Hi
Unlike my old MDA Pro (Universal), on a hard reset, the MDA vario installs cabs from two locations in 2 stages.
Stage One involves running \windows\preconfig.exe and doing the stuff listed in \windows\preconfig.txt
Stage Two installs the cabs from the extended rom as listed in config.txt
STAGE ONE
=========
LOCK:Enabled
SHOW:\Windows\TMO_WallPaper.bmp (Background image while install proceeds)
EXEC:\Windows\cusTSK.exe \Windows\T-Mobile.tsk (Sets T-Mobile Today Theme as active theme. .TSK file is present in ROM)
EXEC:\Windows\SetHSDPA.exe /Enable (Enables HSDPA)
CAB: \Windows\MMS_APCSP_20060425.CAB (MMS Related)
CAB: \Windows\MP_CVSDcpl_20060523-02.cab (Adds link for voice dialing to control panel?)
CAB: \Windows\MP_DRMfilesave_WWE_TMO_060505.CAB (DRM for WMP10?)
CAB: \Windows\MP_EmailWizDB_PPC_TMOUK_060216.CAB (Config stuff for the email wizard - dont think this is the wizzard itsself?)
CAB: \Windows\MP_MMS3.2_TMUK_Hermes_060609.CAB (MMS application?)
CAB: \Windows\PP_CommMgrCustomize.CAB (Customize CommsMgr dont know in what way!)
CAB: \Windows\PP_Fix_Customization_issue.CAB (Fix for the above?!)
CAB: \Windows\PP_Remove_UMTS_Only_(Network_Band).CAB (Prevent selection of UMTS only)
CAB: \Windows\P_TMO_WiFi_SSID_UNI.CAB (Add SSID's for WiFi Hotspots)
CAB: \Windows\Signed_DiscoButton8.sa.CAB (Add discconnect button for GPRS/3G)
All the XML files below do is make registry settings. Many of the settings made are exposed via the user interface anyway.
XML: \Windows\PP_BeepMode_Longtones.xml (Configure long DMTF Tones)
XML: \Windows\PP_Connection.xml (Add T-mobile GPRS/3G connection settings)
XML: \Windows\PP_EnableDTMFSupport-1.xml (Send DMTF Tones)
XML: \Windows\PP_GPRS_CSD_TYPE.xml (Set GPRS Type)
XML: \Windows\PP_ONS-SPN.xml (Set Operator Text)
XML: \Windows\PP_Other_Conn.xml (Various registry settings, view the xml file to see)
XML: \Windows\PP_Regional.xml (Regonal Settings time, currency etc)
XML: \Windows\PP_RingTone.xml (Configure Nasty T-Mobile Rings/Text Tones)
XML: \Windows\PP_ShowPIN2Page.xml (Shows the PIN2 Page On The Phone Settings - whats PIN2 for?)
XML: \Windows\PP_ClockAlwaysOnTop.xml (Puts Clock On Every App)
XML: \Windows\PP_WMODEM_Registry_key.xml (WModem Settings)
Hide:Enabled
EXEC:\Extended_ROM\autorun.exe (Do the customisation in the extended rom STAGE 2 - you get a chance at this point to soft reset and thus prevent installation)
LOCKisabled
RST: Reset
STAGE 2
=======
Most of the info below leeched from other posts!
LOCK:Enabled
SHOW:\Windows\TMO_WallPaper.bmp (Background image while install proceeds)
CAB: \Extended_ROM\MP-Hermes-Camera-patch-060613.CAB (Camera Patch)
CAB: \Extended_ROM\MT_Account-MMS.CAB (Adds MMS account to outlook, does not actually install MMS application)
CAB: \Extended_ROM\MT_PC_Hermes_TMO_REG_060612.CAB (T-mobile dialer skin and Video Call stuff)
CAB: \Extended_ROM\PP_HER_TMUK-UXC_12JUN06.CAB (Installs T-Mobile today screen item)
CAB: \Extended_ROM\PP_pIESetting_TMUK_050906.CAB (T-Mobile IE settings)
CAB: \Extended_ROM\ST_Her_BT_FIR_Param612.CAB (BT Settings?)
