I had a hard time to upgrade and modify my xda2 so I decided to make a small tutorial for everyone with the information’s I found on the forum. It’s not perfect but it could help.
Thank's to every one who made all this possible!!
Before starting I recommend every one to make a back-up of your rom
http://forum.xda-developers.com/viewtopic.php?t=4608
1- Extended Rom:
Your XDA2 has an Invisible Extended Rom in the device containing the operator’s configuration files and software.
Modifying it will allow you to customize the boot image and to choose the programs you wish to install during the setup of the device.
To show the extended rom on your device your need to apply this small hack and then open your file explorer:
http://www.ppcw.net/index.php?itemid=1638
2- Files contained in the Extend Rom:
Broadcast_WWE.sa.CAB:
Seems to only set the CellBroadcast setting to enabled or disabled. (I guess this refers to the Reception of News via SMS by selecting channels of interested. Quite expensive I think and only interesting for phones that do not have any other capabilities of receiving and displaying information).
T-Mobile NL sets it on, with O2 it's switched off.
CallerIDRC11_WWE_1.5.sa.CAB:
Installs the CallerID application from IA Style and the Photo Contacts extension. There are other programs that are able to provide this functionality but I use it.
CameraRC131_WWE_1.5.sa.CAB:
The camera application for taking pictures and recording videos. AFAIK there is currently no alternative to this one, you should leave it in your ROM.
GPRSMonitor_WWE.sa.CAB:
Includes the GPRS Monitor from SPB Soft. Very useful I would recommend it unless you aren't going to use GPRS anyway.
MIDI56.sa.CAB:
RingTone plugin player. Allow you to play back RingTones in the following formats: mid,3gp,mp4. Also seems to register the audio/midi MIME type for playback of midi files directly from Internet Explorer.
By default the XDA can play back only wav and wma audio files (AFAIK)
MMS1507_WWE.sa.CAB:
Installs the Arcsoft MMS application for composing and sending MMS messages.
VideoMMS.sa.CAB (not contained in Qtek):
Installs the "Video MMS.exe" file into the Windows folder. When you start it you are in camera mode immediately and after you have recorded a picture or video you get into MMS composition mode.
This seems to be just an easier way to compose MMS messages since the main MMS Application (see above) is already able to compose MMS messages.
OEM_AKU1_WWE_4AP.sa.CAB (named OEM_4AP_WWE.CAB in Qtek ROM)
Installs the following files: GPRSAuthentication.exe, BTSetting.exe, STK.exe and WModem.exe
I am not sure if these are customized versions or if the normal ROM doesn't contain them. Well perhaps not because these are specific to the Phone edition so they can't be present in the main ROM, maybe they are contained in the Radio ROM, but probably they are only contained here, meaning you shouldn't remove this cab file.
OEM_WWE_03120301.sa.CAB (named OEM_WWE_03122301.sa.CAB in Qtek ROM)
Installs files for Bluetooth: AudioGW.dll, BthASPlugIn.dll, rilgsm.dll, Serial3.dll and Wavedev.dll. Also contains the new feature of mapping a (dynamic) serial port for BT.
I think you should not remove it.
TM_phone_class10.CAB (not contained in Qtek):
Installs several registry settings regarding phone functionality. (See my other post regarding this topic: http://forum.xda-developers.com/viewtopic.php?t=5539)
TMCOMREG.sa.CAB (not contained in Qtek):
Contains some of the settings contained in the previous one anyway. I'm not sure if it does anything else but I don't think so.
TMD_AP_NL.sa.CAB (not contained in Qtek):
Implements several settings specific to T-Mobile (NL): Restricts video types for MMS. Adds connection and gateway settings for MMS connection via T-Mobile NL. Adds a T-Mobile profile to GPRS Monitor.
I would not install this cab unless you live in NL!
TMD_NL.sa.CAB (not contained in Qtek):
Sets the HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion\MSYSTEM1 value to the provider name.
Not required!
TMDNLCustomize.sa.CAB (not contained in Qtek):
Adjusts all the "theming" stuff: Changes colors, installs Today-theme, installs T-Mobile Dialpad, sets T-Mobile ringtone.
If you don't like you xda2 look like a pink pig you should leave this out.
