i dont know if this is the right section for this question so MODS/ADMIN/GODS move to the right place here is my question first of all I've unlocked flashed/reflashed my cingular with pof's software so thanks to that, but I want to know how to set-up my Cingular 8525 on TMOBILE to send MMS what are the correct settings?any guide?I tried the MDA setting but cant get it to work...so I really need help...Thanks...
25 views 0 replies I'll be patient and wait...
iseedeadpeople said:
25 views 0 replies I'll be patient and wait...
Click to expand...
Click to collapse
Maybe since this forum is for upgrading. I also noticed your post at HOFO. Have you called TMO and asked? I took a quick look at TMO site and it wasnt much help. The "settings" servers/ports from the MDA will work, what is the specific issue. Is there no place to enter the servers or does it look correct and it just doesn't send or receive?
well all the fields to key-in is in there only problem is it has 2 options when im asked MyISP or My Network, dont know where to add modem there and also on the MMS setting there is a The WAP and Secure WAP?so which is which?anybody here using t-mobile MMS with cingular 8525
If your in the uk, you can sign onto my tmobile and they will send the settings to your phone.
To add a new modem you have to go to start>settings>connections> Add a new modem connection
You should specify in the mms settings to use the TMO connection
Here are the steps and settings:
Step 1. Setup GPRS connection for T-Mobile network:
Start > Settings > Connections (tab) > Connections > Advanced (tab) > Select Networks > New...
Enter the name for the profile (e.g. T-Mobile), then go to "Modem" tab and click "New...", enter name for the connection (e.g. T-Mobile Data), choose "Cellular line (GPRS, 3G)" in the drop-down menu, click "Next", the access point should be "wap.voicestream.com", click "Next", leave all fields blank on this page, click "Finish". Now go to "Proxy Settings" tab and select "This network connects to the Internet".
**Mod edit**
I removed your section on how to possibly get free internet from your provider. This board is not for the discussion warez, or anything closely related. If you want to share that type of info do it in private
Click "Ok" all the way out.
Step 2. Setup MMS:
Start > Programs > Messaging > Menu > Tools > Options... > MMS > Servers (tab) > New
Server name: (you name it)
Gateway: 216.155.165.50
Port Number: 9210
Server address: http://216.155.174.84/servlets/mms
Connect via: (the connection you created in step 1)
Sending size limitation: 300K
WAP Version: WAP 1.2
Click "Ok", set this new entry as default (with a red arrow on the icon).
You are all set.
p.s. I can get free internet on my account but not my friends', don't know why, need to have T-MobileWeb service ($5.99) to make it work on their account, eventhough still cheaper than Total Internet service ($29.99)
I never try WAP 2.0 on MMS settings, 1.2 works, so... (port 9210 is default for WAP 1.2, when choosing WAP 2.0 it will change to 8799)
hope this helps
iseedeadpeople said:
only problem is it has 2 options when im asked MyISP or My Network
Click to expand...
Click to collapse
<<<<<<<<on this part which one should i choose? MyISP or My Network when adding the modem..Thanks..
iseedeadpeople said:
<<<<<<<<on this part which one should i choose? MyISP or My Network when adding the modem..Thanks..
Click to expand...
Click to collapse
Either MyISP or My Network are the name of the profiles.
Anyway, I'll suggest leave "MyISP" alone and create a new profile insted of modify it. (probably modify it works too) It seems like some features are not open to that one.
Afterwards, when selecting network, the new profile go to the upper slot. and the lower slot probably be "My Work Network".
Related
HI there
i have an problem with my GPRS on XDA 2,
the problem is i can't access internet on my XDA2. i have the following setting
APN: payandgo.o2.co.uk
username: payandgo
password: password
wap field setting in proxy server 193.113.200.195 @ 9201 port
if i open pda.o2.co.uk wesite in IE, it dispaly every thing very fast aprox @ 45KB/Sec
but if i try to open any other site like yahoo, hotmail, google the speed for GPRS drop to 1KB/Sec. and page can't be dispaled message comes up.
I have PAYG O2 SIM card.
i spoke to o2 Customer services to enable my "Enable Web" services but they told me that they can't do it because i am using PAYG .
IS there any other way to get around this problem i mean without going on contarct with O2. and using the same PAYG sim.
