First, I'd like to thank all of the people on this forum, as without the forum itself I wouldn't be able to do anything
I've had my G4 Wizard for less than a month, and it's already unlocked and flashed. To all of the people who don't know how to flash I can only tell: Read! And use the search. Most of the problems have been answered hundreds of times on this forum.
I did a lot of reading before first flashing my device, and all went perfectly, from the beginning to the end.
Anyway, when I found out that my Wizard is actually a G4, I was dissapointed that there is really not a lot of info about it in here.. Especially about how to flash it (I know it's not that hard, but for those ones that don't know, the first time is terrifying ) I am going to try to make one, but if there are any mistakes, tell me please
First, I'd like to note that this is only a "tutorial" based on my personal experience. Although I didn't have any problems flashing my device, I do not take any responsibility for your actions!
Next, and this is important.. Make sure that you REALLY HAVE A G4 DEVICE and not a G3!!! Think before flashing, otherwise you can brick your device! A G4 Wizard will report an IPL and SPL similar to 2.21.0001 and a G3 PDA will report something similar to 2.21 or 2.21.001 (notice the number of 0's at the end!)
And don't forget, these actions WILL ERASE ALL OF THE INFO from your phone, so BACKUP, BACKUP, BACKUP! You have been warned
Some other notes:
1. Most of the custom Rom's out there will require you to CID-unlock your device (most but not all of them.. See this thread for details)
2. Yes, CID-unlocking will void your warranty
3. There is always a chance that you will brick your device, even if you do it right. But this is really unlikely, usually because you tried to use a G3 Rom on a G4 device. Be careful!
4. At the moment of writing, the only way to CID-unlock your device is via http://www.imei-check.co.uk/
5. Please don't Rush yourself! Think first, read the whole post. Remember, this is not a self-contained guide! Look through the forum to be sure that you're ready, and that you really want to do this!
And last, but not least! Please do not use your PC for the time you're Upgrading! Close all of the running applications, and wait until it will finish! Don't repeat other's mistakes.
______________________________________________________
Now, if you still want to do it, you can continuse with the steps:
0. Be sure to backup all data on your phone, close all the apps on your PC, charged your phone to a minimum of 50%!!!
1. Download the Rom you want to 'flash'. Remember, you need a G4 Rom!!! Look here or here for example.. I'm using the WM5 AKU 3.3 Rom from this forum..
Extract it on your Harddrive. Don't run it directly from WinRar or any other archiving program you're using!
2. Open your ActiveSync without your phone connected! and select File -> Delete Mobile Device. After that connect your phone, and press cancel in the window that appears. Be sure that in ActiveSync you have a "Guest" line in gray!
3. If you did everything that have been said, then you're ready to flash.. Run the RUU. Usually it's a file called "ROMUpdateUtility_Wizard_NoID.exe". If your update utility is not in English, you can download the English files, and overwrite the ones you have (The english files is NOT a rom! You have to download a Rom first!). If you get a message like:
ERROR[300]: INVALID UPDATE TOOL
This Update Utility cannot be used for your PDA phone. Please get newer Update Utility then download the new Update Utility. Both can be found here.
4. After several "Next" clicks, your phone WILL restart. Don't disconnect it, just leave it. It will load into the bootloader (A screen with 3 colors, you'll know when you get to it), after that it will start flashing. You will see the progress bar on both your PC and PDA. Give it a LOT of time. It can flash your phone from as little as several minutes (Guess I vas lucky ) up to 10 and more minutes. Sometime, the progress bar will turn red and stop. DON'T TOUCH IT, it's not an error. It has to set up itself, so it's OK!
In case you get ann error while flashing, or your computer restarts while flashing, don't panic (for now). If your phone enters the bootloader after that (hopefully) than just run the utility again on the PC (with the phone in the bootloader) and it will start again. If the situation repeats try another ROM.
If you still have issues, uninstall ActiveSync. REBOOT! Download and install ActiveSync 4.2 Don't create a partnership.
You should be OK after these steps.
Some last words..
I may have used some words or expressions from other's people posts (mainly from this post) This was done just to be sure that I don't miss anything, and all I've said is as close to the truth as possible.. Thanks to the owners of this site, and all the people who helped it it's developement!
Enjoy!
Flexer
main problem how to unlock G4 with out imei-check.co.uk
after that you can flash it as G3
lasc said:
main problem how to unlock G4 with out imei-check.co.uk
after that you can flash it as G3
Click to expand...
Click to collapse
The only problem is that you have to be sure to take the right rom.. Noone wants his device bricked, right?
lasc said:
main problem how to unlock G4 with out imei-check.co.uk
after that you can flash it as G3
Click to expand...
Click to collapse
You can't unlock without imei-check. If you did unlock through imei-check, you still can't flash a G3 rom with IPL/SPL in it unless you want a brick.
@Flexer: great tutorial! Should be a sticky.
2 vippie: Thanks. Will try hard to be useful for the forum
Hello all,
for some reason the only rom that G4 loads is 2.3...I have spent days trying to load 3.3 and nada.
I have followed your instructions...anyone has any?
only this works for me
RUU_Molski.Biz_226102_22610105_022511_G4_WWE.exe
I tried these
WM5_AKU3.3_Crossbow_BETA_G4
WM5_AKU3.3_Crossbow_BETA
RedHook said:
Hello all,
for some reason the only rom that G4 loads is 2.3...I have spent days trying to load 3.3 and nada.
I have followed your instructions...anyone has any?
only this works for me
RUU_Molski.Biz_226102_22610105_022511_G4_WWE.exe
I tried these
WM5_AKU3.3_Crossbow_BETA_G4
WM5_AKU3.3_Crossbow_BETA
Click to expand...
Click to collapse
Tell me.. Is your G4 CID-Unlocked or not? The 3.3 ones require your G4 to be unlocked...
Flexer said:
Tell me.. Is your G4 CID-Unlocked or not? The 3.3 ones require your G4 to be unlocked...
Click to expand...
Click to collapse
Not it is not. I guess I will have to spend the money to get it cid-unlocked
RedHook said:
Not it is not. I guess I will have to spend the money to get it cid-unlocked
Click to expand...
Click to collapse
That's true.. I had to unlock mine to flash that Rom.. But I love it
lasc said:
main problem how to unlock G4 with out imei-check.co.uk
after that you can flash it as G3
Click to expand...
Click to collapse
Yeah... do that and you`ll have another brick in the wall
The only difference from G3 and G4 ROMs is that the G4 ROM will NOT rewrite your IPL/SPL ... so you can flash any ROM WITHOUT the IPL/SPL parts.
