Hi everybody,
This is my first post here and first of all id like to say "THANKS FOLKS" for the great job you are doing here just for your passion!
Im writing for Italy and im about to get an "english" (from U.K.) genuine and not branded Htc Tytn so, dont worry, im not about to bother you with questions about italian dumped roms or stuff like that!
Tytn will be my first pda phone and my first "experience" with WM 5 so, before posting, i tried to read as much as i could just to avoid posting old questions, but i didnt find anything to make it bright: if id like to upgrade the rom, the extended rom, the radio rom of my tytn with a genuine htc rom, extended rom and radio rom without upgrading the bootloader, how can i do that?Is it possible?if yes, how?
I ask that coz first, i suppose my tytn will come with the 1.04 bootloader since its brand new, second coz id like to be able to just upgrade the radio rom without upgrading all the rest and third, coz im not really intersted in making it "super cid" or anything else since i wont mount any other immage than the htc ones...
I dont know if i said something wrong or already asked and, if yes, my apologies...if not, i really hope to get some answers...
Tnx everybody and see you next post...
Greeting, Jello
Jello79 said:
if id like to upgrade the rom, the extended rom, the radio rom of my tytn with a genuine htc rom, extended rom and radio rom without upgrading the bootloader, how can i do that?Is it possible?
Click to expand...
Click to collapse
Hi Jello79 and welcome to XDA-Dev, I see you've done your homework of reading and searching before asking, and no... your question has not been asked before, so we're not going to kick your ass yet (just kidding!)
If you extract a shipped ROM you will see there's a NBH file which contains the following ROM parts:
Bootloader: IPL.nb & SPL.nb
Splash Screens: MainSplash.nb & SubSplash.nb
Radio: GSM.nb
Extended rom: ExtROM.nb
WM5: OS.nb
This NBH file has a signature generated with a private HTC certificate, and if you change a single bit of it, the signature will not be valid, so the bootloader will not accept to upgrade the device showing an "invalid cert error (255)".
So the answer to your question is unfortunately "no", you are not able to flash other ROM parts without flashing the bootloader, because all existing NBH files contain a IPL & SPL on them.
Hope it is clear to you
Tnx pof, fast, detailed and bright...now i "just" have to decide what to do..do you have any suggestion?
I think it worths to update all the shipped rom to the newset one...even if it avoids me to upload only the radio rom...what do you think?
Last question:making my tytn a "super cid" one, would make the warranty void?
Tnx in advance,
Jello
Jello79 said:
Tnx pof, fast, detailed and bright...now i "just" have to decide what to do..do you have any suggestion?
I think it worths to update all the shipped rom to the newset one...even if it avoids me to upload only the radio rom...what do you think?
Click to expand...
Click to collapse
Sorry I can't answer that... depends on how you want to use the device and what do you expect out of it, and how happy are you to loose time changing roms, applying registry settings, installing cabs, etc... If you're a business user with no time and mod to play with it, I'd keep the shipped rom, otherwise I'd go on with upgrades.
Jello79 said:
Last question:making my tytn a "super cid" one, would make the warranty void?
Click to expand...
Click to collapse
I haven't read the warranty,... but I guess yes
Related
My T mobile branded Vario II fell off my lap yesterday (in its case) Theres not a scratch on it and its only 4months old. Later on i had loads of missed calls and then realised it wont ring or vibrate or play mp3's.
Im currently running one of HTC's Roms, SPL-1.09 is my bootloader and im not sure how to reflash with the original T-mobile rom before i head back to the shop to see about a replacement
I keep getting a invalid vendor id, and from reading posts on the forums i know i need to do something with the cid so i can flash back down to the original rom.But im getting confused between a super cid and a cid? as what ive found below just mentions cid and not super cid.
Is this the file i need? HTC_Hermes_SIM_CID_Unlock_v3a ? i just run the .bat file then install the orginal t mobile rom as normal?