Kind Regards
Gugi
Sorry mate there's nothing that can be done as the Mobile Web APN isn't available for PaynGo
bydandie said:
Sorry mate there's nothing that can be done as the Mobile Web APN isn't available for PaynGo
Click to expand...
Click to collapse
hi all ppl
i found this in this forum
OK, full instructions:
* I recommend deleting any existing GPRS settings you have under the work connection settings before entering these to avoid confusion *
1. Go to Start -> Settings -> Connections Tab -> Connections.
2. You'll see 2 sets of option links. 'My ISP' and 'Work'. Under the work links, choose 'Add a new modem connection'.
3. Name for connection: o2 gprs. Modem: Cellular Line (GPRS). Tap Next.
4. Access Point Name: payandgo.o2.co.uk
5. Username: payandgo
6. Password: password
7. Tap Finish.
8. Back in the connections settings screen, tap 'Edit My Proxy Server'.
9. Tick 'This network connects to the Internet' and 'This network uses a proxy server to connect to the Internet'.
10. In the proxy server box enter: 193.113.200.195
11. Tap OK.
12. Back in the connections settings screen, tap the Advanced tab.
13. Tap 'Select Networks'
14. In both drop down boxes choose 'Work' as the connection. Tap OK.
15. Tap OK again.
16. You are now ready to surf o2 pay as you go gprs full internet.
Sorry to be the bearer of bad news; these instructions were great a few weeks ago, but O2, for reasons best known to themselves, have clocked PAYG access to GPRS
hi there
these settings still works for me
i use in my proxy server setting port 8080 instead of 80
regards
Gugi
I've managed to get WAP over GPRS working now - these intructions from O2 are what I followed - except that I first deleted teh existing connection (Right-tap on it and select delete):
Xda II GPRS WAP manual settings Pre-pay
It is not possible to select the 'Prepaid' option within 'My Xda' Connections in the O2 Active UI on the XdaII - 'Postpaid' is selected as default and cannot be changed.
To use the XdaII with an O2 Prepay SIM then the WAP settings will need to be changed manually - note that it will not be necessary to carry out a hard (full) reset in order to complete this.
IMPORTANT - once the WAP settings have been changed, if a hard reset is carried out at some future point, then the settings will automatically be re-configured back to Postpaid and they will need to be manually changed again..
XdaII Manual Setup - GPRS WAP (Prepay)
Tap Start > Settings
Tap 'Connections' tab
Tap 'Connections' icon
Under 'My Work Network' tap 'Manage existing connections'
Tap 'Edit'
The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
Tap 'Next'
Access Point Name: payandgo.o2.co.uk
Tap 'Next'
Usernameayandgo
Password: password
Domain: leave blank
Tap 'Advanced'
On the 'TCP/IP' tab, only 'Use server-assigned IP address' should be selected
Tap the 'Servers' tab
Only 'Use server-assigned addresses' should be selected
Tap 'OK'
Tap 'Finish'
Tap 'Proxy Settings' tab (*Note, the soft keyboard may be hiding this tab - tap the keyboard icon at bottom right to clear this away)
Ensure that 'This network connects to the Internet' box is ticked
Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
Tap 'Advanced'
In the 'WAP' field (Server) enter: 193.113.200.195
In the field to the right of this (Port) enter: 9201
Tap 'OK' and exit
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
you can still have full internet on o2 p&g, mines working fine
so you can actually use Interent Explorer to reach html pages?
Can you check out your settings and see how they differ from what's in my last post? Then I'll see if I can get this working too...
Just a quick not here. Try changing the http port to 8080 instead of the default 80 (thanks to gugi_sat). All works perfectly for me now Just need MMS now.
Thanks for the help guys
Hi MamaKin
here are the MMS setting for O2 UK PAYG
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempes before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit
gugi_sat said:
hi there
these settings still works for me
i use in my proxy server setting port 8080 instead of 80
regards
Gugi
Click to expand...
