I am trying to keep the internet connection open (while some data is transferred) I have set up a dummy email account which sends & receives every 15 mins. This opens the connection but closes before the data is finished.
Is there a registry hack to keep the gprs open for say 5 mins.
Cheers
SteveW
lobster
I have found and tried :
HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\T-Mobile Internet\AlwaysOn = 1
When I try to set the value to 1 i get an error saying error setting registry information.
Cheers
SteveW
if you follow the app unlock procedure in this forum you will be able to edit the registry. registry keys are locked by default
rgds
GPRS setting
I have unlocked the device
I have set the following :
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\Virgin GPRS]
"AlwaysOn"=dword:00000001
"ConnectionGUID"="{1BDFAB9A-77AA-1EF0-BE55-D1132E79D273}"
"DestId"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"Enabled"=dword:00000001
"EntryType"=dword:00000002
"RequirePw"=dword:00000000
"Secure"=dword:00000000
"SecureLevel"=dword:00000000
but the connection does not remain open
any ideas?
Unlocking phone
I meant what would the cost be for the unlocking people to write change the software.....
Any contact details
Cheers
STeveW
Related
Does anyone have try this ArcsoftMMS MMS for magneto BY NCRUZ ON XDA-DEV?
1. Download AMmsC_XDAII_WM2k5 here
http://tofclok.free.fr/WM2005/AMmsC_XDAII_WM2k5.rar
2. soft reset my device
3. copy .dll to windows folder
4. install cab file
5. soft reset again
6. at this step I look in inbox --> no MMS)
7. go to menu > new account
8. step 1: set email to [email protected]
9. step 2: check the connection(I skip it)
10. step 3: name e ; user e ; password e
11. step 4: change to MMS account
12. step 5: INcoming mail ??? ; outgoing mail ??? ; domain ???
13. and then I check my inbox there is still no MMS account
14. Try to send and receive MMS & please tell me what the result... :?: :?:
for me:
Send MMS:
"Unable to send your message(s). Your Message(s) will remain in the outbox"
Receive MMS :
- Bubble Receiving MMS header in the Inbox appear but when i download MMS....
"Unable to Receive your message(s). Your Message(s) will remain in the inbox"
There is nothing wrong with my MMS setting but :twisted: :twisted: :evil: :twisted:
I have the same problem
the 1st time i setup a new mms account was a failure too, so i created another one. this time it worked & i have two mms accounts?
anyway, i did a clean install of 1.60c & followed the steps you mentioned (except 12. step 5, i placed "e" not sure if it matters at all?), mms account created the 1st time! i tried to send to my own cell number & received/download alright.
btw, i'm in indonesia too & using satelindo matrix. just for info if it would be of any help.
cheers!
rhmartin said:
the 1st time i setup a new mms account was a failure too, so i created another one. this time it worked & i have two mms accounts?
anyway, i did a clean install of 1.60c & followed the steps you mentioned (except 12. step 5, i placed "e" not sure if it matters at all?), mms account created the 1st time! i tried to send to my own cell number & received/download alright.
btw, i'm in indonesia too & using satelindo matrix. just for info if it would be of any help.
cheers!
Click to expand...
Click to collapse
well i will try with my Satelindo Matrix ASAP... i hope it works... :roll:
audio
I got the ArcSoft MMS Composer 3.0.0.25 to work in principal. However, it appears that the audio objects are not properly imbedded. Everything seems OK until the message is really sent. After sending, when the message is moved to the "Sent Items" folder, the audio object still appears under objects, but there is no sound when I play the entire message. Message received do not show any audio objects under objects, but the tex field includes a string <<sound.wav>> if the name of the audio object was sound.wav? Any idea?
help
Will somebody please explain to me...
I can make the MMS account and that but nothing is sent or received.
Please
Be sure to configure the server correctly.
Menu -> MMS Configuration ->Servers
You should get the data from your provider.
For my provider A1 in Austria I use
Server name: A1.net
Gateway: 194.48.124.71
Port number: 9201
Server address: http://mmsc.a1.net
Connect via: My ISP
Sending size limitations: 250K
WAP Version: WAP 1.2
Thanks!!
amazing!
thanks a lot. I just test sending myself a message and it works!!
But... (damn, why?)
I sent myself a message with a picture and the picture didnt came with the message, I just see a blank message and nothing more.
Did you receive this same thing?
Hello Everyone!
Firstly I would like to say thank you for the amazing input you put into this site - I have gone *very* far on the path to learning about my PPC 6800 just from reading past posts.