What im basically asking is the above right to ahead with? as i just need some reassurance as if i cant blag one under warranty then ill have to use my insurance which as its my second claim in 6 months has a excess of £60
Yes i have looked on the forums for hours but cant see any info.
Thanks in advance should anyone help
EDIT well ive run the unlocker and supercid'd it but it still wont let me flash with the original t mobile rom?
ERROR:260 Update Error
im getting the above error?
Is all I will say is click on the mrvanx guide in my signature.
Gavin01 said:
My T mobile branded Vario II fell off my lap yesterday (in its case) Theres not a scratch on it and its only 4months old. Later on i had loads of missed calls and then realised it wont ring or vibrate or play mp3's.
Im currently running one of HTC's Roms, SPL-1.09 is my bootloader and im not sure how to reflash with the original T-mobile rom before i head back to the shop to see about a replacement
I keep getting a invalid vendor id, and from reading posts on the forums i know i need to do something with the cid so i can flash back down to the original rom.But im getting confused between a super cid and a cid? as what ive found below just mentions cid and not super cid.
Is this the file i need? HTC_Hermes_SIM_CID_Unlock_v3a ? i just run the .bat file then install the orginal t mobile rom as normal?
What im basically asking is the above right to ahead with? as i just need some reassurance as if i cant blag one under warranty then ill have to use my insurance which as its my second claim in 6 months has a excess of £60
Yes i have looked on the forums for hours but cant see any info.
Thanks in advance should anyone help
EDIT well ive run the unlocker and supercid'd it but it still wont let me flash with the original t mobile rom?
ERROR:260 Update Error
im getting the above error?
Click to expand...
Click to collapse
Hi!
if u have aRom in your device i think the link below gona helps
GOOD LUCK
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=26
thanks guys i will try the above. if not i think ill "loose" the phone
Hi Gavin01,
Good luck with the downgrade - I'd be interested to know how it goes. I also have a T-Mobile MDA Vario II, and so far I've put HardSPL 7 and Radio ROM 1.41 onto it. I'm just trying to decide which WM6 ROM I want to try out
Anyway, I have at the back of my mind that I don't really know how to downgrade it in the case of a warranty claim. The MrVanx guide to downgrading WM5 looks ok, but I'd love to know how to put the radio rom back (I guess this would just be the reverse of the upgrade), but then finally taking taking HardSPL off. In fact I'd vote for a guide on it - would write it myself but I have to confess I'm rather a newbie to the world of HTC upgrades....
Cheers,
sparky
I have the same problem
I´d like to downgrade to original softbank settings. But they only accept warranty issues if you have the original cid? , right?
So putting the old rom back on is not my problem, "un-super-cid" it is.
I need help please too
Hello,
please excuse, but i have a question and i will not open a new threat.
I use tytn. I have installed the Radio Version 1.40 and the Black 3.01 Rom. I have used HardSPL and when i go into the bootloader i have Herm200 IPL 1.04 and Herm200 SPL 2.10 OliPro. My question is: it is not possible to go back to wm5 with the installer RUU Hermes 1.18....-Qtek_Ger_Ship. Because in this installer is a Radio Rom. When i will use it, i lost my Radio and i have No GSM. The only way to go back is with MrVanx Hermes downgrade guide. Is this correctness ??
( This is what i think after using the help-function and the wiki )
When this is right, so Please Please, can a specialist please build a litte .exe-File so that i can make a downgrade to my mw5? Sorry, i am not idle, i am not able to to this. And please excuse my english. I will say say thank you very very much for your helping. With the best regards from Berlin say Christian
In the unfortunate event that you need to revert back to your carrier's official rom to send your device in for service or an exchange, with HardSPL installed on your device you will be unable to do this as technically it voids your warranty. Fortunately there is a solution to this.
the-equinoxe said:
You can flash the ROMs with the RUU in the ROM package, should you have trouble with upgrading, try Mun's RUU (thanks for the tip Boto).
So no need to downgrade before upgrade anymore.