CAB: \Extended_ROM\P_rilgsm_patch.CAB (GSM Patch?)
CAB: \Extended_ROM\Patch_RTPlugInEx2.CAB (Ring tone plugin whatever that is)
LOCKisabled RST: Reset
Can anyone fill in the blanks?
Nigel
Related
I am now going to customize my ext. rom
I just not want to use the whole default-setting from my provider (today theme, default.htm, etc.) - but in this cab are also settings regarding wap, etc.
I´ve exported the needed registry-settings now, and want them to be added on installation via ext. rom.
my config.txt looks like this:
CAB: \Extended_ROM\TMD_AT.sa.CAB
CAB: \Extended_ROM\Broadcast_GER.sa.CAB
CAB: \Extended_ROM\TMCOMREG.sa.CAB
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\CameraRC131_GER_1.5.sa.CAB
CAB: \Extended_ROM\CallerIDRC11_GER_1.5.sa.CAB
CAB: \Extended_ROM\GPRSMonitor_GER.sa.CAB
CAB: \Extended_ROM\ClearVue_GER.sa.CAB
CAB: \Extended_ROM\TMD_AP_AT.sa.CAB
CAB: \Extended_ROM\OEM_AKU1_GER.sa.CAB
CAB: \Extended_ROM\OEM_GER_03120301.sa.CAB
CAB: \Extended_ROM\Version_AKU1.sa.CAB
CAB: \Extended_ROM\msvbppc.armv4.cab
CAB: \Extended_ROM\ExtendedROMSwitcher.arm.cab
CAB: \Extended_ROM\cecmd.arm.CAB
CAB: \Extended_ROM\deutsch.cab
CAB: \Extended_ROM\Mobipocket47de.CAB
CAB: \Extended_ROM\regedit.Mrln_ARM.CAB
CAB: \Extended_ROM\NewIpCalc2002.CAB
CAB: \Extended_ROM\Clearnotify.arm.cab
EXEC: \Extended_ROM\updatereg.reg
RST: Reset
so i thought, on calling the "updatereg.reg" wil force the device to add the registry-keys. - not working at all
Is there a way to add registry-keys via the automatic installation w.o. needing to edit/customize the cab´s?? (dont know, how to do)
thx as lot!
I've been having a look at the whole forum and i didn't find that neither! I'm also interested in being able to autoconfigure my registry and I dunno how.
Anyway, how do you change your wap, gprs... settings? could you upload your ext rom to the ftp?
Thks
For some days now I have this strange behaviour of Bluetooth GPS.
At first I had the 1.72 OS ROM together with T-Mobile 1.60.36 Ext ROM. After some fiddling around I got it all working.
Major setback: Not being able to use GPS via any com port
TomTom3 WAS able to connect via 'Bluetooth GPS'
To get by this last issue, I dropped most of the 1.60.36 Ext ROM. Basically I took the non-norwat-specific parts of the QTek 1.72 Ext. ROM and I added the T-Mobile customisations. I specifically did NOT use the "OEM_WWE_03120301.sa.CAB" from the old Ext ROM (as this changes the old T-Mobile 1.60 ROM to make it work a bit with bluetooth) but I used the "OEM_WWE_04051001.sa.CAB" instead.
The effect is that occasiuonally (differs from once per hour to once per 5 min) TomTom3 seems to freeze in Navigator mode. Apparently the GPS NMEA datafeed stops. Just exit and re-enter TomTom3 gets it working again.
I do not see any behaviour like this when I just keep a GPS Viewer running instead of TomTom3, which means there is nothing wrong with the GPS nor the Blkuetooth setting.
Switching to/from NMEA - SiRF doe snot make a difference.