AND VERY IMPORTANT ... i repeat... it does NOT matter if you have a CID UNLOCKED G4 ... if u try to flash IPL/SPL on it, you`ll have yourself another paper-weight.
I did everything, but after reboot it runs still previous Rom. Like I did't nothing...
tabasco said:
I did everything, but after reboot it runs still previous Rom. Like I did't nothing...
Click to expand...
Click to collapse
Which rom did you try to flash? And is your device CID unlocked?
Changing IPL/SPL
I would like to change to a newer IPL/SPL on my G4 unlocked UK T-mobile MDA Vario. I have read that I need to use one of the T-Mobile ROMS but on the xda-developers ftp server it is not obvious to me which are for a G4 phone.
Can anyone give me some recommendations please?
pdagenius said:
I would like to change to a newer IPL/SPL on my G4 unlocked UK T-mobile MDA Vario. I have read that I need to use one of the T-Mobile ROMS but on the xda-developers ftp server it is not obvious to me which are for a G4 phone.
Can anyone give me some recommendations please?
Click to expand...
Click to collapse
Dude, where did you read that???
AFAIK you don't change your IPL/SPL.. Only if you don't want your device bricked..
At least show where did you find it?
Flexer said:
Dude, where did you read that???
AFAIK you don't change your IPL/SPL.. Only if you don't want your device bricked..
At least show where did you find it?
Click to expand...
Click to collapse
What I found is part of the discussion regarding G3 Wizard http://forum.xda-developers.com/showthread.php?t=285435 - see the first post
Does anyone know if the US T-Mobile 2.26 ROM link in the above G3 thread is also applicable to a UK T-Mobile MDA Vario unlocked G4 and will it change my IPL/SPL to 2.26?
You can flash a new IPL/SPL on a G4, its just that theres generally no need, its risky and you have to make sure its not a G3 IPL/SPL. I think there is a newer one to 2.21.0001 but I'm not sure. I wouldn't change it if I were you as it runs fine even with latest WM6.
pdagenius said:
What I found is part of the discussion regarding G3 Wizard http://forum.xda-developers.com/showthread.php?t=285435 - see the first post
Does anyone know if the US T-Mobile 2.26 ROM link in the above G3 thread is also applicable to a UK T-Mobile MDA Vario unlocked G4 and will it change my IPL/SPL to 2.26?
Click to expand...
Click to collapse
DON'T do it! By changing IPL and SPL on your G4 you'll brick it. Really..
Why would you want it anyway?
Flexer said:
DON'T do it! By changing IPL and SPL on your G4 you'll brick it. Really..
Why would you want it anyway?
Click to expand...
Click to collapse
Good work on the tutorial. Linked to it.
tmobile rom
I have an Cingular 8125 CID & SIM Unlocked G4 phone via http://www.imei-check.co.uk/, is it safe to download to run the new T-Mobile PDA Phone ROM Update Utility 2.6 from the T-Mobile website or will I brick my phone? Because I don't know if that ROM is intended for G3 phones or has a bootloader?
yahdimon said:
I have an Cingular 8125 CID & SIM Unlocked G4 phone via http://www.imei-check.co.uk/, is it safe to download to run the new T-Mobile PDA Phone ROM Update Utility 2.6 from the T-Mobile website or will I brick my phone? Because I don't know if that ROM is intended for G3 phones or has a bootloader?
Click to expand...
Click to collapse
As I mentioned in my posts earlier...If you download the package from your provider chances are its for G3, they do not post different versions for G3 & G4, only for G3. If you download elsewhere from the internet and the ROM is packaged...right click on the .exe package and extract the content to a folder of your choice and check the RUU installer. If it says "NoID" somewhere in its name, its most definitely for G3 OR G4 (may be installed on either device).
Related
OK Guys. Problem Solved : Dead devices due to tmob 1.72 + Downgrade
Problem: New version changes Device ID, as well as ID format.
If you upgrade to tmob 1.72, you cannot downgrade back, as you cannot supply valid NBF files for the new device ID. If you try to play around, you end up with a very dull bootloader screen "Serial V.1.06", and nothing more can be done. SD card images cannot be flashed due to the same reason.
Untill our developers come up with a simple tool, the following 2 solutions can be used to get out of the disaster:
Solution 1:
(tested and 100% working for both dead devices stuck in bootloader and devices working but stuck with the tmob 1.72 version.)
You will need a working device (with old ROM before 1.72), besides your dead one.
1. Prepare your DEAD device in Bootloader mode. Don't connect it yet. (If it is still working but you want to downgrade, press Power+Action+Stylus, if it is already stuck in bootloader, just reset with stylus).
2. Connect your WORKING device, with OLD version via activesync.
3. Start the rom installation of your choice normally, with a version compatible with this WORKING device (Official or Modified NBF files via HymaUpgradeUT). If you don't know what I am talking about, just use your official file downloaded from your WORKING devices' provider).
4. Press NEXT, untill you are presented with the Current version and the one that will be installed. DO NOT click "UPGRADE" yet. (If you got an error so far, you are not using the correct version for your working device.)
5. When you get the dialog with the versions, disconnect the WORKING device from the craddle and connect your DEAD device, in bootloader mode.
6. Click "UPGRADE" and go get yourself a drink.
Et Voila.
Thanks to Victor for inspiring this solution.
Solution 2:
If you don't have another working device, and only have a dead one stuck in BootLoader, you can flash the attached image, through SD card. It will bring back your device to life with the BETA tmob 1.72 CE ROM.
Write the image to the card using "NTRW". Info on SD images and NTRW can be found in this forum.
Unfortunately, i don't have device even with working bootloader And it stuck in TMObile screen
I am sorry I have no solution for screwed Bootloaders, but if your device loads into the tmob screen, there must be something there still working. The only thing I can advise is to try to hard reset and not go into the extended ROM setup files (Soft Reset right after the Hard Reset and welcome procedure), but I guess you don't reach that far ....
What is about for XDA 1?
HI !
I have a Dead XDA. The bootloader is OK. How can I do with it ?
I need some advice for doing it, please !
Best reguard,
Carlo & Victor... You are GREAT!!
Okey.... I will try FIRST!!
please, where is the officiale t mobil rom ? we all have the beta (and thee pb you solve) but not the official one...
thanks
When i posted the T-mobile 172 rom i did not know how much greif it would cause people, sorry to everyone for this
As to the second solution using the SD card is it possible to use this method on a working XDA2.
