Related
Anyone know a place to get some screen protectors for my Wizard.
I am based in UK if that helps
Thanks
Scott
I have ordered Brando from http://shop.brando.com.hk/ and I`m pretty pleased, look good and protects as well...
Today my Brando
"Ultra Clear - Protector Plus"
arrived. Im very pleased with it. It fits perfectly and looks very clear. Using the stylus works almost as without a the screen protector.
Conclusion: highly recommended
Also got from Brando - except I mucked up the install and now need to clean the cover. Any ideas on how best to the clean it as it does say its washable - just not how.
Scott
Brando Rocks
I've used a Brando screen protector for about 2 years on my old Sony Clie - Excellent quality, I do think it's the best on the market.
Worth the money
Brando application problems
I ordered a Brando and it came nice and quick. It looks like a quality item, but it was a b*gger to fit. I still haven't got it right. It kept going on at an angle and wouldn't lay flat due to comin into contact with the screen surround. I had to take it off, rinse all the [email protected] off it that had got stuck whilst I was faffing around and dry it each time. It took the best part of an hour and it still has fluff under it and it still isn't in the right place.
It works perfectly though. I can't criticise the thing itself just the application and/or my ability to do it.
Ho hum. :?
Definetly Brando...Ultra Clear.
I had a couple of them that I used with my HTC Magician and they fit perfectly on the HTC Wizard.
Sorry...
...
i sell screen protectors
I sell screen protectors, 5 ps for 7,50 euro. sending trough hole of europe
after paying i send it. give me the sice and i make it
Greetings Rene
surprised no one has mentioned the pocketpctechs.com screen protectors. I think those are the best.
also are the jam's and k-jam's screens the same size? on clubimate.com it says 2.8"
pickin up my k-jam today!! :lol: :lol: :lol:
fone_fanatic said:
surprised no one has mentioned the pocketpctechs.com screen protectors. I think those are the best.
also are the jam's and k-jam's screens the same size? on clubimate.com it says 2.8"
Click to expand...
Click to collapse
I'm surprised too. I think these are the best. Fit perfectly and if installed properly you cannot even tell they are on.
I never tried the AG (Anti-Glare)
I use the C2 ones (clear) and I think they are great.
i have the AG on my jam and tried installing the C2 on my kjam last night, but its so thin i tore it
fone_fanatic said:
i have the AG on my jam and tried installing the C2 on my kjam last night, but its so thin i tore it
Click to expand...
Click to collapse
wow... that sux. i know it's thin, but didn't think that thin. actually i bought the c2 two pack and i messed up the first one too. got so dirty i didn't even want to clean it. i hate installing any type of screen protector.
i got one of these, it slips under the corner of the screen surround rather than sticks to the touch screen, seems great and robust and very cheap!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=5853656667&ssPageName=STRK:MESE:IT
I have used the ones they sell in Ebay. They are cheap but at the same time the quality suck. I have used my MDA for 3-4 days after i had put in the protector and it has scratches all over it. Also each tap with the stylus leaves a small mark on the protector.
I am going with the Pocket PC techs windshield. I think investing 25-30 bucks for my 400 buck MDA is worth it.
Peace
anyone know of any uk sellers for the pocketpctechs or Brando ones?
A comparision of many different screen protectors
http://www.brighthand.com/default.asp?newsID=11356
take a look at this site. It gives a review of Brando, PPCtech, nushield etc.
Will help you decide
I have been using the PocketPC Techs WriteSHIELDs for about 3 years now, and I absolutely love them. Just got a wizard and immediately bought the Anti-Glare screen protectors from PPCTechs. They're fantastic. I've tried the clear ones they have, and don't like them as much. The colors might be a little better, but I've gotten really used to the "pencil on paper" feel of the stylus on the screen with the AG ones. I agree with everything they said in the article at Brighthand about them. Granted, I've never tried another brand, but these have the highest level of recommendation from me...
taibo said:
I have been using the PocketPC Techs WriteSHIELDs for about 3 years now, and I absolutely love them. Just got a wizard and immediately bought the Anti-Glare screen protectors from PPCTechs. They're fantastic. I've tried the clear ones they have, and don't like them as much. The colors might be a little better, but I've gotten really used to the "pencil on paper" feel of the stylus on the screen with the AG ones. I agree with everything they said in the article at Brighthand about them. Granted, I've never tried another brand, but these have the highest level of recommendation from me...
