In my ongoing effort to find the perfect case I just came across this one on eBay:
http://cgi.ebay.com/Cingular-HTC-81...QQihZ014QQcategoryZ146430QQrdZ1QQcmdZViewItem
Does anyone have any experience with it? My main point of concern is how does one get to the slideout keyboard?
Thanks
David
My guess is that you'd have to remove it from the case to use the keyboard. As far as I know, the only soft cases that allow you access to the keyboard are the PDAir and the Piel Frama (the one with a snap strap, not the other one).
That case is awful as well as the metal cases they have on ebay, I have them both and I dont like either one, still trying to find a case for my wizard that the keyboard can pop out of, I thought about modifying the metal case but the hinges on the door are on the side I would need to modify.
that...is VERY ugly! lol... check this one oout, found it on some other thread...
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=18120&substring=wizard
Malik05 said:
that...is VERY ugly! lol... check this one oout, found it on some other thread...
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=18120&substring=wizard
Click to expand...
Click to collapse
That's a nice case but find it wierd that they neglected to show pictures of this with the keyboard open. Anyone seen reviews of this case?
You have a review right here on this forum:
http://forum.xda-developers.com/showthread.php?t=291434
I bought that case, same as the author of the post. And I have the same problem. The back part of the case stays in place if you're careful, but when you slide the keyboard open it pops out. It's a pitty, it's a really nice looking case.
Not sure if it'd fit the Dopod 838 as good though...
Related
PIEL FRAMA just came out with a beautiful case for the K-Jam
Linke here.
http://www.pielframa.com/qtek_9100.htm
Cheers
hrb
that is not cheap
and no where to put my credit cards
em.....not good
There's also been some question as to the strength of the leather section that holds the device when the strap is unbuttoned when using the keyboard.
Some have even mentioned that leather does tend to stretch over time which wouldn't be good in this case (no pun intended)
mywuzhuo said:
that is not cheap
and no where to put my credit cards
em.....not good
Click to expand...
Click to collapse
The wizard has got magnets in it to do the landscape/portrait screen switching. You probably don't want to put your credit cards anywhere near it.
Ineedtoys said:
mywuzhuo said:
that is not cheap
and no where to put my credit cards
em.....not good
Click to expand...
Click to collapse
The wizard has got magnets in it to do the landscape/portrait screen switching. You probably don't want to put your credit cards anywhere near it.
Click to expand...
Click to collapse
Not correct
Watch Mythbusters on Discovery
The magnetic strips in Bank and creditcards can take a lot more magnetic interference than those measly magnets can generate.
Hmm, don't like having to unbutton to use the keyboard
I've seen other flip (and book) cases where you don't have to unbutton to use the keyboard. If I wanted to do that, I'd keep my kayboard down my trousers.
avocaz said:
Not correct
Watch Mythbusters on Discovery
The magnetic strips in Bank and creditcards can take a lot more magnetic interference than those measly magnets can generate.
Click to expand...
Click to collapse
You might well be right (which is why I said probably), but I'm not convinced that's conclusive. From the write up I've read of the program, static exposure had no affect, but waving the card though the field did. That's kind of the pattern you'd get from constantly opening and closing the case. Neither did they take into account partial corruption on a card with an already weak strip (e.g. worn). They also didn't do any long term exposure tests - only for one second. So not conclusive in my book - though no doubt it looked good for television.
I do know that my cards used to be regularly corrupted by carrying a security access card with weak internal magnets in the same wallet. And I tend to give more credence to real life experience than "infotainment" TV.
Hmmm, you might be right , I'm definetly going to check out your points as they sound viable, thank you for another perspective
So, back on topic, has anyone used the Peil Frama case?
Ineedtoys said:
So, back on topic, has anyone used the Peil Frama case?
Click to expand...
Click to collapse
Right now I am reviewing the Piel Frama case for the Bostonpocketpc.com website...the strap is needed to keep the pda in it's case. Without the strap you can slide out the keyboard. I's getting a little used to, but the quality is perfect.
Read my review soon at www.bostonpocketpc.com
Johan
Krusell Case for XDA Mini S Pro/ qtek 9100
Thanks for all for the help in ulocking my new xda mini s.
Well guys i found this case to be best and secure, and yes you can put credit card in this case, and am using one @ the moment. i have 3 left to sell YIM me.