I suspect the TomTom GPS to be the bastard here. . . .
Contents of my config.txt:
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\CameraRC132_WWE_1.5.sa.CAB
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\CallerIDB31_Hima2_WWE.CAB
CAB: \Extended_ROM\MMS1.6.0.14WWE.CAB
CAB: \Extended_ROM\GPRSMonitor_WWE.sa.CAB
CAB: \Extended_ROM\ClearVue_WWE.sa.CAB
CAB: \Extended_ROM\TMD_AP_NL.sa.CAB
CAB: \Extended_ROM\TMCOMREG.sa.CAB
CAB: \Extended_ROM\TMD_NL.sa.CAB
CAB: \Extended_ROM\OEM_AKU1_WWE_4AP.sa.CAB
CAB: \Extended_ROM\OEM_WWE_04051001.sa.CAB
CAB: \Extended_ROM\VideoMMS.sa.CAB
CAB: \Extended_ROM\Broadcast_WWE.sa.CAB
CAB: \Extended_ROM\3_networkname.CAB
CAB: \Extended_ROM\Version_172_900.CAB **
CAB: \Extended_ROM\itibm.ARM.CAB
CAB: \Extended_ROM\TMDNLCustomize.sa.CAB
CAB: \Extended_ROM\TM_phone_class10.CAB
CAB: \Extended_ROM\CheckNotifications.CAB **
CAB: \Extended_ROM\ExtendedROMUnlocker.CAB **
CAB: \Extended_ROM\RegEdit.CAB **
CAB: \Extended_ROM\WM2003 Dialer skin.cab **
CAB: \Extended_ROM\T-Mobile Registry additions.cab **
EXEC:\Extended_ROM\TPEnable.exe
RST: Reset
Lines marked ** contain self made/modified CAB's
CAN ANYONE give me a CLUE on what might be wrong here?
FOUND IT
Issue was with the SD card performance.
NOTHING wrong with Bluetooth, the DCONNEX BT GPS, 1.72 ROM, Extended Rom . . . .
See new thread:
http://forum.xda-developers.com/viewtopic.php?p=52965#52965
(I started a new one because the cause is not specific for TomTom)
Hi all,
[Amended] -
I will post all the links of WM2003SE usable software and related components here.
Please keep this as a one-stop shop to reference all the various postings.
If there are errors, please help me to point them out so I can amend them.
Thank you,
Henry
henrylim said:
It has been said in other forum that the ROM for 2.02 and 2.06 is basically the same. My concurrence is that there is some tweaking of the UI functions of the OS, and the core system modules should be still the same.
regards,
Henry
Click to expand...
Click to collapse
I believe the 2.02ti & 2.06 is not the same
If you check the different between both of them , you will find it is totally diffent in the code(look the same)
due to new version always release so that can cover up or patch up the problems in older version
Customised WM2003 SE Extended ROM - Asia Edition Version 2
ORIGINAL POSTING BY: ZeroXtreme
Edition: ROM 2.06 WWE
RADIO 1.18
Customised ExtROM for Asia 02 by ZeroXtreme
Language: English
Filesize: 11.51 MB
URL Link: http://forum.xda-developers.com/viewtopic.php?t=13795&highlight=wm2003se
Comments:
(a) ROM version is as per used by XDAIIs.
(b) XDAIIs specific files are removed from the installation.
(c) IntelliPad is included
(d) Socket SDIO Wi-fi driver is included
(e) MS ClearType Tuner is included.
(f) IntelliDialer and Intellipad custom skin included as additional zip files.
