I am thinking it is a software problem, but I cannot exclude an hardware failure of my system.
Thanks
Ivan
ivan1975 said:
With Mirom8 the system is fast and stable and the issue of the call that freeze happens only after some minutes (2-3 minutes). With mirom4 instead the problem is quite simultaneus at the start of the call (less than one minute). Mhmm I am not sure if it is a radio issue. If it is a radio issue, why the french version stopped to work when I installed the spb shell? Does the spb shell modify the radio files?? I was more thinking to a windows problem. But I am completely ignorant about this system and how it works.
I could try the italian radio, but I am starting to be afraid that I will never find a stable solutuion. I am thinking it is a software problem, but I cannot exclude an hardware failure of my system.
Thanks
Ivan
Click to expand...
Click to collapse
hello Ivan,
load my RADIO changing Kitchen. http://forum.xda-developers.com/showthread.php?t=823706
With this you can extract the FRENCH Radio and combine with another ROM, as miROM8.
hope it helps, miro
ivan1975 said:
With Mirom8 the system is fast and stable and the issue of the call that freeze happens only after some minutes (2-3 minutes). With mirom4 instead the problem is quite simultaneus at the start of the call (less than one minute). Mhmm I am not sure if it is a radio issue. If it is a radio issue, why the french version stopped to work when I installed the spb shell? Does the spb shell modify the radio files?? I was more thinking to a windows problem. But I am completely ignorant about this system and how it works.
I could try the italian radio, but I am starting to be afraid that I will never find a stable solutuion. I am thinking it is a software problem, but I cannot exclude an hardware failure of my system.
Thanks
Ivan
Click to expand...
Click to collapse
mirolg said:
hello Ivan,
load my RADIO changing Kitchen. http://forum.xda-developers.com/showthread.php?t=823706
With this you can extract the FRENCH Radio and combine with another ROM, as miROM8.
hope it helps, miro
Click to expand...
Click to collapse
I don't think SPB will have any effect on radios. Try Miro's solution, it will work. Did you see if your SPB version has got correct language? There is some sort of registry edit too, regarding SPB shell - it comes in many languages. However, let's not go into reg edit just yet, if Miro's solution will solve it for you.
Also one important thing - are you flashing the rom correctly? i.e. hard reset after the flash by holding volume up + camera + power? It makes a huge difference by doing so. If it doesn't work, try flashing stock rom, then hard reset, then miROM8 then hard reset, then spb shell and then soft reset - this might solve if it's silly bug!
Good luck
drupad2drupad said:
I don't think SPB will have any effect on radios. Try Miro's solution, it will work. Did you see if your SPB version has got correct language? There is some sort of registry edit too, regarding SPB shell - it comes in many languages. However, let's not go into reg edit just yet, if Miro's solution will solve it for you.
Also one important thing - are you flashing the rom correctly? i.e. hard reset after the flash by holding volume up + camera + power? It makes a huge difference by doing so. If it doesn't work, try flashing stock rom, then hard reset, then miROM8 then hard reset, then spb shell and then soft reset - this might solve if it's silly bug!
Good luck
Click to expand...
Click to collapse
Hi guys I quoted only one answer but I thanks all of you. So I think that your suggestions are good. I must try to create a rom with the radio that presumably could work with the rest that I like. I made the hard reset every time I flashed a new rom. So what I can do is to make the hybrid rom and then flash it on the phone after the stock rom making an hard reset every time.
Ok I will try, I like this little piece of tecnology
Hi all, so an update to the situation. I tried to install the radio 5001.0300.76 on the mirom8, but after the installation i choosed the spb shell as interface without trying a first call on the fresh installation.
I made a tentative after the installation of the spb shell and I was unable to make a call longer than 30 seconds.
So I used the rom 5001.0201.76 from the french rom in the mirom8. This time I tried to make a call without setting the spb shell as interface but using first the windows interface.
It worked!!! I was able to make a call!
Then I tryed to use the spb shell and the same problem! The call was freezing.
So I tried with the HTC interface and it is working!
I don't know if with the radio 5001.0300.76 could work. I think yes. But for the moment I will keep this version.
The only thing is that I prefer the spb shell and not the HTC but for now I am happy to have a working phone.
I am wondering, what is the cause of this failure? Is my phone buggy? I mean the hardware of my phone in theory is the same of yours, so why I am not able to run all the roms?
ivan1975 said:
Hi all, so an update to the situation. I tried to install the radio 5001.0300.76 on the mirom8, but after the installation i choosed the spb shell as interface without trying a first call on the fresh installation.
I made a tentative after the installation of the spb shell and I was unable to make a call longer than 30 seconds.
So I used the rom 5001.0201.76 from the french rom in the mirom8. This time I tried to make a call without setting the spb shell as interface but using first the windows interface.
It worked!!! I was able to make a call!
Then I tryed to use the spb shell and the same problem! The call was freezing.
So I tried with the HTC interface and it is working!
I don't know if with the radio 5001.0300.76 could work. I think yes. But for the moment I will keep this version.
The only thing is that I prefer the spb shell and not the HTC but for now I am happy to have a working phone.
I am wondering, what is the cause of this failure? Is my phone buggy? I mean the hardware of my phone in theory is the same of yours, so why I am not able to run all the roms?
Click to expand...
Click to collapse
First of all, I am so glad you can now use your phone as a phone!
Secondly, I think it's something to do with bugs left from your installation.