Somewhat unhappy with the Piel Frama Wizard case
Here's my comments written in an email sent to Piel Frama.
"Hi,
I just received the 3rd case I’ve ordered from you. I have nothing to complain about regarding the swift delivery as usual.
I have been very happy with my previous 2 well designed cases one for HP iPAQ 4150 the other for my QTEK S100 but I’m not so thrilled this time.
This time I purchased a case for the new QTEK 9100 Smartphone for €60. Although I realise the difficulty in designing a case for this Smartphone model I immediately noticed a major flaw.
I cannot smoothly close my case when I have my headset plugged in at the bottom. I have to force the button in place which leaves my lid at an untidy angle. I would have expected the same solution to this as was found on my last QTEK S100 case where you had a small half circle cut out in the latch that closes the case.
Also I would have preferred the magnet closing mechanism/button of the QTEK S100 case. But as you did not make room (the cut out) for my headset plug on the QTEK 9100 case I guess I have to be grateful for the old school button which means that I can at least force the case closed. I should also be grateful that I did not choose a more expensive material this time. It takes about 10 times as long to close this case compared to my old well designed S100 case, which I’m not very happy about at all as you can imagine.
I guess I’ll have to trim the case design myself (trim the hole for the headset plug which is somewhat askew as well as cutting out a half circle in the closing latch/leather band so that I can close the damn thing, excuse my language) and possibly ruining the case in the process but there’s nothing else to do as I cannot live without headset for my phone.
Unfortunately I was not able to find an end user review in English of this particular Piel Frama case before I ordered (I like to keep informed of what I’m spending my cash on) and still can’t. I’m sure that the first user review must come down hard on this design failure which would have been easily solved and which has been solved before.
I will be better informed next time I order. And I hope you make the necessary design changes to the QTEK 9100 before any end user reviews show up.
Sincerely,"
In addition to what I have said above I should mention that I think I will attach some velcro to the back of my QTEK 9100 (a pity to have to leave glue residue on the device) and the inside of my Piel Frama case so that I don't risk it falling out when using the keyboard. The fit of my case is not so snug as has been implied.
I'll make sure to post any reply I get from Piel Frama.
haz4u - you say the Krusell cases you have fit credit cards - I tried this in teh shop and teh slot is too narrow - have you actually tried this yourself - you may find the slot is just too small...
Re: Somewhat unhappy with the Piel Frama Wizard case
ash29 said:
...I think I will attach some velcro to the back of my QTEK 9100 (a pity to have to leave glue residue on the device)...
Click to expand...
Click to collapse
Dont worry about glue residue, use windex and it will rub right off.
btw windex is the best to use for sticky things, for example gum in carpet(or hair), sticker glue or tint glue left on windows... whatever.. you get the point.
Re: Krusell Case for XDA Mini S Pro/ qtek 9100
haz4u said:
Thanks for all for the help in ulocking my new xda mini s.
Well guys i found this case to be best and secure, and yes you can put credit card in this case, and am using one @ the moment. i have 3 left to sell YIM me.
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=38213&highlight=
Re: Krusell Case for XDA Mini S Pro/ qtek 9100
haz4u said:
haz4u said:
i have 3 left to sell YIM me.
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=38213&highlight=
Click to expand...
Click to collapse
As that thread says, they're cheaper elsewhere. Shame you can't use the keyboard without taking it out of the case.
van_mierlo said:
Right now I am reviewing the Piel Frama case for the Bostonpocketpc.com website... Read my review soon at www.bostonpocketpc.com
Click to expand...
Click to collapse
Did the review get posted?
theres this piel frama case and another company's case that hold the wizard like that from the bottom and allow you to use the keyboard. But i have yet to see an image that shows exactly how its holding on to it. If anyone has used one or seen one, can you please explain to me how its holding on to the device.
fone_fanatic said:
theres this piel frama case and another company's case that hold the wizard like that from the bottom and allow you to use the keyboard. But i have yet to see an image that shows exactly how its holding on to it. If anyone has used one or seen one, can you please explain to me how its holding on to the device.
Click to expand...
