Is there any way to remove the sppl and Super cid from the phone using mtty or any other means? almost like formatting it.. I am trying to flash original shipped roms but for some reason, the radio rom does not change and thinking its the sppl loaded. I have tried the wiki erase procedure http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems.
any help would be great....
Mal
what rom did you upgrade your device to??
at present there is no way to revert your device back from SuperCID to DOPOD001, but we can flash you back to the original Dopod ROM...
SSPL is an application that just sits in the memory device when you want to upgrade/downgrade a ROM so when you reset the device after upgrading/downgrading its gone...
i flashed it with HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship
but my radio is still 1.35.00.11.
The update came up with no errors. For some reason the radio stack didnt change..
Thats why Im thinking if there are any entry addresses in mtty I can delete..
the super cid setting and sppl.. and any other hacks...
Mal...
can you goto your c: and post on this thread your ruu.log file please...
walshieau said:
can you goto your c: and post on this thread your ruu.log file please...
Click to expand...
Click to collapse
Walshieau,
Im unable to locate log.ruu. Neither on my desktop conputer or the pda..
Should this file have been created when updating?
Mal..
malrose said:
Walshieau,
Im unable to locate log.ruu. Neither on my desktop conputer or the pda..
Should this file have been created when updating?
Mal..
Click to expand...
Click to collapse
mal open windows explorer and goto your c:, in the root (c:\) there will be an ruu.log file...
I found it, hope you can make some sense of it b\c I got no f idea!!
14:52:53:110 [msg] : Version : [5.10 - 20060412].
14:52:55:013 [msg] : Current in CE Mode.
14:52:59:259 [msg] : Device ID is Special .
14:52:59:259 [msg] : Device BL VER : [] [].
14:52:59:259 [msg] : =============================================
14:52:59:259 [msg] : START GetNBHInfo !
14:52:59:279 [msg] : END GetNBHInfo !
14:53:09:814 [msg] : Ac Info : [1] [50] [100].
14:53:09:824 [msg] : Check Ac in CE mode. AC : [1]
14:53:09:824 [msg] : IsBL. BL : [0]
14:53:14:230 [msg] : Enter BL OK.
14:53:29:613 [msg] : Disconnect ActiveSync .... [2]
14:53:29:613 [msg] : Start Get Connect Port.
14:53:29:693 [msg] : Cann't Find Any USB Port.
14:53:29:693 [msg] : Open USB and COM Port Error. [2]
14:53:43:753 [msg] : Disconnect ActiveSync .... [0]
14:53:43:753 [msg] : Start Get Connect Port.
14:53:43:753 [msg] : Cann't Find Any USB Port.
14:53:43:753 [msg] : Open USB and COM Port Error. [2]
14:54:02:440 [msg] : Disconnect ActiveSync .... [0]
14:54:02:460 [msg] : Start Get Connect Port.
14:54:02:460 [msg] : Cann't Find Any USB Port.
14:54:02:460 [msg] : Open USB and COM Port Error. [2]
14:54:18:563 [msg] : Disconnect ActiveSync .... [0]
14:54:18:613 [msg] : Start Get Connect Port.
14:54:18:823 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
14:54:28:798 [msg] : Device ID is Special .
14:54:28:798 [msg] : Device BL VER : [1.04] [].
14:54:31:201 [msg] : =============================================
14:54:31:201 [msg] : START UpdateNBH !
14:54:32:523 [msg] : Upgrade 1 : 0 Start.
14:54:33:665 [msg] : Upgrade 1 : 0 End.
14:54:33:775 [msg] : Upgrade 1 : 1 Start.
14:55:16:997 [msg] : Upgrade 1 : 1 End.
<this space is althe same. start end>
15:19:03:218 [msg] : Upgrade 2 : 167 Start.
15:19:06:032 [msg] : Upgrade 2 : 167 End.
15:19:06:032 [msg] : END UpdateNBH !