Click to collapse
8080 in the WAP port?
or HTTP?
in http
regards
GUGI
does 193.113.200.195 go in HTTP as well as WAP? because my box is empty.
sorry i was in hurry before
ok yeah as in my setting
HTTP: 193.113.200.195 PORT : 8080
WAP: 193.113.200.195 PORT: 9201
SecureWAP : EMPTY
Socks: 193.113.200.195 PORT: 1080
Type : Socks 4 setected
and the rest is same as explained before
hope this will help
Regards
Gugi
It's working now... Thanks.
One other thing (that isn't shown above)
Start > Settings > Connections Tab
Connections icon > Advanced Tab
Select Networks...
In Network Management,
I had to change both boxes to 'My Work Network'
Mine was set to My ISP and didn't work.
Thanks again for your help.
* I recommend deleting any existing GPRS settings you have under the work connection settings before entering these to avoid confusion *
as written above in my post
any way thats good that yr machine works
Regards
Gugi
o2 UK PAYG gprs settings for XDA IIi
Hi all,
I am just wondering if the gprs settings for XDA II works for XDA IIi. I tried it, it's not working for me...Gugi_sat, I need your intelligent brain now plzzzzzz :idea:
Cephas007
There is a God watching over us!!!
hi Cephas
i have only xda2 so i can't help you o this sorry about that, but u can try making a new connection deleting the previous ones (#BUT MAKE SURE YOU TAKE ALL THE BACKUP OR WRITE DOWN ALL THE SETTING BEFORE YOU DO DELETE ANY SETTING)
new connection shold be "work connection".
and follow the instructios explained above.
all the best and very soory thats all i can say ....
Regards
Gugi
Im still a little lost.
My Internet Explorer only works on Work settings, but
My email only works on My ISP settings
Thats it
i am not able to access my email and msn with this connection but i can accessing internet only . I think i mentioned that earlier here or some where in this forum any way good luck with this sort of free connection because i have no credit on my phone and i am using this for month i mean it looks free to me rest i dono.
regards
Gugi
Can any one help me do settings for My Siemens SX-56 Settings for Ufone or Telenor (PAKISTAN) Settings. I have tried to do the settings by accessing the web pages of the said companies but its General Settings and i seem to get lost with the complicated way the settings provided by Ufone.
I also need to know how to send mms which i could not figure out at all.
thx
aamer sheikh
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
For GPRS do the following: (I'm assuming your device has WM2003SE)
- Start > Settings
- Select the Connections tab and click on the Connections Icon
- Click on the Advanced Tab
- Click on the Select Networks button
- On the Network Management screen, under the first dropdown list (for
"programs that automatically connect to the internet should connect using",
click the New button.
- On the next screen, enter an ISP name, e.g. UfoneGRPS
- No other settings needed, save these settings and clic on the Tasks Tab
- Now here you will see your UfoneGPRS connection listed with a bunch of
options
- Click on the Add a new modem connection option under UfoneGPRS
- Enter a name for your connection e.g. UfoneInternet
- Select CellularLine)GPRS) in the Select a modem setting, click next
- Enter ufone.plinternet in the Access Point Name box
- Click Next. No further entries needed, click Finish and save settings.
Your connection is now set. Click ok to get all the way back, on the today screen click on the signal strength icon to display the connection bubble. It should display your newly made connection name with a "connect GPRS" lick. Click on it and you should be connected to the Ufone GPRS network in a few seconds.
Good luck. Lemme know how it goes.
p.s. before you can use GPRS and MMS you have to call the customer services at Ufone and ask them to activate both of these services for you. It takes some time for this to happen e.g. you call them today and it will start working perhaps the next day.
For MMS do the following:
Again like the above you have to create a new connection by first creating a connection name and then a new modem connection for it. Lets say you called the connection "UfoneMMS"
These are the settings for that modem connection for UfoneMMS
- Connection Name: Ufone.mms
- AccessPoint: ufone.plmms
- Everything else: default
After this, go to pocket outlook, in the settings, do the following:
Create a Message Server as folows:
Server:
Name: UfoneMsgServer
Gateway: 172.16.13.27
Port: 9201
Address: http://www.ufonemms.com:80/
xxxxxxxx=9999999
(the xxxxxxxx and 99999999 are your MMS account username and mailbox ID that Ufone creates for you and you have to obtain it form their customer services peeps).
Then in the main settings, set the following parameters:
- Connect via: Here you select your connection name e.g. Ufone.mms
- Connect to Server: UfoneMsgServer (the server you just defined)
One last thing, I dont know how important this is but they always say to do it..