(You can extract single items from the cab file if you like)
t-mobile_shortcuts_only(UK).PPC2002_ARM.CAB (not contained in Qtek):
Contains some strange things that seem to me rather useless: "WebDisplayText t-zones", "T-Mobile Resetter.exe", "T-Mobile PIE Launcher.exe", "TMobileWebToday.dll", "T-Mobile Homepage Plugin".
I wouldn't install this one!
Version_AKU1.sa.CAB (Version_AKU1_160.sa.CAB in Qtek):
Seems to only set the version number of the extended ROM in the registry.
3- Modifying and editing your Extended Rom:
Most of the latest XDA2 have a write protected Extended Rom
A) For NOT Write Protected Extended Rom:
If your XDA2 Extended Rom is not write protected just add the new files you want, you can find on the forum many different extend rom files (O2, T_Mobile, Orange) and kitchen your own extended Rom by adding the cab files directly in the Extended_rom directory and soft reset.
B) For Write Protected Extended Rom:
The only way for the moment (until we find a way to make the rom writable) is to use the upgrade programs used by the operators and ER2003Edit program.
1)- Download
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
or
http://www.clubimate.com/Support/ruu113sku1.zip
2) Simply unpack the complete T-Mobile Rom update file (it's a zipped EXE) into a folder.
There you will find these 6 files:
- HimaClearJumpCode.exe
- HimaGetDeviceData.exe
- HimaUpgradeUt.exe
- ms_.nbf <----- this is the file which holds Ext Rom!
- NK.nbf (main rom)
- Radio_.nbf (radio rom)
3) Delete the other *.nbf files to prevent updating the full XDA2/MDA2 rom. You only need "ms_.nbf" and the "*.exe" files!
4) Now modify the ms_.nbf with the tool softworkz kindly provided.
http://wiki.xda-developers.com/wiki/ER2003Edit
5) After this, install the modified ext-rom to your XDA2/MDA2 by starting "HimaUpgradeUt.exe" and follow the instructions!
6) If you get a country code error during the install you will need to modify the country code included in the ms_.nbf file
- Download xda2nbftool
http://forum.xda-developers.com/viewtopic.php?t=5563
- Put xda2nbftool.exe in the same folder as your ms_.nbf file
- Run xda2nbftool.exe from Command Prompt and type the following command
xda2nbftool.exe -so O2 -v ms_.nbf
Replace O2 by your operator’s name (ex: orange, O2 etc)
It should now work!
cheers,
Yann
nice one Yann
Thanks
I had a go at doing the "if your extended rom is protected"
I down loaded the file
1)- Download
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
and accidentally ran it.... I know I was stupid... I now have an I-Mate instead of a XDA - O2. Please help can I get the O2 back is there a programme that does the same as the one I just have used. It has changed every thing the radio stack, the other bits of software, I am just pleased it still works of calls.
I couldn’t find the indivuiual HimaUpgradeUt.exe programme any ware.
Please help I am really stuck at the minute!!
The bit I didn’t understand was the bit about unpack the exe. Which I now understand how to do. Although I have upgraded to Rom 1.52.00wwe, radio version 1.06.01, I can haply say I have the original O2 rom back in place with additional programmes installed in the Ex-Rom. I had a fair bit of space so I popped some music files in as well!!!!
Thanks for all the help!!!!
thanks yann for the perfect summary
as newby i needed something clear like this to dare my first rom changes, and i successfully did!
it would be even more perfect if also somehow the program settings/passwords could be cooked in/restored from the extended rom. i searched the forum but could not find any hints.
Are there methods for this ?
Perhaps a silly question, but I'm fairly conservative when it comes to messing around with my device.
How do you find out or know if your Ext ROM is write protected or not? I know that I can add applications to my Ext ROM and it does not seem like I should be able to do that if it's write protected, but then again I'm not sure if this matters.
Ed
ed, if you can copy files to your ext-rom via activesync, it is per definition not write-protected.
your not that conservative, because you already run a tool or edited the registry to be able to see the ext-rom
ronald,
Well I guess you are right I do like to play around, as I get more comfortable doing so. It is this Forum, guys like you, and some other forums that have made this possible for me to do. For some reason I'm more comfortable in general hacking around a desktop pc than a PPC.