15:19:08:235 [msg] : START BackCEMode !
15:19:08:395 [msg] : END BackCEMode !
15:19:08:395 [msg] : START Reboot !
15:19:08:425 [msg] : END Reboot !
15:19:08:425 [msg] : START UnInitialization !
15:19:08:465 [msg] : END UnInitialization !
Sorry to cut and paste but it wont let me attach..
Mal...
email me the file to the email address on my user details....
here it is..
malrose said:
here it is..
Click to expand...
Click to collapse
interesting... where did you download the ROM update from??
i suggest downloading the update from the dopodasia website, copying SSPL onto your device, and re-run the update...
walshieau said:
interesting... where did you download the ROM update from??
i suggest downloading the update from the dopodasia website, copying SSPL onto your device, and re-run the update...
Click to expand...
Click to collapse
Im pretty sure it is from the dopod asia website.
I will download again then reflash...
fingers crossed...
make sure you use the SSPL before you run the update...
Now im in the shi!..
Its been bricked (again) with no gsm.
And its got bootloader 1.06 and no kitl..
Mal..
how do you keep bricking it?? open mtty and type 'info 2' and tell me what it says...
USB>
USB>info 2
CID: Wait interpreter timeout
No cid..
But I cant even load a rom with kitl and revive it with win ce 5.0.
malrose said:
USB>
USB>info 2
CID: Wait interpreter timeout
No cid..
But I cant even load a rom with kitl and revive it with win ce 5.0.
Click to expand...
Click to collapse
can you post your ruu.log file again so i can figure out where it crashed..
I think its been overwritten b\c ive been trying to flash other roms..
This is whats there..
malrose said:
I think its been overwritten b\c ive been trying to flash other roms..
This is whats there..
Click to expand...
Click to collapse
yeah from the log file its not getting the CID from the bootloader... check your pm
Related
hello ,
I am facing a problem when i try the ShowPIN.exe file for Xda-Developers ..
when i run the program it give me a massege " Unknown PIN (Error 2) "
my Pin Code is for 4 digets !!
how i can fix it i need it really gayz !!
Code:
My Rom IS : 3.17.03 ENG (SER 1.2 )
Radio : 3.25.00
Protocol version : 32S54
Hi everybody
Im new here and have no experience with my new TYTN.
So i tried upgrade on 838PRO HK_ENG_WM6- first i unlock cid & sim THEN SEE IPL 1.04 AND SPL 2.30 OLIPRO and after start flash with dopod rom.
After 15 percent tytn stopped and lost connect with sync centre - my PC running under WIN XP - so now is device totally dead and boot no go trough win mobile logo screen JAST GREEN LED DIOD -
it looks like LOSE super CID and my boootloader change and now ipl 1.04 and spl 2.03 NOW WHEN GO IN BOOTLOADER AND MTTY command:
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
Cmd>info 2
HTCSF kEØ(HTCE
Cmd>
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
----------------------------my bootloader is changed...HELP PLEASE i try all metod more then 20rom flash ..sd card....how to fix this.
other flash by ruu is not possible by error msg - invalid vendor id and stack in 1% and sd card not work just always see not allow!!! .
if anybody got idea to fix it - please send me a post. Very thanxful.
Hi Experts
My Phone is Advantage X7500 .I Tried to change (upgrade) my rom version (AP 4.0 Platinum) cause it's speed is very Low.
In Bootloader is see this Information :
Athe400
IPL : v2.02
SPL : V3.65 Olinex
And This is The Device Information :
ROM Version : AP 4.0 Platinum
ROM Date : 11/09/07
Radio Version : 1.58.00.00
Protocol Version : 32.91.7020.20H
And The Identity Tab In Device Information :
Model No : ATHE100
Why In The Bootloader wrote ATHE400 And In Device Information ATHE100?
Now I Downloaded Michy 6.0 ROM (windows Mobile 6.1) with SPL 3.5 and Tryed to Install But After 1% The Error [244] : INVALID MODEL ID Shown What do I do ?