I would even advice you another flash process : This one has ALWAYS worked for me, when I thought I had bugs that won't go with hard reset. I don't know if 'bugs left after hard reset' theory is true technically, but for me it works. Try the following:
Get the phone back up so that you don't have to look for contacts.
You can also get a program called - XDA_UC - it's brilliant piece of work. Put all your cabs for this program as instructed and you won't ever have to worry about installing cabs after flash - http://forum.xda-developers.com/showthread.php?p=6928610#post6928610
Once you are ready, hard reset your phone. Then get miROM4 http://www.miromworld.webs.com/ to flash on it. Hard reset etc after flash. Then install clean SPB SHELL on this miROM4 - it works like charm. If you want customization, use MSkip's Ultimate Elegance V2
http://forum.xda-developers.com/showpost.php?p=5373943&postcount=1715
and you will never not love your phone. Just remember to edit the radio in miROM4 before you flash. I have got this on my phone and it works fast, stable, beautiful, accessible and fun!
Hope this helps.
drupad2drupad said:
First of all, I am so glad you can now use your phone as a phone!
Secondly, I think it's something to do with bugs left from your installation.
I would even advice you another flash process : This one has ALWAYS worked for me, when I thought I had bugs that won't go with hard reset. I don't know if 'bugs left after hard reset' theory is true technically, but for me it works. Try the following:
Get the phone back up so that you don't have to look for contacts.
You can also get a program called - XDA_UC - it's brilliant piece of work. Put all your cabs for this program as instructed and you won't ever have to worry about installing cabs after flash - http://forum.xda-developers.com/showthread.php?p=6928610#post6928610
Once you are ready, hard reset your phone. Then get miROM4 http://www.miromworld.webs.com/ to flash on it. Hard reset etc after flash. Then install clean SPB SHELL on this miROM4 - it works like charm. If you want customization, use MSkip's Ultimate Elegance V2
http://forum.xda-developers.com/showpost.php?p=5373943&postcount=1715
and you will never not love your phone. Just remember to edit the radio in miROM4 before you flash. I have got this on my phone and it works fast, stable, beautiful, accessible and fun!
Hope this helps.
Click to expand...
Click to collapse
Thanks
I would also try to make my own rom
Here I found a lot of help
I am also interested in android on our phone. I saw that they are quite succeding in booting the kernel. I would also try this, becasue at work I am using linux and I am programming under linux.
Having linux on our phone could be very useful.
Thanks I will try the procedure you suggested!
Ciao
ivan1975 said:
Thanks
I would also try to make my own rom
Here I found a lot of help
I am also interested in android on our phone. I saw that they are quite succeding in booting the kernel. I would also try this, becasue at work I am using linux and I am programming under linux.
Having linux on our phone could be very useful.
Thanks I will try the procedure you suggested!
Ciao
Click to expand...
Click to collapse
cool, cool, cooll. i will to be the first that testing your AndroidROM!
i wish you a good work
ivan1975 said:
Thanks
I would also try to make my own rom
Here I found a lot of help
I am also interested in android on our phone. I saw that they are quite succeding in booting the kernel. I would also try this, becasue at work I am using linux and I am programming under linux.
Having linux on our phone could be very useful.
Thanks I will try the procedure you suggested!
Ciao
Click to expand...
Click to collapse
I am using Linux on my laptop at home too! I can't say how excited I am to use linux. I wish I could know more about linux, but I've just ditched Windows about 2 months back. So I am a very newbie with no idea to linux cmd line but only GUI. If you need tester for anything please let me know.
drupad2drupad said:
I am using Linux on my laptop at home too! I can't say how excited I am to use linux. I wish I could know more about linux, but I've just ditched Windows about 2 months back. So I am a very newbie with no idea to linux cmd line but only GUI. If you need tester for anything please let me know.
Click to expand...
Click to collapse
eh eh eh no no quiet! I am saying I would try the kernel that the guys in toshdroid are implementing now. I am using linux since more than 15 years. But using and programming under linux is a different thing than the ability to make reverse enginering on a complex device as our phone. It is a very complex job.
But I want try to boot the kernel that the toshdroid developers are testing
For now I am enjoing the working phone
drupad2drupad said:
First of all, I am so glad you can now use your phone as a phone!
Secondly, I think it's something to do with bugs left from your installation.
I would even advice you another flash process : This one has ALWAYS worked for me, when I thought I had bugs that won't go with hard reset. I don't know if 'bugs left after hard reset' theory is true technically, but for me it works. Try the following:
Get the phone back up so that you don't have to look for contacts.
You can also get a program called - XDA_UC - it's brilliant piece of work. Put all your cabs for this program as instructed and you won't ever have to worry about installing cabs after flash - http://forum.xda-developers.com/showthread.php?p=6928610#post6928610
Once you are ready, hard reset your phone. Then get miROM4 http://www.miromworld.webs.com/ to flash on it. Hard reset etc after flash. Then install clean SPB SHELL on this miROM4 - it works like charm. If you want customization, use MSkip's Ultimate Elegance V2
http://forum.xda-developers.com/showpost.php?p=5373943&postcount=1715
and you will never not love your phone. Just remember to edit the radio in miROM4 before you flash. I have got this on my phone and it works fast, stable, beautiful, accessible and fun!
Hope this helps.
Click to expand...
Click to collapse
After some days of work, I was quite happy, but today the same problem. I was on a call and suddelny the crash. No SPB shell, no other software installed. I will try as last tentative the procedure of flash different times with the master clear. If then I will have the same problem I will send back the phone. At this point I cannot exclude that my phone is buggy in the hardware