I thought my Ext ROM must not be write protected. When I deleted the TMD files, described here as useless, I got the message that they were read only, but they did go away from the Ext ROM Folder. I do not notice a big difference, however, nor did it free up that much memory. I was thinking that I might need to do more then this. Do I?
So basically, if my Ext ROM is not right protected, and I have been already loading programs into the Ext ROM, I’m pretty much at the place people are trying to get with the Ext ROM Cook ER...Edit. Is that correct or am I missing something here?
Ed
Ed,
I do not like flashing rom (or bios) on either my desktop or PDA (if not absolute sure to fix bugs). However flashing the PDA's ext-rom can basically not screw up the PDA because you don't touch the OS, so I flashed the ext-rom to get familiar with the PDA flashing in general (and also to have a restore of my standard used software after a hard-reset).
About your ext-rom; I do not recognise your situation. I would say if it is read-only the file will not disappear (like with my PDA).
I did notice while editing the ext-rom file for flashing that the file is fixed ~16MB, regardless of which cab's are included or deleted.
Maybe this is the same effect that you see when deleting the file in the ext-rom ???????? (although I can imagine both effects have no relation)
ronald
Camera Programs
Okay,
I made a custom ROM with the following programs:
CAB: \Extended_ROM\CameraRC131_WWE_1.5.sa.CAB
CAB: \Extended_ROM\CallerIDRC11_WWE_1.5.sa.CAB
CAB: \Extended_ROM\MMS1507_WWE.sa.CAB
CAB: \Extended_ROM\GPRSMonitor_WWE.sa.CAB
CAB: \Extended_ROM\Version_AKU1.sa.CAB
CAB: \Extended_ROM\OEM_AKU1_WWE_4AP.sa.CAB
CAB: \Extended_ROM\OEM_WWE_03120301.sa.CAB
CAB: \Extended_ROM\VideoMMS.sa.CAB
Awesome, alot less bloat, but.... Camera doesn't work.. Application says Camera is not a valid Pocket PC application. :: grumble ::
Did I miss something?? Camera.exe is there, but doesn't work
Brandon
My Ext ROM is not write protected, and I'm able to run applications in the EXT ROM Folder. I deleted the 2 TMD and the T-Mobile cab files, but I have not nticed a big difference, nor is my GPRS back to always on, which it should be now.
Perhaps the device requires another hard reset without these cab files in place prior to the changes taking actual effect. Does anyone know if my assumption is accurate about the required hard reset?
Ed
what dictates if the ExtROM is write protected or not? is it the version? or the hardware itself? or a mix of the version with the OS checks?
cuz i believe the ROM version is dictated by the version_AKU1.sa.cab. does that mean we can hack the cab (or use a diff version) to disable the write protection?
i'm using a himalaya btw.
I have a question or two.
I'd also like to know if it is possible to modify CAB files so they install an application and then also put in your purchased key or serial depending on the application so it's already registered to yourself. It seems like it must be possible because the GPRS Monitor on the T-Mobile Extended ROM is already Registered when you try and register it yet I was under the impression it normally has to have a key entered to turn it into the full version with no limits.
This would be great if this was possible, if it's a key file then it's simple to copy it over but how about automatic registry entries? Are these done similar to Windows .reg files? Does anyone have any info if a .reg file can be make and run from the Extended ROM to make changes to the registry? This would also allow me to key in a few other things I'd like presetup.
Is there a way to see what registry changes a CAB file makes other than from purchasing MagicCAB? Is there a free program like this? It seems like a reasonable program from the info but I don't want to spend 10 dollars on a program I might only use once or twice.
Acutally, one more while I'm here. Does anyone have a CAB installation version of CabInstl which puts a shortcut in the Programs or an easy way for me to make that? I've set it up so it will copy the EXE in manually along with a shortcut but I've yet to try it. I think it should work OK I imagine, just might be neater and have an uninstall if it's in a CAB format?
Can you delete files from the extended ROM script? Just so I can clear out a few folders of things I don't want in there when I do a hard reset?