In the Slect Networks screen (where you first defined your connection), click on the Dialing Rules buttons and click "use dialing rules". Then setup new Dialing rules for say, Mobile as follows:
Dialing rules: Dialing patterns
Local: G
L.D. : G
Intl.: G
You should be all set up.
I have heard that recenty they changed some MMS related configuration so you might wanna chekc up with them to see if all the above parameters for MMS are still valid. I had them all setup and working perfectly for a while... but I havent used MMS in a long time so I dont know whats been happening recently.
If you have any trouble, lemme know. Everything should work, its working on my machine.
Access point is ufone.plinternet for lahore connections and
ufone.piinternet for islamabad connections and I think it differs from city to city be sure to check with ufone
APN
What is the Access Point Name for Multan?
please help me.
humayunl said:
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
Snip, snip.....
If you have any trouble, lemme know. Everything should work, its working on my machine.
Click to expand...
Click to collapse
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
shanalikhan said:
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
Click to expand...
Click to collapse
you should only install this application, you do not have to bother setting up GPRS manually....
humayunl said:
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
For GPRS do the following: (I'm assuming your device has WM2003SE)
- Start > Settings
- Select the Connections tab and click on the Connections Icon
- Click on the Advanced Tab
- Click on the Select Networks button
- On the Network Management screen, under the first dropdown list (for
"programs that automatically connect to the internet should connect using",
click the New button.
- On the next screen, enter an ISP name, e.g. UfoneGRPS
- No other settings needed, save these settings and clic on the Tasks Tab
- Now here you will see your UfoneGPRS connection listed with a bunch of
options
- Click on the Add a new modem connection option under UfoneGPRS
- Enter a name for your connection e.g. UfoneInternet
- Select CellularLine)GPRS) in the Select a modem setting, click next
- Enter ufone.plinternet in the Access Point Name box
- Click Next. No further entries needed, click Finish and save settings.
Your connection is now set. Click ok to get all the way back, on the today screen click on the signal strength icon to display the connection bubble. It should display your newly made connection name with a "connect GPRS" lick. Click on it and you should be connected to the Ufone GPRS network in a few seconds.
Good luck. Lemme know how it goes.
p.s. before you can use GPRS and MMS you have to call the customer services at Ufone and ask them to activate both of these services for you. It takes some time for this to happen e.g. you call them today and it will start working perhaps the next day.
For MMS do the following:
Again like the above you have to create a new connection by first creating a connection name and then a new modem connection for it. Lets say you called the connection "UfoneMMS"
These are the settings for that modem connection for UfoneMMS
- Connection Name: Ufone.mms
- AccessPoint: ufone.plmms
- Everything else: default
After this, go to pocket outlook, in the settings, do the following:
Create a Message Server as folows:
Server:
Name: UfoneMsgServer
Gateway: 172.16.13.27
Port: 9201
Address: http://www.ufonemms.com:80/
xxxxxxxx=9999999
(the xxxxxxxx and 99999999 are your MMS account username and mailbox ID that Ufone creates for you and you have to obtain it form their customer services peeps).
Then in the main settings, set the following parameters:
- Connect via: Here you select your connection name e.g. Ufone.mms
- Connect to Server: UfoneMsgServer (the server you just defined)
One last thing, I dont know how important this is but they always say to do it..
In the Slect Networks screen (where you first defined your connection), click on the Dialing Rules buttons and click "use dialing rules". Then setup new Dialing rules for say, Mobile as follows:
Dialing rules: Dialing patterns
Local: G
L.D. : G
Intl.: G
You should be all set up.
I have heard that recenty they changed some MMS related configuration so you might wanna chekc up with them to see if all the above parameters for MMS are still valid. I had them all setup and working perfectly for a while... but I havent used MMS in a long time so I dont know whats been happening recently.
If you have any trouble, lemme know. Everything should work, its working on my machine.
Click to expand...
Click to collapse
AWSUMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
Keep Going with your Advises
its so simple and it works
shanalikhan said:
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
Click to expand...
Click to collapse
Try to Hook with Windows Mobile 6.5 standard or professional
then its simple to proceed
and if no, make a hard reset with your phone to re gain the factory settings and then try
BDW, Which Phone you have...?