Please Help Me
These are The Pictures Of My Phone Details
Please Help
i have same problem
hi i have same problem . my x75oo is dead i try lot of rom it didnt work same bady help us
mansoor2fx said:
Hi Experts
My Phone is Advantage X7500 .I Tried to change (upgrade) my rom version (AP 4.0 Platinum) cause it's speed is very Low.
In Bootloader is see this Information :
Athe400
IPL : v2.02
SPL : V3.65 Olinex
And This is The Device Information :
ROM Version : AP 4.0 Platinum
ROM Date : 11/09/07
Radio Version : 1.58.00.00
Protocol Version : 32.91.7020.20H
And The Identity Tab In Device Information :
Model No : ATHE100
Why In The Bootloader wrote ATHE400 And In Device Information ATHE100?
Now I Downloaded Michy 6.0 ROM (windows Mobile 6.1) with SPL 3.5 and Tryed to Install But After 1% The Error [244] : INVALID MODEL ID Shown What do I do ?
Please Help Me
Click to expand...
Click to collapse
Athe400 is the id for the athena x7510 which is a different hardware
You could try cmonexs solution to access the phone via mtty to change it back to the correct ID.
I am assuming you were totally correct in saying you have an athena x7500 with the microdrive.Check against the photo in the wiki.
Just picked up an optimus V off of ebay with a clean ESN and now all I am getting is an LG boot loop. Tried a bunch of combinations
Home, vol down, power
return, vol down, power while plugging in
menu and power
None worked. Not sure where to go from here. Never had the issue with my captivate. If it is bricked, which solution should I go about unbricking it?
Try home volume up
Sent from my LG-P500 using XDA
Nope, it does it's loop but then a blank screen blinks and it goes off. Left it plugged in for 2 hours and it just kept repeating the cycle, no battery charging, nothing.
Alright, i've been screwing with it for a few hours now. Got into e-mode and tried flashing the optimus S (sprint) to try and unbrick it with this method
http://androidforums.com/optimus-v-...-how-fix-bricked-lg-optimus-v-s-firmware.html
But at step 9, it doesn't detect it while it's in e-mode, and when I put it in normal mode, it updates, gets to 94% and reboots, after which it sits in its LG splash loop. Unable to do anything besides boot it back into e-mode.
Veight said:
Alright, i've been screwing with it for a few hours now. Got into e-mode and tried flashing the optimus S (sprint) to try and unbrick it with this method
http://androidforums.com/optimus-v-...-how-fix-bricked-lg-optimus-v-s-firmware.html
But at step 9, it doesn't detect it while it's in e-mode, and when I put it in normal mode, it updates, gets to 94% and reboots, after which it sits in its LG splash loop. Unable to do anything besides boot it back into e-mode.
Click to expand...
Click to collapse
Why would u want to flash a optimus S firmware on optimus V?
allenwalker1998 said:
Why would u want to flash a optimus S firmware on optimus V?
Click to expand...
Click to collapse
Because that seems to be the only way to unbrick it.. Can't get into recovery and stuck in an LG splash loop.
Veight said:
Because that seems to be the only way to unbrick it.. Can't get into recovery and stuck in an LG splash loop.
Click to expand...
Click to collapse
U should flash optimus v firmware on optimus v then only it will unbrick.
allenwalker1998 said:
U should flash optimus v firmware on optimus v then only it will unbrick.
Click to expand...
Click to collapse
Mind directing me to a working way to unbrick using optimus v firmware?
Veight said:
Mind directing me to a working way to unbrick using optimus v firmware?
Click to expand...
Click to collapse
U either use kdz or LGDMP to flash the firmware
allenwalker1998 said:
U either use kdz or LGDMP to flash the firmware
Click to expand...
Click to collapse
From what I have read there isn't any working optimus v firmware out. The original that was leaked over a year ago was missing a dll and it hasn't worked since.