Basically i have a UK XDA2 and of corse i getthe ID error if i run the upgrade, i dont understand very well how to change the ID part so could i just make the SD card with the rom on it and follow your instructions to recover a dead XDA2
Thanks
John
What should I do when I want to upgrade/downgrade...
I have the T-Mobile 1.72WWE rom installed.
Everything works ok for now, no problems.
But do I need to do when I want to upgrade/downgrade?
I don't have a second device so thats not an option
Please advise.
Thanks
To cairo31male!!
NOP!! Can't HELP!! Maybe the BOOTLOADER got the diffrent version? Mine is 1.03. Can u tell me how to upgrade the bootloader to 1.06?
And you mentioned about OLD version, what do you mean by that?
@hcnsoft:
The 2 solutions described above are for XDA 2's which have been screwed up by installing / uninstalling the latest beta version tmob 1.72. If this is your situation, and you have a working bootloader, both solutions should work for you.
@SEB152030:
The beta we have is 1.72, which caused all these problems. If you have another working device, as described in solution 1, you can revert back to the latest working official ROM (1.66), just follow the steps decribed above and use the official 1.66 upgrade program.
@applecom:
If your XDA 2 is dead, there is no harm in trying. But basically, this SD file will only work on devices that have already been upgraded to 1.72 and then died. If it is dead because of any other reason, I suggest you stick with older stable versions and don't try to mess up with 1.72 for now, until the developers come up with a simple tool to go back and forth between different roms. You can flash SD images that were made from other working devices that have your same model/language. You wouldn't get any errors that way.
@Panja:
Since your device is working, I suggest you wait a couple of days, before trying anything. The developers might come up with a simpler solution. If you absolutely have to downgrade, you can follow the solution 1 described above, but you will need another working device for a few minutes. Use the other working device which has the old ROM installed and start the OLD ROM installation software, then plug in your device with the 1.72 ROM AFTER you get the different versions dialog with the button "UPGRADE".
@Ivan-R: which method are you tying? Solution 1 or 2? FOr the first solution, I guess it should work. For the SD flashing, I beleive you should have Bootloader 1.06. How to get that one, I don't know, but I strongly advise against it, untill all this matter is clear, as each new version of the bootloader implements stricter security, which will make it harder to customize in the future.
OLD version means any version before 1.72
cairo31male said:
@hcnsoft:
@Ivan-R: which method are you tying? Solution 1 or 2? FOr the first solution, I guess it should work. For the SD flashing, I beleive you should have Bootloader 1.06. How to get that one, I don't know, but I strongly advise against it, untill all this matter is clear, as each new version of the bootloader implements stricter security, which will make it harder to customize in the future.
OLD version means any version before 1.72
Click to expand...
Click to collapse
I already try BOTH solution!! Solution 1, i try with ROM 1.03.11, which is thats the basic ROM. Solution 2, the RESULT is Not Allowed UpDate!!
So i guess this is the matter of BOOTLOADER!! Yours is 1.06 and me 1.03. THATS THE PROBLEMO NOW!! Now... How about upgrade the BOOTLOADER??
[email protected]#$!%G FREAK ROM!! :evil:
Mas Ivan,
Sebaiknya anda jangan menggunakan sd image yang di upload karena masih beta untuk menghindari kesalahan pada rom 1.72
thanks cairo for the info, my xda is working with the standard rom, Our only problem is me and the guy that got the rom in the first place would like to use it but we cant
anyway thanks for youe info
John
Solution 1
Solution 1 don't work for me because (I think) 2 version of bootloader 1.03 and 1.06.....
I found a solution : Here
Radio Stack Downgrade
I loaded the 1.72 Beta and would like to keep it, but the Radio Stack is horrible for me. I need to go back to the O2 launch version of the radio stack. I noticed in the O2launch Rom that the contents of the exe file included Radio.nb while the 1.72 exe contained Radio.nbf.
Is it safe for me to try and downgrade only the radio stack and if so should i use the launch version of himalaya upgrade or the 1.72 version of himalaya upgrade to install the launch radio.nb file?
Can anyone give me some advice here? My radio is barely functional. can't find networks where i know there is coverage. Thanks for any advice.
Re: Radio Stack Downgrade
watchdogsdg said:
I loaded the 1.72 Beta and would like to keep it, but the Radio Stack is horrible for me. I need to go back to the O2 launch version of the radio stack. I noticed in the O2launch Rom that the contents of the exe file included Radio.nb while the 1.72 exe contained Radio.nbf.
Is it safe for me to try and downgrade only the radio stack and if so should i use the launch version of himalaya upgrade or the 1.72 version of himalaya upgrade to install the launch radio.nb file?
Can anyone give me some advice here? My radio is barely functional. can't find networks where i know there is coverage. Thanks for any advice.
Click to expand...
Click to collapse
Go go go... Just downgrade it!! 8) Then you will join me in HERE!! Huahahahaha... You are STUCK for the REST OF YOUR LIFE!!
Didn't have any trouble downgrading
I just upgraded to 1.72 last week...hated it...gprs was WAY too slow. Today I downgraded and crossed my fingers back to Xda_II_Upgrade_v16050.exe (filename..not sure where i got it).
IT WORKS!! everything went fine and is fine.
I think my bootloader said it was something like version 1.01 (very hard to read that screen without the backlight) So I'm guessing this downgrade problem may be specific to bootloader versions.
No expert, just letting you know what i did.
This site is amazing. Thanks for everything.
Re: Didn't have any trouble downgrading
mkriemersma said:
So I'm guessing this downgrade problem may be specific to bootloader versions.
No expert, just letting you know what i did.
Click to expand...
Click to collapse
I AGREE WITH YOU!! BOOTLOADER thang'!! I am not EXPERT too, but I REALLY NEED SOME HELP HERE!!
Hi,
Thanks for all help!
I have a dead unit due to 1.72 ROm.
Itried to fool the himalya upgrade program with a soft reset as suggested in another thread, it works It gets trough the device id but stops when erasing rom, any suggestion?
Is there anyone out ther that can disassamble the himalyprogram and
make a small program without error checking?
I also have bootloader 1.06 and tried also "ntrw write ROM.nb1 H:"
It works writing the image but my bootloader don´t loads any rom.
Tried with 2 differnet SD cards, and soft reset, hardreset, and only pushing camera button, without succes, what is the right command?
Any more suggestions?
@nilron:
Press ARROW KEY (any direction on joystick) + POWER Button + SOFT RESET, all together, then wait a little. You should get instructions to press POWER to start flashing.