Genuine English WM2003 SE upgrade - by DCS
ORIGINAL POSTING BY: DCS
Edition: ROM 2.02.t1 WWE
RADIO 1.18
ExtROM 2.06.100a
Language: English
Filesize:
3 files
(a) OperatorUpdate.zip - DCS batch file to update operator ID in .nbf file - 528 bytes
(b) HIMA_WM_2K3_EXTROM.RAR - 2.88MB
(c) Himalaya_WM2003SE_Upgrade.zip - 17.52MB
URL Link: http://forum.xda-developers.com/viewtopic.php?t=13588&start=0
Comments:
(a) Known to have loud speaker bug
02 XDAIIs Asia ROM - with Extended Extended ROM - Dr.Stein
ORIGINAL POSTING BY: [Krueger]Dr.Stein
Edition: Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 14132) with
ROM - 2.06WWE
RADIO 1.18.00
ExtROM Original 02 XDAIIs Asian Extended ROM (2.06.100a)
Language: English
Filesize:
(a) WM2003SE XDA IIx.zip (ROM, Radio) - 17.43MB
(b) Xda IIx Extended Extended ROM.zip - 9.36MB
URL Link:
http://forum.xda-developers.com/viewtopic.php?t=13729&highlight=wm2003se
Comments:
(a) ROM is not original from XDAIIs, only the ExtROM is.
Chinese WM2003SE ROM - 2.20 - Mamaich Version
ORIGINAL POSTING BY: Mamaich
Edition: Chinese ROM 2.20.07CHS
Language: Chinese - half translated to English
Filesize: (18460034 bytes)
URL Link: http://mamaich.kasone.com/imate/chineese_se.rar
Comments:
(a) To install it - extract this archive, enter bootloader on your device and run HimaUpgradeUt
(b) Package does not contain Radio or ExtROM.
(c) Reputed to be most stable version. BT working, WMP 10 mobile inclusive!
Extended ROM Unlocker
ORIGINAL POSTING BY: Twinkle
Edition: Unknown - RAR compressed file
Language: English
Filesize: 15.71KB
URL Link:
http://forum.xda-developers.com/vie...s=0&postorder=asc&highlight=wm2003se&start=25
Comments:
(a) Unrar (using WinRAR in PC desktop) the file and you will see a CAB file.
(b) Copy/Move the Cab file to device folder (through ActiveSync/Explore function)
(c) Go to File Explorer, locate the Cab file and click on it to execute the installation.
(d) After installation, under Programs, you should see a Extrom Tools folder with 4 icons - hide, lock, unhide, unlock.
(e) Enuff said, use unhide, unlock options.
Procedures of Upgrade/Downgrade ROM - Prevent Country ID Err
Description:
DCS posting on how to upgrade/downgrade ROM and prevent Country ID errors.
URL Link: http://forum.xda-developers.com/viewtopic.php?t=12101&highlight=wm2003se
Applications in ExtROM that will kill 02 XDAII-WM2003SE ROM
ORIGINAL POSTING BY: Ken_xda
URL Link:
http://forum.xda-developers.com/viewtopic.php?t=14127&highlight=wm2003se
SG Ext ROM ROM Posting
Hi,
I have created a SG specific Ext ROM, thanks to the guidance from all the wonderful gurus here. To keep the file small, the Auto Config only has SINGTEL, STARHUB and M1 only.
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_O2Asia_0913.CAB
CAB: \Extended_ROM\ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB
CAB: \Extended_ROM\DialerSkin_Portrait_091104.sa.CAB
CAB: \Extended_ROM\DialerSkin_Landscap_091104.sa.CAB
CAB: \Extended_ROM\After_Sales_Service_091304.sa.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\default.sa.CAB
CAB: \Extended_ROM\CW-Album-Association.CAB
CAB: \Extended_ROM\O2Auto.sa.CAB
CAB: \Extended_ROM\Version_BA_112.sa.CAB
CAB: \Extended_ROM\OEM_BA_09240401.sa.CAB
EXEC:\Extended_ROM\SetButtonLock.exe
EXEC:\Extended_ROM\TPEnable.exe
CAB: \Extended_ROM\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\EmailWiz_v1.01.0003_NL_1027.CAB
CAB: \Extended_ROM\cttune.cpl.CAB
CAB: \Extended_ROM\CprogHook.WM2003_2577.CAB
CAB: \Extended_ROM\ExtendedROMUnlocker.CAB
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12.CAB
CAB: \Extended_ROM\SD_WPA.ARMV4.CAB
CAB: \Extended_ROM\XCPUScalar.arm.CAB
CPY1:\Extended_ROM\cabinstl.exe
CPY2:\Windows\cabinstl.exe
CPY1:\Extended_ROM\CABInstaller
CPY2:\Windows\CABInstaller
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
Download it here:
ftp://xda:[email protected]/Himalaya_SE/Himalaya_SE Extended ROM/2.06.100a SG ExtROM/
Starhub GPRS Configuration
Hi,
The manual configuration guide for Starhub users in Singapore.