Click to collapse
Piel Frama claim it uses the tension of the leather of the sides, but in practice I'd suggest the answer is nothing once the strap is undone. With the rounded "hull" shaped case and profile of the Wizard, anyone can see that sideways pressure would force the device out, not in! And, of course, leather stretches over time... It was suggested to Piel Frama that the ideal way would be to use a retaining rod to go into the stylus holder, but looks like they haven't acted on that. So I can't see how any of Piel Frama's claims work in practice. Hence my question about the "promised" review above. Other cases use a strip of clear plastic over the keyboard to hold everything in place.
what would be a good design is a case that replaces the battery cover. The battery cover would be part of the ase and leave the bottom exposed so you can access the thing to take the battery cover off... i think that would hold well. along with the tension ofcouse... maybe if i get my hands on one i'll retrofit the battery cover/door into the case.
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
I have a krussel case for my nokia 6620. I thought another krussel would not be a bad choice. Although if anybody has a wonderful case they can suggest that is great.
Basically i want a case that is always on, since i can drop the unit when its not in the case that was included.
I have the PDAir Aluminium one, and think it's great. I'm very rough with my electronic toys, since they are "tools" for me, and a good tool has to stand me Also bought some pretty leather case (don't remember the name), because I thought it would be a bit smaller than the PDAir, but it wasn't, and you don't see the screen with those, so I'm back to PDAir. Looking at all the scratches it already has, it seems it does it's job well...
Re: Opinions on this wizard case? Seems to fit great and pro
xboxhaxorz said:
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
I have a krussel case for my nokia 6620. I thought another krussel would not be a bad choice. Although if anybody has a wonderful case they can suggest that is great.
Basically i want a case that is always on, since i can drop the unit when its not in the case that was included.
Click to expand...
Click to collapse
Is it possible to extend the keyboard without removing the phone from the case?
:?:
Yup I got the solid aluminium for travel and running around and the Krussel Cabriolet is on order for evening out or light use.
Cy
I think Krussel is the best. The prices are another story, this is about 50$.
http://cgi.ebay.com/BLK-PIEL-FRAMA-...3QQihZ005QQcategoryZ48673QQrdZ1QQcmdZViewItem
does the cabriolet from krusell protect the screen with some type of plastic over it? or does it just expose the screen?
this is the one im referring to
http://cgi.ebay.com/Krusell-Leather...QQihZ008QQcategoryZ108604QQrdZ1QQcmdZViewItem
That case doesn't protect the screen at all
Is it just me, or are the Monaco and PDAir cases identical (including the same pictures!)??
Monaco vs PDAir
More importantly, does anyone see a problem with one of these Case & Car charger combos on ebay?
has anyone ever got/seen one of these before?
http://cgi.ebay.co.uk/Black-Alumini...0QQihZ005QQcategoryZ48673QQrdZ1QQcmdZViewItem
looks absolutly fantastic, and lets you use the keyboard too.
Cases
Hello there. I have the silver aluminum case. I really liked the case after I got use to it. The only problem, my phone would freeze. Lock up totally. Only way out was to hard reset the phone. I know this sounds rediculous, but I've ruled out everything else. Ever since I stopped using the case my phone hasn't needed even a soft reset.
Currently I am using this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230007898731
But I just heard about this on XDA's site:
http://cgi.ebay.com/Cingular-8125-V...ryZ48673QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Does anyone know where to get the original case that came with my touch pro 2? The leather type one with the magnetic clasp.
I have lost mine and would like the same one.
The closest I can find in this but its material with a Velcro fastener.
http://www.handtec.co.uk/product.php?xProd=1800
If not are there any good leather cases out there that fit well and don’t damage the phone? I heave read some bad reviews of quite a few.
e.g.
http://www.mobilefun.co.uk/capdase-...tc-touch-pro-2-p22654.htm?referer=FR_PROD-PR1
http://www.play.com/Mobiles/Mobile/...it-Flex-Case-For-HTC-Touch-Pro-2/Product.html
EDIT: In fact does anyone have one they are not using and would like to sell?
Dexter_Morgan said:
Does anyone know where to get the original case that came with my touch pro 2? The leather type one with the magnetic clasp.
I have lost mine and would like the same one.
The closest I can find in this but its material with a Velcro fastener.
http://www.handtec.co.uk/product.php?xProd=1800
If not are there any good leather cases out there that fit well and don’t damage the phone? I heave read some bad reviews of quite a few.
e.g.
http://www.mobilefun.co.uk/capdase-...tc-touch-pro-2-p22654.htm?referer=FR_PROD-PR1
http://www.play.com/Mobiles/Mobile/...it-Flex-Case-For-HTC-Touch-Pro-2/Product.html
EDIT: In fact does anyone have one they are not using and would like to sell?
