Hi Mods and all
I am new in this forum .... and new with PDA in general ,.. although i have experience in regular cell phones ,,,
I have come up with an issue that i need help with from you guys who seem to be experts...
I have an XDA Atom which turns on upto O2 screen and freezez right there .. i tried to hard reset the phone but failed..
When i press power on and reset button .. screen asks me to press green and red key when i do it says clean boot .. and than do u want to reset your phone ? and than after that i tried to press all keys but nothing happens ,,,
I dont know wht is the problem but i think or assume that i have lost bootloader and or Rom ,,, Please help with this part
Also what tools do i use to flash what i have to flash as the PDA cannot connect with the USB becuase it is not turning on ,,, Please help with this part
Also what do i need to flash to this phone to revive it ,,,? please help with this issue ,, and where can ii download this files ,,
please explain step by step and or direct me to a link where i can geet this information
thank u in advance ,,,
Mike
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Drat. Got to this one too late. Sorry
Anyways, the Atom does have the tendency to lose track of its own extended ROM (You can actually see this happening if you use the WM5 hidden storage revealer - which ironically happens to cause the problem sometimes as well).
Symptoms include:
- A phracking long boot time (>7 minutes, seems to hang)
- Screen goes out of alignment
- Camera, Autoconfig, Equalizer don't work.
- Hard reset doesn't help.
- EXTROM info is missing from device settings (shows as blank) - tho sometimes the device works without this anyhoo.
- CMOS version is also missing (the device definitely won't work in this case)
Probable cause:
- Someone or something just tried to write to your hidden storage root. (Eh?)
Far as I know there's no method to recover other than flashing your phone again. Just one of the design flaws of the Atom, I guess...
(Yes, I feel for you. I had to solve this myself too, and I didn't want to send it in. Thankfully, this isn't a common problem. )
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
would you plz tell here which rom u used for this ????????
Well, my Atom Exec will do the same sometimes.
But the following method works everytime!!!
Take out the battery. Charge it with a charger until full !!!!
Put it back to the machine, it works every time !!!
Or you may try just charge it in the machine for a few hours and see if that works. Since I always have a spare battery charged, every time that dumb thing stuck, I just changed the battery and it waked up again.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
Hi mun66;
I've got the same problem with my Atom. But I dont know how to flash the phone like what you mentioned. Could you plz show me step by step??
Thanks,
Your ATOM Exec
edunon said:
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
Click to expand...
Click to collapse
You guys just need to go into bootloader mode before performing an upgrade. For the XDA Atom just press Power+Dpad(center)+stylus reset momentarily, and its now in bootloader mode. RUN again the Update program. If you still experience the same thing, the update file you downloaded might be corrupted. You have to download again and flash your device again.
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
wilak81 said:
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
Click to expand...
Click to collapse
You might want to send it in the the service centre for a check, just in case it's a hardware problem.. If you still face the same issue even without installing any software..
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
wilak81 said:
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
Click to expand...
Click to collapse
Do keep us posted..
I will face the same problem if i install too much programs.. I guess it's either Pocket Plus, Diary 2 which is causing my problem.. Now wondering if i should change to Atom Life, since they announce WM6... If only there's a perfect phone.
Thank God, it's working after 5x flashing but it still had bug.
I still have to take the battery off for at least 15 minutes if I try to reset the Atom.
Sure 1 thing for ATOM, IT SU**S!!!
i have a friend also has a trouble like this ,but he has solved the problem when he charged the exec. do not you have a try ?
I just picked up one of these to play with.
Mine gets by the O2 screen but if I have a few apps on it it loads the Today screen but then freezes and won't let me access anything either by hard key or screen. Soft reset just repeats the cycle.
This is with only around 4 apps loaded. One of them must be a culprit?
By the way, it came shipped with WM6.0 (ROM: WWE_RC2170507B2).
Related
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
I tried to upgrade ny Orange SPV M 600
IPL 2.10.0001
SPL 2.10.0001
with wm6_smart1_v1.3 using ROMUpdateUtility_Wizard_NoID.zip and now its not booting up it stuck up with the three color boot loader screen and i tried hard to hard reset but even after keep pressing the camera and communication button together and pressing the soft reset button with stylus for more than one minute it gave no response plz help its my friends phone and I am doomed if I cant make it up working.