But don't flash ROMs containing IPL/SPL. -(This means do NOT flash an official Rom)
Click to expand...
Click to collapse
There is one way to revert back to an Official Rom should you need to though.
In order to flash an Official Rom again, you will need to remove HardSPL because flashing an Official Rom with an IPL/SPL with the patched SPL already installed, you will find yourself in the possession of a very expensive paperweight.
To remove HardSPL, you will just need to follow these simple instructions:
1. Download SoftSPL by the-equinoxe.
2. Download the IPL/SPL based on your device and carrier(attached below)
3. Extract SoftSPL to its own folder and then extract the nk.nbf file from the correct IPL/SPL to the SoftSPL folder.
4. Run Start-sSPL.exe and follow the simple directions. It is almost fully automated(your screen will turn white during the flashing process and it will appear to have crashed. This is normal so just proceed like normal)
5. HardSPL should now be removed if everything worked properly. Depending on your device and Carrier, download the appropriate Rom for your device:
T-Mobile MDA Official WM5 Rom
AT&T 8125 Official WM5 Rom
Vodafone Qtek 9100 Official WM5 Rom
Orange SPV M3000 Official WM5 Rom
O2 XDA Mini S Official WM5 Rom
6. Flash the Rom you just downloaded. There you have it. You have successfully removed HardSPL and reverted back to your carrier's latest rom and restored the CID lock.
Please be aware, I take NO responsibility if someone were to use the files provided in this tutorial incorrectly and damage their phone.
USE AT YOUR OWN RISK!
Credits go to the-equinoxe for developing SoftSPL and making this possible.
Nice tutorial.
I have linked the Hard SPL thread to your topic.
the-equinoxe said:
Nice tutorial.
I have linked the Hard SPL thread to your topic.
Click to expand...
Click to collapse
Awesome. Thanks!
Hum... just a quick question:
I own a Qtek 9100 from Vodafone here in Portugal... if I would flash those G4 IPL/SPL, wouldn't that mess up my IPL/SPL country ID?
Also, it would make it impossible to flash an Vodafone PT official update (they never released one or I would flash it but anyway...), right?
Is there anyway of getting the IPL/SPL from another Wizard that hasn't been CID Unlocked and dump it so that I would give it to you, so that we can start a database of CID Locked G4 IPL/SPL's, just in case someone needs to send it back to factory for repairing?
Guess it was a lot of questions
dferreira said:
Hum... just a quick question:
I own a Qtek 9100 from Vodafone here in Portugal... if I would flash those G4 IPL/SPL, wouldn't that mess up my IPL/SPL country ID?
Also, it would make it impossible to flash an Vodafone PT official update (they never released one or I would flash it but anyway...), right?
Is there anyway of getting the IPL/SPL from another Wizard that hasn't been CID Unlocked and dump it so that I would give it to you, so that we can start a database of CID Locked G4 IPL/SPL's, just in case someone needs to send it back to factory for repairing?
Guess it was a lot of questions
Click to expand...
Click to collapse
Check this link and tell me if it would be what you need. If it is, I will dump the IPL/SPL and add it to the initial post.
http://s131209249.online.de/vodafone_software/index.htm
Yups !!!
Thumbs Up !
Must say a very important info and service to the G4 owners
Shud be voted for 'Sticky'
...
[edit] What about the IPL/SPL for the official O2 rom??
randomgoon said:
...
[edit] What about the IPL/SPL for the official O2 rom??
Click to expand...
Click to collapse
I will look into it and see if I can find it. If I am able to find it I post the IPL/SPL in an attached zip like the others and add a link to the official Rom as well.
EDIT:: Found it, sent you a private message. I need some personal information from you in order to download it.
Thanks.. I sent my imei + number to you.. Now I can finally revert back to the original rom and sell!
bill4676 said:
can any one help please i want to put in some custom sounds for text message notification how can i do it i have the files in arm format but cant seem to get them listed in text message notification
any help would be great cheers
3.3.00wwe
fariav4.0
Click to expand...