Click to expand...
Click to collapse
look on ebay. not everyone likes that pouch. you can probably get it for like 5-10 bucks
Sure, I'll sell you mine, just send me a quick private message to exchange info
Im reading here about many cqses but I just cant find the best. I need a case that lets every port open, looks nice , has multyangles and that it doesnt cost a lot. I need it as soon as posible becuse my tablet is hlme and its really hard to hold it for 3 hours in my hands Thank you.
maxmen123 said:
Im reading here about many cqses but I just cant find the best. I need a case that lets every port open, looks nice , has multyangles and that it doesnt cost a lot. I need it as soon as posible becuse my tablet is hlme and its really hard to hold it for 3 hours in my hands Thank you.
Click to expand...
Click to collapse
Still wanting on a general consensus as well...I guess the "official case isn't getting good reviews...
Thank you all on your suggestions -.-. Anyway I think I will go fora microfibre case from amazon.
Here's a nice leather one for $19.95
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110709890057&hlp=false
IMO - Check out the rooCASE on Amazon if you want a multi-angle style. From what I can tell, it is the "Best" in terms of quality. There are a few other multi-angle cases out there such as what you find on eBay but they do not appear to be made as well. JMO but the ACase for example just looks really cheap in comparison.
I've ordered the roo case as well but it's taking foooooooorever to get here.
I think you might like this one. It has a lot of space, and it can actually detach if you don't want to hold on to the whole case while using it. This company gave me a free stylus since I ordered one of their cases. I love the black but if you want another color, then I think they have a brown too.
Hope this helps.
http://www.amazon.com/Asus-Rotating...?s=electronics&ie=UTF8&qid=1310056761&sr=1-20
Gigabitme said:
I think you might like this one. It has a lot of space, and it can actually detach if you don't want to hold on to the whole case while using it. This company gave me a free stylus since I ordered one of their cases. I love the black but if you want another color, then I think they have a brown too.
Hope this helps.
How do you like the Amazon case you linked to? I have been considering that exact one. What is your opinion? How sturdy is it? Is the rotary/detach option really useful? Debating between this an a standard leather case because seems more durable/protective but doesn't offer rotary feature or detaching case...
Thanks.
Click to expand...
Click to collapse
Gigabitme said:
I think you might like this one.
Click to expand...
Click to collapse
Thanks for that recommendation. Looks like it kinda gives you a tablet sleeve too, built in.
I don't use portrait mode very much, but the ability to detach is a huge plus. Is it possible to fold the flap all the way back, so you have the case still attached, but use the tablet as a handheld?
From the picture, it looks like it attaches to the case via a button...is that secure? I've seen others that use two velcro disks...those seem more secure.
I just purchased that one last night. I'll come back and share my thoughts once I receive it around early next week.
Edit: I got the brown one
I find the smart cover case of my iPad 2 is ideal for typing in "landscape keyboard" mode. I haven't found any cases on eBay etc that do this except some really bulky/fugly ones. Has anyone found anything elegant/thin along the lines of the iPad 2 smart cover yet? I realize the GT7.7 doesn't have the logic to turn off when the cover is closed, I can live without that!
The original Samsung OEM case/cover looks very nice but doesn't seem to stand on its own in landscape keyboard mode
mickliq said:
I find the smart cover case of my iPad 2 is ideal for typing in "landscape keyboard" mode. I haven't found any cases on eBay etc that do this except some really bulky/fugly ones. Has anyone found anything elegant/thin along the lines of the iPad 2 smart cover yet? I realize the GT7.7 doesn't have the logic to turn off when the cover is closed, I can live without that!
The original Samsung OEM case/cover looks very nice but doesn't seem to stand on its own in landscape keyboard mode
Click to expand...
Click to collapse
As long as the surface is not overly smooth, the Samsung Original Book Cover case does stand in landscape (thanks to rubber strips that adds friction). See pics. May not *look* especially stable, but it does seem to hold out nicely.
Ironically, I would like to see a case that allows my tab to stand in portrait mode, since I'm more likely to read that way. Never seen one before.
I have a case similar to the official iPad1 case. Very slim and snug fit. Doesn't add much to the size of the device, keeping the original slimness. Its faux leather on the outside and suede cloth inside. It has the same standing mechanism as the iPad1 case too. Comes in a few colours, I got the brown one.