If you have struggled to enable MMS on you XDA I then read further...
My XDA
OS: PPC2002
ROM: 3.20.06 ENG
ROM DATE: 07/30/03
RADIO: 4.21.00
Service Provider: OPTUS (Australia)
Software you need: EZWAP ver:2.5 (search google for a download)
Other things before starting: I am under the impression that you need to ask your service provider to enable mms on yor account before it will work? I got my sim-card in Feb 2004, and never asked optus to enable mms on my device (i only asked them for their server settings - which they couldnt give me cuz they suck) Mine works, so i'm assuming its enabled by default. Just ask them anyways.
And finally before we start: This xda is not (to my knowledge) cooked in any way. It is just as i got it.
I've tested this 3 times now, and it worked perfectly every time. Since i'm using optus (prepaid) and i couldnt find ANY details anywhere on the net for optus network MMS settings, i'm posting it here for all who are just as fed up with the lame-ass customer service as i am.
(This is quite a long post, but im taking it hell into detail here. Another thing.. its written in dumbass language so if i say something like "click OK (top right of screen)" then just think of all the newbies )
Network Settings for GPRS
TODAY SCREEN
start > settings > 'connections' tab > "Connections"
(i'm assuming you did an auto-config when you first started the unit)
Click MODIFY
Click Optus GPRS...
You should have the following details:
name: Optus GPRS Internet
modem: Cellular Line (GPRS)
baud rate: 19200
click ADVANCED
no checkboxes should be selected, and 'use server-assigned IP address' should be selected.
click NAME SERVERS
select 'use server-assigned addresses'
click OK (top right)
click NEXT
access point name: mms (if i remember correctly this used to be set to 'internet'
click FINISH
click PROXY SETTINGS
only select checkbox 'This network connects to the Internet'
click OK (top right)
(you are taken back to CONNECTIONS main screen)
click OK again
close the window and go back to today screen
------------------------
EZWAP Setup
start > programs > "EzWAP v2"
click TOOLS
select OPTIONS
GENERAL tab (tabs at bottom of screen)
Connection should be: "Optus GPRS Internet"
"Connect Automatically" checkbox should be selected.
Home Page: file://windows/ezos2.wmlc
"break line after images.." checkbox should be selected.
CONNECTION tab
select the GATEWAY radio button
Address: 61.88.190.10 Port: 9201
NO CHECKBOXES SHOULD BE SELECTED HERE - this was a big problem earlier on
Connection Timeout: 50
Retries: 5 x timeout: 100
PUSH tab
"Enable Push" should be selected.
Address is left blank.
Port: 2948
"Connectionless Push Gateway" should be selected.
"WTLS secured connection" should NOT be selected.
HISTORY/CACHE tab
No changes.
IDENTIFICATION tab
"allow client identifier to be sent through headers" should be selected.
nothing in textbox
"allow geographical location..." should be selected.
MMS tab
Message Server: http://mmsc.optus.com.au:8002
sender address type: "Phone Number"
Sender Address: {your phone number in normal form... e.g. 0431405405 NOT +61431405405}
MMS OPTIONS tab
Message Expiry: Max
"Delivery report" should be selected.
"Read report" and "hide sender" should NOT be selected.
-------------------------------
This should work now when you send or receive MMS messages!!! yayy!
Here are a few problems i've picked up; they might happen to you and then again might not... if anyone has a solution for them please let me know
1) When you get a mms message, it will display a notification on your screen. When i choose to 'get now' it just does nothing. I have to go to my inbox and the message is there, then select to download. Not a big problem, but kinda irritating? I think someone else in these forums had the same problem.
2) Whenever i used my phone on my XDA it doesnt allow me to 'close' the phone-application. thus its always running in the background then. It's like i'm just swapping between the today screen and phone. ANyways, the problem is this:
the MMS works as long as i havent used the phone. It seems that the phone application (or connection or whatever) is conflicting with the EzWAP software, or the GPRS connection or something. The only way i can get MMS to work after using the phone is by doing soft-reset. Then everything works fine. I'm guessing that if your phone is closing properly then you wouldnt have this problem at all.