Click to collapse
This is the wrong thread for this kind of question. Please ask this question under Wizard Forum unless you have a question about how to remove HardSPL.
Thanks.
Worked wonders on my o2 xda mini s.. Thank you for your help! I'd donate, but I'm a poor student
randomgoon said:
Worked wonders on my o2 xda mini s.. Thank you for your help! I'd donate, but I'm a poor student
Click to expand...
Click to collapse
Oh don't worry about that. I don't have a paypal anyway. I simply do what I do for this forum because I cannot afford to donate either.
You want to repay the community? Stay an active member and just give feedback on the new things you try.
Restored my SPL using this tool. Outstanding job!
i have a qtek 9100 that i bought second hand here in canada. will the vodaphone rom and ipl/spl packages work, or do i need to use something else?
travolie said:
i have a qtek 9100 that i bought second hand here in canada. will the vodaphone rom and ipl/spl packages work, or do i need to use something else?
Click to expand...
Click to collapse
I'm not sure. I know the Vodafone pack is WWE(World Wide English) so as long as you speak English, you should be able to use it.
im getting an 8525 from att for 60 bux cuz my 8125 is a brick but not because of this.
anyway back to the subject this is really usefull and should be stickied
Thank you harvey! This has worked out excellent!
need orange 2.22
does anyone know where i can get SPL for Polish Orange SPL is 2.22.0001 i cant do nothing cause my phone freeze at splash screen i already flashed wizard love rom and nothing happened, still frozen so last chance is in original rom from polish orange...
kayzerrr said:
does anyone know where i can get SPL for Polish Orange SPL is 2.22.0001 i cant do nothing cause my phone freeze at splash screen i already flashed wizard love rom and nothing happened, still frozen so last chance is in original rom from polish orange...
Click to expand...
Click to collapse
Actually, you can use ANY G4 IPL/SPL pack, and then reflash to your original carriers ROM.
Just put it into bootloader, kill wcescomm.exe, and flash.
EDIT: Sorted
Thank you for this. I just bricked my Wizard and fixed it. This post was very helpful.
How can I downgrade the newSPL(3.50) to oldSPL(1.20) ?
jacoblu said:
How can I downgrade the newSPL(3.50) to oldSPL(1.20) ?
Click to expand...
Click to collapse
i already opened a thread about this and noone seems to be answering the question.. i am afraid my device is ruined already and most likely because of the new spl.. i am so upset.. the whole device is acting wierd, i even went back to ap3 and still having the same problems.. it seems to be the spl coz nothing else changed! i want to flash stock rom. any idea how to go back to normal???
Guess, all bros here prefer we have our device upgraded then otherwise.
I too encountered the bootloader loop after executing the AnthenaUpdater.
Best of all I cannot load AP4 and I cannot goto activesync mode.
Seeing the bootloader screen tell me there is hope, so next.
I flash AP3newspl by cmonex, http://htc-hackers.com/uploads/ap3newspl.zip
Not sure I re-flashed the AP3 rom, sorry, quite excited during the recovery process.
As soon as I get to see AP3, I continue instructions as prompted on screen until I have the
Activesync running. Once the sync is stable and established good connection with pc,
I immediately proceed and re-try flashing AnthenaUpdater.
It finally flashed the AP4 rom. The princess found the frog.
I hope my little experience may of help to you. Cheers.
I;ve also learn to leave the usb cable connected for a little longer to ensure all activities are completed.
hi, me too
I felt ap4.0 maybe is slow so i tried to go back to 7510(or 7501) original rom but stopped at loading..... scene
So i tried tried and flashed ap3.0 rom and t-mobile ...... but everytime rebooting device is starting as hardresetted.