My friend just got the hermes running the crossbow os, would someone tell me how to dump the rom out? Need urgen reply cause he will leave hong kong tomorrow.
First try Buzz's rom dumper. It's available here
There are reports that it won't work which may be related to the Hermes microSD slot. I'd try the miniSD version of Buzz's pgm first.
There are various ways to dump the ROM from a live device, I don't know which one will be the most reliable or will be more helpful to reconstruct the ROM after the dump, so if possible dump the rom in all methods explained here:
1) itsutils pdocread, as explained in the WIKI:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
This is IMHO the most reliable method, first use 'pdocread -l' to list all partitions, then dump ALL them in "raw" files. Feel free to ask if you need help or are unsure in any of the steps.
2) As Sleuth255 suggested, you can also try grab_it! tool from buzz, but I don't know if it will work or not.
3) There is also mamaich's TestWM5.exe, which dumps files and modules to SD card, but I think the dump will not be useful for creating a valid imgfs after, anyway try this method too.
4) It will be also useful if you dump the bootloader on this device: Run gnuharet.exe on the device, then telnet to port 9999 and issue this command: 'pwf splfile 0x30000000 0x40000' in gnuharet.exe
This will dump the running SPL in a file called "splfile" in the folder where you run gnuharet from. It will probably be corrupted by wince usb host buffers, but anyway will be useful too.
Good luck and feel free to ask if you have problems
Suspense is killing me... did we get a dump?
Also please, put the Hermes in bootloader mode (side ok + power button + softreset with stylus) and tell us exactly the IPL and SPL version you see in the tri-color screen. Probably we can investigate how to dump rom parts from bootloader using 'rbmc' command in mtty.
tsuishui said:
My friend just got the hermes running the crossbow os, would someone tell me how to dump the rom out? Need urgen reply cause he will leave hong kong tomorrow.
Click to expand...
Click to collapse
Any progress? Im all tingles here, my wife thinks im crazy...lol cannot wait to get my hands on this one...(and i dont mean my wife)
This should be interesting if he actually gets it
It is as follows
HERM100
IPL-1.00
HERM100 MFG
SPL-1.02
Ok, i will wait a while and I will provide you the commands to dump the ROM from bootloader. Meanwhile download HHD Usb Monitor trial version, and install it.
pof said:
Ok, i will wait a while and I will provide you the commands to dump the ROM from bootloader. Meanwhile download HHD Usb Monitor trial version, and install it.
Click to expand...
Click to collapse
Any idea what the chances are to create a working rom out of this?
I am out of computer right now so i will try to dump the rom later today and my friend tells me that this device is come from microsoft. Also it is the rom from t-mobile.
great news today!
Now I really can't wait for this
http://msmobiles.com/news.php/5846.html
darkjedi said:
Now I really can't wait for this
http://msmobiles.com/news.php/5846.html
Click to expand...
Click to collapse
nice tease...guess i put it up for discussion in our Hermes meeting tomorrow..
Well lookey here! M$ also released a version that runs on the HTC Wizard. The Wizard was their preferred device at MEDC 2006.
I'm really wondering why they called it WM6.0 instead of SE or 5.5...
POF and other more intelligent people than me - if we do get this ROM I am more than happy to act as a guinea pig for this!! I have 2 days off work and a brand new Hermes to mess around with!
LOL I'm sure everyone will want to be a guinea pigs for this
darkjedi said:
I'm really wondering why they called it WM6.0 instead of SE or 5.5...
Click to expand...
Click to collapse
possibly marketing...
Getting the ROM dump is only the first (most important) part. Next the talented folks here at xda developers will need to convert it to a flashable image. The Hermes architecture presents unique challenges here. I'm sure having this dump on the FTP site will add even more incentive to this effort which will also result in our ability to cook our own ROMs....
I brought Cingular 8525 off Ebay over a month ago and love it. I like experimenting things to improve and learn of this website about upgrading your Hermes to make it better than stock version provided by your carrier. I have been reading this forum for almost a month now since I got this 8525 and wanted to dive into it but I would like someone to confirm the step I am plan on doing is the way to go with least risk of bricking my pda. I understand there always a risk of bricking it but I want the least risk as possible =P
From reading this forum and wiki I learn that I should do this steps but correct me if I missed a step or doing something in wrong order.
1) Since I am going to use Hard SPL I don't need to SuperCID my phone and just download Hard SPL Hard-SPL-V2.zip at http://forum.xda-developers.com/showthread.php?t=296722 and flash it using usb port on a xp with activesync installed.
2) Download Radio 1.38 without gps HERM_RADIO_1.38.00.10_Only_SSPL.rar at http://forum.xda-developers.com/showthread.php?t=297925 and flash it the same method above via usb and activesync.
3) Test phone make sure everything working after 2 flashes.
4) Download WM6 ROM (I am leaning toward MWVI Black Edition v1.2) Windows_Mobile_VI_-_Black_Edition_v1.2_(Release_22-03-07_GMT+10_4am).exe at http://forum.xda-developers.com/showthread.php?t=298936 and flash it the same step as above via usb and activesync.
This part I am lost on is the statement on that forum -> "To install, run the (.exe). This will automatically push Des's SSPL to your phone although if you have security enabled then you will need to answer "Yes" to the dialogue when it appears on your phone."
Do I need to answer yes because I have Hard SPL install or is it going to overwrite my Hard SPL with Des's SSPL? I am lost about that one and wasn't sure on this.
5) Download cabs to restore Cingular data and mms settings at http://forum.xda-developers.com/showpost.php?p=1163312&postcount=1 and install it on phone.
6) Download Cingular Keyboard layout fix and install.
Also I am thinking of skipping step 2) - Radio upgrade also 4) - MWVI ROM upgrade and instead go with LVSW Edition at http://forum.xda-developers.com/showthread.php?t=298809 which came out yesterday and since it come with Radio 1.34 and are there any steps I need to do with SPL or it will flash fine with Hard SPL? then resume step 5) and 6)
In the future if I want to get a new pda and sell this one, all I need to do is download stock ROM from Cingular and flash it back on my 8525 then it should be back to the state it was like when I brought it overwriting or removing the Hard SPL and Radio and OS?
Thank for your inputs and help!
Bill
1234567890
... answer, "yes". It's just a warning/message, that's all. Sounds like you have a handle on everything else. Just go for it (and be sure to keep your eyes open).
TechBill said:
This part I am lost on is the statement on that forum -> "To install, run the (.exe). This will automatically push Des's SSPL to your phone although if you have security enabled then you will need to answer "Yes" to the dialogue when it appears on your phone."