Problem
When trying to use data services on a Sprint Mogul configured for Alltel - Dialing #777 results in a "Cannot connect for unknown reason" message.
Voice and Text works fine.
Current Setup
PPC 6800 - SPC Reset to 000000 via QPST
oliPro 2.4
Radio 3 42 50
DCD 3 2 6
Alltel Carrier Cab 20080824 (I simply double clicked to install this right?)
PRL: 30031 and 40036 tried
ALWAYS ROAMING (I'm never in an Alltel Area)
Windows Connections settings: Alltel Wireless - #777 - login: [email protected] pass: alltel domain: empty
My Flash Steps
1) hard reset
2) Installed olipro 2.4 (and even tried with no2chem 2 47) via RUU
3) Flashed alltel Stock 3.35.671.9 with Radio via RUU
4) Let customizations run
Data at this point does not work but has (last week!!)
5) install radio 3 42 50 via flash
6) install dcd 3 2 6 via ruu
7) let customizations run
8) double clicked on Alltel carrier 20080824 and installed to device
data says same problem
I've tried a *228 Option 2 (update roam) and Option 3 (activate). No help.
I'm stuck
EPST Settings
Security:
HDR AN: [email protected]
HDR AN pass: my hex esn in all caps
PPP user id: [email protected]
PPP pass: alltel
MIP Default:
nai: [email protected]
mn ha: 101
mn aaa: 3E8
reverse tunnel: enable
home address: 0.0.0.0
primary address: 0.0.0.0
secondary address: 0.0.0.0
ha shared: rzU4LCHIJp+Efdtf (it worked last week!?)
aaa shared: alltel
dmu public key: 0
mn authentication: 0
MIP
mip mode: mobile ip preferred
mobile node ha: disable
send reg retry: disable
dormant handoff: ena
QPST Settings
By putting my phone in DIAG mode and running QPST I have the following settings
DATA
MDR Mode: SVC opt 33 Prefd
Service option: Pre 707
Data qnc - unchecked
data scrm - enabled
Mobile IP
Behavior : simple only
mn auth calculation: unchecked
My Questions
1) am I flashing this correctly?
2) Could someone please verify what my DATA and M.IP settings should be in my QPST section?
3) does my HA shared key in EPST have anything to do with this?
Thanks for any guidance or help in getting me setup - I'm hoping that by making stating all my settings nice and clear we can help others that search in solving their problems as well!
ShaneOMak said:
Hello Everyone!
Firstly I would like to say thank you for the amazing input you put into this site - I have gone *very* far on the path to learning about my PPC 6800 just from reading past posts.
Problem
When trying to use data services on a Sprint Mogul configured for Alltel - Dialing #777 results in a "Cannot connect for unknown reason" message.
Voice and Text works fine.
Current Setup
PPC 6800 - SPC Reset to 000000 via QPST
oliPro 2.4
Radio 3 42 50
DCD 3 2 6
Alltel Carrier Cab 20080824 (I simply double clicked to install this right?)
PRL: 30031 and 40036 tried
ALWAYS ROAMING (I'm never in an Alltel Area)
Windows Connections settings: Alltel Wireless - #777 - login: [email protected] pass: alltel domain: empty
My Flash Steps
1) hard reset
2) Installed olipro 2.4 (and even tried with no2chem 2 47) via RUU
3) Flashed alltel Stock 3.35.671.9 with Radio via RUU
4) Let customizations run
Data at this point does not work but has (last week!!)
5) install radio 3 42 50 via flash
6) install dcd 3 2 6 via ruu
7) let customizations run
8) double clicked on Alltel carrier 20080824 and installed to device
data says same problem
I've tried a *228 Option 2 (update roam) and Option 3 (activate). No help.
I'm stuck
EPST Settings
Security:
HDR AN: [email protected]
HDR AN pass: my hex esn in all caps
PPP user id: [email protected]
PPP pass: alltel
MIP Default:
nai: [email protected]
mn ha: 101
mn aaa: 3E8
reverse tunnel: enable
home address: 0.0.0.0
primary address: 0.0.0.0
secondary address: 0.0.0.0
ha shared: rzU4LCHIJp+Efdtf (it worked last week!?)
aaa shared: alltel
dmu public key: 0
mn authentication: 0
MIP
mip mode: mobile ip preferred
mobile node ha: disable
send reg retry: disable
dormant handoff: ena
QPST Settings
By putting my phone in DIAG mode and running QPST I have the following settings
DATA
MDR Mode: SVC opt 33 Prefd
Service option: Pre 707
Data qnc - unchecked
data scrm - enabled
Mobile IP
Behavior : simple only
mn auth calculation: unchecked
My Questions
1) am I flashing this correctly?