If this has happened to anyone (the phone not closing) and you have fixed it please let us know!
3) This is unrelated to MMS.
I cant do a soft-reset when my SD card (1GB Ridata 66X) is inside the unit. When i do this, i just get a blank white screen. When i take the card out and soft-reset then it works fine. Any ideas?
Thats it, happy MMS'ing!!!
The cost (for anyone interested) of sending a mms message to myself and receiving it was AU$0.60 in total. This is on the OPTUS network, using prepaid.
ok, if this even helped ONE person then i'm happy
His Lordship JayDA I
yep one it is me
well thanks for your so precise explanation
cos of it i manage to config my access to vodafone.pt and send a mms
so THANKs thank you thanks
some problems still but.....time is on my side lol
thanks aggain
need EZWap 2.5
Hi, can anyone please send me the complete send the link of ezwap 2.5, i dont seem to find any evaluation version of it.
I am in a desperate need of MMS on my Qtek 1010.
Please help me
Thanking you in advance
i'm looking for a bit of registry help with my Cingular 3100.
i'm using Rogers in Canada, and i got the MMS/Internet settings for rogers from one of the other forums...
my problem is that i can't set it up so that i can use both... i can set it so one works, or the other, but not both... having to change when switching from being MMS capable, to browsing the internet, will be a pain that i don't think i'll be able to remember all the time, so i'd rather be able to set it, and forget it.
the plan is to use my "Rogers GPRS" (GPRS Settings), for Internet... and "Rogers MMS" (also a set of GPRS Settings), for "Work" and assign MMS to function over connection "Work"...
problem: i can't set "Work" to "Rogers MMS"...
any thoughts?
for others that might be struggling with this, my solution was to use something other than the "work" connection... which is primairly used for VPN connections... the original author of a tool to make this work setup a dummy, or null VPN and linked the "work" connection pointer through that to the MMS settings... instead, i used a different pointer. namely the "WAP Network" pointer.
for other service providers review here and get your network service providers GPRS/MMS settings and substitute accordingly.
otherwise...
the following is all the information needed to connect a Windows Mobile Smartphone to Rogers with MMS services:
first is to create a new connection: (Start > Settings > Connections > GPRS)
Name the connection appropriately, in this example, i will be using "Rogers MMS"
tell the device this connection connects to "WAP Network" (this is a pointer)
Connection Settings:
Access Point:
"media.com"
User name:
"wapuser1"
Password:
"wap"
leave primary/secondary DNS and IP Address blank, and okay the connection.
before leaving the connection menu (not GPRS), select menu (right softkey) > Advanced, and make sure "WAP Connection" is set to Rogers MMS (or equivilant).
next, go into your text messages, and Select "Options" from the menu; select account options > MMS. next, select "MMSC Settings" from the menu (right softkey). Create a (or modify an existing) Profile for Rogers, with the following information:
MMSC URL:
"http://mms.gprs.rogers.com"
WAP Gateway:
"172.25.0.107"
Port:
"8080"
Connect Via:
"WAP Network"
the name and max sending size can be, more or less, anything. be aware that not all files will be sent due to file size; the standard limit is 300kb.
select done, and head back to your inbox. select "switch Accounts" from the menu, and select MMS; attempt a trial message to yourself. this will confirm both the ability to send and recieve MMS messages on the rogers network.
------ end MMS Tutorial ---------
the following, is the accompanying configuration for internet access on Windows Mobile 5 enabled smartphones:
Create a new GPRS Connection (Start > Settings > Connections > GPRS), for this example, we will call the new connection "Rogers GPRS".
this connection:
Connects to:
"The Internet"
Access Point:
"internet.com"
User Name:
"wapuser1"
Password:
"wap"
Primary/Secondary DNS and IP Address: all blank.
finally check the advanced settings in the connection menu (right softkey in connections menu), and ensure "Rogers GPRS" is used for "The Internet".
attempt to access a page using Pocket IE, the device should automatically establish the GPRS/EDGE connection.
------- End Wireless Internet Tutorial -----
Hi
I am in China but I AM NOT chinese. I have been looking for the way to set GPRS and MMS for This phone forever and couldn't find. I notice we have a chinese friend in this forum. anyone could help me?
There indeed is a small app designed especially for this purpose.