RE
Hi henry!
Mine is for S'pore and Malaysia only. How about that?
CAB: \Storage\ExtendedROMUnlocker.arm.CAB
CAB: \Storage\Extended_ROM_viewer.CAB
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_O2Asia_0913.CAB
CAB: \Storage\IntelliPad_TMO_WWE_B12.CAB
CAB: \Storage\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\DialerSkin_Portrait_091104.sa.CAB
CAB: \Extended_ROM\DialerSkin_Landscap_091104.sa.CAB
CAB: \Extended_ROM\After_Sales_Service_091304.sa.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\default.sa.CAB
CAB: \Storage\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CW-Album-Association.CAB
CAB: \Extended_ROM\SD_WPA.ARMV4.CAB
CAB: \Extended_ROM\O2Auto.sa.CAB
CAB: \Extended_ROM\Version_BA_112.sa.CAB
CAB: \Extended_ROM\OEM_BA_09240401.sa.CAB
EXEC:\Extended_ROM\SetButtonLock.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
I find that the followings are not useful:-
TPDisable.exe - Not sure of its purpose. Doesn't affect performance if not present
TPEnable.exe - Not sure of its purpose. Doesn't affect performance if not present
ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB - I've the entire Suite so no point in installing just a few files
EmailWiz_v1.01.0003_NL_1027.CAB - Dont have this though
cttune.cpl.CAB -Already in my main ROM
XCPUScalar.arm.CAB - Conflicts with my backpack
cabinstl.exe - Not required
CABInstaller - Not required
Re: RE
FOSA said:
Hi henry!
Mine is for S'pore and Malaysia only. How about that?
CAB: \Storage\ExtendedROMUnlocker.arm.CAB
CAB: \Storage\Extended_ROM_viewer.CAB
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_O2Asia_0913.CAB
CAB: \Storage\IntelliPad_TMO_WWE_B12.CAB
CAB: \Storage\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\DialerSkin_Portrait_091104.sa.CAB
CAB: \Extended_ROM\DialerSkin_Landscap_091104.sa.CAB
CAB: \Extended_ROM\After_Sales_Service_091304.sa.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\default.sa.CAB
CAB: \Storage\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CW-Album-Association.CAB
CAB: \Extended_ROM\SD_WPA.ARMV4.CAB
CAB: \Extended_ROM\O2Auto.sa.CAB
CAB: \Extended_ROM\Version_BA_112.sa.CAB
CAB: \Extended_ROM\OEM_BA_09240401.sa.CAB
EXEC:\Extended_ROM\SetButtonLock.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
I find that the followings are not useful:-
TPDisable.exe - Not sure of its purpose. Doesn't affect performance if not present
TPEnable.exe - Not sure of its purpose. Doesn't affect performance if not present
ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB - I've the entire Suite so no point in installing just a few files
EmailWiz_v1.01.0003_NL_1027.CAB - Dont have this though
cttune.cpl.CAB -Already in my main ROM
XCPUScalar.arm.CAB - Conflicts with my backpack
cabinstl.exe - Not required
CABInstaller - Not required
Click to expand...
Click to collapse
Hi FOSA,
It's ok. I didn't include Malaysia as I am not sure if I can cover all the operators. You see, I don't know the rest very well to know if it's covers Malaysia or other countries.