Never come back to original rom never go to ap 4.0
so after rebooting ,as above posting, while activesync is active, I ran apupdater but the bootloader didn't come but hard restting_after scene so ap 3.0 or 7501 rom was starting....
desperatly, as soon as updater was finalized and before bootloader started, I pressed down volume_key+camera key +soft reset hole....
manually loading bootloader...
I succeeded in flashing ap 4.0
And felt good operating.
Everybody can experience this case .
This is from spl ver. I think.
^^
As far as you willingly go back to ap 4.0, your device will remain beatiful athena.
I think some explanations needed......
Is this my own world's case?
.......................................afraid.......
see the wiki
jacoblu said:
How can I downgrade the newSPL(3.50) to oldSPL(1.20) ?
Click to expand...
Click to collapse
This and other issues are in the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
Really everyone should read this and all the info available before you flash!
as you have found out, there is no way to revert to the old SPL yet!
I downgraded to AP3 Old SPL, It runs fine. However, I got the following error with other Roms downgrade:
"FOUND SPL V1.20
DOWNLOAD SPL BEFORE V3.03 IS NOT ALLOWED"
What does it mean?
It means, as has been said MANY times before, if you upgrade to AP4 you CANNOT downgrade to anything except the hacked AP3.
niceboyyy said:
I downgraded to AP3 Old SPL, It runs fine. However, I got the following error with other Roms downgrade:
"FOUND SPL V1.20
DOWNLOAD SPL BEFORE V3.03 IS NOT ALLOWED"
What does it mean?
Click to expand...
Click to collapse
I got the same message.
And first Scene after rebooting is crashed as like a gray darkness mess.
after ap 4.0 reupgrading, all worked fine.
lakeman said:
This and other issues are in the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena_AP4_FAQ
Really everyone should read this and all the info available before you flash!
as you have found out, there is no way to revert to the old SPL yet!
Click to expand...
Click to collapse
You mean that it can't revert to old SPL? but after flashing this newSPL(v3.50.OliNex),my original rom can't be flash back! Because I'm a chinese,I need the chinese language rom.
How can I downgrade to chinese WM6 rom?
Confucious said:
It means, as has been said MANY times before, if you upgrade to AP4 you CANNOT downgrade to anything except the hacked AP3.
Click to expand...
Click to collapse
Except the hacked AP3(http://htc-hackers.com/uploads/ap3newspl.zip),
have any other chinese wm6 rom for the new SPL?
jacoblu said:
Except the hacked AP3(http://htc-hackers.com/uploads/ap3newspl.zip),
have any other chinese wm6 rom for the new SPL?
Click to expand...
Click to collapse
What the heck is that you've linked to?
Why didn't you read before upgrading? It was made quite clear that this was a now ROM that required a new SPL and could not be downgraded. Olinex has since made a version of AP3 that you can downgrade to and in future a full downgrade path will be available. It is not available yet.
jacoblu said:
Except the hacked AP3(http://htc-hackers.com/uploads/ap3newspl.zip),
have any other chinese wm6 rom for the new SPL?
Click to expand...
Click to collapse
只能装他的ap3。。这个ap3能运行在new spl下
其实ap4比ap3好，只要把那个划屏的选项关了在横屏下就好使了，也不卡。。不用划屏不就行了。。。
cqwww said:
只能装他的ap3。。这个ap3能运行在new spl下
其实ap4比ap3好，只要把那个划屏的选项关了在横屏下就好使了，也不卡。。不用划屏不就行了。。。
Click to expand...
Click to collapse
Many from different country had tried their best to express their thought here in English too. Some may not write good English but they still show respect to members here.
I do not understand why you cannot or do not wish to exercise a little basic courtesy of sharing your thought in simple English.
My first language is not English.
pdajoy said:
Many from different country had tried their best to express their thought here in English too. Some may not write good English but they still show respect to members here.
I do not understand why you cannot or do not wish to exercise a little basic courtesy of sharing your thought in simple English.
My first language is not English.
Click to expand...
