I want to upgrade my HTC M600 with ROM "I-mate_JAMin_ESP_2130924_21309117_020720_ship" or "Qtek_S200_220736_2207116_024721_SPA", but I cannot.
ERROR (296): UPGRADE ONLY
This File cannot be used for your PDA phone
Please, get newer NBF file.
ERROR (326): INVALID COMMAND
This File cannot be used for your PDA phone
Please, get newer NBF file.
But upgrade with "Jester AKU3.3 Step1-G4" work OK.
Do not work these roms for G4 version?
Is some solution?
I´m sorry because I just read now your post but here is the answer to your problem. if you speak spanish you´ll find the answer. You need the file ROMUpdateUtility-NoVendorID.zip and follow the instructions of that post. Regards! : http://foro.todopocketpc.com/showthread.php?t=125039&page=4
Panque said:
I´m sorry because I just read now your post but here is the answer to your problem. if you speak spanish you´ll find the answer. You need the file ROMUpdateUtility-NoVendorID.zip and follow the instructions of that post. Regards! : http://foro.todopocketpc.com/showthread.php?t=125039&page=4
Click to expand...
Click to collapse
Thanks, but my problem is with G4 version.
Yes, I was talking about a G4 too! I´ve got a spanish S200, originally from Vodafone, IPL 2.15.0001 and SPL 2.20.0001 First of all I unlocked it to use a Orange SIM and several days ago I upgraded the original Vodafone ROM to the Qtek´s ROM Qtek_S200_220736_2207116_024721_SPA thanks to the instructions of the link I told you. The clue was to use the file ROMUpdateUtility-NoVendorID.zip First of all you have to unzip this file in a new carpet you wish. Of course, synchronize PC and Qtek, etc., and then run the Qtek_S200_220736_2207116_024721_SPA.exe file and find in C:\Documents and Settings\your user\Configuración local\Temp SIX FILES. Look for them better for the date to know them (important: don´t close the install windows till you copy the six files in the carpet you made first time) When you copy the six files in the carpet (when the system ask you say that you don´t want to write on the original romupdateutility file that you put in the carpet) then you can close the install window. The last part is just to execute again the Qtek_S200_220736_2207116_024721_SPA.exe file and wait about 10 minutes
This worked for me, I just tried to translate the spanish link (I did my best with the english, sorry). Regards.
Panque said:
Yes, I was talking about a G4 too! I´ve got a spanish S200, originally from Vodafone, IPL 2.15.0001 and SPL 2.20.0001 First of all I unlocked it to use a Orange SIM and several days ago I upgraded the original Vodafone ROM to the Qtek´s ROM Qtek_S200_220736_2207116_024721_SPA thanks to the instructions of the link I told you. The clue was to use the file ROMUpdateUtility-NoVendorID.zip First of all you have to unzip this file in a new carpet you wish. Of course, synchronize PC and Qtek, etc., and then run the Qtek_S200_220736_2207116_024721_SPA.exe file and find in C:\Documents and Settings\your user\Configuración local\Temp SIX FILES. Look for them better for the date to know them (important: don´t close the install windows till you copy the six files in the carpet you made first time) When you copy the six files in the carpet (when the system ask you say that you don´t want to write on the original romupdateutility file that you put in the carpet) then you can close the install window. The last part is just to execute again the Qtek_S200_220736_2207116_024721_SPA.exe file and wait about 10 minutes
This worked for me, I just tried to translate the spanish link (I did my best with the english, sorry). Regards.
Click to expand...
Click to collapse
Dont work for me, ERROR (326) INVALID COMMAND
Related
Hi guys, I'm VERY new here
I have a UK Orange SPV M1000 with the following details:
Operator Version: 3.66.1.230
ROM Version: 1.66.00WWE
ROM date: 02/20/04
Radio Version: 1.10.00
Protocol Version: 1337.18
ExtROM version: 1.66.230
I want to upgrade to 2003SE because of what I've read about improved battery, improved BT and widescreen use (and cos I just do )
I've downloaded the ROM and ExtROM from the massive 26 page topic further down the page but ran the .exe and got ERROR 120: country ID error.
Hmmm....