I suppose that ExtendedROMUnlocker.arm.CAB is good enough? I thought it has all the functions to unhide and unlock the ExtROM folder?
Perhaps you are right that Cabinstaller is not really required. I included XCPUScalar 2.85 as someone reported that it speeds up the soft reset time.
I have other registered software which I did not post here. I am trying to import registry values automatically to tweak the performance of the ROM as well....any ideas?
RE
Hi henry!
S'pore telcos - SingTel, StarHub, M1
Malaysia telcos - Maxis, Celcom, Digi
The ExtendedROMUnlocker.arm.CAB is for unlock/lock only. I think you'll still require the Extended_ROM_viewer.CAB for hide/unhide :roll:
XCPUScalar 2.85 does speed up the performance as long as you don't have a backpack. NO speed up program works on the backpack. You can't even read the files on the backpack when you run the speed up program
Never try importing registry tweaks before so can't help you.
Re: RE
henrylim said:
FOSA said:
Hi henry!
I have other registered software which I did not post here. I am trying to import registry values automatically to tweak the performance of the ROM as well....any ideas?
Click to expand...
Click to collapse
Use a CAB editing software http://www.ocpsoftware.com/products.php?nm=cecabmgr and build your CAB that does the Reg tweaks. When u exec that CAB. All will be done.
Here's an example of mine done to the version.cab and what it does to the registry:
REGEDIT4
Set the Time Display to also display date on the menu bar
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"TBOpt"=dword:00000013
Disable the menu animation (Faster menu)
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu]
"AniType"=dword:0
Enable Low Battery Notification customization through the Sounds & Notification setup
[HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D663-239C-47a7-9304-0D347F580408}]
"Default"="Low battery warning"
Click to expand...
Click to collapse
Here is the example what my version.cab do:
ok so I have tried many kitchens some half way work and others just fail me..
I I was just wondering i know how to unpack the cab files and repack them when i use a kitchen and when i select it in the kitchen and install the rom some of the programs work and otheres dont. i would kinda like to have everything install at once is there away to do it because i normally have about 16programs i use all the time that takes about 30min to an hour to install one by one
can some1 help me if tried PPCGEEKS kitchen maker and DCDs and a few others... normally only 2or 3 programs work correctly.
READ
http://forum.xda-developers.com/showthread.php?t=366337
gc14 said:
READ
http://forum.xda-developers.com/showthread.php?t=366337
Click to expand...
Click to collapse
im going to make sure i get this right.. all i do is add a txt file with that name on my sd card and
LOCK:Enabled
all the programs
LOCKisabled
RST: Reset
and then reflash my phone????
Correct
That is how I do it. It saves a bunch of time.
I have it even setup my Owner Info, e-mail accounts, and such.
Makes flashing a breeze.
sweet thanks every1 sooo much guess im going to be re flashing again and then watching in amazment
Be careful to read the part where they discuss CABs that make you interact during the install. They can't be lumped together with everything else. I have programs such as GPS Today inside of there, because you have to push an OK button to start the install process.
sweet thanks every1 sooo much guess im going to be re flashing again and then watching in amazment
Click to expand...
Click to collapse
You need to make sure you select UC Autorun in the kitchen.
You also need to make sure your cabs are in the right directory on your sd card. For instance:
CAB: \Storage Card\Cabs\random.cab
random.cab has to be in a folder on your storage card called Cabs.
gc14 said:
You need to make sure you select UC Autorun in the kitchen.
You also need to make sure your cabs are in the right directory on your sd card. For instance:
CAB: \Storage Card\Cabs\random.cab
random.cab has to be in a folder on your storage card called Cabs.
Click to expand...