Click to collapse
install input method ~
Needing Downgrade - Waiting Patiently
First off - the AP4 is an excellent Rom - Great work! Thanks!!!! I was an early adaptor and unfortunately my headphone jack shorted out my internal speakers and now of course trying to reflash to the original HTC wm6 shipped rom so I can submit it to warranty, I found the dreaded spl-v3.50 not acceptable warning. Yes, we were forewarned about this (though I confess I missed it). So I URGE any of you who are still under warranty NOT TO UPGRADE to AP4 until Olipro benovolently provides us a true downgrade path to the factory roms or you are absolutely positive you don't want to make a waranty claim. If you are not under warranty - I highly recommend AP4. If you are under warranty I highly recommend staying with AP3 as you can downgrade AP3 to the original factory roms.
My two cents worth as I wait patiently for Olipros downgrade path to the original roms - and I will be donating handsomely for this...
hello
any progress from the dev team ? it is a great rom but for sale our athena it is best to downgrade and to instal a shipped rom...
Regards
alyn99 said:
unfortunately my headphone jack shorted out my internal speakers
Click to expand...
Click to collapse
are yiu sure this isn't just the problem that has affected just about every HTC phone and is easily fixed by poking either the headphone jack in and out a few times or wigling a matchstick/paperclipin the hole?
No need for a waranty claim!
Confucious said:
are yiu sure this isn't just the problem that has affected just about every HTC phone and is easily fixed by poking either the headphone jack in and out a few times or wigling a matchstick/paperclipin the hole?
No need for a waranty claim!
Click to expand...
Click to collapse
Not only from HTC, I encountered it with Atom and HP6828 device as well.
Poking to correct the contact may help but do not apply too much force.
The jack cannot be replaced individually, whole main board have to go,
as I learned from the service centre.
OK now before U start cursing me, please hear me out first.
I have a HTC TyTN in German, and I can make squad out of it cause I don't understand this language. (it was a gift btw)
Now I have gone trough the manuals and trough wiki but for a total beginner like my self a lot of this stuff is confusing. So here is my plead:
Can anyone put in a small manual how to convert this German speaking HTC TyTN in to nice and understandable English one
Now when I do the OK+POWER+Reset stuff this is what shows up on the screen:
HERM200
IPL 1.00
SPL 1.06
The Phone Info on the other side shows this mambo jumbo:
ROM-version: 1.18.257.2
ROM-datum: 07/22/06
Funkempfangerversion: 1.03.03.10 (told U is in German)
Protokoll-version: 32.34.7010.01H
ExtROM-version: 1.18.257.8003
Now keep in mind this is the only place that I have found that has this kind of info so go easy on me.
Thank U kindly for any given help!
re
You have to flash a new ROM. Maybe you find the original english one?
xep624 said:
You have to flash a new ROM. Maybe you find the original english one?
Click to expand...
Click to collapse
Well that much i know, but the exact procedure is a tough one.
That is why I was hoping that some more experienced user will help me out.
10x anyways.
D_NazGUL said:
Well that much i know, but the exact procedure is a tough one.
That is why I was hoping that some more experienced user will help me out.
10x anyways.
Click to expand...
Click to collapse
Have a look here: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
First of all you will want to Sim/CID unlock your phone.
That is here
http://forum.xda-developers.com/showthread.php?t=293665
Then flash HardSPL, to help make sure you dont brick your phone.
http://forum.xda-developers.com/showthread.php?t=296722
Now, you can flash yourself a custom rom, or a shipped rom.
List of shiped roms:
WM6: http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
A nice list of active cooked roms:
http://forum.xda-developers.com/showthread.php?t=403963
Out of the cooked roms I like CRC's the best, I would go for 11.2 if you need 100% stability, or 12.8 normal if you don't mind a faster but "beta" rom, not that I have ever found his roms to be buggy.
PDACornerPro.V19's is also popular (Would recommend going for "RBSN" if you chose his)
And MRH's are more "loaded" roms cooked off CRC's.
veyka said:
Have a look here: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
First of all you will want to Sim/CID unlock your phone.