If you disable the connect through USB option in ActiveSync, and then put the SPV in bootloader. Then flash it with a AKU2.2 ROM (Any will do including PV temp), then follow this: http://forum.xda-developers.com/showthread.php?t=310452.
How do i put SPV in boot loader????
AKU2.2 ROM where do i find this the link(rapidshare) which is given in thread u told is not working and plz tell me if I will have to download a new rom after that or this wm 6.0 by smart1 will work
Hold the Camera button, and insert the stylus into the larger of two holes on the edge of the SPV with the power connector.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Hardreset_bootloader
ya i tried this by reading the thread u mentioned but it puts me back on the same three color screen however I have been able to hard reset and after I press send it said formating FAT something like this
You must enter the bootloader (three colour screen), Then set ActiveSync to not connect through USB (ActiveSync->Settings->connection Settings), Plug the phone into your computer through USB, Then run any of the RUU's from any Part One of here: http://forum.xda-developers.com/showthread.php?t=308755.
Using the AKU2.2 ROM Update Utility, you should get a basic WM5 ROM. You MUST flash an AKU2.2 ROM before you flash a WM6 (AKU3.5) ROM.
Right now i am downloading this original roam from this link
ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/OrangeUK/
will this do????
Can I directly install AKU 2.20 after downloading or will I have to do anything more like putting some file in boot loader which u just said???
I dont want WM 6 anymore plz just advice in steps what I should do to get my phone up and running..............
Put the phone in bootloader, change the active sync settings, and then run the upgrade program!
Good Luck!
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
absharaslam said:
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
Click to expand...
Click to collapse
It will do no harm, and there is a high chance it will work.
The RUU is fairly self explanatory-Double click on it and do what it says. The battery charge level is not a problem, so long as there is some charge.
Thanks a lot dude it worked I am relieved now
Thanks again boss
Salute!!!!!!!!!!!!!!!!!!
Glad to hear it
If you now feel experienced enough to upgrade properly, read this thread very carefully http://forum.xda-developers.com/showthread.php?t=310452 (or at least the first post) and then this post: http://forum.xda-developers.com/showthread.php?t=308755
atleast for now i dont have courage.............
This phone belongs to my bro and currently he is out on vacation and when he will come back i thought it will be a surprise that his phone become so good anyways no risk anymore..........
may be next time on my phone only
Well atleast he shouldn't notice the change.
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
absharaslam said:
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
Click to expand...
Click to collapse
No problem. Glad to make a difference
Hi Guyz
I'm trying to upgrade my friends O2 ATOM to any new software .
the problem is that when it reaches RADIO UPDATE
it stays on 0%
PDA Screen says ( UPDATE RADIO STACK ,,,, PLEASE WAIT ... )
IF I REMOVE THE USB CONNECTION , THE ATOM STICKS ON WINDOWS SCREEN , AND SOMETIMES ON SCREEN ALIGNMENT .
i tried three different roms ad got the same result , even thru BOOTLOADER screen, it is very imbarresing , as i promised him a better performance device , now it is not booting .
hhhheeeellllppppp
pleaseeee
he is looking at me and only flames are showing from his eyes
just keep flashing the device, it fails sometimes on the first flash at the radio section, simply disconnect it and then reflash it for the 2nd time.
How long you've wait the process?
I've upgrade my atom more then 10 times and when in Radio Updates it's also not showing the progress as what you've seen.
But it doesn't mean the process is stopping. Just wait and the process will finished. (Usually in it shows the progress in your PDA screen)
Don't unplug your usb cable before it finished.
unfortunatly i had to unplug the ATOM
now it gives only one massege
UPDATE UTILITY
did i brick it ?
for me, I'd take out battery a while and then connect USB and try to flash with wm5 rom like "Xda-Atom-ENG-20060105" (you can found on this forum under "Collection of All O2 XDA ATOM ROM AKU *** (WM5(2*->3*) & WM6 (0.3*->0.7*))" post).
And then upgrade to wm6 rom by ... jiggs, homer285 & udayrulz .....
hi konanda
will this resolve the problem?
yeah, I have done alot of time to solve this problem on other xda atom also .... if you want, I'l upload this wm5 rom on mediafire ....