Do I need to answer yes because I have Hard SPL install or is it going to overwrite my Hard SPL with Des's SSPL? I am lost about that one and wasn't sure on this.
Click to expand...
Click to collapse
SSPL stands for SoftSPL, so no, it won't overwrite Hard-SPL. It will run 1.09.des bootloader on your device for the duration of the flash, then you'll be back to whichever SPL you had before you started. If you don't have security turned off on your device (most don't), you'll have to answer 'Yes' when SSPL is pushed to your device because it's unsigned code. It has nothing to do with being Hard-SPL.
Whether or not you'll overwrite Hard-SPL with your flash depends whether the ROM you are flashing also contains SPL (and what version it is). Best to know exactly what you're flashing before you do.
The rest of your plan looks good to me, especially step 1 being to flash Hard-SPL. While nothing can "innoculate" your device from a brick (i.e., sh*t happens), Hard-SPL does give you a way out if a flash goes south on you.
Watch the Cingular settings cabs... I've had some issues with them. I prefer to set things up manually after a hard reset, but that's just my experience. They work fine for others.
Also, IMHO the newer radios work better with WM6. The combo shown in my sig runs beautifully for me (but, as always, your mileage may vary!).
i am on a cingular 8528 and i am looking fo rthese 2 cab files.
WM VI Black Clean Icon Patch.cab
Cingular 8525 keyboard CAB
i am in a huge rush so can someone point out where tehy are? thank you in advance!
Eric
TechBill said:
1) Since I am going to use Hard SPL I don't need to SuperCID my phone and just download Hard SPL Hard-SPL-V2.zip at http://forum.xda-developers.com/showthread.php?t=296722 and flash it using usb port on a xp with activesync installed.
Click to expand...
Click to collapse
Yep
TechBill said:
2) Download Radio 1.38 without gps HERM_RADIO_1.38.00.10_Only_SSPL.rar at http://forum.xda-developers.com/showthread.php?t=297925 and flash it the same method above via usb and activesync.
Click to expand...
Click to collapse
Yep
TechBill said:
3) Test phone make sure everything working after 2 flashes.
Click to expand...
Click to collapse
If you wish
TechBill said:
4) Download WM6 ROM (I am leaning toward MWVI Black Edition v1.2) Windows_Mobile_VI_-_Black_Edition_v1.2_(Release_22-03-07_GMT+10_4am).exe at http://forum.xda-developers.com/showthread.php?t=298936 and flash it the same step as above via usb and activesync.
Click to expand...
Click to collapse
Looking good
TechBill said:
This part I am lost on is the statement on that forum -> "To install, run the (.exe). This will automatically push Des's SSPL to your phone although if you have security enabled then you will need to answer "Yes" to the dialogue when it appears on your phone."
Do I need to answer yes because I have Hard SPL install or is it going to overwrite my Hard SPL with Des's SSPL? I am lost about that one and wasn't sure on this.
Click to expand...
Click to collapse
Hard SPL is only there to help recover your device if it gets bricked during a flash. The security is OS dependant and only requires you to click yes when SSPL is pushed to your phone as it indentifies it as an untrusted source. This will probably happen when you install the Radio upgrade as well. SSPL is only a temporary psuedo bootloader and will not overwrite Hard SPL or any other bootloader on your device.
TechBill said:
5) Download cabs to restore Cingular data and mms settings at http://forum.xda-developers.com/showpost.php?p=1163312&postcount=1 and install it on phone.
Click to expand...
Click to collapse
Unsure if those settings will work, maybe a cingular user can confirm this. If in doubt copy down your MMS and data connection settings and input them manually after OS upgrade.
TechBill said:
6) Download Cingular Keyboard layout fix and install.
Click to expand...
Click to collapse
Great!!
TechBill said:
Also I am thinking of skipping step 2) - Radio upgrade also 4) - MWVI ROM upgrade and instead go with LVSW Edition at http://forum.xda-developers.com/showthread.php?t=298809 which came out yesterday and since it come with Radio 1.34 and are there any steps I need to do with SPL or it will flash fine with Hard SPL? then resume step 5) and 6)
Click to expand...
Click to collapse
Ok, if you decide to go for the LVSW ROM then download the OS only repack that is posted somewhere in that thread (not the one thats in the 1st post). The reason for this is because it includes a bootloader that will overwrite Hard SPL. Just download OS and replace with Black Edition noted in step 4.
TechBill said:
In the future if I want to get a new pda and sell this one, all I need to do is download stock ROM from Cingular and flash it back on my 8525 then it should be back to the state it was like when I brought it overwriting or removing the Hard SPL and Radio and OS?
Click to expand...
Click to collapse
Shouldn't be a problem
TechBill said:
Thank for your inputs and help!
Bill
Click to expand...
Click to collapse
No problem, nice to see someone do a bit of research for a change.
S.K.
EDIT: LOL!! Deleted my first post to create a nice lengthy reply and other ppl have beaten me to it now.... *cries*
The Cingular settings worked for me to access the internet and mms!
thasiccest13 said:
i am on a cingular 8528 and i am looking fo rthese 2 cab files.
WM VI Black Clean Icon Patch.cab
Cingular 8525 keyboard CAB
i am in a huge rush so can someone point out where tehy are? thank you in advance!
Eric
Click to expand...
Click to collapse
Hey pal, the search function works really fast on this forum. Try using it for a change instead of cluttering threads with your "I'm in a huge rush" nonsense. You're not the only one on this planet that's busy.
WM VI Black Clean Icon Patch.cab
Can i use this if i am using the LVSW Edition
thank you,
Eric
vp3G said:
Hey pal, the search function works really fast on this forum. Try using it for a change instead of cluttering threads with your "I'm in a huge rush" nonsense. You're not the only one on this planet that's busy.
Click to expand...
Click to collapse
First off i hate being called PAL, but thats ok.... i did search BUT i can not find it! i found 2 links that were not in use anymore, so i could not download, instead of making a nasty reply why even reply at all?
I am new and i do this for fun, just like everyone here, so relax and have a good time!
Eric
thasiccest13 said:
First off i hate being called PAL, but thats ok.... i did search BUT i can not find it! i found 2 links that were not in use anymore, so i could not download, instead of making a nasty reply why even reply at all?
I am new and i do this for fun, just like everyone here, so relax and have a good time!
Eric
Click to expand...
Click to collapse
You hate being called PAL? What about SECAM?
OK, seriously though, the Black Edition patch was designed for the Black Edition, it's probably not a good idea to use it on the LVSW ROM.