That is here
http://forum.xda-developers.com/showthread.php?t=293665
Then flash HardSPL, to help make sure you dont brick your phone.
http://forum.xda-developers.com/showthread.php?t=296722
Now, you can flash yourself a custom rom, or a shipped rom.
List of shiped roms:
WM6: http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
A nice list of active cooked roms:
http://forum.xda-developers.com/showthread.php?t=403963
Out of the cooked roms I like CRC's the best, I would go for 11.2 if you need 100% stability, or 12.8 normal if you don't mind a faster but "beta" rom, not that I have ever found his roms to be buggy.
PDACornerPro.V19's is also popular (Would recommend going for "RBSN" if you chose his)
And MRH's are more "loaded" roms cooked off CRC's.
Click to expand...
Click to collapse
Well this is exactly what I was looking for.
Just one more thing: Tell me what would be the most appropriate ROM, cause I just wanna change to English language, I'm not looking for anything extra!
10x mate!
veyka said:
Have a look here: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
First of all you will want to Sim/CID unlock your phone.
That is here
http://forum.xda-developers.com/showthread.php?t=293665
Then flash HardSPL, to help make sure you dont brick your phone.
http://forum.xda-developers.com/showthread.php?t=296722
Now, you can flash yourself a custom rom, or a shipped rom.
List of shiped roms:
WM6: http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
A nice list of active cooked roms:
http://forum.xda-developers.com/showthread.php?t=403963
Out of the cooked roms I like CRC's the best, I would go for 11.2 if you need 100% stability, or 12.8 normal if you don't mind a faster but "beta" rom, not that I have ever found his roms to be buggy.
PDACornerPro.V19's is also popular (Would recommend going for "RBSN" if you chose his)
And MRH's are more "loaded" roms cooked off CRC's.
Click to expand...
Click to collapse
I just wanna say THANK YOU MATE!
I did it. Used CRC 11.2 and is on English an working just fine.
THANK U AGAIN!
D_NazGUL said:
I just wanna say THANK YOU MATE!
I did it. Used CRC 11.2 and is on English an working just fine.
THANK U AGAIN!
Click to expand...
Click to collapse
Happy to help! Glad it worked for you! The first time is always the hardest!
Alright folks, Touch Cruise 2 SIM Unlocker sorted, enjoy the usual boilerplate text:
1) contributing forum members & Elite Team donators... Request a free unlock with your IMEI & email. - if you have an account that has a) existed for a good few months and b) you actually contribute to the site (technical wizardy, or general helpfulness - CONSISTENT AND REGULAR POSTING), then just drop me a message and it's yours, if you don't meet both a) and b) then don't bother - having an account that you rarely posted from is NOT in the least bit interesting.
2) everyone else (new accounts/unregistered/sod all posts, this means you): [size=+2]Get SIM unlocked Here[/size]
Nice one, Olipro!!!
Is your tool instantly kill CID in T4242?
ZILLKA said:
Nice one, Olipro!!!
Is your tool instantly kill CID in T4242?
Click to expand...
Click to collapse
yep it unlocks everything
if you're thinking of Region ID, that requires a patch to the ROM itself.
Olipro said:
if you're thinking of Region ID, that requires a patch to the ROM itself.
Click to expand...
Click to collapse
exactly, and I 'll upload such a patched ROM soon.
cmonex said:
exactly, and I 'll upload such a patched ROM soon.
Click to expand...
Click to collapse
Is it based on NBHUtil utility, or there is another ROM tweak?
alvy said:
Is it based on NBHUtil utility, or there is another ROM tweak?
Click to expand...
Click to collapse
NBHUtil is just a tool that packs .NB into .NBH or extracts .NB from .NBH
the tweak is 2 patches actually. I got distracted, sorry for the delay regarding the ROM
cmonex said:
the tweak is 2 patches actually.
Click to expand...