Click to expand...
Click to collapse
Agreed - the only other brand I've ever used were Martin Fields, which were also very nice. (I used those on a P900 though - different device altogether).
What cases are you chaps investing in to protect your Heros?
Have not seen any yet. Not sure if I should get one or not I did not get one for the Diamond and that is in great nick
New mobiles make me nervous...........
If you have the white... with Teflon coating and a good screen protector I would imagine that a case isn't necessary.
You haven't witnessed my ability to juggle mobiles and drop things out of pockets onto concrete
Also, when locking onto GPS signals, putting phones on window ledges and watching in horror as they drop 30 foot to paving slabs.....oh yes.....
Been there....done that!
cbailey said:
You haven't witnessed my ability to juggle mobiles and drop things out of pockets onto concrete
Also, when locking onto GPS signals, putting phones on window ledges and watching in horror as they drop 30 foot to paving slabs.....oh yes.....
Click to expand...
Click to collapse
i will be keeping a firm grip on my hero....
my old diamond was always trying to jump out of my hand
Mine will reside in my pocket, next to my homekeys, some coins and lint.
I like to put mine in a belt case while at work as I'm always running about. Apart from that a good screen protector normally does the trick
Soon available at www.noreve.com (high quality cases)
I'v tried all the high street stores, and nothing, 99% of mobile shops don't even know what the HTC hero is and 95% of them only sell iPhone crap and nothing else, the worlds getting taken over by sheeps with iPhones
Original HTC Pouch
I bought this:
https://www.expansys.at/d.aspx?i=184424
...and unfortunately, it's crap. My white Hero has now some black parts and looks already old.
So, don't buy this if you have a white Hero. No problem whit a black one, I guess
schauol1 said:
I bought this:
https://www.expansys.at/d.aspx?i=184424
...and unfortunately, it's crap. My white Hero has now some black parts and looks already old.
Click to expand...
Click to collapse
I got this for free (http://www.handtec.co.uk) and so far no smudges. I tried rubbing some white plastic (NOT my Hero) on the inner leather lining, and with considerable effort I can rub off some black colour. After cleaning the white plastic piece it was bright white again, maybe you want to give it a try.
The case is a bit tight, though. On the other side, the phone can't fall out even if the magnetic latch opens accidentally ;-)
Overall, I'd give it 7/10 (good but not great).
Foof case for my Hero
At the moment I'm using a Foof case with a sherpa fleece inner. Its surprisingly protective and fits perfectly. Snug enough not to slip out but easy to remove. Got the ipod touch size from http://foofshop.com/ and they have great choices for different colours.
I've got this pouch:
http://www.krusellcases.com/uk/p_krusell_product.aspx?i=179446
Just what I wanted so far, it protects the phone and is rather slim. I didn't want more bulk in my pants pocket. The Hero fits quite ok, maybe it's a wee bit too wide, but not much.
Edit:
I'm gonna return the Pouch to the shop. The inner part (as well as the exterior) is made of a leather-like matherial in black color. The first days it was ok, but it has started to leave black stains on my white Hero. I was able to remove them really easily but I'm not happy anymore. I'll go check if its a defect in my pouch or all these models leave stains. I don't recommend it anymore.
tallen3 said:
At the moment I'm using a Foof case with a sherpa fleece inner. Its surprisingly protective and fits perfectly. Snug enough not to slip out but easy to remove. Got the ipod touch size from http://foofshop.com/ and they have great choices for different colours.
Click to expand...