The search function can be pretty crappy at times, which is why you can search the forums using Google instead. I think that changing the registry yourself is better anyway because then you know what you're doing...
Wow thank you everyone for your replys!!
I am still undecide which OS ROM to go with.. Both look great!
Bill
TechBill said:
I am still undecide which OS ROM to go with.. Both look great!
Click to expand...
Click to collapse
You could try both if you want to. That's one of the benefits of this community. You can actually *choose* what you want, and then have the option to change your mind as many times as needed!
thasiccest13 said:
First off i hate being called PAL, but thats ok.... i did search BUT i can not find it! i found 2 links that were not in use anymore, so i could not download, instead of making a nasty reply why even reply at all?
I am new and i do this for fun, just like everyone here, so relax and have a good time!
Eric
Click to expand...
Click to collapse
Ok SPORT (better?), perhaps you're totally oblivous to the fact you hijacked the OP's thread as if your woes take precendence over anyone else's. But oh, that's right... "you're in a rush".
Not "being nasty", just asking that you demonstrate a modicum of respect for the forum.
Upgrade was a success!
I went with Black Edition and I must comment it got nice Splash screen and today screen! I was a little worried it was going to be gothic looking screen but it wasn't and it is a very nice looking screen and setup and seem to be easier on the eyes too.
Thank you for all your inputs and feedbacks!
I entered the Cingular WAP setting manually and use a cab to fix the keyboard layout then uninstalled the cab so it wouldn't be in my Remove Program box.
Bill
Congrats!
TechBill said:
Upgrade was a success!
Click to expand...
Click to collapse
Congrats on no longer being a flashing virgin! Watching that radio flash creeeeeep along is a real nail-biter the first time, isn't it?
Thanks for this post! These were the same questions I had!
vp3G said:
Congrats on no longer being a flashing virgin! Watching that radio flash creeeeeep along is a real nail-biter the first time, isn't it?
Click to expand...
Click to collapse
OH yeah you got that right! The Radio flashing was exactly what you said. A real nail biter, there was moment when I thought my phone is screwed then it would jump another 4% or so in the status bar then another long pause.
But it was an awesome learning experience for me and now I feel more comfortable upgrading my pda.
Trancecoder said:
You hate being called PAL? What about SECAM?
OK, seriously though, the Black Edition patch was designed for the Black Edition, it's probably not a good idea to use it on the LVSW ROM.
The search function can be pretty crappy at times, which is why you can search the forums using Google instead. I think that changing the registry yourself is better anyway because then you know what you're doing...
Click to expand...
Click to collapse
Really I am having problems with the search function in this site too. I'll try google as mentioned.
So you want to try some ROM other than the shipped ROM for your Athena!
What Do you need to know?
Backup
You should also know that doing this will usually wipe all the info off your phone(except the microdrive and SD card)
So it is important that you learn to backup any info that you want to keep.
I suggest using pimbackup and I usually back up MyDocuments by syncing with your computer or even copying it to your SD card.
I do this as a routine everytime I fiddle with my ROM so I can return to the previous state.
I also use Sprite Backup as well.
Remove Sim/Sd card
Next , make sure you remove your SD card and simcard before proceeding to apply Olipros unlocker
Unlock
Well you have to unlock your ppc to accept a new ROM.
I haven't done this for a while , but fortunately the process has been made easy by Olipro in this thread
http://forum.xda-developers.com/showthread.php?t=315831
and in german in this thread
http://forum.xda-developers.com/showthread.php?t=378216
Check Bootloader Screen
Throughout this forum you will be referred to your SPL.
This is the Secondary Program Language and on your unadulterated ppc it will be 1.1
Olipro's original unlocker upgraded this to 1.1x but the unlocker above will change it to SPL 1.2
You can see if this has already been done by putting your phone into the Bootloader screen.
This is done by holding the camera button completely in and then pressing the reset button.
You will now see a red/green/blue and white striped screen telling you the device id and SPL version.
If you see SPL 1.2 , you are good to go to load any SPL 1.2 Rom.
Activsync/Windows mobile device centre.
You need this program to apply updates to your ROM
There used to be a problem with earlier versions of these programs not recognising WM6 ROMS.
This problem is easily solved by updating these programs
Upgrading Radio
No there is no FM radio on the Athena, this refers to the operating System radio that operates the phone/wifi/gps etc
This is important to know as AP4 needs at least radio 1.50 (and maybe WM6.1roms)
Upgrading the radio proceeds the same way as a rom upgrade
version1.58 is here http://forum.xda-developers.com/showthread.php?t=409271
version1.57 is here http://forum.xda-developers.com/showthread.php?t=372904
Where to find a ROM
Fortunately Sergiopi has collected and sorted them here
http://forum.xda-developers.com/showthread.php?t=397518
Walk me through the Process
1.backup data
2.remove sim and SD card,apply hard reset and wait till full initialization complete before connecting to pc.
3.establish Activsync connection
4.ensure no background program running, antivirus, firewall and etc. before executing flash command.
5 start the unlocker and follow the instructions.
6.reboot phone and make sure you still have activesync
7.**Update the ROM to an SPL appropriate rom according to what appears on your bootloader screen**
following the above protocol
Great!
Now you should have a new ROM to play with!
And play with it you should !
But I want to try an SPL3.5 ROM!
OK if you got this far You should be able to do this.
**First step is to install AP4**
At the moment there is only 1 foolproof way to do this and this is to use the Athena Updater
But first read the upgrade Guide Please Here http://www.htc-hackers.com/uploads/AP4_How_To_1.8.pdf
It is very detailed and I recommend following it exactly !!
This is the link to the athena Updater
http://forum.xda-developers.com/showthread.php?t=387409
Now I want to go back to SPL 1.2
Ok. this is possible
see here http://forum.xda-developers.com/showthread.php?t=405604
Need to know more or Stuffed the Flash?
Don't worry , nearly everyone here has made a mistake but been able to recover.
Read the wiki and/ or search the forum
If you have any suggestions to change What I have written ,post a reply.
Advanced:SD Card Flashing
Rather than using Activesync/WMDC it is possible to flash using the SD Card
from the athena Wiki (a good source of info)
"Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD. After finished, do a soft reset."
this doesn't work with SDHC cards .
reserved 2
Thank you very much,
Because the knowledge in this community is so high, sometimes pleople like me are afraid of writing some type of questions.
This way it will be easy.
"Sticky" please.
fantastic, a thread like this should be made part of the sticky topics!
cheers
Beautiful guide
Yes, is special for a noobs like me and others nice guide thanks.
bump
may help stop a few questions
thanks 1000000 times
now i won't be afraid of upgrading my athena
This really should be made a sticky.