I looked through the forum but to be honest a lot of the stuff went over my head and 30 pages of topic is a lot to read through...
Can someone PLEASE put down a step by step 'idiots' guide to upgrading my ROM with links to relevant things i would need to download/install/whatever
I know I'm asking a lot but it would really help me and I suspect many other people who might look at the forum and leave after a few minutes with spinning heads.
Also, I've not been able to find any posts in reference to the M1000, only O2 branded and original HTC devices. Does this mean I'll have problems connecting to Orange and will need to set up GPRS connections, etc myself?
One more thing.... I have an original Orange 1.66 ROM (downloaded from the Orange UK website). If I mess things up, don't like it, have to send it back to Orange, will i just be able to run that ROM update and everything will go back to how it was?
Phew, long 1st post!
Thanks for reading!!!
I upgraded mine yesterday with the help of a post on getting round the country id, however bluetooth and camera didnt work so had to go back to old rom, so yes you can go backwards.
Hi, I'll try to help you.
Now unrar the files you have. There you'll find "HimaGetDeviceData" file. Copy this one in your PPC.
> Then run it from there. HimaGetDeviceData won't do anything.
> then go to Windows directory and search for file called "Device Data". Copy it to your PC and open it.
there you will found data for your USB, Rom version, this meen 1.66.00wwe, PH10, and the last two are very importaint.
They can be ...
first one O2, Qtek, CDL, TMOBILE. Remember your. This is your Operator.
Second one can be ... WWE, ENG, GER. This is your Language.
After this, you need to download ER2003Edit. You can find it in the forom.
When you install this run the program and open ms_.nbf file first.
You will se the operator and Language. Change them if they are different from yours. ( this is the O2, QTEK, and WWE, ENG ).
Save the ROM file ( CTRL+S ).
Do this with the other two NK.nbf and Radio_.nbf files.
Then run " HimaUpgradeUt " and wait for " Congratulations " and you're ready.
Oh, when you get the Congr... Do hard reset.
(dont wory if you see on the screen of your PPC Radio stack or something like this isupgrading "Please wait" do your hard reset. )
Sorry for the bad English.
If have any questions ask
Hope this will help.
Ok, I have ER2003EDIT installed but when i tried to open ms_.nbf and it said i had the wrong password and asked me to enter one.
Any idea what it could be??
Thanks!
I think that you must not use the autodetect ROM, but the specific filetype: ms_.nbf. This worked for me...
Hello everybody from Russia (Moscow).
My phone model is O2 Xda Neo (Germany)
I have used this
278638-ruu_prophet_215746_2157138_023021_qtek_rus_ship
RUU_215737_2157135_023021_QTEK_s200_RUS
and return back to original O2 Germany without problem.
But I have installed next:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
Now I cannot install any other software. only this english version.
In install time (on 95%) I got next message
error 326: invalid command - the NBF file could not be used for your PDA phone - please check your NBF file
Boot screen has
IPL 2.15.0001
SPL 2.20.0001
The phone is ok. I can install this english version again, but I would like return to original German version or Russian.
I tried to use
pdamobiz.com_downgrade_and_unlockcid
and RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
but it does not help.
Can you help, please?
piece of cake:
what do you need is
reCOOK the ROM using molski.biz devpack...
just be sure to remove the ipl/spl nb file after you've extract the nb.nbf file
downgrade
Hi,
I have searching for a long time and used so much tools to downgrade my Qtek S200 Pocket PC to JAMin_WWE_1000925_10009114_11420_ship.exe (SPL 1.xxx, IPL 1.xxx)
When directly run "JAMin_WWE_1000925_10009114_11420_ship.exe" I get this error: the NBF file could not be used for your PDA phone - please check your NBF file
JAMin_WWE_213923_2139123_022021_shi.exe ROM is not my solution. I need to change my IMEI. iWizard and Lokiwiz03a don't help me to change IMEI.
Can anyone help me how to do Rom Cooking for SPL 1.xxx?
http://www.molski.biz/ here the rom cooking program and it is complicated a little bit.
I tried to search on Wiki and the forum. But negative hits.
Currently i have a english HTC tytn, and it has to change to a Dutch rom.