Click to collapse
That foofcase looks great..ordered two
I've got this pouch
http://www.mp3shop.nl/product/72567/50854/puro-nabuk-case-red-ipod-touch-iphone.html
The perfect fit for my Hero, and it is slim.
I bought my on expert in Sweden
batteries?
anyone find any good deals on replacement batteries that hold more power?
sprinkles said:
anyone find any good deals on replacement batteries that hold more power?
Click to expand...
Click to collapse
Why would you post this here, rather than the thread about batteries?
I do not have a Hero yet, but I do plan on getting on when it is released in the US. Anyway...
Have you guys ever heard of SwitchEasy? They make cases for the iPhone and they are my favorite case maker, and I was planning to get a case from them as I was originally planning to buy an iPhone about a year ago. However, I did buy one for my girlfriend about a week ago and she LOVES it. I waited on buying that iPhone and out came the Hero.
I recently sent them an email to see if they would ever consider ever making a phone case for the Hero. Unfortunately, that was about 2 days ago and have not had a reply...
Perhaps if we can get enough people to send them emails so that they can realize how many people have Heros (and provided you like their cases ) we can get them to manufacture some cases and add a bit more selection to the slim pickings so far.
I am not trying to promote their products or site in any way, but if you like the style of their cases like I do, I would definitely like to see a case from them for the Hero. Was just wondering if we can do a group effort here.
If this post violates any rules that this forum has, please delete or mod it. Thank you!
I'm using the HTC belt holster that I got for my Diamond. It's a nice tight secure fit. The Diamond used to wobble around in it.
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
Does anyone know if Zagg's invisible shield or Bodyguardz' protective film for european Touch Pro 2 will fit ATT Tilt2? Thanks
I had a similar question. I have the EU version, unbranded, and am wondering if the form factor is the same as the AT&T model. The button placement on the front looks to be identical. Can you post a picture of your battery cover?
Here we go. Looks like EU TP2, except PTT button.
Thanks for the pics. You're right, it looks like my European model. I like the color of yours better though The form seems to be the same on the backside too. Hope someone can speak to your original question for you.
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
I got a rubberized hard plastic shell designed for the European model and fits the Tilt 2 quite nicely. The only drawback is there is no cutout for the PTT button. Other than that I cannot find anything wrong with the European case being used with the Tilt 2.
Thanks for the info. That should indicate that on the outside at least the two shells are the same, with the exception of the PTT button anyway ( and maybe a forward facing camera on the EU model?). I'm thinking that the screen savers and clear vinyl "cases" will be mostly interchangeable between the two types as well.
Saw this posted on another forum. I don't have any experience with this brand myself, but looks familiar to the Zagg product and it is specifically for the Tilt2:
http://www.clearprotector.com/atandt-htc-tilt-2-extended-protector.html
If memory serves this is the company that I bought a similar case from for my Wizard. Thanks for the link. I've been using the case that came in my box and like it a lot. It's slim and provides sufficient protection. This protector should complement it well, and allow me to leave the phone out of the case while driving without having to worry so much about it sliding around and getting scratched up.
I just ordered one (extended protector), for my unbranded phone and will let you know what I think of it when I get it, as well as what they're customer service is like.
These cases can be tough to get on, and you have to accept the feel of the edges of the material when handling the device after installation. But they do provide a good grip to help prevent the slippery little buggers that our phones are from jumping out of your mitts. And the material is tough to say the least. Once they're on right, they stay put and do the job.
I just looked on the bodyguardz website and saw that they have a kit for the Tilt2 now. I should have it later this week. I will post updates once I put it on.
Don't mean to hijack......
Don't mean to hijack the thread but do any of you use either of these products with a leather pouch/sleeve like an EaseCase. I'm wondering if there will be any peeling issues when sliding the device in and out of the case.
Received the TP2 kit today, just applied it to the phone. Came out ok, but the only thing that doesn't match is the front camera hole, so I left the original protector on; and I had to cut off a small peice of protector from the side for the PTT button. Probably I will try another set from somebody else.