I know when I first visited this forum, it was overwhelming. So many bits of pieces of info everywhere. Very hard for a new person to come in and make sense of it all.
Great guide lakeman.
Unlock Advantage x7501
Hey. I bought an unlock advantage X7501 windows 6.0 professional to HTC company last year. I can not watch videos on internet and you tube. What should I do? Please help me. Thank you
Maencaru said:
Hey. I bought an unlock advantage X7501 windows 6.0 professional to HTC company last year. I can not watch videos on internet and you tube. What should I do? Please help me. Thank you
Click to expand...
Click to collapse
you need to learn a few skills like reading the wiki and then doing a search of the forum.
also this question has nothing to do with the title of this thread.
The problem you talk about is not confined to the X7501 and i refer you to a sticky in this thread http://forum.xda-developers.com/showthread.php?t=387986
At the top of the forum is a new section called question and answers and I suggest you look there as well
I had unlocked my device and upgraded radio version to 1.58. Different Roms tested , last was Michy 5.1.
For variuos reason I had to reinstall the Original HTC Rom and again everything was working succefully.
Now I would like to reinstall Michy Rom 6.1 and once I enter the bootloader the screen is showing:
ATHENE 100 IPL-v1.00 ( standard)
as well as one line below
ATHENE 100-SPL-v1.20 Olipro
In order to avoid to brick my device my question is:
I can flash the Michy Rom straight or I still have to repeat the unlock procedure since the beginning again?
Thanks and regards
chevyc5ls1
chevyc5ls1 said:
Now I would like to reinstall Michy Rom 6.1 and once I enter the bootloader the screen is showing:
ATHENE 100 IPL-v1.00 ( standard)
as well as one line below
ATHENE 100-SPL-v1.20 Olipro
Click to expand...
Click to collapse
You can only flash SPL 1.2 ROMs and last time I looked Michy 6.1 was only SPL3.5.
You would need to upgrade to AP4 first as outlined in my first post
lakeman said:
You can only flash SPL 1.2 ROMs and last time I looked Michy 6.1 was only SPL3.5.
You would need to upgrade to AP4 first as outlined in my first post
Click to expand...
Click to collapse
Indeed for the time being Michy 6.1 is for Spl 3.5.
Thanks a lot for Your support
ciao
chevyc5ls1
lakeman said:
Rather than using Activesync/WMDC it is possible to flash using the SD Card
from the athena Wiki (a good source of info)
"Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD. After finished, do a soft reset."
this doesn't work with SDHC cards .
Click to expand...
Click to collapse
Can you do the same thing from the microdrive?
kramerica2 said:
Can you do the same thing from the microdrive?
Click to expand...
Click to collapse
not that I am aware of
update rom and radio
Can someone help me? I have updated my dell axim rom many times but in the case of athena (u1000) i am afraid to do it because it is also a phone. I am not sure whether the radio 1.58 is applicable world wide mobile phone network or is it just in the united states. I live in Malaysia and we have several mobile phone network providers like digi, celcom and maxis.
Also should the radio be updated first or the rom first? Thanks
cphilip said:
Can someone help me? I have updated my dell axim rom many times but in the case of athena (u1000) i am afraid to do it because it is also a phone. I am not sure whether the radio 1.58 is applicable world wide mobile phone network or is it just in the united states. I live in Malaysia and we have several mobile phone network providers like digi, celcom and maxis.
Also should the radio be updated first or the rom first? Thanks
Click to expand...
Click to collapse
Radio 1.58 works everywhere as far as I know and is not carrier specific.
I could not get mms to work.
You need to upgrade to radio 1.5 at least to load AP4 and I think people had troubles if they used an earlier radio with WM6.1 roms.
So I guess it would be best to upgrade the radio first.
Thanks
Thanks lakeman,
Thanks for your clear clarifications about the radio updates and the AP4 Roms.
i am beginning to feel confident again about updating my u1000. I have read so much about michy's rom and a few others. The official rom in my device is stable but might be a bit slow if i were to compare to my axim x51 using the latest L11 rom from Lenny.
The joy of having responsive roms made me reluctant to sell of my dell axim even though I am using my u1000 most of the time now. I wonder if anyone had sold off their previous axim after using u1000 (athena x7500) and regretted.
But if i must use my u1000 which has features that no other ppc has namely the large screen, i would like to have better roms than the official roms.
Thanks to all here who have contributed so much to improve the athena!
lakeman
your instruction seems the most easy to follow (at least for me)
So i am itching to try upgrading my dopod u1000 here in malaysia.
So if i just want to upgrade the radio 1.57/58
I have to
1. do the unlocking using olipro (3 steps)
2. remove sd card and sim
3. connect to pc using activesync
4. install the radio and
5. hard reset (will be done automatically)
CORRECT?
If i want to upgrade to a say michy rom
1. do the unlocking (3 steps)
2. remove sd and sim
3. connect to my notebook (activesync)
4. install radio
5. hard reset
6. connect to notebook (activesync)
7. click on the say michy new rom installer on notebook
8. follow til the end
9. hard reset (automatically will be done)
10. NEW UPGRADED ROM!
Am i correct?
Thanks!!!
(Any recommendations regarding ROMS for a start if a newbie like me wants a the fast u1000 but as plain as possible so that i can choose what to install later?)
I bought a used nokia lumia 800 yesterday and everything goes fine!!! Except one thing!
When i go to marketplace and try to download something it says that something goes wrong and i have to restart marketplace or mobile!
I have done it but nothing...
The error code is 805A0190!
I cannot solve it after many hours trying...
The mobile has bootloader and has some programs from the forum (WP7 tools, WM device center, winTT, file deployer, Ds supertool which i dont know and understand anyone of these programs) and i think the problem has to do with that,
I ask for help if anyone knows...Thanks!!
similar problem
I have similar problem but my error code is a little bit different: 805a0194. Could not find any solution.
dredman0 said:
I have similar problem but my error code is a little bit different: 805a0194. Could not find any solution.
Click to expand...
Click to collapse
And what are u doing about downloading apps?
You download from the marketplace from Internet explorer??
Any other ideas???
There is apparently a problem with the Marketplace at the moment (something to do with certificates) so maybe it's to do with that?
Link explaining the problem
I hope...But in my case i cannot download any app!! I tried so many...
So i dont know...
JohnyMontana said:
I bought a used nokia lumia 800 yesterday and everything goes fine!!! Except one thing!