Click to collapse
ok well soo far things are looking good i just did a test with the programs and things worked out so far i think
LOCK:Enabled
CAB: \Storage Card\SDCONFIG\All Mobile Mines.CAB
CAB: \Storage Card\SDCONFIG\ATT_MobiTV___XMRadio_MusicID_Unlimited.cab
CAB: \Storage Card\SDCONFIG\CorePlayer_PocketPC_lxp.cab
CAB: \Storage Card\SDCONFIG\dcd Titan Carrier - Sprint.cab
CAB: \Storage Card\SDCONFIG\duckhunt101.cab
CAB: \Storage Card\SDCONFIG\flashlite2_1_winmobile5_ppc.CAB
CAB: \Storage Card\SDCONFIG\FlashVideoBundle.CAB
CAB: \Storage Card\SDCONFIG\freecell-1.1.ARM.CAB
CAB: \Storage Card\SDCONFIG\GoogleMapsNEW.CAB
CAB: \Storage Card\SDCONFIG\HappyTappingKeyboard.arm.CAB
CAB: \Storage Card\SDCONFIG\HTCHomePlugin.cab
CAB: \Storage Card\SDCONFIG\HHCv10b6.CAB
CAB: \Storage Card\SDCONFIG\IOTA.CAB
CAB: \Storage Card\SDCONFIG\Kevtris.CAB
CAB: \Storage Card\SDCONFIG\nueLED_1.5.cab
CAB: \Storage Card\SDCONFIG\nuemms.cab
CAB: \Storage Card\SDCONFIG\opera9.cab
CAB: \Storage Card\SDCONFIG\OxiosMemory.CAB
CAB: \Storage Card\SDCONFIG\sdkcerts.cab
CAB: \Storage Card\SDCONFIG\PK NewWarningColorBatteryClean3G.cab
CAB: \Storage Card\SDCONFIG\PocketCM-0.21.cab
CAB: \Storage Card\SDCONFIG\PocketPictureSIInstall22.CAB
CAB: \Storage Card\SDCONFIG\rar.ppc_arm.cab
CAB: \Storage Card\SDCONFIG\regedit.Mrln_ARM.CAB
CAB: \Storage Card\SDCONFIG\Skyfire_4503_PPC50.CAB
CAB: \Storage Card\SDCONFIG\slick_ppc_0_42.cab
CAB: \Storage Card\SDCONFIG\Sprint PictureMail Site Hack.cab
CAB: \Storage Card\SDCONFIG\spybotsdce.ppc.arm.cab
CAB: \Storage Card\SDCONFIG\Task_Manager_2_0_30487_2.CAB
CAB: \Storage Card\SDCONFIG\WWM108.CAB
CAB: \Storage Card\SDCONFIG\xnpocket_xscale.cab
CAB: \Storage Card\SDCONFIG\zsIRC_2008_02_28.cab
LOCKisabled
RST: Reset
so far thats what it looks like now im going to have is copy things over at the start
so far thats what it looks like now im going to have is copy things over at the start
Click to expand...
Click to collapse
Copy what over?
gc14 said:
Copy what over?
Click to expand...
Click to collapse
themes to the phone and then set up my e-mail
how do i set up my e-mail i use pop3 and the only thing i can find is for gmail and i dont use that...
i use
Cableone
POP3 for outgoing and incoming
mail.cableone.net for incoming
authmail.cableone.net for outgoing
you can copy themes and ringtones etc, by using cpy1 and cpy2 commands...
i copy all my ringtones from a ringtones folder on my card to the rings directory in windows. i still have to set them on my own, but thats my next project.
I am having trouble making an oem file from this cab file. When using Package Creator, I get an error that says that there is no setup xml. I am fairly new at making oems, but I have had no problems with my other cab files. would someone please make an oem file for me? The program is Pocket Bible 2 I think, or it might be 1. I upgraded to 3 and 4, which I made the oems without any problems, but I don't like them, I like the older versions like the one in this cab file.
TIA, for anyone's help!
Here and here.