How did they work out?
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
edskii said:
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
Click to expand...
Click to collapse
Did you guys have any success?
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
For anyone interested in bodyguardz, now is a good time to order. They already include the 25% discount for Christmas and if you use coupon 155A6 you get another 20% off!!
p51d007 said:
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
Click to expand...
Click to collapse
Does The Isheild cover the chrome painted rim around the screen? This is what gets damaged most readily (I Know I have dropped mine out of my pocket while ridding my bike on Highway 50 in Orlando, FL.).
Anyone please reply who has a Tilt2 & Zagg Isheild installed? Does it cover the chromium = )
No, it doesn't cover the chrome. For me the screen protector also didn't fit quite right. In the process of removing and reapplying it, I have now managed to stretch it out (which necessitated cutting around the speaker so I could hear) and got all sorts of fingerprints and whatnot under it, making it useless in sunlight.
Many of the major malls in the U.S. have "kiosks" that will do a custom install.
My buddy had his ENTIRE TP wrapped, including the chrome.
I wanted to make a new thread, but decided not to clutter the board and instead ask in a couple threads for some pictures. Can anyone with the Gadgetshieldz for the ATT Tilt 2 post some hi-res images so I can see what it looks like and how it fits around the corners and sides? Thanks
I used to have SEIDIO cases for my mogul and touch pro... but it seems they havent made one for the Touch pro 2 yet... i just got my TP2 today and ill give myself 1 week tops before i drop it So i need one badly!
So with that i want someone to recomend me a case like the ones SEIDIO makes... i like the rubber/plastic feel/construction and at the same time like that they use very thin/light material... any help is greatly appreciated!
This might help:
http://www.seidioonline.com/product-p/csr2htch2-bk.htm
http://www.seidioonline.com/Category-s/3589.htm
Me to!
Exactly what I'm waiting for as well - can't find yet for my month old Sprint TP2. Anybody finds similar I'd love to hear about it.
Hard Case definitely needed
I would like a hard case for my AT&T Tilt 2 (Touch Pro 2). If anyone has any information, please share it!
BUMP :s
Anyone?
Acrylic Case for Tilt 2 found
Check this out: http://www.wireless.att.com/cell-phone-service/cell-phone-details/?device=HTC+Tilt2&q_sku=sku4030272
click on the "compatible accessories tab"
Amazingly, AT&T is the first to offer a "naked acrylic case" for the Tilt 2. It sounds like a Seidio-type case, except the case has an attached screen protector. The photo is horrible and I don't know of any AT&T store that carries these cases so, someone will have to take the plunge for us to find out what they're like. If I decide to buy it, I will certainly post photos and a review here.
I picked up the clear case when I got my Tilt 2 this weekend. Local ATT store in California had it in stock. The case is by Case Mate. It is pretty nice. The thin plastic over the screen is not causing any problems, but it tends to stick to the screen, so you do get these little air bubbles in spots. I'm hoping that if I really clean the screen well that problem will go away. I'm getting a little grit under the screen at the edges. I don't know if that will be a problem.
It does not add much to the size of the phone, so I'm happy.
ThomD, can you post photos of the case? Also, I assume the case is two pieces, can you confirm? Is it possible to cut the screen cover part off and use an affixed screen cover?
Willl the ATT case fit my Sprint TP2?
Photos later today, if work isn't too busy.
The case is two pieces. With a dremel is should be easy to take out the screen protector part, it is very thin compared to the rest of the case.
If Sprint and ATT have the same button layout it should work for Sprint phones.
I have the sedio case for my Treo Pro that I bought from sprint and the sprint touch pro 2 fits in the case perfectly!!! I love that it faces inward and protects the screen.
o0adam0o said:
I used to have SEIDIO cases for my mogul and touch pro... but it seems they havent made one for the Touch pro 2 yet... i just got my TP2 today and ill give myself 1 week tops before i drop it So i need one badly!
Click to expand...