Just unpack the files into any folder on your device. Click on DataConnection.exe to open the app, select "remove all" to delete all existing connection configurations, then choose the second item named as "中国移动WAP包月". after all is done, click on cancel to quit. Now ur device is capable of surfing the net and sending/receiving MMS.
Also be sure you have a data connection package, by default the data connection for web browsering via China Mobile is charged at RMB ￥0.03/kb.
settings for China Mobile gprs
Hi,
Also living in China, not Chinese. All you have to do for the China mobile GPRS is change the setting to the following and it works just fine:
1. Go to start>settings>connections>add new connection
2. Call it cmwap, set it as a gprs connection, tap next
3. access point name is CMNET
4. username and password are BOTH "CMNET" all caps
5. leave domain blank
6. tap finish
enjoy
As posted above, do make sure you get a dataplan. They have one for 25RMb a month that includes 200MB of GPRS and 300 text messages.
Thanks you very much both of you very appreciated
China Mobile MMS & GPRS setting for HTC Tytn II
could anybody tell me the China Mobile MMS & GPRS setting for HTC Tytn II. Many thanks.
seems obvious...
af888 said:
could anybody tell me the China Mobile MMS & GPRS setting for HTC Tytn II. Many thanks.
Click to expand...
Click to collapse
I've been using a Cingular 8125 with WM5 in Ningbo then Shanghai for the past 8 months. The wireless internet has never worked perfectly since I moved to Shanghai, but when I returned last week with my TyTN 2 (Tilt) it never works. I used the same standard setup CMNET, not username or password etc. No error messages, just it never connects. Maybe the TyTN2 actually does have specific settings.
首先我们进入数据连接菜单里：开始—设置—数据连接原来装有前他的连接都删掉还有拨号连接和VPN连接里都是空的有的话也统统删掉跟着按：GPRS连接 进入再按菜单—添加
描叙：移动梦网GPRS
名称：移动梦网GPRS
连接到：WAP网络
访问点：CMWAP
用户名：留空不用填
密码：留空不用填
主DNS：留空不用填
辅助DNS：留空不用填
IP地址：留空不用填
填写完后按完成.代理服务器—菜单—添加
之后就可以设置代理服务器连接了
描叙：移动梦网GPRS(名称可以随意)
连接方：WAP网络
连接到：Internet
代理服务器：10.0.0.172:80
类型：HTTP
用户名：留空不用填
密码：留空不用填
填写完后按 完成—[另注:这个是用来上WWW的代理]再添加:描述:wap连接方:WAP网络连接到:安全WAP网络代理服务器:10.0.0.172:9201类型:WAP完成.再按完成.[另注:这个是用来直接上WAP的,直接上WAP是在包月里的,不要再代理]完成退出到连接菜单在数据连接菜单中按：菜单—完成选项在我的桌面连接到：选internet网络—完成Internet连接：移动梦网GPRS
工作连接：自动
WAP连接：移动梦网RS
安全WAP连接：wap连接 最后就是按完成退出--接下来最后一步就是打开Ie按菜单—选项—连接选择自动监测设置处不要打勾....选择网络：Internet或者wap安全网络..现在就能够实现通过cmwap接入上wap网站和www网站了
that`s all
China mbile GPRS MMS Setting.
Deall All,
I am Using i-mtate JasJam, WM6.1
I used GPRS.Zip then choose the second item named as "中国移动WAP包月". , now I can brows internet, but ca not send and recieve MMS.
CHINA Mobile.
Best Regards.
mlalahoi said:
Hi,
Also living in China, not Chinese. All you have to do for the China mobile GPRS is change the setting to the following and it works just fine:
1. Go to start>settings>connections>add new connection
2. Call it cmwap, set it as a gprs connection, tap next
3. access point name is CMNET
4. username and password are BOTH "CMNET" all caps
5. leave domain blank
6. tap finish
enjoy
As posted above, do make sure you get a dataplan. They have one for 25RMb a month that includes 200MB of GPRS and 300 text messages.
Click to expand...
Click to collapse
mlalahoi,
Thanks for the information!
I'm on CM with the 神州行service.
I applied for the RMB20 package & suddenly, my GPRS settings refused to allow me to connect to the internet.