I re-created the CAB to insert a setup file. I then created an OEM file out of it. Try them and tell me how they work.
scrosler, can you explane how to create OEM from cab step by step, or may be some wiki link?
I tried to use packages creator 5.1b1, but i get some errors. May be it because i use Vista.
Scrosler
Thanks!!! I am about to Cook and Flash now. I have a TriYzee OEM, Works Great. But if I use UCC, When it runs the TriPYzee Cab File, There is a promt that says this file was created with.... and you have to click ok. But if using UCC I can't click ok. Can that be taken out of the cab file easily enough? So much to learn, but it is fun when it all works!
No Luck With PB2 OEM
Scrosler when I flashed with the oem, It showed up as a ie link in the programs file. It didn't go anywhere.
sricke said:
Thanks!!! I am about to Cook and Flash now. I have a TriYzee OEM, Works Great. But if I use UCC, When it runs the TriPYzee Cab File, There is a promt that says this file was created with.... and you have to click ok. But if using UCC I can't click ok. Can that be taken out of the cab file easily enough? So much to learn, but it is fun when it all works!
Click to expand...
Click to collapse
im guessing UCC is really UC (user customization)? when you use UC and have cabs that require user input. such as clicking OK or selecting yes/no for soft reset, you need to set up your UC to unlock your screen. this will install your user input required cabs in the background so you can input when needed. you shouldnt try doing other things when UC is running. after your input required cabs install, the rest will isntall with the screen locked. ii'll show you mine as an example. everything inside the LOCK: Disabled to LOCK: Enabled will install in the background with the Today screen displayed. you wont see any progress but the files are installing, and when the input is required it will show up on the screen. after the last cab installs (mobileaim.cab in this case), the regular UC screen will appear and show the progress for the rest of your files. you may have to test your cabs to determine which ones require your input.
if you don't have cabs for some of your programs, try Universal Extractor (you will need beta 1.6 if you are using Vista). this program is awesome and it will extract the cab (and all the other files) from an .exe or any other archive.
Code:
LOCK:Enabled
LOCK:Disabled
HIDE:Enabled
CAB: \Storage Card\Cabs\1-Calc_Lite.cab
CAB: \Storage Card\Cabs\GPSToday0981.cab
CAB: \Storage Card\Cabs\SpbPhoneSuite.cab
CAB: \Storage Card\Cabs\MemMaid.cab
CAB: \Storage Card\Cabs\Pdanet.cab
CAB: \Storage Card\Cabs\SpbMobileShell2.cab
CAB: \Storage Card\Cabs\SpbPocketPlus.cab
CAB: \Storage Card\Cabs\SpbTime2.cab
CAB: \Storage Card\Cabs\SpbWeather.cab
CAB: \Storage Card\Cabs\mobileaim.cab
HIDE:Disabled
LOCK:Enabled
CAB: \Storage Card\Cabs\Audiopara.cab
CAB: \Storage Card\Cabs\Dialskin.cab
CAB: \Storage Card\Cabs\GC 4 Columns.cab
CAB: \Storage Card\Cabs\Googlemaps.cab
CAB: \Storage Card\Cabs\LivesearchWM6.cab
CAB: \Storage Card\Cabs\ICSinstall.cab
CAB: \Storage Card\Cabs\MMS.cab
CAB: \Storage Card\Cabs\Opera Mobile 9.5.cab
CAB: \Storage Card\Cabs\PocketMechanic.cab
CAB: \Storage Card\Cabs\RescoExplorer2008.cab
CAB: \Storage Card\Cabs\RescoKeyboard.cab
CAB: \Storage Card\Cabs\RescoRegistry.cab
CAB: \Storage Card\Cabs\SKTools.cab
CAB: \Storage Card\Cabs\Verizon.cab
CAB: \Storage Card\Cabs\WMWifiRouter.cab
CAB: \Storage Card\Cabs\RescoRegistry.cab
CAB: \Storage Card\Cabs\TT7.cab
LOCK:Disabled
RST: Reset