I searched for a simple language pack (like windows xp ). But i couldn't found 1.
So i searched on Wiki. I found some close hits but without the correct sollutions.
After searching for a while i found the WM 5 dutch Rom for a Hermes. ME_DT_NLD_1182542_104_10303_Ship.exe
I thought okey this must be easy. Just use unpack and run the Shipped Rom.
The Wrapper gave me the following error on installation. Error 260 device not found. Ok that isn't a problem i will use the Olipro wrappers from the bootload or sspl.
SSPL didin't work and the bootload trick worked. Actually after the 100% installation it gave the error, and the device was resetting. The device started windows. an it was actually a dutch version. Before i jumped up and down of excitment i wanted to be sure it installed the customize. When it started to install the customize it actually frozen at the today content. After waiting for an half our. I decided to give the device a hard reset. The screen after the hard reset turned white. So there was somethin wrong.
Next step was to take the .NBH file from the zipped package and unpack it in a folder to add the correct customization. It didn't help at all.
At this moment i am out of ideas. Because why wasn't the original rom installing as it suppose to be. Is this a common problem. or did i lost my mind and didn't follow the right steps.
Please let me know.
I actually used to reset the rom to its orriginal backup rom. but i get a vendor id error.!!!!
Fixed the problem;
I used Hard-spl-v7, after unpacking the shipped rom with NBH tool. Then removed the IPL / SPL folders from the new map and inserted the RUU-wrapper from the Hard-spl-v7 zip file.
Still have a wrecked rom on a other tytn. K.I.A. i quess. If its solved i let you know.
I did the HardSPL and then tried to upgrade to Crystal v5.1 but after going through the steps as I understand them to be, my 818pro just gets stuck at the Red-Green-Blue bars screen with the following 2 lines of text and it won't go anywhere else.
IPL 1.00
SPL 2.20
And then I read through and found someone posted a link to get IPL to 2.20 which I installed and now the Red-Green-Blue bars screen has the following 2 lines.
IPL 2.20
SPL 2.20
I don't know what I can do next. Does anyone have the utility to flash it back to Dopod 818pro original ROM so I may try to upgrade to Crystal v5.1 from scratch again? What solution is there there to get my phone functioning again.
Urgent. Please please help me. Thanks.
You didn't install HardSPL the right way, otherwise it should say:
SPL 2.G3.4PDA
So, just start all over again! BTW you have to run JumpSPL first before you can install HardSPL. To make things easier HMA4 created a .bat file that takes care of all the steps at once. You will find detailed instruction in the HardSPL thread and the New Upgrade Guide.
What I did was run hma4's .bat file. I don't know what went wrong but now I can't just run that .bat file to install again because I'm stuck at the RGB screen and the .bat execution just says
Code:
No device connected
Would you like to try copying again?
What can I do now? I cannot establish an Activesync connection which I think this JumpSPL thing needs...
Help...
you can download any "STEP1" connect your PDA with the bootloader screen and install it, it should be fine...if you still having issues, go ahead and download my ROM from the below link..its about 90 MB..you should have WinRar installed on your XP, download both files in one directory then right click one of them and select "Extract here" it is a shipped I mate Jamin G4 rom with Arabizer...it will replace the 3 splash screen, the Radio and reformate your PDA , BTW it does not check VID so no issue with any G4 (if you are using a G4 prophet this WILL SOLVE THE ISSUE ), when you are done...start from scratch with that BAT file.
* i assume you know how to flush roms
* This is only for G4
http://cid-61d70bae1a33dbb9.skydrive.live.com/browse.aspx/Share/PDA
havin almost d same prob too..
i think this is not d right room but if anyone can help me,
im lookin for original wm5 818pro rom but cant seem to find it.
the closest one is QTEK rom which can be found in XDA-wiki but the boot screen shows "QTEK" font in it,, but i want it to be "DOPOD"(somethin like the original boot screen)..anyone has link to this pls tell me..thanks
Thanks. I flashed it back to PDAVIET's step 1. Now re-trying HardSPL.
Get an error while trying to run the batch file. Same problem after manually copying files over to device manually and then running the following line copied from within the batch file.
