WM2005 / tips&tricks (HTC S310) - HTC Oxygen

Some tips may "old" and well known (I know )
Display IMEI: *#06#
Keylock: LongPress red key
Start a call with your voice: LongPress volume down key (only works when device is not locked + configuration need for contacts)
I think there are a lot of other tricks? Who knows them?
e.g.
Disconnect from GPRS
Press and hold the "Home" key for 2 seconds, then select "Disconnect GPRS". This will stop the GPRS connection. --> This worked on my old i-hate SP3i with WM2003. But how to do this with WM2005. Is the only way the Comm application?
Mute
Mute incomming calls. (e.g. if I have no time to answer the call)
thx, hfrmobile

Related

Wired remote W100 + HTC audio manager

Hi,
I've got a problem with my wired remote (w100) in combination with HTC audio manager. When I want to skip a song using the wired remote it unlocks my phone, resulting in pressing several buttons. When I use the same remote with HTC audio manager with the Kaiser (using DSC 1.5 rom) this problem never occures and the phone keeps locked. Could someone please help me with this problem?
Me Too
I have the same problem. Whenever I use my wired remote I have to press the power button on my phone to turn of the screen. S2U2 won't even stay above the audio manager. Any help would be appreciated.
I have a HTC P3600 (Trinity) with WM5, and have just bought the W100 wired remote. I use PointUI Home ( http://www.pointui.com/Home.aspx ) which has a built-in screen lock.
But when I used the remote (play/pause, skip song and so on) together with Windows Media Player it would make WMP come into the foreground and stay there, so that the buttons could be pressed. I tried to install S2U2, but experienced the same problem.
Then I found out, that if I use the default device lock in WM5, I can still use the remote without bringing WMP into the foreground.
So I installed Matt Armstrong's DeviceLock ( http://forum.xda-developers.com/showthread.php?t=261277 ). It is a small utility that, when executed, puts on the default WM5 device lock. I assigned DeviceLock to a hardware button and ... voila!
Now I can start a song in WMP, activate the default WM5 device lock by pressing the hardware button to which I assigned DeviceLock, and use the remote. It will still bring WMP into the foreground BUT the default WM5 device lock must be unlocked before I can press any buttons on the screen.
I hope this helps you.
PS: I also assigned the DeviceLock to the lock icon in PointUI Home so I can start it from here. Let me know if you need help to do this.
You should only install S2U2 and enable option "Lock when device wakes on" and set option "Power off in" to 5 sec. All functionality of hands free RC W100 preserved! Screen of your PDA will be turned off and buttons will be locked.

How to Change Key Lock from Holding Down End Key to Camera Button

Ok, so loving my HTC S740 after changing from Qtek 8500. I know to initiate keylock you have to hold down the End Key for 2 seconds, but I am used to just closing my Qtek 8500 after a call to lock it. I also know you can activate auto keylock, but I need to keep my keys open sometimes. I would like to be able to just short press the Camera button to Keylock the phone. I have got as far as remapping the Camera button by changing the shortcut Short_Camera.lnk. Tried it by renaming Internet Explorer shorcut and it works! So far so good. But what shortcut to use or how to setup a shortcut for keyLock to remap to Short_Camera.lnk.
I know this sounds really petty, but can't wait and hold the End Key for 2 seconds every time!
Any help appreciated.
I don't know if it's possible by clean way without installing anything, but I have done this by assigning one harware button to 'turn off display' in AE Button Plus (which also locks keypad)
btw, I really like behaviour of some touchscreen htc devices where is device switched to standby by upper hardware button, and no other button can wake up device. It would be great to set up my S740 this way - anyone know if it is possilbe somehow?

[Q] How to set the action for the button on the BT headset

Hi,
i connected a bt headset to my S3, i has one button. When i press the button the phone makes a redial of the last no. on the list. How do i change the action of the button so that it starts s-voice for example.
thanks a lot
syd...

Can't receive calls, home button not working, can't lock.

My phone froze on me and I put out the battery but I noticed that :
1. I cannot receive calls. I can make calls, but when anyone calls me, it will ring twice on their end and then go to voice mail. My phone does not react at all.
2. My phone will not use the security grid. It will not enable either by widget or by going to the phones menu > security and enabling it. You can enable it, power phone off and back on and it goes right to the desktop. No lock screen period.
3. The home and search buttons on the bottom of the phone do not function. They vibrate like they are working but will they will not do anything.
4. And finally, when doing a long press on the power button, the airplane mode and other options do not appear. The only option available is the "Power Off" button.
Please, if anyone has experienced this or has an idea on how to fix this issue or what caused it, please let me know.

Intercepting the headset button press

I have Plantronics Backbeat Pro 2 bluetooth headset, it has few buttons:
play/pause
prev track
next track
button with few functions: single press - call/end call, double press - call last number, long press - voice search
Is it possible and how is it possible to intercept in code various presses of the last button described?
Intercepting MEDIA_BUTTON intents works only for first three buttons. onKeyDown also doesn't work.
I read that the headset communicates with the phone via AT commands. The second question is: Is it possible and how is it possible to intercept this commands?
Target phone is: Xiaomi Redmi Note 4X, rooted.
I will be glad of any help.

Categories

Resources