For kdz:
Pre steps) turn off lg USB modem
1) turn the phone into e.mode and plug in.
2)start up kdz and select 3gqct
3) flash firmware and wait. (Mine took 1 hour)
4) if successful, ur phone should be unbricked. If unsuccessful, change the mode in kdz but not the 3gqct
Veight said:
From what I have read there isn't any working optimus v firmware out. The original that was leaked over a year ago was missing a dll and it hasn't worked since.
Click to expand...
Click to collapse
Use O1's firmware then should be able to work.
allenwalker1998 said:
Use O1's firmware then should be able to work.
Click to expand...
Click to collapse
O1's firmware?
Veight said:
O1's firmware?
Click to expand...
Click to collapse
Optimus one firmware
allenwalker1998 said:
Optimus one firmware
Click to expand...
Click to collapse
Alright. Attempting it with V20G_00.kdz and keep getting "Upgrade Error WParam: 100 LParam: 502" No matter which type I attempt.
Veight said:
Alright. Attempting it with V20G_00.kdz and keep getting "Upgrade Error WParam: 100 LParam: 502" No matter which type I attempt.
Click to expand...
Click to collapse
Can u take a screen shot?
Here's a log and SS of the error/attempt
Code:
[08:20:21:506] : =============================================
[08:20:21:506] : Log is started on 21.06.2012, at 08:20:21:506,
executable: C:\Users\Veight\Downloads\kdz_fw_upd_en\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x00002164),
compile time : Dec 8 2010 09:19:37
[08:20:21:506] : Version :
[08:20:21:507] : Get Usb Port
[08:20:21:508] : rsi.strFriendlyName=Communications Port (COM1)
[08:20:21:508] : Remove Communications Port (COM1)
[08:20:21:508] : rsi.strFriendlyName=LGE Mobile USB Serial Port (COM4)
[08:20:21:508] : FriendlyNameList[iii].szFriendlyName=LGE Mobile USB Serial Port
[08:20:21:508] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM4
[08:20:21:508] : Port = COM4
[08:20:26:511] : RX Timeout : 5.0 seconds
[08:20:26:511] : RX TIMEOUT
[08:20:26:512] : UNKNOWN : Req(12) -> Rsp(13)
[08:20:31:523] : RX Timeout : 5.0 seconds
[08:20:31:523] : RX TIMEOUT
[08:20:31:523] : >> DIAG_STATUS_F FAILED
[08:20:31:528] : >>Get Model Name [DIAG_VERNO_F]
[08:20:31:529] : BAD CONN MODE : Req(0) -> Rsp(3)
[08:20:34:540] : RX Timeout : 3.0 seconds
[08:20:34:540] : RX TIMEOUT
[08:20:34:541] : BAD CONN MODE : Req(0) -> Rsp(3)
[08:20:37:552] : RX Timeout : 3.0 seconds
[08:20:37:552] : RX TIMEOUT
[08:20:37:553] : BAD CONN MODE : Req(0) -> Rsp(3)
[08:20:40:565] : RX Timeout : 3.0 seconds
[08:20:40:565] : RX TIMEOUT
[08:20:40:565] : FAIL (No Phone)
[08:20:40:565] : GetModelName() Operation Failed Check Diag CMD
[08:20:40:565] : EMERGENCY Booting Mode
[08:20:40:565] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[08:20:40:566] : LS670ZVD
[08:20:40:566] : First two character of model name is not BS
[08:20:40:566] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - No Phone
[08:20:40:566] : GetEmergencyModelName in Emergency Mode - FAILed (No Phone)
[08:20:40:566] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[08:20:40:566] : Close Port<<
[08:20:40:566] : TYPE_WPARAM_UPGRADE_ERROR
[08:20:40:566] : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 502
[08:20:40:594] : Log finished
Switch type to 3gqct
Switch phonemode to emergency
and check that LG USB modem is turned off
Sent from my LG-P500 using xda premium
allenwalker1998 said:
Switch type to 3gqct
Switch phonemode to emergency
and check that LG USB modem is turned off
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Modem is disabled in device manager.