I made changes to the settings & now I'm good to go.
For the record, these are my settings:
Connects to: Internet
AP: CMNET
Username: CMNET
Password: CMNET
IP Address: 10.0.0.172:9201
I need to input the IP address or else I can't find the website I'm browsing to.
Under Connections | Menu | Advanced | Menu | Options, I configured My Desktop connects to: The Internet.
In Connections | Menu | Advanced, I set my Internet Connection to the entry I created for the GPRS connection above & set the others (Work, WAP & Secure WAP) to Automatic.
Finally, in PIE, I set my connections to Internet & uncheck the Automatically detect settings checkbox.
I'm good to go now.
BTW, what type of service are you on? My RMB20 package comes with only 50Mb of data?!
TIA!
Konker
HTC Startrek w/WM6.1 Standard by Erofich
gprs.zip on samsung omnia i900
charlieluo said:
There indeed is a small app designed especially for this purpose.
Just unpack the files into any folder on your device. Click on DataConnection.exe to open the app, select "remove all" to delete all existing connection configurations, then choose the second item named as "中国移动WAP包月". after all is done, click on cancel to quit. Now ur device is capable of surfing the net and sending/receiving MMS.
Also be sure you have a data connection package, by default the data connection for web browsering via China Mobile is charged at RMB ￥0.03/kb.
Click to expand...
Click to collapse
Hi, I got the zipped files onto my Samsung i900 but when i click on "Remove All" it says it did it but I still have modem connections in "Connections". Then, when i select on the WAP option between chinese characters it says "Fail to XML load file." any suggestions?
Thanks!
How to setting wap/gprs and acces internet
Hi I'm,
I'm buy bellwave N81i but couldn't set-up wap/gprs and accessing internet. Anybody can help me? I'm live in Indonesia
thanks
MMS and GPRS setting for the Samsung i900
Hello every one does any one know how to apply the setting for gprs and mms for the i900 samsung
I finally resolved this after a long time. First you have to set up the connection to go to "cmwap", not "cmnet" and configure the proxy settings using one of the methods above. Then you need to configure the MMS mailbox. Open Messaging and choose Tools->Options from the menu. On the list of mailboxes, click on MMS. This opens the configuration. Click the Servers tab and then the New button. Server name is whatever you want, Gateway is 10.0.0.172 (same as proxy), port is 9201 (WAP), Server Address is http://mmmc.monternet.com. The "Connect via" should be the one you already created, then change the WAP version to 1.2. Save this and then on the next screen click on the new name and click on the "Set as Default" button.
Things should now work fine.
Hi i'm expatriate in china and i have a spv c600 from orange, can i use this cellphone for GPRS and MMS if yes how can i setup it ?
Thanks in advance for your help
hey there,your info was very helpfull...i was wondering if you could help with some other issues..i got an htc diamond a month ago and i love it.. but thing is i live in china and i cant find the right pinyin input for my phone...monster chinese and cect are no help.. please assist
another problem is that i have downloaded many games on the phone but most of them wont play..the loading screen comes on and then the screen just goes back to the games folder..please assist..
need help to set GPRS(China Mobile) on P1i
hello guyz , anyone knows to set GPRS on P1i ??
how to make a new internet account for China Mobile ^^
my service is 5 yuan / month ^^
thank you for your answer ^^
Help me plzz
hey friends,
im from pakistan but using china handset, any body can tell me how i set my mms setting in my handset ? waitting for ur reply thanks
oaktree6 said:
Hi, I got the zipped files onto my Samsung i900 but when i click on "Remove All" it says it did it but I still have modem connections in "Connections". Then, when i select on the WAP option between chinese characters it says "Fail to XML load file." any suggestions?
Thanks!
Click to expand...
Click to collapse
Hey Friends,
im from pakistan but im using china handset mobile (sigmatel T99i)... anybody know how i set mms setting in my mobile ? plz tell me im waitting ur reply thanks
Hey guys,
I have an i-Star i-8016b but I cannot find any settings or extra languages for it!
Please Help!!
SOS for blackberry storm
hello guyz I'm in China and i'm using a BB Storm, does anyone know how to set GPRS on blackberry storm?? I'm using China Mobile ^^
my service is 50 yuan / month ^^
thank you for your answer