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Just keep flashing the device.. take a bit longer time and then will complete the updating ....
abuawab said:
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Click to expand...
Click to collapse
Allow the projected 30 mins for the update, if you plan to update via SD Card be sure to read, ALOT! good luck, oh you could have a little read in the Atom Wiki too.
could be your cable or connection?
ATOM ROM update problem
I had the same problem & tried different ways explained in this thread.
No success.
I tried with old original ROM and all new ROMs as well, it stucked on updating RADIO BURN message on computer and ATOM displays Updating RADIO STACK.
I tried removing battery and kept for some times and tried back but same result. Please anyone can help me
i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.
Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?
Thanks in advance.
max20041988 said:
i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.
Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?
Thanks in advance.
Click to expand...
Click to collapse
try to update to any WM6 or if you still want the WM5, there are a lot of ROM
's available. I had this tradgic experience aswell with o2 default ROM. Im contented with the WM6 although no a2dp support yet =)
abuawab said:
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Click to expand...
Click to collapse
i'll agree with the others, better change USB cable as well =) It could be faulty you can use cable from canon digicam/motorola phones et. al.
I would suggest reflashing the ROM with cooked ROM's available here like WM6 or WM5 if you still want to stick with it. o2 default ROM gives me a headache before. No1 rule before upgrading ROM...... Read the WIKI hehehehe
Hey guys I had the same problem, I went through the procedure as here http://forum.xda-developers.com/showthread.php?t=358442
Hope u can also flash 'OS+EBoot' part of it and then after ur Atom Exec restarts u can go in bootloader and flash the original WM5 from O2 ‘Xda-AtomExec-ENG-20060614_R060428N_EX0028.exe’.
Hi i want some advice about my problem Well im a new user of the HD2 i got it 2 weeks ago ... And now i have very big issues with it. I was browsing with the Opera on the device and the phone Froze Up i tryed everything and i restarted it... The phone started up to the HTC logo with the red ID of the product and ... i waited a while like 2 hours and i saw a post in this forum for the hardware reboot that restores the factory settings. I pressed the volume up and down buttons and i started the phone it restored all and then another problem appeared. the following message:
"This program cant boot you have low storage memory please delete something ..."
But i dont Have anything on the device memory so i cant delete anything from it ;( And the HTC sense dosn't want to start and the phone is unusable
Please someone help :[
why dont u bring it back where you bought it if u only got it two weeks ago...did u flash ur phone with any roms or is completely stock?
Well that's my other problem Because the phone is buyed from London... And i cant send it back so fast to my father to take it to Carphone Warehouse and i will have to try to fix it here ... in Bulgaria. well i have a flash memory card 2GB and i installed some software on the phone but its all gone after the reboot... and i took off the memory card so that i dont lose the files on it :[
Hmmm
Go the the HD2 Rom Development section of this forum. Check out the first post. It should have all the stickies on flashing your first ROM.
1. Get HSPL3
2. MTTY29 Flash
3. Flash a radio.
4. Flash a new rom(I love Artemis. Blazing fast and ultra stable)
You should be sorted out fine bro. It doesnt seem like a big deal
Mm I will try it but it may take some time im waiting the phone to charge fully. Because i cant do anything with the phone i cant see how much its charged allredy. And i dont think that the phone responds so well it asks me for the usb connection and i press Active Sinc and nothing happens mhm...
hmmmmmmm...
i want to fix it not to trash it xD
the memory is to low and the device can't perform anything ... and the USB dosn't want to connect :[ the phone was working great and it went to hell for 1 sec ... lol
Ah guys thanks for the help but ... It can't be fixed :[ I will have to return it to Carphone Warehouse its a technical glitch ;(
Low Phone volume after flashing rom
Hey Guys,
I flashed my phone last night with the ELEGANCIA ROM Series. All went well but now the volume on all calls are at a very low volume. I have tried to adjust the volume while on the call but the bar is at the max level.
Does anyone have any ideas on what I can do. But the way, I didn't have this problem with the stock rom and this was the very first rom that I placed on the phone.
Thanks... please help...
From Where can i find the MTTY29 Flash... i cant find the original thing, can someone give me a link :?
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290