2) Could someone please verify what my DATA and M.IP settings should be in my QPST section?
3) does my HA shared key in EPST have anything to do with this?
Thanks for any guidance or help in getting me setup - I'm hoping that by making stating all my settings nice and clear we can help others that search in solving their problems as well!
Click to expand...
Click to collapse
DMU Key Reset. Either activate an old phone... wait a bit... get it working... then re-activate the new one. Or... call them.... tell them your phone doesn't get data, and you just did a hard reset. They might be able to fix it for you while you are on the phone.
Case Closed!
I called alltel and asked them to look at at performing a DMU Reset - while looking at my account they realized a few glitches (why they did not catch it before I'm not sure) and made changes.
They included:
Updating my Service Class to Simple IP only
Double Checking my AAA Authentication log and realized that a billing issue was not connected (Damn, they should have left this alone )
Thanks for your help!!1
*case closed* !
Mark here.
Thanks in advance for any help offered.
Searched around here and elsewhere since last year & can't find a solution. (please don't copy whole message in reply)
Ideal solution either: 1. Able to store/save settings and password so it does not need to be entered every day (many times) or 2. Load certificate correctly.
I have a TMous HD2 running Energy ROM (Feb 2011 version)
Connects fine to home WiFi's without prompts. Also to about 10 others when traveling - no probs.
It does not connect easily to my work WiFi. I have worked out a method, but I need to re-enter settings and password many times a day. With high security p/w with various characters etc it's a real pain.
To do so, I have setup link to WLANSettings.exe on home screen. I use these settings: 1. Work (not internet), 2. WPA2/AES, 3. PEAP (not Smart card or cert). OK. Then asks for login, password (no domain needed). First time enter login etc it doesn't connect. Second time I've learned to hit OK again and after a few seconds it connects.
If I go though the 'normal' WiFi setup it asks for a Certificate. I enter the server for the cert, password as above and it will not find it. They gave me a cert file ('home grown' PEAP Authority certificate Thawte Premium Server CA) but it loads into Intermediate, not Personal and does not work. Apparently iPhone & iPad link to cert server and install it fine.
Tried:
1. I tried Odyssey (Odyssey Access Client for Windows MobileCE - Juniper Networks ). Helps, but not perfect, but it messes up my home connection. so uninstalled (updated ROM since then)
2. Tried programs to load cert. No go. (p12imprt, pfximprt; smartphoneaddcert). Various error messages - can't remember them - along the lines of not signed, not .pfx cert etc.
3. Exported cert. from PC's (WinXP) Firefox. Can't convert it to a .pfx to use the above.
Work does not support Win Mobile. So no support offered - though they've tried to help.
The settings for my mates Nokia which does work are:
PEAP and the fields are:
Personal certificate: not defined
Authority certificate: Thawte Premium Server CA User name in use: user defined User name: 'must leave blank'
Realm in use: user defined
Realm: 'must leave blank'
Allow PEAPv0: Yes
Allow PEAPv1: Yes
Allow PEAPv2: No
Under MSCHAPv2 within PEAP settings are
User name : your 'username'
Prompt password: no
Password: your 'password'
Have tried following also (rough notes):
HKEY_LOCAL_MACHINE\Comm\EAP\Extension\25.
"InvokePasswordDialog" and "InvokeUserNameDialog" value 1, switch to 0. Works till restart.
go to commMan/ menu/ settings set work & proxy or commMan/Conns/conns
changed to HKLM, gone to directory comm\EAP\extension\25. added a folder called validateservercert and added a key to this folder - DWORD. it asks me to edit the DWORD value - in value data i have added 00000000 and selected hexadecimal.
add the key [HKEY_LOCAL_MACHINE\Comm\EAP\Extension\25] and [HKEY_LOCAL_MACHINE\Comm\EAP\Extension\26]
Mmm... 'tis a difficult one.
>"Ideal solution either: 1. Able to store/save settings and password so it does not
>need to be entered every day (many times) or 2. Load certificate correctly."
Another alternative would be software to manage WiFi login - that saves passwords.
I tried Odyssey, but it messed up home connections. WiFi Monster does not do it.
Anything out there?