Click to collapse
all of them in nk.exe?
alvy said:
all of them in nk.exe?
Click to expand...
Click to collapse
no, only 1. the other one is rilphone.
heh doesn't look like there's that many iolite's out there.
cmonex: Well, I think that Iolite is just unneeded daughter without any further advertisement. Instead, everyone wants Diamond2 and other clones. Anyway, nobody around has the same device as me .
Hi, Oli & Nex,
First, thanks for your great work to making these HardSPL and unlockers, without them the Windows phone will be much less attractive.
At the time when my Kaiser is broken, my friend send me a Touch Cruise 09 from China. It is a special edition of Iolite custumized for China Unicom,officially called Dopod T4288. From the specs I found its major difference with the HTC T4242 model is that it does not support WiFi. Later on I flashed your hardspl on it and found it works great on flashing ROMs. But I got some trouble on using some ROMs, for example, for the official WWE ROM version 1.11.706.1, the ROM is flashed smoothly and bootup with no problem. But it can not pass by the customization process. It stuck at about 60%of progress bar on the customization screen after after already aligned screen.
My question is: Is this from the hardware variaty or is CID related?
Thanks again for your contributions.
wg5566 said:
Hi, Oli & Nex,
First, thanks for your great work to making these HardSPL and unlockers, without them the Windows phone will be much less attractive.
At the time when my Kaiser is broken, my friend send me a Touch Cruise 09 from China. It is a special edition of Iolite custumized for China Unicom,officially called Dopod T4288. From the specs I found its major difference with the HTC T4242 model is that it does not support WiFi. Later on I flashed your hardspl on it and found it works great on flashing ROMs. But I got some trouble on using some ROMs, for example, for the official WWE ROM version 1.11.706.1, the ROM is flashed smoothly and bootup with no problem. But it can not pass by the customization process. It stuck at about 60%of progress bar on the customization screen after after already aligned screen.
My question is: Is this from the hardware variaty or is CID related?
Thanks again for your contributions.
Click to expand...
Click to collapse
wow, very interesting. not sure why that would be... maybe some driver issue. you'll need to cook a rom based on original stock ROM for Dopod T4288. to get stock ROM, see ROM update, if there is none yet, dump one from a stock phone.
did you ever solve that?
Well Cmonex, Sorry for the late reply.
Later on I found that I can use most of the custom ROMs here without sticking on the customization screen. Although the WiFi never works or shows up.But I don't use WiFi so much hence it does not matter.
Up to now I can not convince myself to start cooking a ROM. I know it's not difficult to cook a rom but it's not so easy to cook a perfect ROM. Just I can not sit in front of a computer hours after hours. Now that we have so many chefs here, I'd glad to use and test their ROMs.
I did dumped the ChinaUniCom stock ROM before flashing the first ROM, but it's after already flashed your HardSPL. The link of the dumped ROM is here:
http://forum.xda-developers.com/showpost.php?p=5014258&postcount=7
[Etit: Now it's already made into an ruusigned.nbh ROM, from the raw files of China Unicom stock ROM version 1.13.706.2, for the Dopod T4288 variant model of HTC Iolite, simplified Chinese language, the download link is together with the raw files in the above link.]
So if you or any chef here have interest o look into the ROM, please. That ROM is dated end of April, maybe the latest stock ROM up to now and contains some special small apps. Please do tell me if anybody want to translate something from there, since it's CHS ROM.
Tx n bst rgz.
Not security-unlocked
Hey there.
I already had a SIM-unlocked HTC, but I purchased the unlocker so I could have my security unlocked, so I could flash another Radio.
However, that did not happen and I tried over and over again, ending up with the same error messafe: RSA Fail.
Could you please provide a way for me to do this or refund me?
Best regards,
hello everybody
so to unlock my touch cruise 2 sim tmobile hungary , what can i do excatly
please need ur advise
touch cruise sim unlock
please need help how to unlock ittttt
These program can i find it for free?? Thanks!