Thanks for all your help. I'm looking forward to making a super kick ass Extended ROM for myself, I'm half way there
Updating the indirect way
Had a few problems with the updating process... and thought i would explain how I got around them!
First I updated to the standard 16007DE ROM
Then I installed the Extended Rom Viewer, and then because it is protected, i copied the contents to my HDD.
Then i tried to open the Rom update from T-mobile with the Extended ROM editor, but kept on getting file access errors The only one i could open was the NL 13006 version. So I changed the splash screen, deleted the origianl contents, and then inserted the contents from my updated original Extended ROM, as well as a few other bits that i could find, IE the extended ROM viewer. It is updating at the moment, So I hope it all works.
I have a few questions though!
Does anyone know a way in which I can automatically install a few themes, and a few ringtones? I have a few MIDI files that i want to be installed into the windows\rings folder, and the themes need to go in a folder called themes in My Documents. I also wanted to ask if there is a way to extract the CAB from another program, for instance Voice Commander. It is an MSI, but only works in windows!!!
Any help would be greatly appreciated...
Greets from Hannover, Germany
Juggs :?
Is this going to work:
- Download ER2003Edit
- Download the O2 XDA2 ROM 1.60.50
- Download the T-Mobile MDA2 ROM 1.60.36
- Remove O2 apps i don't want to use
- Add applications from T-mobile rom which i want to use
- Change ROM provider from O2 rom to to T-Mobile
- Save new O2 ROM and upgrade
But... I want to add custom ring tones to contacts, and if possible also want to add custom picture. Also my camera must be able to work. Which software do i need for this?
Because.. All i want to upgrade is today theme to O2's and also the software to 1.60.50... Does the O2 rom also has an "TMDNLCustomize.sa.CAB" ?
Greek full support language for qtek 2020
Hello,
this is a very intresting site!
Can anyone tell me is exist & where can i dinf an extended rom for qtek 2020 with full support of greek language?
Also there any newer version than the 1.66.00 wwe extended1.66.130 radio 1.10.00 wihich my qtek 2020 has??
best regards
george
A) For NOT Write Protected Extended Rom:
If your XDA2 Extended Rom is not write protected just add the new files you want, you can find on the forum many different extend rom files (O2, T_Mobile, Orange) and kitchen your own extended Rom by adding the cab files directly in the Extended_rom directory and soft reset.
B) For Write Protected Extended Rom:
The only way for the moment (until we find a way to make the rom writable) is to use the upgrade programs used by the operators and ER2003Edit program.
Click to expand...
Click to collapse
2 questions for you,
1. how do i know whether my rom is the editable 1 or the non editable one?
2. I tried option A, just mergly adding the CAB files into the EXTROM but... when the hard reset was perform it did not install the CAB files i added in? what could be the prob i know there is a "autorun.exe" in it but i dunno whether will it affect the process. I also notice a "config.txt" in the extrom, tried editing it but it seems that nothing happen
Reason for adding the cab files is because i was using a 1.72.00 rom with radio stack 1.12 but intend to change it to radio stack 1.14 and also try cooking up my own rom in the ktchen but after doin so its like nothing happen. need some advice for cooking roms in the kitchen been searching the forum... found a few but its all talking about Linux platform.
Hi Kelvin,
1)
The way to know if your rom is not writ protected is if you see a folder called extended_rom in the root of XDAII and if you can add files in it.
If not, there’s a nice tool to make the extended_rom visible and to make it writable.
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=extended+rom+hide
2) The config.txt is made to lunch the programs in the extended rom when you hard reset the XDA or when it starts for the first time.
You just need to put the cab files in your extended_rom folder and edit the config.txt this way:
Exemple:
I added the cab file vxIPConfig.ppc3_arm.CAB in the folder extended_rom
and added this line in config.txt
CAB: \Extended_ROM\vxIPConfig.ppc3_arm.CAB
Cheers,
Yann
hi yann,
i tried doing that way as i figured out that config is like a startup "prg" to actually start the programs installing when hard reset is performed. But the thing is i cannot make the programs i added in the install after the hard reset is perform. I don't know why but the rest of the cab files can be done. Do adding of all this cab files into the ROM consider cooking ROM??? not really fimilar with the terms of cooking ROM unless that is the way.