Click to collapse
About three weeks ago, SeidioOnline customer service advised me that they hope to have the spring clip holster for the TP2 available around the first week in November. We'll see . . .
touch pro 2 case
heres a web site that has a rubberized case for the tp2 . It says for CDMA device but you be the judge
http://www.eforcity.com/clipon-rubb...p-for-htc-touch-pro-2-black-chtctouccoc6.html
mr_mogul said:
heres a web site that has a rubberized case for the tp2 . It says for CDMA device but you be the judge
http://www.eforcity.com/clipon-rubb...p-for-htc-touch-pro-2-black-chtctouccoc6.html
Click to expand...
Click to collapse
Out of stock... geeze did u guys buy them al?
I'm just going to wait for the Seidio becuase no one else makes a holster that works with the case and keeps the screen facing in, protecting it. Well not that I know of. If there is another lmk.
I also like that they are making a dock station for it that will be compatible with the case.
I went to Pocket Solutions and bought their leather Prestige case for the VZW TP2...a touch of elegance and with the belt clip.
However, I, too, am waiting for the new cases from Seidio...just received their extended 1750 battery and like it very much!
Anthony
Looks like the Seidio Innocase Surface is now pre-orderable and offically ships on 11/9. Hopefully they'll have the holster to go with it by then as well and maybe even the cradle.
o0adam0o said:
I used to have SEIDIO cases for my mogul and touch pro... but it seems they havent made one for the Touch pro 2 yet... i just got my TP2 today and ill give myself 1 week tops before i drop it So i need one badly!
So with that i want someone to recomend me a case like the ones SEIDIO makes... i like the rubber/plastic feel/construction and at the same time like that they use very thin/light material... any help is greatly appreciated!
This might help:
[ rl]http://www.seidioonline.com/product-p/csr2htch2-bk.htm[/url]
http://www.seidioonline.com/Category-s/3589.htm
Click to expand...
Click to collapse
Think it to late... But i have two shield on my touch pro 2
First Shield- Zagg screen Reason i bought is because the plastic its made out of is starch proof, meaning if your key rub against your screen you wont see any of those ugly lines.
Second Case- I Bought Off Amazon.it exactly what Ur looking for, it come with a belt clip that can be remove at any time, it come with an extract peace that change the belt clip clip on part to a flat back give u the ability to slide the phone right into your pocket without that belt clip sticking out.
http://www.amazon.com/Lambskin-Leat..._1_6?ie=UTF8&s=wireless&qid=1256960998&sr=8-6
That how it look. Its worth the money. Also the belt clip turns into a stand like the one in this picture
http://ecx.images-amazon.com/images/I/31s-JPETdkL._SL500_AA280_.jpg
KB41786 said:
Check this out: http://www.wireless.att.com/cell-phone-service/cell-phone-details/?device=HTC+Tilt2&q_sku=sku4030272
click on the "compatible accessories tab"
Amazingly, AT&T is the first to offer a "naked acrylic case" for the Tilt 2. It sounds like a Seidio-type case, except the case has an attached screen protector. The photo is horrible and I don't know of any AT&T store that carries these cases so, someone will have to take the plunge for us to find out what they're like. If I decide to buy it, I will certainly post photos and a review here.
Click to expand...
Click to collapse
http://www.wireless.att.com/cell-phone-service/accessory-details/?q_sku=sku4060235
your link only took to the phone.... this goes right to the protector.
starscalling said:
http://www.wireless.att.com/cell-phone-service/accessory-details/?q_sku=sku4060235
your link only took to the phone.... this goes right to the protector.
Click to expand...
Click to collapse
I bought this clear case at a local AT&T business center. It's certainly enough that I don't feel like keeping the phone at home because I'm worried of the damage that might happen if I put it in a pocket..
I am not-so patiently awaiting the seidio case and clip for this phone however, as I loved the one for my original Tilt.
Seidio Case and holster - Nov. 9
http://www.seidioonline.com/product-p/bd2-hlcsr2htp2s-bk.htm