Mark
Hello. I have a question related to WAP enterprise on Android. Basically, my employer has detailed instructions on how to connect to the building wifi via BlackBerry or iphone but sadly not Android. I was wondering if there is a workaround or hack for this that would enable me to connect using either BB or iphone settings. I downloaded WiFi Advanced from the Market but I haven’t been able to figure out what to fill in what field ( I do see checkboxes for LEAP and WPA Enterprise mentioned below but no proxy field). Any tips using this app or another solution is appreciated! These are the settings I need to enter:
BlackBerry:
Setup Wifi Network: Office network name (appears as WPA Enterprise)
Select LEAP as security type
Enter username and password (which I have)
Connect to network
Manage connections , choose Enterprise Subtype as LEAP
Enter username and password (which I have)
Iphone:
Enter Wifi settings, tap Other
Enter network name, tap Security
Choose WPA Enterprise for security
Enter username and password (which I have)
Connect to network
Tap blue arrow next to network name and tap Auto under proxy
Enter proxy URL
So one uses LEAP and the other one asks me for a Proxy so I am not sure which one might work for my Samsung Galaxy S2 using Wifi Advanced app from the Market.
NOTE: I am able to create the network and it shows as connected but no internet access, its says WPA_EAP IEEE8021X below the name, but dont know how to take it from there in Wifi Advanced to complete the setup as per above .
Any help is appreciated!!!!!!
I have exactly the same problem. Any ideas?
erkan79 said:
I have exactly the same problem. Any ideas?
Click to expand...
Click to collapse
This thread is pretty old, but I don't see any reply to this problem so I thought to share solution that worked for me.
As per your description "Garoto1973" your network connection didn't establish. It failed while authenticating. You may find below steps useful.
I was able to connect to my companies PEAP network by using following configurations. Please note that I am using adb to modify wifi settings so your phone should be rooted.
1- Connect your phone to your PC.
2- Pull wpa_supplicant.conf file to your machine for editing:
adb pull /data/misc/wifi/wpa_supplicant.conf
3- Edit wpa_supplicant.conf file adding this configuration for your network:
network={
ssid="<YOUR_NETWORK_NAME>"
scan_ssid=1
proto=WPA
key_mgmt=IEEE8021X
pairwise=TKIP
group=TKIP
auth_alg=OPEN
eap=PEAP
identity="<DOMAIN\IDENTITY>"
password="<YOUR_PASSWORD>"
phase2="auth=MSCHAPV2"
eapol_flags=2
}
Note that "eapol_flags=2" is very important or connection fails for me with error "W/wpa_supplicant(27862): EAPOL: Failed to set WEP key to the driver."
4- Replace wpa_supplicant.conf on your mobile with the modified file:
adb push wpa_supplicant.conf /data/misc/wifi
5- Reassign user and group for wpa_supplicant file:
adb shell chown 1010 /data/misc/wifi/wpa_supplicant.conf
adb shell chgrp 1010 /data/misc/wifi/wpa_supplicant.conf
6- Restart wifi and it should connect
hello, not sure if it will help.
try to use aplication LEAP WIFI free from the market. With this app I am able to connect to my corporate network
Hello All,
I have been searching for a solution to the below mentioned issue all over the net since last one month and finally referred to this forum by my vpn service provider 'cyberghostvpn'.
I am enclosing my config file (test.ovpn.txt), log file(log.txt) & sample password file for 'auth-user-pass' (pass.txt).
Following are the highlighted points regarding this issue :
While the same config file is working fine on my linux machine on android the same is stopping at the prompt "Enter Auth Username :". After entering username the connection sequence continues but the prompt "Enter Auth Password :" never comes like linux.
Hence my analysis is that the openvpn binary is unable to pass my the username-passowrd combination to my vpn server in the console input mode and an auth-failure control message is received shortly later terminating the connection.
If I pass the username-passord combination through the password file as 'auth-user-pass pass.txt' then also the same thing happens (an auth-failure control message is received terminating the connection).
In linux both of these methods are working successfully in establishing the connection proving that there is nothing wrong with cyberghostvpn.
One important point is though on android the openvpn binary is unable to read the config from the .ovpn file, it runs when the options are given as command line arguments as shown below and the enclosed log file is generated in this method.
# openvpn --client --ca ca.crt --cert my_user_name.crt --key my_user_name.key --remote ch.openvpn.cyberghostvpn.com 9081 ..........--tun-mtu 1500 --fragment 1300 --mssfix > log.txt
Anyone who can either help me resolving this issue or refer it to some expert developer on openvpn will be very much appreciated.
Kind regards,
kingsukm