Heres the full log file after I hit okay to the error message.
Code:
[R&D Test Tools Log File]
09:00:24 : Launching SW update
09:00:24 : Unpacking KDZ
09:00:25 : KDZ file extraced
09:00:25 : Files were extracted.
09:00:25 : LGMobileDL Load.
09:00:25 : Port = -1
09:00:25 : Connecting to phone
09:00:36 : Check Phone mode = 2
09:00:43 : Phone type check.......
09:00:44 : LGMobileDL.DLL Loading....
09:00:45 : _SetAuthMark Fail
09:00:45 : _SetAuthMark Ok : wAuthMark(23043)
09:00:45 : _DetachDLL Call
09:00:45 : _DetachDLL Call End
09:00:45 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V20g-ESA-XX-SEP-21-2011+0-DZ.dz
09:00:45 : Param : moduleDir =
09:00:45 : Param : waitTime = 1
09:00:45 : Param : UsbHighSpeed = 1
09:00:45 : Param : PhoneMode = 2
09:00:45 : Param : BinVersion = V20G_00
09:00:45 : Param : AuthMark = 23043
09:00:45 : Call fn_StartUpgrade
09:01:06 : CDMA: wParam = 100, lParam = 502
09:01:06 : Step : Upgrade Error2 - Error Code : 502
09:01:06 : ResetStartInfo() Call
09:01:06 : _DetachDLL Call
09:01:06 : _DetachDLL Call End
09:01:06 : FreeLibrary Call
09:01:06 : FreeLibrary Call End
09:01:06 : ResetStartInfo() Call End
09:01:07 : ===FINISHED===
09:02:05 : OnModelDllMsg(OnMsgFromModelDll-CDMA) delete m_pLGCyonUpdate
Just an update. Installed windows xp into a VM and tried it since i saw some people were having issues with Windows 7 X64 and no go. Same error. :\
please help.
im a new user of p768
i want to unlock bootloader
ive used this thread http://forum.xda-developers.com/showthread.php?t=2085344
but when i tried offline flashing im stuck at 15% and it says phone is not connected but drivers are installed correctly
please help me.
here is the log:
07:47:09 : [C:\LGMobileUpgrade] Try to delete folder
07:47:09 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
07:47:09 : Start Date : 2013-12-07 07:47:09
07:47:09 : ---------- QM Testmode ---------
07:47:09 : ***** Check Tool Version *****
07:47:09 : Tool version : 1.5.4.8
07:47:09 : UpgradeDLL version : 1.2.6.7
07:47:09 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
07:47:09 : LGE USB Driver Version :
07:47:09 : Android PDLV Version :
07:47:09 : Android NDLV Version :
07:47:09 : ******************************************
07:47:09 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
07:47:09 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
07:47:09 : SetEmerModeAT()
07:47:09 : _IsConnectedPhone Call
07:47:18 : _IsConnectedPhone(0)
07:47:18 : 0 - NotConnected.
07:47:18 : 1 - Normal connect success
07:47:18 : 2 - Emergency connect success
07:47:18 : *****CheckOS Start********
07:47:18 : Microsoft_Windows_XP_Home Edition_Service Pack 3
07:47:18 : *****CheckPCSyncPrograms Start*****
07:47:19 : PCSyncPrograms Not Found - OK and ready to upgrade
07:47:19 : Checking the connection with the cell phone...
07:47:19 : dwWaitResetTime(40000 ms)
07:47:20 : _IsConnectedPhone Call
07:47:27 : _IsConnectedPhone(0)
07:47:27 : 0 - NotConnected.
07:47:27 : 1 - Normal connect success
07:47:27 : 2 - Emergency connect success
07:47:28 : _IsConnectedPhone Call
07:47:35 : _IsConnectedPhone(0)
07:47:35 : 0 - NotConnected.