Code:
D:\data\software\wm5\wm6\Update_Package\HardSPL\HardSPL G3>CeRun.exe -b CE:\JumpSPL.exe 0x10000000 \SPL.nb
cerun: failed to execute program (30123)
Help anyone?
Try this link
my solution :-
http://forum.xda-developers.com/showthread.php?t=353547
matthewchng said:
Thanks. I flashed it back to PDAVIET's step 1. Now re-trying HardSPL.
Get an error while trying to run the batch file. Same problem after manually copying files over to device manually and then running the following line copied from within the batch file.
Code:
D:\data\software \wm5\wm6\Update_Package \HardSPL\HardSPL G3>CeRun.exe -b CE:\JumpSPL.exe 0x10000000 \SPL.nb
cerun: failed to execute program (30123)
Help anyone?
Click to expand...
Click to collapse
Thank loads! That IS the solution.
Hi
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.
HERM200
IPL-SSPL by Des
SPL-1.09.ds
Expecting your kind advice
sati
cnsathya said:
Hi
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.
HERM200
IPL-SSPL by Des
SPL-1.09.ds
Expecting your kind advice
sati
Click to expand...
Click to collapse
Unfortunatly the Softbank hermes cannot be unlocked after a certain point:
pof said:
..It can be used in all HTC Hermes devices, no matter which bootloader version the device is running.
NOTE: For x01ht post April devices, see this thread....
Click to expand...
Click to collapse
pof said:
...This process is ONLY valid for new devices which have never turned on or let the SoftBank Extended ROM install.
If you have already let the ExtROM install you CAN'T sim-unlock it.
Click to expand...
Click to collapse
sounds like you have let the device install the ext_rom when you first turned it on, unfortunatly you cannot unlock it to use any sim card.
But you can do it with IMEI Check, you just cannot change radio version afterwards, but on newer version of X01HT it's 1.46 radio, so it's quite ok I think.
mrvanx said:
Unfortunatly the Softbank hermes cannot be unlocked after a certain point:
sounds like you have let the device install the ext_rom when you first turned it on, unfortunatly you cannot unlock it to use any sim card.
Click to expand...
Click to collapse
So if i upgrade to the latest radio rom,it still can't be solved??
how about if we change the EXtRom?
Success
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
hi... Learning.....
may i ask what ur x01ht was?
is it before april or post april?
I have this message coming up on a Japanese language version X01HT. I don't think it's been unlocked. Will these instructions work on my phone?
EDIT: I followed the instructions above on my phone, and they worked perfect!!! Thanks!
how can I tell if my phone is "post april"?
USIM Message GONE!!!!
Hello cnsathya,
Not sure if you still have the problem. I just got my x01ht Hermes yesterday and I worked on it today to unlock it. I used pof's (THANK YOU SOOOO MUCH) unlocker v3 but still USIM showed then later put my t-mobile sim and re-ran the unlock software but after 10 sec I still got the USIM message. I moved SB_USIM.cab to the phone and ran it before the USIM message came but nothing seemed to change. But I could then use my sim and receive calls so I flashed the PIMPING IS BACK v3 ROM by jasjammin and it now works perfectly and no more USIM. I had an old x01ht but cracked the screen so bought this one. Let me know if you need more information or have questions. Thank You,
Pr4tik
learnig said:
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
Click to expand...
Click to collapse
JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe <<< the page can not be found... does anyone help to upload please...
Is it ?
http://rapidshare.com/files/17336753/JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
It was listed here http://mobi.pdafans.com/viewthread.php?tid=275408&extra=page=3&filter=type&typeid=178
bayupraya said:
JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe <<< the page can not be found... does anyone help to upload please...
Click to expand...
Click to collapse
This is a very old thread and I beg your pardon for bumping it, but I am looking for a thread which can help me solve my problem for like 15 hours now and this is the closest answer I got. My issue is similar to this, only mine is X05ht or the Touch Pro device. Similar Softbank carrier and yes similar USIM message issue.
Anyone can help me point to the right direction of solving my issue like the threadmaker solved hers/his on this thread? Please?
HTC xo1ht
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.