I've been looking for exactly this type of case and was amazed they are made. I believe I can post images now and so I'll put some up later.
mickliq said:
I find the smart cover case of my iPad 2 is ideal for typing in "landscape keyboard" mode. I haven't found any cases on eBay etc that do this except some really bulky/fugly ones. Has anyone found anything elegant/thin along the lines of the iPad 2 smart cover yet? I realize the GT7.7 doesn't have the logic to turn off when the cover is closed, I can live without that!
The original Samsung OEM case/cover looks very nice but doesn't seem to stand on its own in landscape keyboard mode
Click to expand...
Click to collapse
I ordered from tmall.com through a chinese freind, just enter P6800 in search field, but I am not sure they will ship outside china?
when you find something, paste the URL to google translate
reiconol said:
I have a case similar to the official iPad1 case. Very slim and snug fit. Doesn't add much to the size of the device, keeping the original slimness. Its faux leather on the outside and suede cloth inside. It has the same standing mechanism as the iPad1 case too. Comes in a few colours, I got the brown one.
I've been looking for exactly this type of case and was amazed they are made. I believe I can post images now and so I'll put some up later.
Click to expand...
Click to collapse
I believe you talking about this one, i am using right now, size is nice, protection is perfect!
i am going to order this one as well, it looks nice also.
cyuet said:
i am going to order this one as well, it looks nice also.
Click to expand...
Click to collapse
A similar one popped up on eBay last night for $25. Seller is in HK of course. What site did you find this on?
Tmall.com taobao.com
chinese webiste
that one cost RMB120
I found it at http://www.minihotsale.com/rock-sam...blet-light-cool-folio-leather-case_p1435.html
$35 shipped, not terrible. I like that it doesn't intrude on the bezel the way some of the other folios do.
Thanks cyuet for pointing me in the right direction! Will advise once received.
looks good
cyuet said:
I believe you talking about this one, i am using right now, size is nice, protection is perfect!
Click to expand...
Click to collapse
Thats the one. I personally prefer cases that give all round protection and this case does that. I find cases that only grip the corners can come loose over time, and badly made ones have terrible tolerances and may not even adequetly hold the device.
Thanks
mickliq said:
I found it at minihotsale.com/rock-samsung-p6800-galaxy-tab-77-tablet-light-cool-folio-leather-case_p1435.html
$35 shipped, not terrible. I like that it doesn't intrude on the bezel the way some of the other folios do.
Thanks cyuet for pointing me in the right direction! Will advise once received.
Click to expand...
Click to collapse
Cool... just ordered one... Thanks!
I also think that a case like the smart cover for the ipad2 is ideal for the tab 7.7. I have seen those for the 10.1 and 8.9 on ebay, and I am pretty sure they will pop up for the 7.7 soon.
Nothing from Zenus or SGP yet?
cyuet said:
i am going to order this one as well, it looks nice also.
Click to expand...
Click to collapse
I got it today, 128 RMB + shipment from taobao.com , the quality is very nice
UK based case for £8.99
I just received this case i bought from ebay for the bargain price of £8.99 in the UK and delivered from the UK too.
Very pleased with it! I've tried the official case but this is much better. It even has magnets on the flap to stop it flapping open when carrying.
http://www.ebay.co.uk/itm/110819465323
i am currently using following one,quality really good with nice free screen protector,you will love it.
http://www.ebay.co.uk/itm/150754858...d=m570.l2736&_nkw=+150754858296&_fvi=1&_rdc=1
hisuperman said:
i am currently using following one,quality really good with nice free screen protector,you will love it.
http://www.ebay.co.uk/itm/150754858...d=m570.l2736&_nkw=+150754858296&_fvi=1&_rdc=1
Click to expand...
Click to collapse
just as mine i love it
hisuperman said:
i am currently using following one,quality really good with nice free screen protector,you will love it.
http://www.ebay.co.uk/itm/150754858...d=m570.l2736&_nkw=+150754858296&_fvi=1&_rdc=1
Click to expand...
Click to collapse
That's basically exactly the same as the one I posted above except my link is cheaper and located in the UK (minus the screen protector but they are pence anyway)
The one I ordered also has better protection at the bottom
Case from eBay
I snagged this one as it closely resembles the one I really like for my GTab 7+. Will post up pictures when I get it.