The subject says it all. Whenever I perform a cold reset the extended rom does not load. It is filled with the correct cab's, I can see that when I unhide/unlock the EXTROM, but it just won't load. I manually load all the cab's now, but maybe somebody knows a solution to this problem? This goes for an offical release from QTEK.nl as all others. The autorun.exe and config.txt files are present.
is the config.txt filled with the correct cab file listing ?
if you havent edit'd it and the first cab entry in it is a cab you
changed it may skip the rest of them
I have checked the config.txt and it lists only CAB which are present, including TPDisable.exe and TPEnable.exe. So that should not be the problem. Even offical releases don't load properly. I am just afraid it might be a hardware problem, I have dropped it a few times......
Is there a good Samaritan out there who can explain to me exactly how the program is installed and how does one go about editing the Registry of the TyTN. I have bought Nokia HS-12W BT stereo phones and have added in Sleuth's anti-skip modification. All works well except that I do not get stereo. I must modify the Registry according to Sleuth's working model, and need to do the Registry mods.
Please help!
I am sure there are other newbie's who are also keen to learn new tricks.
Which problem are you exactly having? Just install the cab file, run the program and browse the registry to the place you want to modify, add or delete a key. Tap on the key or screen to do this.
You have to copy the cab file to your Hermes first. When I install cabs, I either send them to myself as email attachments or I use activesync explorer mode. Alternatively, if you can find the site using Pocket Internet Explorer (PIE) then you can download the cab directly. Once the cab is on your Hermes, then tap to install.
There is an alternative way to install apps on WM and that's with a windows based installer. If the file isn't a cab, then you'll need to connect up your hermes with its USB cable, wait for activesync to connect then run the installer on your PC. The installer itself will send the cab file over for immediate installation.
If you're familiar with the Windows registry you'll have no problems understanding the WM registry. When you change a value, make sure you power off with the power button to reset & make the change active, otherwise your registry setting might not "stick". Some registry values take effect immediately but I always power cycle after making a change just to be sure.
Installing PHMRegEdit
Hi
Could you please attache the CAB file.
I have load the file and the file is PHMRegEdit.msi
Thanks
I was wondering "which" .cab to copy over for the AT&T Tilt 8925. I did try the Stngr_ARM and it did install. However, I can not expand the registery top folders or export the registery.
Thank you in advance
OK, figured it out.
regedit.Mrln_ARM
did the trick
Does Anyone Know The Registry Entries Required To Make The ROM Run preautorun On The First Boot Of The ROM After A Succesful Upgrade.
I Need To Run The preautorun File As It Seems autorun In The ExtRom Doesn't Do What I Need It To Do.
Cheers
P.S I Have Looked Through The Registry Of A Normal Rom And Found Nothing, So To Any Guru Who Knows Thanks In Advanced
mousey_ said:
Does Anyone Know The Registry Entries Required To Make The ROM Run preautorun On The First Boot Of The ROM After A Succesful Upgrade.
I Need To Run The preautorun File As It Seems autorun In The ExtRom Doesn't Do What I Need It To Do.
Cheers
P.S I Have Looked Through The Registry Of A Normal Rom And Found Nothing, So To Any Guru Who Knows Thanks In Advanced
Click to expand...
Click to collapse
I have been looking all over for this also.
German Guy modified Slueths developer Rom to run the 'preconfig' commands,
such as;
LOCK:Enabled
EXEC:\Windows\SetAcousticParam.exe
Hide:Enabled
LOCK:disabled
RST: Reset
Certain ROMs I can just drop the files in the dump folder and all will install fine.
Others won't.
And from my searchings so far, I think it's the preautorun.exe that calls it.
But certain Roms still won't Execute the 'preconfig' commands, even after I add the preautorun.exe.
So what tells preconfig to run right after a we get done aligning screen, setting date and so-on, and yet just before it would launch extrom.
And if it's preautorun.exe that executes preconfig, then what tells preautoconfig to run?
I found this linked in the wiki, yet I'm still not getting it to work.
http://mobilitydubaiforums.com/grou...c&cdra=Y&s=553609464&m=7891086801&f=582600994
Hope someone knows.
Thanks,
Berd
There's a provisioning file.