When i go to marketplace and try to download something it says that something goes wrong and i have to restart marketplace or mobile!
I have done it but nothing...
The error code is 805A0190!
I cannot solve it after many hours trying...
The mobile has bootloader and has some programs from the forum (WP7 tools, WM device center, winTT, file deployer, Ds supertool which i dont know and understand anyone of these programs) and i think the problem has to do with that,
I ask for help if anyone knows...Thanks!!
Click to expand...
Click to collapse
I had this issue using a custom cooked rom that used ultrashots full unlock and flashed it onto my lumia. Everything works ok as long I did not update to Tango.
After the helpful advice from ultrashot to change a file in the unlock-package and recook and reflash averything is ok. So your lumia one of the rare one's with a full unlock, cause you have WP7 Root Tools in it and functional.
this is what ultrashot recommends to change when cooking a full unlocked tango rom and it works in my case
Code:
Hi.
You must use uZMF_Serv.dll from Dynamics 1.21. I am not providing any packages - just get my rom and unpack it. Original file will lead to working Marketplace but not working XBLive games.
Next unlock won't need this patch.
If you never cooked a rom, send me a pm, I'll share my own. Then you'll have to flash it onto your device.
2. way, but not tested:
I'll never tried if it is possible to copy the file in question onto the correct folder, but I doubt, that it remains a reboot. If you do not know, what all this is for: sell your phone here to someone needing the unlockable version and buy a not unlockable phone, so your problem is solved, because it is caused by the unlock.
(I'll guess that the price earning while selling a so called qualcom-bootloader nokia lumia is higher then the falling prices for new lumias with dload-bootloader)
Regards
Donpromillo
Don I didn't understand anything!!! What do u mean by saying cook a rom or reflash...???
And what i have tbdo to try to fix it/???
Also i have seen that u can make it t stock rom!!
So why i have t sell it/???
JohnyMontana said:
Don I didn't understand anything!!! What do u mean by saying cook a rom or reflash...???
Click to expand...
Click to collapse
Thats the reason, because I advised you to sell it.
If you don't know how to flash your lumia to another custom rom or to a stock rom, you should read here or in the developer-forum . If you feeling able to do the mentioned steps to flash (and keeping in mind, that there is a ability to brick the phone, if you fail) I can support you with a functional rom, that remains the unlocked status of your phone. Theres no other way I see to overcome your error with marketplace as flashing another rom, cause there is a wrong library in the rom, your seller flashed before he sells the phone.
Regards
I had an android phone before that and i know about flashing roms and such things (basics) but with the new one wich has windows im not experienced ...
If u can plz show me one good rom for flashing and the ways...
thanks
Hi,
All,you need to know is written in the threads I mentioned in my last post. I prefer the Linux dd method, other like the Nokia care suite method, I think it depends on your Linux skills, which U use If you do not need the unlock, use navifirm to download a stock rom, you can open the largest .esco file with a unzipper and use the image file in it as your flash rom. Here at xda are several manuals and howto's about.
If you like to remain unlock, use some of the custom roms in the lumia 800 dev thread here at xda.
Regards
donpromillo said:
Hi,
All,you need to know is written in the threads I mentioned in my last post. I prefer the Linux dd method, other like the Nokia care suite method, I think it depends on your Linux skills, which U use If you do not need the unlock, use navifirm to download a stock rom, you can open the largest .esco file with a unzipper and use the image file in it as your flash rom. Here at xda are several manuals and howto's about.
If you like to remain unlock, use some of the custom roms in the lumia 800 dev thread here at xda.
Regards
Click to expand...
Click to collapse
Ok i will check it out and i will inform u!! (now i dont have the time for research cause my work)...Thanks very much!!!
donpromillo said:
Thats the reason, because I advised you to sell it.
If you don't know how to flash your lumia to another custom rom or to a stock rom, you should read here or in the developer-forum . If you feeling able to do the mentioned steps to flash (and keeping in mind, that there is a ability to brick the phone, if you fail) I can support you with a functional rom, that remains the unlocked status of your phone. Theres no other way I see to overcome your error with marketplace as flashing another rom, cause there is a wrong library in the rom, your seller flashed before he sells the phone.
Regards
Click to expand...
Click to collapse
you suggested to read to a post to find about reflashing to stock but in this post I cannot find anything about stock for lumia 800, can you kindly show me the way to reflash into stock...;;
donpromillo said:
I had this issue using a custom cooked rom that used ultrashots full unlock and flashed it onto my lumia. Everything works ok as long I did not update to Tango.
After the helpful advice from ultrashot to change a file in the unlock-package and recook and reflash averything is ok. So your lumia one of the rare one's with a full unlock, cause you have WP7 Root Tools in it and functional.
this is what ultrashot recommends to change when cooking a full unlocked tango rom and it works in my case
Code:
Hi.
You must use uZMF_Serv.dll from Dynamics 1.21. I am not providing any packages - just get my rom and unpack it. Original file will lead to working Marketplace but not working XBLive games.
Next unlock won't need this patch.
If you never cooked a rom, send me a pm, I'll share my own. Then you'll have to flash it onto your device.
2. way, but not tested:
I'll never tried if it is possible to copy the file in question onto the correct folder, but I doubt, that it remains a reboot. If you do not know, what all this is for: sell your phone here to someone needing the unlockable version and buy a not unlockable phone, so your problem is solved, because it is caused by the unlock.
(I'll guess that the price earning while selling a so called qualcom-bootloader nokia lumia is higher then the falling prices for new lumias with dload-bootloader)
Regards
Donpromillo
Click to expand...
Click to collapse
can u plsss share that cook thing with me so tht I can flash it onto my lumia...i myself is facing tht problem....my email id is [email protected]
kunhi123 said:
can u plsss share that cook thing with me so tht I can flash it onto my lumia...i myself is facing tht problem....my email id is [email protected]
Click to expand...
Click to collapse
I'll send you a pm after uploading the files. First flash the sd3_lumia_12220 to partition sd[x]3, after successful done, flash the Lumia_800_12220_8773_full_unlock_with_marketplace.nb to partition sd[x]9.
Regards
Donpromillo
I also had the same problem, I was looking for a solution and ran into a type of solution to this problem. type it is necessary to synchronize your data in the settings. mail + accounts, then I read the type I wrote it is necessary to disable the automatic date + time. but nothing helped. Yadazhe how many times I flashed my Lumia 625 phone through Windows Device Recovery Tool/ total 0
Hello j have a Lumia 640 and j have problem with store error 805a0190. Can anyone tell me a solution for this error in steps.
Or j by a new phone