07:47:35 : 1 - Normal connect success
07:47:35 : 2 - Emergency connect success
07:47:36 : _IsConnectedPhone Call
07:47:44 : _IsConnectedPhone(0)
07:47:44 : 0 - NotConnected.
07:47:44 : 1 - Normal connect success
07:47:44 : 2 - Emergency connect success
07:47:44 : [009,400,102,102,102]The USB cable and your cellphone are not connected.\nPlease connect your phone and wait for connecting \nthe USB port for a while and press the [009,700,147,062,092]'Restart'[009,400,102,102,102] button.
07:47:49 : Check Cancel button active..
07:47:49 : Check Cancel button active..
07:47:49 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
07:47:49 : Page_Error 睡碟殮棲棻
07:47:49 : [011,700,147,062,092]LG Mobile Phone Software Update was canceled\n\n[009,400,102,102,102]To quit LG Mobile Phone Software Update, please press the [009,700,147,062,092]Exit[009,400,102,102,102] button below.
07:47:49 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Connect you phone in LG software mode and run the flasing again.
Sent from my LG-P765 using XDA Premium 4 mobile app
If your on jb or everything else is just not working you'll have to use the online method which only takes longer
Looks like a drivers problem to me. Are you on Windows 8/8.1 by any chance?
currently i have been successful in unlocking my bootloader. i followed this post http://forum.xda-developers.com/showthread.php?t=2313794 but instead of offline flashing, i rooted my phone and installed a BL CWM and flash 20c p760 europe, But now i need to get back to p768, what can i do? offline flashing doesnt work. im on JB and running windows 7 64bit
RedYeloGrin said:
currently i have been successful in unlocking my bootloader. i followed this post http://forum.xda-developers.com/showthread.php?t=2313794 but instead of offline flashing, i rooted my phone and installed a BL CWM and flash 20c p760 europe, But now i need to get back to p768, what can i do? offline flashing doesnt work. im on JB and running windows 7 64bit
Click to expand...
Click to collapse
Use the online flashing method...
Sir how can i install custom recovery for Unlocked BL because I think that adb/fastboot doesnt work in my pc
niggist said:
If your on jb or everything else is just not working you'll have to use the online method which only takes longer
Click to expand...
Click to collapse
Thats not true. Your phone has to be on for it to work on jellybean.
RedYeloGrin said:
currently i have been successful in unlocking my bootloader. i followed this post http://forum.xda-developers.com/showthread.php?t=2313794 but instead of offline flashing, i rooted my phone and installed a BL CWM and flash 20c p760 europe, But now i need to get back to p768, what can i do? offline flashing doesnt work. im on JB and running windows 7 64bit
Click to expand...
Click to collapse
Leave your phone on. DON'T turn it off and go into s/w. Enable USB debugging and connect to PC in lg mode.
Your phone will turn off on it's own and go into s/w.
Another thing, make sure the kdz file is spelled correctly. No lower case letters
V20B.kdz good
v20B.kdz bad
V20b.kdz bad
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
Thats not true. Your phone has to be on for it to work on jellybean.
Leave your phone on. DON'T turn it off and go into s/w. Enable USB debugging and connect to PC in lg mode.
Your phone will turn off on it's own and go into s/w.
Another thing, make sure the kdz file is spelled correctly. No lower case letters
V20B.kdz good
v20B.kdz bad
V20b.kdz bad
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sir now my problem is flashing custom recovery then rooting it because somehow i cant make fastboot work on my PC, im using windows 7 64bit, are there any methods of installing cwm and rooting without fastboot?
RedYeloGrin said:
Sir now my problem is flashing custom recovery then rooting it because somehow i cant make fastboot work on my PC, im using windows 7 64bit, are there any methods of installing cwm and rooting without fastboot?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2432752
you need root
have you used this fastboot
http://forum.xda-developers.com/showthread.php?t=2292828&highlight=fastboot